Chalmit 샬밋 Eclipse II Well-Glass 기술사양

 

안녕하세요 자동화닷컴입니다. 오늘 이 시간에는 샬밋라이팅의 방폭조명가운데 방폭위험지역 Zone2에서 적용되는 Chalmit Eclipse II Well-Glass 사양에 대해 살펴보겠습니다.

 

 

Chalmit  Lighting

Eclipse II Well-Glass
Ex n Luminaire
ATEX CATEGORY 3

 

The Eclipse II is a Zone 2 well-glass for high pressure discharge lamps of up to 400W.

 

 


It has a lightweight corrosion resistant aluminium body, heat resistant glass and stainless steel fasteners. It has been tested to IP66 and is suitable for use in harsh environments. The protection is Ex nA nR, incorporating a restricted breathing lamp chamber and a non-sparking control gear and terminal housing. This design removes the need for special cable or cable glands. The lamp glass has a screwed thread for quick access.

 

 

 

The control gear housing hinges on the mounting and termination cover and is held in position by a single screw barrel nut. The single screw barrel nut permits easy access and closure of the luminaire during installation and should maintenance be required. There is a range of wall, surface and stanchion mountings which may be integrated in the design. An enclosed reflector for highba applications is also available. A range of external reflectors is available to direct light efficiently to where it is required, please refer to the product datasheet for further details.

 

 

 

ATEX Certified

GOST R Approved

IECEx Compliant

 

 

 

 

CAT NO.

EC2N/050/HS

EC2N/070/MNS

EC2N/100/MS

EC2N/150/MS

EC2N/250/MS

EC2N/400/MS

EC2N/080/MV

EC2N/125/MV

EC2N/250/MV

EC2N/400/MV

E0850-0042

E0850-0044

E0850-0043

SEC20-0001

SEC20-0002

 

 

Technical Data(Datasheet)

EclipseII.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

  

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

+ Recent posts