Chalmit 샬밋 방폭형 Control Gear/Control Box/Gearbox 기술사양
안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명용 Chalmit Control Gear/Control Box/Gearbox 에 대해 살펴보도록 하겠습니다.
CHALMIT LIGHTING
Control Gear
Universal Box Remote Gearbox
Explosionproof
Zone 1Ex e Control Boxes
ATEX CATEGORY 2
The Universal Box is designed for use in both Zone 1 and Zone 2 hazardous areas. The universal gearbox replaces the 720 Ex e remote gearbox series used to supply floodlights without integral control gear. Where an ignitor is required it must be with the luminaire. The correction capacitors are in the control box.
The range also replaces the 700/702 Ex d control box but does not replace the 700/702 box with ignitor. The main range is for 150W to 600W hps lamps. These models also replace the 500/501 series Ex N gearbox but do not replace those gear boxes with internal ignitors. The universal transformer also replaces the 700 Ex d series transformer box the usual application of which is supplying 230V range control gear from 120V supplies.
The transformer is an auto design not a double wound design. It is for lighting applications not for electrical safety. The rating is 500 and 1000VA. Both the control gear and transformers have a built-in thermal cut-out which resets after the mains supply is switched off for a short period. This protection is needed for lighting control gear operating during possible lamp faults. This range will often be used as replacements for obsolete items using a variety of lamps. The IOM sent with each product and available on request contains essential information for correct application.
The range also replaces the 700/702 Ex d control box but does not replace the 700/702 box with ignitor. The main range is for 150W to 600W hps lamps. These models also replace the 500/501 series Ex N gearbox but do not replace those gear boxes with internal ignitors. The universal transformer also replaces the 700 Ex d series transformer box the usual application of which is supplying 230V range control gear from 120V supplies.
The transformer is an auto design not a double wound design. It is for lighting applications not for electrical safety. The rating is 500 and 1000VA. Both the control gear and transformers have a built-in thermal cut-out which resets after the mains supply is switched off for a short period. This protection is needed for lighting control gear operating during possible lamp faults. This range will often be used as replacements for obsolete items using a variety of lamps. The IOM sent with each product and available on request contains essential information for correct application.
ATEX Certified
GOST R Approved
CAT REF.
UNIE/1000/TF
UNIE/150/MS
UNIE/250/MS
UNIE/400/MS
UNIE/500/TF
UNIE/600/HS
UNIE/1000/TF
Technical Data (Datasheet)
UniversalBox.pdf
Notice : Specification are subject to change without notice.
주의사항 : 소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 및 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.
국내 기술지원 및 구매상담
CUSTOMER SUCCESS IDK
CS CENTER 010.5353.9110
'TIEx > CHALMIT' 카테고리의 다른 글
| Chalmit 샬밋 Protecta III Luminaire 기술사양 (0) | 2014.10.08 |
|---|---|
| Chalmit 샬밋 방폭형 Pyramid Low Bay 기술사양 (0) | 2014.10.08 |
| Chalmit 샬밋 Eclipse Junior Well-Glass 기술사양 (0) | 2014.10.07 |
| Chalmit 샬밋 Eclipse II Well-Glass 기술사양 (0) | 2014.10.07 |
| Chalmit 샬밋 261 Well-Glass 기술사양 (0) | 2014.10.06 |