Chalmit 샬밋 Zone2 Wellglass 라인업 소개

 

 안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명 가운데 위험지역 Zone2에 적용되는 Wellgalss 제품군에 대해 살펴보도록 하겠습니다.

 

 

 

1. Chalmit Lighting Eclipse II Well-Glass

Ex n Luminaire / ATEX Category 3

 

The Eclipse II is a Zone 2 well-glass for high pressure discharge lamps of up to 400W.

It has a lightweight corrosion resistant aluminium body, heat resistant glass and stainless steel fasteners. It has been tested to IP66 and is suitable for use in harsh environments. The protection is Ex nA nR, incorporating a restricted breathing lamp chamber and a non-sparking control gear and terminal housing. This design removes the need for special cable or cable glands. The lamp glass has a screwed thread for quick access.

 

The control gear housing hinges on the mounting and termination cover and is held in position by a single screw barrel nut. The single screw barrel nut permits easy access and closure of the luminaire during installation and should maintenance be required. There is a range of wall, surface and stanchion mountings which may be integrated in the design. An enclosed reflector for highbay applications is also available. A range of external reflectors is available to direct light efficiently to where it is required, please refer to the product datasheet for further details.

 

 

2. Chalmit Lighting Eclipse Junior Well-Glass

Ex n Luminaire / ATEX Category 3

 

The Eclipse Junior is a Zone 2 well-glass luminaire suitable for high pressure discharge lamps up to 70W and GLS lamps up to 150W.

It has a lightweight corrosion resistant aluminium body, heat resistant glass cover with stainless steel fasteners. The Eclipse Junior is tested to IP66 and is suitable for use in harsh and hazardous environments.

The protection method is Ex nAR incorporating a restricted breathing lamp chamber and an unrestricted control gear and terminal housing. This removes the need for special cable or glands. The lamp-glass has a screwed thread for quick access. The main enclosure containing the control gear hinges on the mounting part but is not fastened to it. This allows ready access to the terminals and the easy removal of the control gear and lamp enclosure if maintenance is needed.

There is a range of wall, surface and stanchion mountings integrated into the designs, please refer to the datasheet for further details. This small well-glass offers a compact lighting solution for use where all round lighting is needed in positions having limited space and access. 

 

 

 

 

Technical Data (Datasheet)

Eclipse II Hazardous.pdf

Eclipse Junior Hazardous.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

+ Recent posts