Baumer 바우머 Edge Sensors ZADM 023H151.0001 사양소개

Baumer 바우머 Edge Sensors ZADM 023H151.0001 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 바우머 포토센서 Edge sensors 제품군 가운데 ZADM 023H151.001 사양에 대해 살펴보도록 하겠습니다.

 

 

바우머 Baumer

Photoelectric Sensors

PosCon 

Edge Sensors

ZADM Series

ZADM023H151.001, ZADM 023H151.001

 

PosCon edge sensors are used to detect object widths and object positions. The position / width is issued as an analog value with high accuracy proportional to the overall measuring area. Although smaller than a deck of playing cards, the sensors contain not only the complete signal conditioning, but also a long-life illumination unit.

  

• Efficient: one sensor is able to measure objects on the complete width of a belt conveyor
• Measurement is possible on transparent objects and films
• The measuring area can be restricted by a simple Teach-in process to suppress interfering objects and areas
• Easy handling: The three different measuring modes (width, edge, center) can be set simply by a push of a button
• Two threshold values can be programmed with the Teach-in button and serve as tolerance limits for the switching output
• Flexibility: all functions available with the buttons can also be operated via an RS 485 interface
• The position and other information can be read via the interface 
• Robust housing

 

 

Operation

With the line sensors, the light of the integrated illumination is reflected by a reflective film (special film) installed opposite the sensor and is received by the diode line. The length of the diode line and the optics determine the measuring area. Due to the narrow diode line, the measuring area is also only a narrow band. If an object obstructs a part of the light, no light falls on the corresponding part of the diode line. The integrated microcontroller processes the shaded areas and the transitions from dark to light and calculates the corresponding analog value according to the measuring mode.

 

 

The PosCon has a diverging measuring field. This makes large measuring areas of up to 800 mm possible. The specified measuring area is achieved at the nominal distance. It becomes larger or smaller proportionally with the distance. This causes an object to appear larger or smaller according to the distance.

 

Mounting

The reflective tape specified in the documentation must be used for the PosCon. If the reflective tape is protected against abrasion by a Plexiglas or glass sheet, this must be tilted 7° to the sensor to ensure that the direct reflection does not reflect to the receiver

 

 

Technical Specifications

Measuring field size : 150mm

Measuring distance (to object) : 200mm

Measuring frequency : 500 Hz

Resolution : <0.15mm

Smallest object recognizable : 1.2mm

Linearity error relative : <0.3%

Light source : pulsed infrared diode

Wave length : 880nm

Adjustment : Teach-in

 

Application

Type : Measuring mode - edges, center, width

 

 

Edge detection

Control of textile, plastic or paper edges

Positioning of objects by the edge

Level measurement

 

 

Width measurement

Width inspection during the production of fabric and rubber bands

 

 

Center position

Position measurement by the object center, by which bands or

objects of different width can be aligned centrally to each other

 

 

 

 

 

 

 

Technical Data

Baumer, 바우머, PosCon, qTarget, Edge Sensors, ZADM, ZADM023H151.001, ZADM 023H151.001

ZADM_023H151_0001 Data Sheet.pdf

다운로드

ZADM023 Manual.pdf

다운로드

BRO PosCon3D 201404XX.pdf

다운로드

  

 

 

 

국내 기술지원 및 구매상담처

CUSTOMER  SUCCESS  IDK

salespro.idk@gmail.com

* 소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 및 상담은 공식대리점을 통해 진행해 주시기 바랍니다.  

Notice : Specification are subject to change without notice.