까다롭고 위험한 지역에서 실력을 발휘하는 호크케이블글랜드의 차별화된 특성 5가지

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 Hawke cable gland 가 Flameproof and Increased safety를 요구하는 Harsh and Hazardous Area를 만나 발휘되는 주요 장점 5가지를 살펴봅니다.

 

 

 

 

1. Unique Rear Sealing System
This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

 

2. Unique Inspectable Compound Chamber
The revolutionary Hawke compound chamber has been designed with
inspectability in mind. The pre-lubricated compound chamber can be removed
once the compound has fully cured, allowing full inspection of the flameproof seal. If required minor surface voids can be repaired in situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal, resulting in reduced piece parts, as there is no longer a requirement to separate the seal from the compound chamber.

 

 

 

 

 

3. Zero Cable Damage
The unique Hawke diaphragm sealing system does not damage cable with
'Cold Flow' characteristics. The diaphragm type seal is the only elastomeric seal to comply fully with EN 60079-14 and IEC 60079-14 and is therefore suitable on cables which would otherwise require barrier style cable glands.
The Hawke diaphragm seal is also unique in that it is the only flameproof
elastomeric seal that can be visually inspected in operation - A real benefit to
ATEX inspectors.

 

 

 


4. The Original Reversible Armour Clamp
The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accomodate all types of cable armour or braid. Unlike many of our competitors the correct clamping orientation is marked clearly with a 'W', 'Z' or 'X' and backed up by the presence of a groove in the component. Hawke's RAC clamping system is also fully inspectable when positioned on the cable.

 

 

 

 

 

5. Inspectable Deluge Seal
Hawke's inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01.

 

 

 

Indeed Hawke's deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which could potentially corrode the cable armour

 

 

 

 

 

 

 

기술문의 및 제품상담

고객성공  아이디케이

deric@jadongwha.com

www.tiatip.com

 

 

 

 

+ Recent posts