Hawke 623 Cable Gland (Group 1 Mining)

Hawke 623 Cable Gland (Group 1 Mining)

 

안녕하세요 TIATIP 입니다.

 

오늘 이시간에는 Hawke Mining Cable Gland Type가운데 623 시리즈를 살펴보겠습니다.

 

 

 

 

1. Backnut, 1.1. Rear Compressio Spigot, 1.2 Rear Seal

2. Middle Nut, 3. Pot Cap, 4. Rubber Pot, 5. Entry

 

 

Application

Mining.
For use with non-armoured elastomer and plastic insulated cables.
For particular use with :-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit ‘cold flow’ characteristics.
c) Enclosures containing an ignition source.

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to effect a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides a cable retention seal onto the cables outer sheath.

 

Materials & Finishes

The 623 cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel.
Brass NPT entries are nickel plated as standard.

 

Technical Data

Exd I Mb, Exe I Mb
Baseefa Certificate No. Baseefa08ATEX0329X.
IECEx Certificate No. IECEx BAS 08.0115X.
Suitable for use in Mines.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529.
Operating Temperature Range: -60°C to +80°C.

 

 

 

 

 

 

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com