Killark, Acceptor시리즈, Plugs, Receptacles, UGR/UGP Interchaneable Blade Style, PR22

 

안녕하세요 TIATIP 입니다.

  

 

 

The ACCEPTOR® UGP/UGR Plug and Receptacle system, with its unique,
patented design, is interchangeable1 with other NEMA bladed type explosion-
proof and dust ignition proof devices. The series has been tested
and classified for use with Crouse-Hinds® Ark-Gard®2 and Appleton® ULine
® plugs and receptacles in hazardous locations.

 

 

 

How The Acceptor System Works
ACCEPTOR receptacles contain an integral switch which must be closed to
energize the circuit. The design permits only an approved plug to be
energized. To actuate the switch, the plug must be inserted and rotated
clockwise approximately 45o. The plug will lock into this position preventing
accidental disengagement. To remove, simply push in then turn the plug counterclockwise and pull straight out.
Plugs and receptacles may be used where interchangeable bladed devices
are needed in locations made hazardous by the presence of flammable
gases or vapors, combustible dusts or easily ignitable fibers and flyings.
Plug can serve to provide power for portable equipment used in both
hazardous and non-hazardous areas.


Applications
• Petroleum Refineries
• Chemical Plants
• Wet/Damp Areas
• Corrosive Environments
• Petroleum Plants
• Grain Elevators/Feed Mills

• Flour and Feed Mills
• Indoor or Outdoor Locations


Features
• All external hardware is 316 stainless steel to provide low maintenance and long life
• Factory sealed chamber in UGR receptacle contains switch's arcing components
• No additional external seals are required,except in Group B applications
Quick Wiring Plug
• Single piece shell for fewer parts
• Transparent wiring entrance holes for easy conductor insertion
• Screws tighten from side with “full sized” screwdriver

 

Quick Wiring Plug
• Single piece shell for fewer parts
• Transparent wiring entrance holes for easy conductor insertion
• Screws tighten from side with “full sized” screwdrive

• Receptacles are U.L. Listed as raintight. Proper sealing against
moisture is assured
• Spring loaded receptacle cover closes when plug is removed to provide
protection when not in use
• Copper-free aluminum (less than 4/10 of 1%) alloy resists corrosion
• Electrostatically applied and baked powder epoxy/polyester finish

PLUG

ACCEPTOR® plugs conform to NEMA configurations and can be used with
standard receptacles in non-hazardous areas to maximize equipment utilization. The system's “turn to engage” feature locks in plug and can be used to prevent accidental disengagement of critical equipment.
Plugs for use with type S, SO, ST or STO heavy duty cord.

 

Catalog Number

UGP-15231, UGP-15231QW
UGP-15232, UGP-15232QW

UGP-20231, UGP-20231QW
UGP-20232, UGP-20232QW

UGRO-20231
UGR1-20231
UGR2-20231
UGR3-20231
UGR4-20231
UGR5-20231
UGR6-20231
UGROC-15231
UGR1C-15231
UGR2C-15231
UGR3C-15231
UGR4C-15231
UGR5C-15231
UGR6C-15231
UGRO-20232
UGR1-20232
UGR2-20232
UGR3-20232
UGR4-20232
UGR5-20232
UGR6-20232
UGROC-15232
UGR1C-15232
UGR2C-15232
UGR3C-15232
UGR4C-15232
UGR5C-15232
UGR6C-15232

UGRO-20231
UGR7-20231
UGR8-20231
UGR9-20231
UGR10-20231
UGR11-20231
UGR12-20231
UGROC-15231
UGR7C-15231
UGR8C-15231
UGR9C-15231
UGR10C-15231
UGR11C-15231
UGR12C-15231
UGRO-20232
UGR7-20232
UGR8-20232
UGR9-20232
UGR10-20232
UGR11-20232
UGR12-20232
UGROC-15232
UGR7C-15232
UGR8C-15232
UGR9C-15232
UGR10C-15232
UGR11C-15232
UGR12C-15232

UGRB1-20231
UGRB2-20231
UGRB3-20231
UGRB4-20231
UGRB5-20231
UGRB6-20231
UGRB1C-15231
UGRB2C-15231
UGRB3C-15231
UGRB4C-15231
UGRB5C-15231
UGRB6C-15231
UGRB1-20232
UGRB2-20232
UGRB3-20232
UGRB4-20232
UGRB5-20232
UGRB6-20232
UGRB1C-15232
UGRB2C-15232
UGRB3C-15232
UGRB4C-15232
UGRB5C-15232
UGRB6C-15232

 

 

Killark Plug Receptacle PR.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

+ Recent posts