호크 Hawke ICG 653/Universal Cable Gland 기술사양

호크 Hawke ICG 653/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 Hawke 케이블글랜드 가운데 Barrier Seal, Compound 타입으로 대표되는 ICG653/Universal (이하 ICG/653/UNIV) 시리즈를 살펴보도록 하겠습니다.

 

 

Hawke

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe / Dust Extb

Dual Certified ATEX - IECEx

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'cold flow' characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

 

 

 

 

 

 

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.

 

 

 

1. Unique Rear Sealing System

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection.

The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

2. The Original Reversible Armour Clamp

The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accommodate all types of cable armour or braid. Unlike many of our competitors, the correct stamping orientation is marked clearly with the armour size and backed up by the presence of a groove in the component. Our RAC clamping system is also fully inspectable when positioned on the cable.

 

3. Inspectable Deluge Seal

Our inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01. Indeed, our deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which prevents corrosion of the cable armour.

 

4. Unique Inspectable Compound Chamber

Our revolutionary compound chamber has been designed with inspectability in mind. The pre-lubricated compound chamber can be removed once the compound has fully cured, allowing full inspection of the flameproof seal. If required, minor surface voids can be repaired in-situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal.

Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for all armour/braid types.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

Materials & Finishes

The ICG 653/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

 

 

 

 

Technical Data

1.Exd IIC Gb, Exe II Gb, Extb IIIC Db

2.Certificate No's : Baseefa06ATEX0058X and IECEx BAS 06.0015X.

3.Suitable for use in:Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards:IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection:IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to:DTS01

7.Operating Temperature Range:-60°C to +80°C

8.Assembly Instruction Sheet:AI 301.

 

 

 

 

Hawke Accessories

 

 

 

 

Installation Guide

 

 

 

 

 

Technical Data

 

ICG653 UNIV Spec IDK.pdf

ICG653 Univ Note.pdf

ICG653 UNIV Assembly.pdf

ICG653 UNIV GHJ Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

Hawke Ordering Format [ Gland Type / Size / Thread / Options ]

 

Example without options : ICG 653/UNIV/C/M32

Example with alternative clamping ring option: ICG 653/UNIV/C/1¼"NPT/AR

 

ICG 653/UNIV/Os/M20

ICG 653/UNIV/O/M20

ICG 653/UNIV/A/M20

ICG 653/UNIV/B/M25

ICG 653/UNIV/C/M32

ICG 653/UNIV/C2/M40

ICG 653/UNIV/D/M50

ICG 653/UNIV/E/M63

ICG 653/UNIV/F/M75

ICG 653/UNIV/A/1/2"NPT

ICG 653/UNIV/A/3/4"NPT

ICG 653/UNIV/B/3/4"NPT

ICG 653/UNIV/B/1"NPT

ICG 653/UNIV/C/1"NPT

ICG 653/UNIV/C/1-1/4"NPT

ICG 653/UNIV/C2/1-1/4"NPT

ICG 653/UNIV/C2/1-1/2"NPT

ICG 653/UNIV/D/1-1/2"NPT

ICG 653/UNIV/D/2"NPT

ICG 653/UNIV/E/2"NPT

ICG 653/UNIV/E/2-1/2"NPT

ICG 653/UNIV/F/2-1/2"NPT

ICG 653/UNIV/F/3"NPT

 

 

 

 

 

 

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com