TnB 티앤비 Faulted Circuit Indicators UCMTL Series

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 티앤비의 Faulted Circuit Indicators 제품군 가운데, Underground Clamp Type의 UCMTL 시리즈 사양을 살펴보도록 하겠습니다.

 

 

 

 

Thomas&Betts, T&B, TnB,

Fisher Picrce

Faulted Circuit Indicators

UCMTL

UCMTL-LT

UCMTL-HT

 

 

 

 

Description :

UCM Series Underground Clamp Type Fault Indicator. Time reset with LED Display (Indicator auto-resets to normal after a four-hour time duration. (Indicator may also be manually reset using an FTT test tool)

 

 

 

 

Features :

- Universal one size fits all design automatically adjusts. No minimum load current requirement and no load surveys needed. Coordinates with current limiting fuses, as well as other protection devices. Prevents adjacent phase effects

- Faulted Circuit Display. Provision for Hotstick Installation and Removal. Spring loaded Mounted Clamps

 

 

Application : Underground

 

 

 

 

Technical Data & CAT No.

UCMTL, UCMTL-HT, UCMTL-LT, UCMTLHT, UCMTLLT,

Fisher Pierce UCMTL Product Overview 01 IDK.pdf

Fisher Pierce UCMTL Spec 01 IDK.pdf

Fisher Pierce UCMTL Product Overview 02.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark KDE Series Drain Breather 신제품 출시안내

 

안녕하세요 TIATIP 입니다. KILLARK(킬락)에서 새롭게 선보이는 Drain Breather, Breather Darin 제품군인 KDE Series에 대해 간략한 소개자료를 포스팅합니다.

 

 

Hubbell Harsh & Hazardous

KILLARK

KDE Series

Drain Breather / Breather Drain

for Harsh and Hazardous Environments

 

 

 

• cCSAus, ATEX, IEC Ex Certified for Class I Div. 2 & Ex e Zone 1 Hazardous Areas
• Small Compact Size With Low Profile-Supplied With 316 Stainless Steel Locknut
• Available in Fiberglass, 316 Stainless Steel, Aluminum & Brass
• Wide Chose of Thread Sizes, 1/2 NPT, 3/4 NPT, M20 & M25
• Type 4, 4X and IP66 Certified for Hose Down and Harsh Areas
• For Use in Ambient Temperatures Ranging From -55°C to +80°C

 

 

KDE Series Drain Breather

 

 

 

 

FEATURES-SPECIFICATIONS
Applications
When installed in the bottom of a thin wall enclosure the KDE allows water from
condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal.

 

 

Features
• Silicone o-ring supplied as standard and suitable for use in a -55°C to +80°C
temperature range.
• Varity of thread sizes 1/2 & 3/4 NPT, 1/2 & 3/4 NPSM, M20 & M25.
• Available in 300 series stainless steel, 316 stainless steel, aluminum and 30% glass filled nylon.
• Internal 316 stainless steel locknut supplied as standard. When tighten to
the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66
application.

 

 

Materials
• 303 or 304 stainless steel, 316 stainless steel, brass, aluminum or 30% glass filled nylon.
• Internal locknut 316 stainless steel.
• High temp silicone o-ring

 

 

 

 

Certificate

Class I, Div. 2, Groups A, B, C, D
Class l, Zone 1 & 2, Ex e / AEx e llC, A/Ex tb
Class II, Div. 1j & 2, Groups E, F, G
Class III, Ambient Temperature Range -55°C to +80°C
Enclosure Type 3, 4 & 4Xk IP66
Ex II 2 G D    CE 0539
Ex e IIC Gb
Ex tb IIIC Db IP66
Ta = -55°C to + 80°C


PATENT PENDING

CSA 2714851

CML 15ATEX3028X
IECE x QPS 15.0 0 0 2X 

 

 

Hubbell

Killark KDE Series Drain Breather

Catalog Number Logic : KDE - 1st   2nd   3rd

 

1st : Material Type

AL = Alum
BR = Brass
S3 = 303 Stainless Steel
S4 = 304 Stainless Steel
S6 = 316 Stainless Steel
GF = 30% Glass Filled Nylon

 

2nd : Plating Type

0 = Unplated
1 = Nickel
2 = Zinc
6 = Chromatise
8 = Electroles Nickel

 

3rd : Thread Size Type

M20 = M20 Metric
M25 = M25 Metric
050 = 1/2". NPT
075 = 3/4". NPT
050NPSM = 1/2". NPSM
0705NPSM = 3/4". NPSM

 

Technical Data

Breather Drain HKCS KDE.pdf

Breather Drain DPE Spec.pdf

Breather Drain FlameArrestor Cat 2014XXXX.pdf

Breather Drain CAT 2005XXXX.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

KILLARK HKH Series HAZCON Controls 신제품 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 KILLARK에서 새롭게 준비한 Local Control Station, HKH Series에 대해 살펴보도록 하겠습니다.

 

 

 

 

HUBBELL KILLARK

HKH Series HAZCON Controls

for Harsh and Hazardous Environments

Local Control Stations

Control Solutions for Global Applications With GUAD Approvals

HKH Series Non-Metallic & Stainless Steel Control Stations

 

 

 

 

Applications
• Hazardous and corrosive environments due to the presence of flammable gases or vapors, combustible dusts or ignitable fiber or flyings.
• Installations at petroleum refineries, chemical and petrochemical plants and other processing or storage facilities where similar hazards exist.
• Use in conjunction with motor starters or contactors for remote control of motors.

 

 

 

 

Features
• Operating Temperature of -50°C to +60°C
• Explosion Protected contact blocks as N.O. & N.C. capable of 20 Amps for Switching Duty and HP Ratings up to 1HP.
• LED Pilot Light modules for 12-254V AC/DC
• Contacts & Pilot lights can be mounted inside enclosure on Din Rail or in cover to the actuator.
• Accessories for Lockout/Tag Out functions made in 316 stainless steel also available.
• Cover screws and terminal screws supplied for use with Slotted, Phillips #2 or Robertson screwdrivers.
• Captive Stainless Steel Cover Screws.
• Terminal Block connection option.

 

 

 

 

HKH Series Non-Metallic sizes
1a, 1b & 1c up to three devices in cover

 


• Low profile side walls for ease of wiring.
• Entry sizes of 1/2”, 3/4”, M20, M25 and 2 x M20. Brass ECP optional for metric sizes.


• Contact blocks 1 N.O. & 1 N.C. with 20A current capacity for switch duty.

• Contact blocks rated for up to 1HP @ 277V.

 


• LED Pilot lights 12-254Vac/Vdc for use with red, green, amber, blue & clear lens assemblies.
• Actuators and electrical modules can be mounted on din rail or panel mounted to actuator on cover.

• Terminals on contact blocks and pilot light modules rated for 1-2 #22-#10AWG, (1-2 0.5-4mm2) conductors.

 

 

HKH Series Non-Metallic sizes
2a & 2c from two to six devices in cover and entry sizes of 1/2”, 3/4”, M20, M25, M32, 2 x M20 or 2 M25. Side entries also available.

 

 

 

 

HKH Series 316 Stainless Steel sizes
1a, 1b & 1c up to three devices in cover


• Entry sizes of 1/2”, 3/4”, 1”, M20, M25 and 2 x M20.
• Two styles of enclosures offered; standard flange in, and when more access room required, flange out.

 

 


• Contact blocks 1 N.O. & 1 N.C. with 20A current capacity for switch duty.
• Contact blocks rated for up to 1HP @ 277V.
• LED Pilot lights 12-254Vac/Vdc for use with red, green, amber, blue & clear lens assemblies.

 

• Actuators and electrical modules can be mounted on din rail or panel mounted to actuator on cover.
• Terminals on contact blocks and pilot light modules rated for 1-2 #22-#10AWG, (1-2 0.5-4mm2) conductors.

 


HKH Series 316 Stainless Steel sizes
2a & 2c from two to six devices in cover and entry
sizes of 1/2”, 3/4”, 1” M20, M25, M32, 2 x M20 or 2 x M25. Side entries also available. Standard flange in & flange out design offered.

 

 

CAT Number and Technical Data

HAZCON, LCS, Local Control Station, Local Controls, KILLARK Controls, HKTF, HKH, HKH Series

 

KILLARK LCS HKTF HKH.pdf

 

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

카테고리

TI Story (959)
TIA (92)
TIP (194)
TIEx (603)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)