Baumer CleverLevel Switch - 거품층(버블/Bubble layer)인식 애플리케이션

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 바우머의 스마트타입, CleverLevel Switch 를 활용한 세부 프로그래밍(세팅/티칭)으로 거품층(버블/Bubble layer) 을 인식하는 적용사례를 공유합니다. FlexProgrammer 를 이용하여 손쉽게 스위칭의 범의를 다양하고 세분화하여 운영하거나 상태변화를 모니터링 할 수 있습니다.

 

예를들어, 미디어가 유체인경우, 다양한 유체에 대하여 유체의 유무, 센서끝단의 오염이나 잔유물에 의한 간섭무시, 거품(버블)의 인식, 유체성질의 변화정도 등등을 현장의 니즈에 따라 간단한 티칭으로 안정적인 검출이 가능하다는 특장점을 갖고 있습니다.

해당 레벨스위치는 일반산업의 수처리분야, 식음료, 보틀링, 위생 부문 등등에서 파이프 및 탱크등의 다양한 레벨측정에 적용될 수 있으며, 어떠한 유체라도 하나의 센서에서 폭넓은 대응이 구현됩니다.

Baumer CleverLevel

LBFS Series and LFFS Series

The really clever alternative to the vibrating fork level switch.
The really clever alternative With Baumer’s CleverLevel series, you can
enter into a new era of level detection technology that is convenient, precise, easy and maintenance free.

 

 

 

 

CleverLevel – one product to meet all your detection needs!

 

Always the right level detection – the vibrating fork alternative.

The widely used vibration level switches have vibrating forks that are quite large and which protrude quite a ways into the material being
measured.

 

Since pasty materials are prone to stick to these forks, it can often cause measuring errors. Coarse granular media such as grains can easily become lodged between the forks and also cause measuring errors. Moreover, not only are the forks difficult to clean, but liquid and powder substances even
require different fork designs.

 

With the sensors of the CleverLevel switch, no media remnants or solids are able to accumulate on the sensors. A precise and reliable level detection is thus ensured even under difficult circumstances.

 

 

 

 

The perfect solution for your applications

Level detection for storage tanks, containers and pipelines
Storage, buffer and filling tanks are generally equipped with switches for detecting high and low filling levels. The sensor’s short response time facilitates precise and reliable level control.

 

Detection of different media and phase separation
In certain processes, the material appears in different phases. These can either be identified (e.g. oil on water) or their measurement might be masked (e.g. foam layer).

 

 

 

 

Detection of contaminants in media
Contamination of media is not only an issue for food production.
Catching it early on in the process is economically advantageous.
For example, remnants of cleaning agents can be reliably detected in liquid
food products long before any subsequent processing takes place.

 

Protecting pumps from running dry
Pumps running dry is a critical process problem because it can lead to dosing deviations or damages. These challenges can be resolved even if the media is viscous or sticky.

 

 

 

 

Reliable filling level regardless of the media

Today, numerous industrial facilities are monitored and controlled around the clock with an automated system. Liquids and bulk goods are often involved in industrial processes where it is necessary to detect their respective fill levels. This is also the case in trains and ships where tanks and hydraulic machines need to be controlled.

 

Based on the frequency sweep technology, our CleverLevel LBFS switches are suitable for high-viscosity fluids as well as for solid or liquid media. Their compact sensor tip allows them to be integrated even in small pipes.

 

Since they are unaffected by turbulence, sedimentation, air bubbles, foam and even by suspended or floating particles, they are suitable for even the most difficult applications.

 

 

When it has to be hygienic – we have a clean solution for you

According to the high-quality housing materials such as high-grade stainless steel and PEEK, our sensors meet all requirements for the food and beverage industry as well as the pharmaceutical industry.

 

The tip of the sensor is made of a special, approved PEEK plastic that only protrudes 15 millimeters into the process. The possibility of the sensor causing flow blockages or undesired shadows can thus be excluded.

 

Starting up the sensor is as easy as the operation itself. All media are detected using factory settings. If you need to use the extended functions e.g. media seperation or PWM the switches are easily configured thanks to Baumer’s
FlexProgrammer.

 

 

 

 

One sensor for all applications

One sensor detects different media With pulse width modulation (PWM), you are able to detect different media in the same processing line or processing tank to differentiate the final product (e.g.different kind of fish sauce, different style of beer, etc.). The process uses an analog time signal that facilitates continuous measurement. The time signal changes according to the DK (dielectric constant) value of the media.

 

 

 

 

Technical Data and CAT No.

Baumer, CleverLevel, Level Switch, Level Sensor, LBFS, LFFS,

Baumer CleverLevel LBFS LFFS BRO 201208XX.pdf

CleverLevel LBFS DataSheet 20140512.pdf

CleverLevel LFFS Datasheet 20120820.pdf

Level_Switch_LBFS_Installation_320140_EN_01.pdf

LFFS_Installation_5850-020_EN.pdf

7.Accessories.pdf

6.FlexProgrammer_9701.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

  

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (957)
TIA (92)
TIP (194)
TIEx (601)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)