KILLARK EXB-Lite EXBLT Series 2018 신제품 론칭안내

 

안녕하세요 TIATIP 에디터입니다. 이번에 킬락 KILLARK 의 대표적인 방폭박스이자 국내 고객들에게도 친숙한 EXB 시리즈의 성원에 힘입어, 이번에 높은 작업현장 및 공간에서 유용한 가볍고 경제적인 EXB Lite 버전이 출시되었습니다. 오늘 이시간에는 유럽지역과 아시아에서 벌써부터 많은 관심과 반응을 보이고 있는 EXBLT Series 에 대해 관련 자료를 포스팅합니다.

 

 

Hubbell

KILLARK Enclosures for Harsh and Hazardous Environments

EXB LITE, EXBLT Series

 


Bolted enclosures for use in areas that are hazardous due to the presence of flammable gases and vapors. Combustible dust, or easy ignitable fibers and flyings. Locations that are corrosive, wet, hose down, dust, dirty, for both hot and cold industrial applications.

 

• Pulp & Paper Mills
• Breweries
• Electrical Power Plants
• Refineries
• Petrochemical Plants
• Chemical Plants
• Wastewater Treatment
• Grain Facilities
• Marine, Docks, Ports
• Coal Handling
• Off Shore Platforms
• Pumping Stations
• Textile manufacturing
• Food Processing
• Used to link electrical wires. Provide access to conductors for maintenance and system expansions
• Primary circuits for distribution to field control devices.
• Enclosure to house control stations, meters, relays, motor starters circuit
breakers, terminal blocks and other electrical equipment.
• Enclosures are available blank for field modifications or with factory
modifications, options and accessories.

 

 


Features
• The EXBLTP series is up to 35% light than the EXB Series enclosures.
• Copper free cast / plate aluminum construction. High strength, lighter in
weight, highly corrosion resistant.
• Choice of two covers, flat aluminum plate cover, EXBLTP, or the original aluminum sand casts cover, EXBLTC.
• Fewer cover bolts – reduces installation and maintenance time. Offered in Plated Carbon Steel, 316SS and 316SS Tri-Lead for quicker access.
• Gasketed cover flange as standard. Nitrile (BUNA-N) “O” ring gasket is located inside the bolt circle to prevent water from seeping into the enclosure.
• Ductile mounting lugs. Lugs are made of a ductile aluminum alloy to adjust to irregular mounting surfaces without damaging the enclosure. EXBLTs 8x12x6x and larger supplied with bi-directional mounting pads. Lugs can installed either horizontal or vertical by the factory or in
the field. Easily replaced if damage does occur.
• Hinges supplied as standard on the 6x12x4, 6x12x6 8x12x6 and larger as a standard. Smaller sizes can be ordered with hinges by adding SU2 to the catalog number. Hinges can be mounted on any of the 4 sides.
• Enclosures can be drilled and tapped with conduit openings up to 2” NPT or M63 openings, factory or field.

• Covers both plate and cast can be drilled and tapped for G Series control
operators openings and EXH disconnect handles, factory or field. The original aluminum sand casts cover, EXBLTC, can be provided with the GLXR rectangular viewing windows and the GL round threaded viewing windows.
• Cover flanges supplied with recessed notches for prying the covers open
without damaging the ground flame path.
• The mounting pan bosses are pre-drilled for the factory or field installation of the optional back pans

 

 

 

 

Material/Finish
• Box: Molded from 356-T6 copper free aluminum, less than 4/10 of 1% copper alloy and less than 6% magnesium.
• Cover: EXBLTP plate cover is made of 6061-T6 aluminum alloy.
• Cover: EXBLTC cast from 310 copper free aluminum, less than 4/10 of 1% copper alloy and less than 6% magnesium.
• Bolts: Plated carbon steel.
• Hinges: Extruded aluminum with stainless steel pin and hardware.
• Optional: Mounting pans sheet aluminum 6061-T6 or 5052-H34.
• Optional: Viewing windows tempered soda lime glass.
• Finish: Enclosures supplied natural without paint.

 

 

Technical Data

Hubbell, Killark, EXB, EXBLITE, EXBLT, Junction Box, Enclosure, 허벨, 킬락, 방폭박스, 방폭주물박스, EXD박스, d박스, 킬락박스, UL방폭박스, ATEX방폭박스, IECEx방폭박스

EXBLT 20180118 DS IDK EN.pdf

Killark Enclosure EXB Series IDK 2015XXXX.pdf

5.Killark Enclosures IDK E.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.  

 

 

  

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

파나소닉 Panasonic UV 램프 ANUPS204 신형패키지 소개자료

 

들리시나요? 느껴지시나요? 성큼 봄이 찾아오고 있습니다. 반갑습니다. TIATIP 에디터입니다.

 

오늘 이 시간에는 파나소닉 Panasonic UV Spot 경화기용 UV램프 ANUPS204 의 신형패키지와 관련하여 파나소닉 정품 이미지 자료를 소개드리고자 합니다.

 

최근 저가 저품질의 수준 낮은 제품들이 정품인것처럼 시장내 고객들의 혼란을 야기하고, 심지어 장비트러블 및 현장불편과 품질문제의 이슈이자 원인이 되고 있습니다. 이점 유념하시어, Panasonic 정품사용을 적극 제안드립니다.

겉포장뿐만아니라, 실제 제품상의 표기에 대해서도 반드시 주의/확인을 당부드립니다.  

 

ANUPS204(ANUPS-204) 신형 패키지 - 단위포장 이미지 전면, QR코드, 라벨

 

ANUPS204(ANUPS-204) 신형 패키지 - 단위포장 이미지 후면, 메뉴얼자료

 

 

ANUPS204(ANUPS-204) 신형 패키지 - 단위포장 구성 및 제품

 

 

ANUPS204(ANUPS-204) 신형 패키지 - 단위포장 속 제품이미지

 

ANUPS204(ANUPS-204) 신형 패키지- 브랜드명, 품번, 시리얼번호, 로트번호

 

 

ANUPS204(ANUPS-204) 신형 패키지- 브랜드명, 품번, 시리얼번호, 로트번호

 

 

 

 

참고로 ANUPS204의 구형 패키지구성은 하기와 같습니다.

UV Lamp, UL LED Head, UV Controller, UV Light Guide, Lens Unit, Connection Cable, Power Adapter 등 UV경화시스템을 연결하고 구성하는 유닛 및 소모품 구입과 검토시에는, 반드시 UV경화시스템 전반의 성능과 품질보증 및 A/S대응이 불가하게 되는 상황 및 품질과 작업자의 안전문제, 현장사고를 야기할 수 있는 저가 저품질의 모조제품 및 유사제품에 각별히 유의해주시기 바랍니다. 반드시 Panasonic 정품을 사용해주시기 바랍니다.

 

 

Technical Data

Panasonic, Nais, Aicure, ANUP, ANUPS, ANUPS204, ANUPS-204, ANUJ, ANUP5204, UP5204, UP5204, UP50, UD40, UD90, UJ20, UJ30, UJ35, UV경화기, 자외선경화기, UV램프, 파나소닉UV램프, UV SPOT경화기, UV LED경화기

Panasonic Nais IDK Aicure LAMP Spot UP50 201101XX.pdf

Panasonic Nais Aicure ANUP5204 EN 200402XX.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.  

 

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com


 

Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark Quick Sealing Compound CELOX KOS Series 2018 신제품 소개자료

 

안녕하세요 TIATIP 에디터입니다. 겨울과 봄사이 비가 한 차례 내리더니 우리곁에 봄이 성큼 다가와 있는 것 같습니다. 행복한 하루 보내시길 바랍니다.

 

오늘 이시간에는 킬락(KILLARK) 에서 새롭게 개발된 Quick Sealing Compound 제품을 소개드리고자 합니다. 환경성과 작업편의성이 고려된 제품으로 기존타입의 대응이 부족한 부분이 탁월하게 보완되어, 새롭게 출시되었습니다.

 

Hubbell

Killark - CELOX KQS Series

Quick Sealing Compound for Harsh and Hazardous Environment

 

 

 

 

 

1. Sealing Compound

CELOX™ KQS Series is an alternative quick sealing compound used extensively for sealing conduit to prevent the spread of explosive gases and vapors. It is a two part epoxy resin that is self-mixed when pushed
through a patented static mixing nozzle.

 

CELOX™ requires no mixing, measuring, stirring, or pumping prior to pouring a seal. This series is UL recognized for use with Killark seals and resists acids, water, oil, etc. The CELOX™ KQS series offers ultimate ease of use as each cartridge is reusable to prevent the loss of wasted time and product.

 

Features: CELOX™
• Two cartridges sizes, 250ml (8.45oz) and 50ml (1.7oz) for convenience of various seal-off sizes
• Two part epoxy resin is pushed through a patented wedged element design nozzle to form a perfect mix
• Each cartridge comes with 4 patented static mixing nozzles
• 250ml cartridge comes in a single barrel with a 2 chamber internal compartment that allows for more compact storing and use
• Cartridge dispensing guns and spare nozzles are available as ordering options
• 250ml fills over eight ½” conduit seals

 

Features: Dispensing Guns
• 250ml dispensing gun is a single barrel caulking style with high spring tensions for ease of squeezing
• 50ml dispensing gun is has an easy sliding mechanism for quick installation


Features: Mixing Nozzles
• Patented static mixing nozzles has innovated wedge design to allow self-mixing while being squeezed through

 

 

2.  Sealing Compound

 

 

SC Series Sealing compound is a cement used extensively for sealing conduit to prevent the spread of explosive gases. It is non-shrinking and a secure seal is formed. SC Series resists acids, water, oil, etc. It is
UL Listed for use with Killark ENY, EY, and EYS Series. Also CSA certified for use with any CSA certified sealing fitting.

 

Features
• Exact amount of compound and water are packaged together into a twocompartment plastic pouch.
• The precise amount of compound and water are available for mixing. No mixing or measure implements are required.
• Squeezing the inner water container forces the water into the compartment containing the sealing compound. Complete mixing takes place inside the plastic pouch.
• The mixed sealing compound can be poured directly into the sealing fitting. A tubular straw is provided for those difficult seals to reach.
• The package label indicates the size and quantity of sealing fittings each pouch will properly fill.

 

 

3. Series SC/PF/LUBG
(1) Sealing Compound


SC Series Sealing compound is a cement used extensively for sealing conduit to prevent the spread of explosive gases. It is non-shrinking and a secure seal is formed. SC Series resists acids, water, oil, etc. It is UL Listed for use with Killark ENY, EY, and EYS Series. Also CSA certified for use with any CSA certified sealing fitting.

 

 

(2) Packing Fiber


Killark’s Packing Fiber is made from an environmentally safe, non-asbestos
material. It is easy to use and forms a positive dam to hold compound (Killark SC Type) in ENY, EY, and EYS Series fittings.

 


(3) Threaded Lubricants


Two special blends of lubricants have been developed by Killark for use with threaded joints. These lubricants are to be used to prevent galling of pipe threads when threaded into a coupling, junction box, etc. They insure
a quick release of undamage male and female threads when parts are disassembled.
• LUBG is a general purpose lubricant to be used in temperatures ranging from 0° to 125°F.
• LUBT is a high-quality lubricant to be used in temperatures ranging from -40° to +500°F. It is recommended to be used on hazardous location lighting fixtures.

 

 

 

 

 

 

Technical Data

Hubbell, Killark, 허벨, 킬락, CELOX, KQS Series, KQS, SC, Sealing Compound, Packing Fiber, Thread Lubricant, Seal Fitting

CELOX KQS 20171017 EN.pdf

6.Killark Fittings IDK F.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.  

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

카테고리

TI Story (972)
TIA (98)
TIP (194)
TIEx (609)
TIS (36)
TiNoTe (10)
TIO (23)
The OtherS (1)