'방폭'에 해당되는 글 114건

  1. 2017.03.08 KILLARK EXB70 Series Motor Starters 소개자료
  2. 2015.07.17 HAWKE Exd Connectors for Harsh and Hazardous Locations 신제품 소개
  3. 2015.05.15 Killark KDE Series Drain Breather 신제품 출시안내
  4. 2014.12.17 Chalmit ARRAN Exn LED Floodlight 기술사양
  5. 2014.12.17 Chalmit Protecta Exe LED Linear Fluorescent Replacement 기술사양
  6. 2014.12.17 Chalmit SCOTIAEx Exde LED Floodlight 기술사양
  7. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개
  8. 2014.11.01 Chalmit Light 샬밋라이트 Industrial Fluorescent 제품라인업 소개
  9. 2014.10.10 Chalmit 샬밋 방폭위험지역 Zone2에 적용되는 Bulkhead 라인업 소개
  10. 2014.10.10 Chalmit 샬밋 방폭위험지역 Zone1에 적용되는 Bulkhead 라인업 소개
  11. 2014.10.08 Chalmit 샬밋 Sterling II Emergency Stainless Steel Luminaire 기술사양
  12. 2014.10.08 Chalmit 샬밋 Sterling II Luminaire 기술사양
  13. 2014.10.08 Chalmit 샬밋 Acclaim Recessible Luminaire 기술사양
  14. 2014.10.08 Chalmit 샬밋 Protecta III Luminaire 기술사양
  15. 2014.10.08 Chalmit 샬밋 방폭형 Pyramid Low Bay 기술사양
  16. 2014.10.08 Chalmit 샬밋 방폭형 Control Gear/Control Box/Gearbox 기술사양
  17. 2014.10.07 Chalmit 샬밋 Eclipse Junior Well-Glass 기술사양
  18. 2014.10.06 Chalmit 샬밋 238 Well-Glass 기술사양
  19. 2014.10.06 Chalmit 샬밋 Nexxus Bulkhead 기술사양
  20. 2014.10.06 Chalmit 샬밋 Nevis LED Bulkhead 기술사양
  21. 2014.10.06 Chalmit 샬밋 Nevis Bulkhead 기술사양
  22. 2014.10.04 Chalmit Lighting 샬밋라이팅 Micronex and Maxinex Floodlights 기술사양
  23. 2014.07.05 Hawke ATEX INLINE Connector, ControlEx Termination Hook up Procedure 자료
  24. 2014.07.05 Hawke Exd Connector, MK IV ControlEx 기술사양
  25. 2014.07.05 Hawke Exd Connector, InstrumEx 기술사양
  26. 2014.07.05 Hawke Live Demateable Connector, InstrumEx Termination Hook up Procedure 자료
  27. 2014.07.05 Hawke Power Connector, PowerEx Termination Hook up Procedure 자료
  28. 2014.07.05 Hawke Exd Connector, PowerEx 기술사양
  29. 2014.06.18 Hawke Thread Conversion Solutions Fixed Elbows 496(F to F) Series 기술사양 소개 (UPD20140531)
  30. 2014.06.18 Hawke Thread Conversion Solutions Fixed Elbows 495 (M to M) Series 기술사양 소개 (UPD20140531)

KILLARK EXB70 Series Motor Starters 소개자료

 

안녕하세요 TIATIP 입니다. 어느덧 봄이 우리앞에 다가서 있습니다.

KILLARK 킬락에서는 이번에 새로운 방폭위험지역에서 사용가능한 모터스타터 구성을 선보이고 있는데요. 다음과 같이 간단히 살펴보고자 합니다.

 

 

HUBBELL Harsh & Hazardous

KILLARK

EXB70 Series

Motor Starters for Harsh and Hazardous Environments

 

 

MOTOR STARTERS TO MEET THE GLOBAL DEMANDS
FOR HARSH & HAZARDOUS LOCATIONS
BOTH ON SHORE AND OFF SHORE APPLICATIONS

 

 

Killark offers a wide range of motor starters supplied with internal motor controllers from leading internationally recognized control manufacturers. We provide across the line magnetic starter only, combination magnetic starters and manual starters with both NEMA and IEC controllers.


Applications include Explosion / Flame Proof, Hazardous Dust, Wet, Hose Down and Corrosive environments on shore and off shore.

 

 

 

 

Applications
The EXB70 Series of across-the-line starter and combination motor control centers utilize SSNR (single speed non-reversing) IEC starters. The EXB70 starters is for use in locations made hazardous due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers and flyings, and areas which are subject to corrosion, weather and dampness.
• Petroleum Refineries
• Oil Rigs & Platforms
• Chemical/Petrochemical Plants
• Pharmaceutical Facilities
• Automotive Repair Facilities
• Aircraft Facilities
• Wet/Corrosive Environments
• Grain Elevators
The EXB70 Series is offered with the ABB brand AF contactor / TF overload relay, XT circuit breakers and motor circuit protectors.

 


Materials
• Box & cover: Cooper free aluminum (less than 4/10 of 1%)
• Finish: Aluminum lacquer paint – Grey
• O-Ring Gasket Material: Nitrile (BUNA-N) compound
• Stainless steel, A2, cover screw.
• CB/MCP Handle – Copper free aluminum
• Reset Operator – Thermoplastic polyester button molded onto stainless steel shaft. Aluminum shroud, black anodized.

 

 

Features
• Copper free cast aluminum construction. High in strength, lighter in weight, corrosion resistant

• Stainless steel metric cover bolts
• Cover o-ring supplied as standard for TYPE 4X and IP66 applications.
• Starters supplied with hinged covers as standard
• Bi-directional bolt on mounting lugs made from a ductile aluminum alloy which will adjust to irregular surfaces without causing damage to the casting.
• Starter only supplied as standard with a manual reset button and two future control operator openings with plugs.
• Combination starter supplied as standard with a manual reset button, through the door circuit breaker handle and two future control operator openings with plugs.
• Each starter comes with three NPT conduit openings in both the top and in the bottom allowing for power, control and drain/breathers.
• The EXB70 can be ordered with custom sizes & quantity of holes both in NPT and metric.
• Additional control operators can be supplied along with addition future operator openings.

 

 

Technical Data

Hubbell, Killark, Harsh & Hazardous, Explosion proof, EXB, EXB70 Series, B70 Series, B7MS Compact Series, B7MSN Compact Series, XS Series, FXS Series, Motor Starters, 허벨, 킬락, 방폭박스, 방폭외함, 모터스타터, 모터스타터박스, 모터컨트롤박스

EXB70 Motor Starter 201701XX EN.pdf

5.Killark Enclosures IDK E.pdf

4.Killark Distribution IDK DE.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

HAWKE Exd Connectors for Harsh and Hazardous Locations 신제품 소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 호크(HAWKE)에서 2015년 5월 5일자로 새롭게 출시된 방폭커넥터의 업그레이드 사양을 소개드리고자 합니다. 기존의 까다롭고 다양한 환경에서 요구되었던 고객님들의 니즈가 최대한 반영되어 출시된 이번 제품군은 보다 안전하고 유연한 연결솔루션을 제공하고 있습니다.

 

HAWKE

Hazardous Area Connectors

InstrumEx, ControlEx and PowerEx Series

 

 

Common Features

There are several innovative features common across the range of Hawke connectors. Despite their highly advanced design and technical features, the range is extremely simple to use and quick to terminate.

 

 

Impossible to cross mate

The unique mechanical keying system prevents contact damage and ensures safe use by eliminating the possibility of misconnection of circuits. Machined key and keyway also ensures connector alignment

 

 

 

Ingress and deluge protected

All Hawke ATEX connectors meet the requirements of IP66 and IP67 to IEC60529. They are also deluge protected to DTS01 offering long term protection in onerous environments..

 

 

 

High reliability contacts

Each pin and socket is fitted with multilam technology to ensure reliable low resistance connection on each coupling

 

 

 

Retro fit flange option

Each connector plug and receptacle can be fitted with an optional mounting flange, either at point of order or retro fitted as required, allowing easy mounting of the connectors without the need to disassemble the units

 

 

 

Robust design

Designed and constructed for the most demanding environments, Hawke connectors are durable in almost any environment, requiring no routine maintenance to ensure continued performance.

 

 

 

 

 

Selection Overview

Hawke International connectors are ideal for use in hazardous areas commonly found in Oil and Gas exploration, production and process plants. Their features, however, also offer numerous benefits in explosive dust environments as well as harsh and hostile non-explosive applications where temporary but safe disconnection of power is critical. Hawke International’s Ex range
of connectors permit the safe and rapid service, repair and replacement of key plant, provide quick connection to temporary and permanent equipment and greatly reduce hook-up time in capital-intensive processes.


For a guide as to which Ex connector may be best suited to an individual application the table below outlines the main variables.

 

 

 

HAWKE INSTRUMEx

Tamb: -40°C to +60°C II2 GD Exdbe IIC Extb IIIC Db T85
IP66, 67 & DTS01 deluge protected
Certificate No's Baseefa06ATEX0061X & IECEx BAS 06.0018X

 

 

This revolutionary design allows the live mate and de-mating of signal and low
power in hazardous areas safely and quickly. The Instrum connector is available in two sizes. The 4-way and the 9-way options will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC and 2.5A (DC1) 60V DC. The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC and 0.5A (DC1) 60V DC. Instrum connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.

 

 

HAWKE CONTROLEx 

Tamb: -40°C to +60°C II2 GD Exdb IIC Gb, Extb IIIC T95Db
IP66, 67 & DTS01 deluge protected

Certificate No's Baseefa12ATEX0144X & IECEx BAS 12.0006X

 

 

The 4th generation of Control connectors include many features and
refinements as a result of consumer feedback, which makes them particularly
suitable for control and low/medium power applications. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 750V.

 

 

HAWKE POWEREx

 

Tamb: -40°C to +60°C II2 GD Exdb IIC Extb IIIC Db T85
IP66, 67 & DTS01 deluge protected
Certificate No's Baseefa06ATEX0062X & IECEx BAS 06.0019X

 

 

The Power range of connectors have been designed specifically for the
extremely demanding requirements of higher power applications. Inserts are
available with 1 to 4 contacts with a conductor acceptance range of between
50mm² and 630mm² operating up to 780A and 750V as standard. Other voltages
available on special request.

 

 

 

 

Technical Data

HAWKE, Ex Connectors, InstrumEx, ControlEx, PowerEx

HAWKE Ex Connectos New CAT 20150505.pdf

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark KDE Series Drain Breather 신제품 출시안내

 

안녕하세요 TIATIP 입니다. KILLARK(킬락)에서 새롭게 선보이는 Drain Breather, Breather Darin 제품군인 KDE Series에 대해 간략한 소개자료를 포스팅합니다.

 

 

Hubbell Harsh & Hazardous

KILLARK

KDE Series

Drain Breather / Breather Drain

for Harsh and Hazardous Environments

 

 

 

• cCSAus, ATEX, IEC Ex Certified for Class I Div. 2 & Ex e Zone 1 Hazardous Areas
• Small Compact Size With Low Profile-Supplied With 316 Stainless Steel Locknut
• Available in Fiberglass, 316 Stainless Steel, Aluminum & Brass
• Wide Chose of Thread Sizes, 1/2 NPT, 3/4 NPT, M20 & M25
• Type 4, 4X and IP66 Certified for Hose Down and Harsh Areas
• For Use in Ambient Temperatures Ranging From -55°C to +80°C

 

 

KDE Series Drain Breather

 

 

 

 

FEATURES-SPECIFICATIONS
Applications
When installed in the bottom of a thin wall enclosure the KDE allows water from
condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal.

 

 

Features
• Silicone o-ring supplied as standard and suitable for use in a -55°C to +80°C
temperature range.
• Varity of thread sizes 1/2 & 3/4 NPT, 1/2 & 3/4 NPSM, M20 & M25.
• Available in 300 series stainless steel, 316 stainless steel, aluminum and 30% glass filled nylon.
• Internal 316 stainless steel locknut supplied as standard. When tighten to
the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66
application.

 

 

Materials
• 303 or 304 stainless steel, 316 stainless steel, brass, aluminum or 30% glass filled nylon.
• Internal locknut 316 stainless steel.
• High temp silicone o-ring

 

 

 

 

Certificate

Class I, Div. 2, Groups A, B, C, D
Class l, Zone 1 & 2, Ex e / AEx e llC, A/Ex tb
Class II, Div. 1j & 2, Groups E, F, G
Class III, Ambient Temperature Range -55°C to +80°C
Enclosure Type 3, 4 & 4Xk IP66
Ex II 2 G D    CE 0539
Ex e IIC Gb
Ex tb IIIC Db IP66
Ta = -55°C to + 80°C


PATENT PENDING

CSA 2714851

CML 15ATEX3028X
IECE x QPS 15.0 0 0 2X 

 

 

Hubbell

Killark KDE Series Drain Breather

Catalog Number Logic : KDE - 1st   2nd   3rd

 

1st : Material Type

AL = Alum
BR = Brass
S3 = 303 Stainless Steel
S4 = 304 Stainless Steel
S6 = 316 Stainless Steel
GF = 30% Glass Filled Nylon

 

2nd : Plating Type

0 = Unplated
1 = Nickel
2 = Zinc
6 = Chromatise
8 = Electroles Nickel

 

3rd : Thread Size Type

M20 = M20 Metric
M25 = M25 Metric
050 = 1/2". NPT
075 = 3/4". NPT
050NPSM = 1/2". NPSM
0705NPSM = 3/4". NPSM

 

Technical Data

Breather Drain HKCS KDE.pdf

Breather Drain DPE Spec.pdf

Breather Drain FlameArrestor Cat 2014XXXX.pdf

Breather Drain CAT 2005XXXX.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit ARRAN Exn LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Chalmit에서 새롭게 선보이는 LED Floodlight 인 ARRAN Series에 대해 함께 살펴보고자 합니다.

 

 

 

Chalmit Lighting

Exn LED Floodlighting

ARRAN

ATEX Category3

Zone2 & Zone22 Applications

 

 

 

The Arran LED floodlight range is low energy with an instant on output and 80,000 maintenance free hours to L70 (70% initial lumens). Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used in locations where flammable vapours, gases or combustible dusts exist.

 

 

Chalmit ARRAN Series - Technical Data & Std. Cat. No.

 

Arran LED Exn Zone2 201408XX.pdf

 

ARRN/06L/LE,ARRN/10L/LE,ARRN/11L/LE,ARRN/15L/LE

ARRN06LLE,ARRN10LLE,ARRN11LLE,ARRN15LLE

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Protecta Exe LED Linear Fluorescent Replacement 기술사양

 

안녕하세요 TIATIP 입니다. Chalmit Lighting에서 새롭게 선보이는 LED Linear Fluorescent, PROTECTA LED 사양에 대해 함께 살펴보도록 하겠습니다.

 

 

Chalmit Lighting

Exe LED Linear

Fluorescent Replacement

PROTECTA III

PROTECTA LED

ATEX Category2

ZONE1 & ZONE21 Applications

 

 

 

 

The Protecta III has now been redesigned to accept LEDs, bringing forward benefits such as the extended life and low maintenance features which are key to the oil and gas industry.


Expected useful life to 70% of the initial lumens is 110,000 hours, but even when this is achieved the geartray which the LEDs are mounted on can be replaced, similar to a traditional lamp change. The LEDs are more powerful in lumens per watt figures than all fluorescent tubes, proving that LED technology is now truly a viable alternative.


One of the main benefits of LEDs is their ability to maintain a steady lumen output across the complete ambient temperature range and at low temperatures they greatly out perform fluorescent lamps.

The complete geartray assembly which includes the LEDs and driver can be retro-fitted into existing Protecta III fluorescent product - bringing the existing enclosure up to date with the very latest technology. The proven track record of the very robust enclosure is not compromised as the complete enclosure
remains unchanged.

 

Chalmit Protecta LED - Technical Data & Std. Cat. No.

 

Protecta LED Exe Zone1 201411XX.pdf

 

PRGE/02L/LE,PRGE/05L/LE,PRGE/02L/LE/EM,PRGE/05L/LE/EM

PRGE02LLE,PRGE05LLE,PRGE02LLEEM,PRGE05LLEEM

SPOL4-100001,SPOL4-100002,SPOL4-100003,SPRO4-00005,SPRO4-00006

SPRO4-00002,NPRO4-00007,NPRO4-00008,NPRO4-0012,SPRO5-0005

SPROT-0021,SPOL4100001,SPOL4100002,SPOL4100003,SPRO400005,

SPRO400006,SPRO400002,NPRO400007,NPRO400008,NPRO40012,SPRO50005,

SPROT0021

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit SCOTIAEx Exde LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 2014년도 11월 Chalmit Lighting의 신제품 SCOTIAEx 사양에 대해 살펴보도록 하겠습니다. 기본적으로 Exde의 방폭형으로 LED방식이며 Floodlighting 타입입니다.

 

 

 

Chalmit Lighting

Floodlighting

Exde LED Floodlight

SCOTIAEx  - SCOD Series

Zone 1 & 21 Applications

ATEX Categrory2

 

 

The ScotiaEx LED Zone 1 floodlight range is low energy with an instant on output and 110,000 maintenance free hours. Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used in locations where flammable vapours, gases or combustible dusts exist.

 

 

 

Chalmit SCOTIAEx - Technical Data & Std. Cat. No.

 

SCOTIAEx Exde Zone1 201411XX.pdf

 

SCOD/07L/LE,SCOD/08L/LE,SCOD/11L/LE,SCOD/12L/LE

SCOD07LLE,SCOD08LLE,SCOD11LLE,SCOD12LLE

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

Chalmit

Protecta Luminaire

Surface Mounted Fluorscent

 

 

 

 

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

CAT REF.

PRGI/118/BI

PRGI/118/BI/EM

PRGI/136/BI

PRGI/136/BI/EM

PRGI/218/BI

PRGI/218/BI/EM

PRGI/236/BI

PRGI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

Protecta Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Industrial Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 일반산업환경에 적용가능한 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Protecta Luminaire

Surface Mounted Fluorscent

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

 

(2) Chalmit Protecta Emergency Luminaire

Surface Mounted Fluorescent

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions.

As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

The Protecta Emergency comes complete with integral three hour Ni-Cd battery backup. The incoming mains supply to the luminaire has the facility for two live supplies: continuous live (Lc) which supplies constant power to the battery and switched live (Ls) which is for external switching, allowing the luminaire to be locally switched off without the emergency battery pack unintentionally operating the lamps.

If external switching is not required Lc and Ls are made common at the mains terminal block.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available.

 

 

 

 

 

(3) Chalmit Protecta Stainless Steel Luminaire

Surface Mounted Fluorescent

The Protecta industrial fluorescent is available with a stainless steel body. Protecta has excellent durability as it is constructed using high grade 316S31 stainless steel and a polycarbonate diffuser. A standard non-emergency and emergency versions are available in both 18W and 36W lamp options.

The product is intended for industrial applications where chemical agents are present which could attack GRP bodied luminaires. The stainless steel enclosure affords a high degree of ingress protection(IP66/67). Its design also utilised the Protecta's key features providing ease of access to lamps and control gear. This ensures that installation and maintenance will be completed quickly and efficiently.

The Emergency version is also available complete with 3 hour Ni-Cad battery back-up.

 

 

 

 

 

(4) Chalmit Acclaim  Luminaire

Recessible Fluorescent

The Acclaim recessible lighting range is suitable for a range of industry standard ceiling types. Available as both emergency and non-emergency versions, the Acclaim can be used with 18W or 36W fluorescent lamps. The Acclaim has an IP ratnig of IP54 and is also certified to for use in fire resistant ceilings up to solas B15 rating.

 

The polycarbonate diffuser is avaiable in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light output and duration in accordance with emergency lighting standards.

ATEX Category 2 (Zone 1) hazardous area versions are available.

 

 

 

 

 

(5) Chalmit Sterling II Luminaire

Surface Mounted Fluorescent

The Sterling II is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a 230/240V 50Hz copper and iron ballast as standard, available in 18W, 36W and 58W fluorescent lamp options. Other supply voltage options are available.

Emergency models have an internal Ni-Cad battery.
Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with high frequency electronic ballast; please refer to the Sterling II HF product page for details.

 

 

 

 

 

(6) Chalmit Sterling II High Frequency Luminaire

Surface Mounted Fluorescent

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.

 

 

 

 

 

(7) Chalmit Sterling II Stainless Steel Luminaire

Surface Mounted Fluorescent

The Sterling II luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a copper & iron switchstart ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Highfrequency ballast (HF), please refer to the appropriate product page for details.

 

 

 

 

 

(8) Chalmit Curie Luminaire

Recessible Fluorescent

The Curie range of fluorescents is available in normal and emergency versions is designed purposely for use industrial applications where  recessible emergency lighting is required. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with the textured side facing downwards. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light output and duration in accordance with emergency lighting standards and comprehensice battery management & automatic self-testing is available as an option.

 

 

 

 

(9) Chalmit Sterling II HF Stainless Steel

Surface Mounted Fluorescent

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas, available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic control gear, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.

 

 

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 방폭위험지역 Zone2에 적용되는 Bulkhead 라인업 소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명가운데 위험지역 Zone2에 적용가능한 Chalmit Bulkhead 라인업에 대해 살펴보고자 합니다.

 

  

 

 

1. Chalmit Lighting Nexxus Bulkhead

Ex n Luminaire

Zone 2 Application
ATEX CATEGORY 3

 

 

 


The Nexxus bulkhead luminaire is suitable for a wide range of discharge lamps, incandescent lamps and also compact fluorescent lamps.

The explosion protection is Ex nR utilising a restricted breathing enclosure. Bulkheads offer a compact and versatile solution in many applications especially those where conditions are exposed and have high levels of dirt and moisture. The enclosure is corrosion resistant aluminium with a heat resistant glass cover, silicone rubber sealing gasket and stainless steel fixings.

The bulkhead is simple to install, easy to maintain and durable. The wide range of light sources and wiring options makes the Nexxus a very versatile luminaire. Suitable for a wide range of ambient temperatures, -45°C to +55°C, dependant on lamp type and wattage.

New reflector system giving 20% increase in photometric performance.

 

 

 

 

 

2. Chalmit Lighting Nexxus II LED Bulkhead

Ex nR tb Luminaire

Zone 2
ATEX CATEGORY 3

 

 

The Nexxus II bulkhead luminaire is suitable for Zone 2 applications incorporating an array of light emitting diodes(LEDs) providing an instant white light that is highly visible.

The explosion protection is Ex nR tb utilising a restricted breathing enclosure. Bulkheads offer a compact and versatile solution in many applications especially those where conditions are exposed and have high levels of dirt and moisture. The enclosure is corrosion resistant aluminium with a heat resistant glass cover, silicone rubber sealing gasket and stainless steel fixings.

The bulkhead is a very low power consumption reulting in ultra long lifespan where relamping is not required. The Nexxus a very versatile luminaire that is easy to install with a high corrosion resistance, suitable for a wide range of ambient temperatures, -45°C to +55°C.

New reflector system giving 20% increase in photometric performance.

 

 

 

  

  

Technical Data (Datasheet)

Nexxus Bulkhead Hazardous.pdf

Nexxus II LED Bulkhead Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 방폭위험지역 Zone1에 적용되는 Bulkhead 라인업 소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명가운데 위험지역 Zone1에 적용가능한 Bulkhead 라인업에 대해 살펴보고자 합니다.

 

 

 

 

1. Chalmit Lighting NexLED LED Bulkhead

Ex e Luminaire

Zone 1
ATEX CATEGORY 2

 


The NexLED bulkhead luminaire utilises high output 1 Watt light emitting diodes (LED's) that provide a white, instant light that is highly visible.

Suitable for Zone 1, the protection being flameproof increased safety. Bulkheads offer a compact and versatile solution in many applications especially those where conditions are exposed and have high levels of dust and moisture. The enclosure is corrosion resistant marine grade aluminium with a toughened glass cover, silicone rubber sealing gasket and stainless steel fixings.

The product can be fitted with either 2 or 8 LED's and offers a very low power consumption product well suited to UPS systems. The bulkhead is simple to install, easy to maintain and durable.

The LED's are more efficient than incandescent and most tungsten halogen lights and operate for over 60000 hours eliminating relamping in many applications. This new lamp technology emits no heat or ultra violet light and is mercury free.

Suitable for a wide range of ambient temperatures from -45ºC to +55ºC with light output not affected by low temperatures.

 

 

2. Chalmit Lighting NexLED Emergency LED Bulkhead
Ex e ib im Luminaire

Zone 1
ATEX CATEGORY 2

 

The NexLED bulkhead luminaire utilises high output 1 Watt light emitting diodes (LED's) that provide a white, instant light that is highly visible.

 

 

Bulkheads offer a compact and versatile solution for many applications, escpecially in exposed conditions with high levels of dust and moisture. The enclosure is corrosion resistant marine grade aluminium with a toughened glass cover, silicone rubber sealing gasket and stainless steel fixings. The product can be fitted with either two or eight low power LED's making the NexLED an efficient luminaire for both mains and emergency modeo operating from the backup battery. The use of LED technology means that light output in emergency mode is identical to mains operation, lamps switch off for one second when the mains fail then restart to indicate battery operation.

 

The bulkhead is simple to install, easy to maintain and durable. The LED's are more efficient than incandescent and most tungsten halogen lights and operate for up to 80000 hours eliminating relamping in many applicaitons. This new lamp technology emits no heat forward, no ultra violet light, is mercury free and is not susceptible to vibration. Suitable for a wide range of ambient temperatures from -45℃ to +55℃ with light output unaffected by low temperatures. Where emergency lighting is required in ambient temperatures below -5℃ the NexLED is avaible with a heated battery compartment which maintains the batteries at the required temperature to sustain emergency duration.

 

 

3. Chalmit Lighting Nevis Bulkhead
Ex d e Luminaire

Zone 1
ATEX CATEGORY 2

 

 

The Nevis bulkhead is designed for applications where a low profile robust luminaire is required. It is suitable for mounting on handrails and walls as well as ceilings and in restricted dirty places.

The ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings. It has an IP66/67 rating making it ideally suited to use in hazardous area environments

The luminaire is suitable for high pressure discharge lamps up to 70W HPS and 125W mercury vapour and also compact fluorescent lamps up to 26W, 200W GLS and 55W QL induction lamps. These give an efficient all around light distribution.

The large side mounted increased safety terminal chamber eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

 

 

4. Chalmit Lighting Nevis LED Bulkhead

Ex d e Luminaire

Zone 1
ATEX CATEGORY 2

 

 

 


The Nevis LED bulkhead is an ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications.  The ultra bright LEDs will deliver an instant white light which has a longer life with light output & efficiency equivalent to a 70W HPS, making this a very cost effective luminaire.

The Nevis LED has these key benefits:
 
·          Long Operational Lifespan = 60,000 hours
·          Reduced Power Consumption = Cost effective
·          Operational at Low Temperatures -55°C

 

The Nevis has a side mounted increased safety terminal chamber, this eliminates the need for flameproof glands and allows for flush mounting with easy cable access. Designed for low profile applications, the bulkhead can be mounted on walls, handrails and ceilings - ideal for walkways or restricted height areas making the Nevis suitable for extreme environmental conditions.

 

 

 

 

 

Technical Data (Datasheet)

Nexled Bulkhead Hazardous.pdf

Nexled Emergency Hazardous.pdf

Nevis Hazardous.pdf

Nevis LED Hazardous.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Sterling II Emergency Stainless Steel Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Sterling II Emergency Stainless Steel Luminaire  제품에 대해 살펴보도록 하겠습니다.   

 

 

 

Chalmit Lighting

Fluorescent

Sterling II Emergency Stainless Steel Luminaire  

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

 

 

The Sterling II stainless emergency is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage. The emergency version provides safety critical lighitng for three hours in the event of a mains power failure.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear.     

 

 

 

 

  

CAT REF.

SS2N/136/BI

SS2N/136/BI/EM

SS2N/158/BI

SS2N/158/BI/EM

SS2N/218/BI

SS2N/218/BI/EM

SS2N/236/BI

SS2N/236/BI/EM

SS2N/258/BI

SS2N/258/BI/EM

 

Technical Data(Datasheet)

Sterling IIE SS Emergency Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

  

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Sterling II Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Sterling II Luminaire 제품에 대해 살펴보도록 하겠습니다.

  

 

Chalmit Lighting

Fluorescent

Sterling II Luminaire  

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

The sterling II is a quality and cost effective luminaire designed to provide instant glare free white light for Zone 2 hazardous areas.

The GRP body and polycarbonate diffuser is secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance. The protection is Ex n with IP65 sealing.

The sterling II is designed as a single product for both Gas & Dust atmospheres and is certified under the ATEX 94-9-EC directive for Categories 3 G and 3 D. The range is also IECEx compliant.

The Sterling is suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

   

 

 

 

CAT REF.

ST2N/136/BI

ST2N/136/BI/EM

ST2N/158/BI

ST2N/158/BI/EM

ST2N/218/BI

ST2N/218/BI/EM

ST2N/236/BI

ST2N/236/BI/EM

ST2N/258/BI

ST2N/258/BI/EM

NPRO4-0008

NPRO4-0012

NPRO4-0022

S3004-100001

S3004-100003

S3004-100004

SPOL4-100004

SPOL4-100005

SPOL4-100006

 

Technical Data(Datasheet)

Sterling II Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Acclaim Recessible Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Acclaim Recessible Luminaire  제품에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit Lighting

Fluorescent

Acclaim Recessible Luminaire  

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

 

 

 

 

 

The Acclaim range fluorescent luminaires is certified for use in Zone 1 and Zone 21 hazardous areas. It is designed for use in offshore accommodation areas and control rooms where it provides recessible emergency and escape lighting.

Manufactured from zinc coated sheet steel the luminaire is suitable for installation in fire resistant ceilings up to solas B15 rating. The polycarbonate diffuser is available in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed into a variety of ceiling types..

 

 

 


The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light out and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration.

 

IECEx Compliant

CSA Approved 

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

Please note: The Acclaim III is supplied with a high frequency self-test ballast. If using the Acclaim for sleeping quarters, please select the non-self test option (Suffix to Cat No. /NST).

   

 

 

CAT REF.

ACLE/218/BI

ACLE/218/BI/EM

ACLE/236/BI

ACLE/236/BI/EM

 

Technical Data(Datasheet)

Acclaim.pdf

  

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Protecta III Luminaire 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Protecta III Luminaire 제품에 대해 살펴보도록 하겠습니다.

 

Chalmit Lighting

Fluorescent

Protecta III Luminaire

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

 

 

 

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas The rugged Protecta combines high quality and low maintance. It is constructed of a glass reinforced polyester (GRP) body and a polycarbonate diffuser to resist highly saline and other harsh, corrosive environments.

Major features of the luminaire are the strength of the enclosure and mounting points together wih the very high degree of ingress protection afforded by the simple reliable construction.
 
All the control gear is mounted on a gear tray. This ease of access to lamps and control gear ensures that installation and maintenance will be completed quickly and efficiently.

 

GOST R, CSA & CEPEL Approved

ATEX and IECEx Compliant

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

 

 

 

CAT REF.

PRGE/218/BI

PRGE/218/BI/EM

PRGE/218/MO/EM

PRGE/218/MO

PRGE/236/BI

PRGE/236/BI/EM

PRGE/236/MO/EM

PRGE/236/MO
NPRO4-0007

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

SPROT-0033

 

 

Technical Data(Datasheet)

ProtectaExe.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 방폭형 Pyramid Low Bay 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명용 Chalmit Pyramid Low Bay 에 대해 살펴보도록 하겠습니다.

 

 

 

CHALMIT LIGHTING

샬밋라이팅

Pyramid Low Bay

Explosionproof 방폭조명

Zone 2 Ex n Luminair
ATEX CATEGORY 3

 

 

 

The Pyramid is designed for low and medium bay applications in hazardous areas where a high level of illumination and low glare is required. The unique photometric design of the refractor gives excellent light distribution.

The protection for ignitable gas applications is Ex nR and 'dust excluding', IP6X for ignitable dust atmospheres.
The zinc coated steel body with polyester painting and the polycarbonate refractor make the Pyramid suitable for use in moderately aggressive locations.
 
The luminaire can be surface mounted suspended or recessed. It is particularly suitable for mounting under canopies, in warehouses and in factories. The Pyramid is also available with a dust cover configuration making it ideally suited for use in areas where combustible dusts (& gas) are present.

 

Key Features :

Low glare

Excellent light distribution and uniformity at up to 10m mounting heights

Suspended geartray for ease of maintenance

 

 

 

CAT REF.

PYMN/150/HS

PYMN/150/HS/RE

PYMN/250/MS

PYMN/250/MS/RE

PYMN/400/MS

 

 

Technical Data (Datasheet)

Pyramid.pdf

  

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 방폭형 Control Gear/Control Box/Gearbox 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명용 Chalmit Control Gear/Control Box/Gearbox 에 대해 살펴보도록 하겠습니다.

 

 

CHALMIT LIGHTING

Control Gear

Universal Box Remote Gearbox

Explosionproof

Zone 1Ex e Control Boxes
ATEX CATEGORY 2

 

 

 

The Universal Box is designed for use in both Zone 1 and Zone 2 hazardous areas. The universal gearbox replaces the 720 Ex e remote gearbox series used to supply floodlights without integral control gear. Where an ignitor is required it must be with the luminaire. The correction capacitors are in the control box.

The range also replaces the 700/702 Ex d control box but does not replace the 700/702 box with ignitor. The main range is for 150W to 600W hps lamps. These models also replace the 500/501 series Ex N gearbox but do not replace those gear boxes with internal ignitors. The universal transformer also replaces the 700 Ex d series transformer box the usual application of which is supplying 230V range control gear from 120V supplies.

The transformer is an auto design not a double wound design. It is for lighting applications not for electrical safety. The rating is 500 and 1000VA. Both the control gear and transformers have a built-in thermal cut-out which resets after the mains supply is switched off for a short period. This protection is needed for lighting control gear operating during possible lamp faults. This range will often be used as replacements for obsolete items using a variety of lamps. The IOM sent with each product and available on request contains essential information for correct application.

 

ATEX Certified

GOST R Approved

 

 

 

 

CAT REF.

UNIE/1000/TF

UNIE/150/MS

UNIE/250/MS

UNIE/400/MS

UNIE/500/TF

UNIE/600/HS

UNIE/1000/TF

 

 

Technical Data (Datasheet)

UniversalBox.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Eclipse Junior Well-Glass 기술사양

 

안녕하세요 자동화닷컴입니다. 오늘 이 시간에는 샬밋라이팅의 방폭조명가운데 방폭위험지역 Zone2에서 적용되는 Chalmit Eclipse Junior Well-Glass 사양에 대해 살펴보겠습니다.

 

 

Chalmit  Lighting

Eclipse Junior Well-Glass
Ex n Luminaire
ATEX CATEGORY 3

 

 

 

The Eclipse junior is a Zone 2 well-glass luminaire suitable for high pressure discharge lamps up to 70W and GLS lamps up to 150W.

It has a lightweight corrosion resistant aluminium body, heat resistant glass cover with stainless steel fasteners. The Eclipse Junior is tested to IP66 and is suitable for use in harsh and hazardous environments.

 

 

 

 

 

The protection method is Ex nAR incorporating a restricted breathing lamp chamber and an unrestricted control gear and terminal housing. This removes the need for special cable or glands. The lamp-glass has a screwed thread for quick access. The main enclosure containing the control gear hinges on the mounting part but is not fastened to it. This allows ready access to the terminals and the easy removal of the control gear and lamp enclosure if maintenance is needed.

 

 

  

 

 There is a range of wall, surface and stanchion mountings integrated into the designs, please refer to the datasheet for further details. This small well-glass offers a compact lighting solution for use where all round lighting is needed in positions having limited space and access.

 

GOST R Approved

CEPEL Approved

Ambient temperature range: -30ºC to +55ºC

 

 

 

 

CAT REF.

ECJN/050/HS

ECJN/070/MS

ECJN/080/MV

ECJN/125/MV

ECJN/113/CF

ECJN/118/CF

ECJN/126/CF

ECJN/150/GL

E0850-0048

SECL0-0001

SECL0-0002

 

 

Technical Data(Datasheet)

EclipseJr.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

  

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 238 Well-Glass 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명가운데 방폭위험지역 Zone1에서 사용되는 Chalmit 238 Well-Glass 사양에 대해 살펴보도록 하겠습니다.

 

 

 

CHALMIT LIGHTING

샬밋

238 Well-Glass
Explosionproof

Ex d e Luminaire
ATEX CATEGORY 2

 

 

 


The 238 well-glass luminaire is ideal for use where a compact and powerful source of area lighting is needed. The hazardous area range accommodates high pressure discharge lamps up to 250W and incandescent GLS lamps up to 300W.

 

 

 

 
External reflectors are available to provide light control for efficient low and medium height operation.

The luminaire is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings. It has an IP66/67 rating.

 

 

 


The luminaire features a large side mounted increased safety terminal chamber eliminating the need for flame-proof cable glands and allowing flush mounting. The 238 is suitable for a wide range of high and low temperature applications.

 

ATEX Certified

GOST R Approved

CSA Approved

IECEx Compliant

 

 

 

 

CAT REF.

238D/070/MS

238D/070/HS/T5

238D/080/MV

238D/085/QL

238D/085/QL/120

238D/100/HS

238D/125/MV

238D/150/GL

238D/150/MS

238D/150/MS/T3

238D/125/MV/T3

238D/160/MB

238D/200/GL

238D/250/MS

238D/250/MV

238D/300/GL

S2380-0001

S2381-0012

S2610-0001

 

Technical Data(Datasheet)

238.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Nexxus Bulkhead 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋의 방폭조명가운데 방폭위험지역 Zone2에 적용되는 Chalmit Nexxus Bulkhead 사양에 대해 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

샬밋

Nexxus Bulkhead
Explosionproof

Ex n Luminaire
ATEX CATEGORY 3


The Nexxus Bulkhead luminaire is suitable for a wide range of discharge lamps, incandescent lamps and also compact fluorescent lamps.

The explosion protection is Ex nR utilising a restricted breathing enclosure. Bulkheads offer a compact and versatile solution in many applications especially those where conditions are exposed and have high levels of dirt and moisture. The enclosure is corrosion resistant aluminium with a heat resistant glass cover, silicone rubber sealing gasket and stainless steel fixings.

The bulkhead is simple to install, easy to maintain and durable. The wide range of light sources and wiring options makes the Nexxus a very versatile luminaire. Suitable for a wide range of ambient temperatures, -45°C to +55°C, dependant on lamp type and wattage.

New reflector system giving 20% increase in photometric performance.

 

ATEX Certified

GOST R Approved

CSA Compliant

 

 

 

 

Technical Data (Datasheet)

Nexxus_Zone2.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Nevis LED Bulkhead 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 방폭위험지역 Zone1에 적용되는 샬밋 Bulkhead가운데 Chalmit Nevis LED Bulkhead에 대해 알아보도록 하겠습니다.

 

 

Chalmit Lighting

샬밋

Nevis LED Bulkhead
Explosionproof

Ex d e Luminaire
ATEX CATEGORY 2

The Nevis LED bulkhead is an ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications.  The ultra bright LEDs will deliver an instant white light which has a longer life with light output & efficiency equivalent to a 70W HPS, making this a very cost effective luminaire.

 

The Nevis LED has these key benefits:
·          Long Operational Lifespan = 60,000 hours
·          Reduced Power Consumption = Cost effective
·          Operational at Low Temperatures -55°C

 

 

 

 

The Nevis has a side mounted increased safety terminal chamber, this eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

 

Designed for low profile applications, the bulkhead can be mounted on walls, handrails and ceilings - ideal for walkways or restricted height areas making the Nevis suitable for extreme environmental conditions.

 

 

 

 

Technical Data (Datasheet)

NevisLED.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Nevis Bulkhead 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋의 방폭조명가운데 위험지역 Zone1에 사용되는 Chalmit  Nevis Bulkhead 사양에 대해 살펴보도록 하겠습니다.

CHALMIT LIGHTING

Bulkhead

Nevis Bulkhead

Ex d e Luminaire

ATEX CATEGORY 2

 

 

 

The Nevis bulkhead is designed for applications where a low profile robust luminaire is required. It is suitable for mounting on handrails and walls as well as ceilings and in restricted dirty places.

The ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings. It has an IP66/67 rating making it ideally suited to use in hazardous area environments

The luminaire is suitable for high pressure discharge lamps up to 70W HPS and 125W mercury vapour and also compact fluorescent lamps up to 26W, 200W GLS and 55W QL induction lamps. These give an efficient all around light distribution.

The large side mounted increased safety terminal chamber eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

 

ATEX Certified

GOST R Approved

Brackets available for handrail mounting

 

 

 

 

Technical Data (Datasheet)

Nevis.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Micronex and Maxinex Floodlights 술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 Chalmit Lighting의 방폭형 Floodlight 시리즈가운데 Zone 2에 해당하는 Micronex and Maxinex Floodlights 기술사양을 살펴보겠습니다. 

 

 

 

 

Chalmit Lighting

샬밋

Micronex and Maxinex Floodlights
Ex n Luminaire
ATEX CATEGORY 3
The maxinex and micronex form a range of zone 2 floodlights providing excellent photometric performance. The smaller micronex is for 70W double ended high pressure sodium or metal halide lamps and the larger maxinex is for 150W to 400W tubular high pressure sodium or metal halide lamps. The hazardous area protection is Ex nR utilising a restricted breathing enclosure.

 

 

 

Chalmit Lighting

샬밋

Micronex and Maxinex Floodlights



The asymmetric distribution enables areas to be lit more efficiently with less glare or light pollution. This is because the beam is thrown a long distance whilst avoiding excess light levels under the mounting point and having a precise cut off angle.

 

 

Chalmit Lighting

샬밋

Micronex and Maxinex Floodlights

Available with a choice of either a narrow or wide beam reflector, the micronex and maxinex offer the opportunity for very effective and efficient lighting schemes to be designed. The enclosure is a robust high pressure die-cast aluminium body with a toughened glass cover in a hinged frame with stainless steel fasteners. The compact design ensures reduced weight and has low windage which helps lower installation costs as it allows more economical support structures. Suitable for a wide range of ambient temperatures, -40°C to +55°C, dependant on lamp type and wattage.

  • ATEX Certified
  • GOST & CSA Approved 
  • CEPEL Approved (Maxinex only)

    

 

 

Technical Data (Datasheet)

Maxinex_Micronex_Zone2.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

  

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke ATEX INLINE Connector, ControlEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke ATEX INLINE Connector, ControlEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다. 

 

 

 

HAWKE

ControlEx Termination Procedure

 

IMPORTANT NOTE


1. Hawke International does not recommend the use of their ControlEx Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable / semi-portable applications.


2. Barrier type glands must be fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components. Where connectors are terminated to topside umbilical cables, or portable connectors, a barrier type cable gland should always be used.


3. Hawke Ex Connector products are designed to be used in multi-voltage applications in circuits up to 660V AC/DC. It is
possible that on certain installations, there may be a mix of applications utilising different voltages on the Connector
products. In these instances, the installer / circuit designer must ensure that the plugs and sockets, or their associated
cabling, is clearly marked with the correct circuit voltage and current rating to ensure that the equipment being supplied is
matched correctly with the supply voltage. The variable insert positions which are a feature of the Connectors may also be
used to provide additional means of safety in these applications.

 

ControlEx Hook Up Procedure

 

1. Remove the CP/CR connector assembly, electrical insert and cable gland
(sold separately) from their packaging.


2. Terminate the cable into the cable gland in accordance with the manufacturer’s Instructions. Ensure a minimum tail length of 130mm.

 


 

3. Unscrew the rear engaging nut from the connector shell, removing the rear shell and keyway tube.

 

  

4. Slide the rear engaging nut over the rear shell as shown and screw the rear shell onto the entry thread of the cable gland ensuring there is a sealing washer between the gland and rear shell. A small amount of Loctite 638
or equivalent can be added to the cable gland thread at this stage to further help prevent loosening of the cable gland in portable applications.

 


Where a thread adaptor is being used, ensure a suitable IP seal is fitted between the cable gland and thread adaptor, and thread adaptor & running coupler. If the thread adaptor has an integral O-Ring, please ensure this makes full contact with the cable gland and running coupler to maintain the IP
protection. Check to ensure the captive O-Ring seal on the rear shell is in place and is undamaged

 

If the tab washer is being used, ensure this is fitted in the orientation shown. Use the flats on the rear shell to further tighten.

 

 

 

 

5. Cut the conductors to the length shown in the table below.

 

 

Note: Maximum tolerance is to allow for twisted cables and placement of cores within connector shell. If core spacing relative to insert numbering does not require excess core, use minimum cut lengths.

 

6. Strip back the insulation from the conductor’s as shown

 

 

 

 

7. Proceed to step 8 if internal earthing is not required.

 


NOTE: If internal earthing is not being used, the internal earth crimp must not be fitted and the grub screw in the rear shell must be removed

 


If earthing is required slide the internal crimp (supplied with CP/CR inserts) over the earth conductor and crimp using suitable tool. The stud can then be fitted into the rear shell and fastened using the grub screw shown. The stud on the earth crimp should not protrude from the outer diameter of the rear shell. Adjust if necessary.

 

 

8. a) Solder inserts – black (1.5 – 35mm²). Tin the conductors and fill the solder cups on the back of the inserts with solder as required Solder conductors in place and remove any solder spikes/excess from the solder cup. It is advised that heat shrink should be fitted over the connection at this point

b) Solder inserts – white (1.5 – 4mm2). As above, however, inserts should be soldered outside of the insert body and not fully assembled. If the contacts are to be solder terminated to the conductors, this must be done prior to insertion
through the rear contact retainer. It is advised that heat shrink should be fitted over the connection at this point Then follow (c ii & iii).


c) Crimp Inserts (1.5 – 4mm²) – white.

 

i) Crimp the conductors into the contacts using Weidmuller CTX CM 1.6/2.5 crimp tool HCT1, or Astro Crimp Tool HCT2. For 0.75 to 1.5mm² conductors use the 1.5 die. For 1.6 to 4mm² use the 2.5 die. It is advised that heat shrink should be fitted over the connection at this point


ii) Feed the contacts through the required numbered hole on the rear contact retainer and slide the insertion tool over the contacts up to the groove (one end for pin and one for socket). Clip the groove on the contact into position in the rear contact retainer with the tool.

 

 

 

iii) Align the main pip on the rear contact retainer with the key on the front contact retainer and slide over the contacts into position. Ensure the 2 smaller pips are also in line

 

 

d) Crimp Inserts (6 – 35mm²) – black. Undo the grub screws on the crimp barrels and slide them off the back of the contacts. Slide the conductors into the back of the barrel. Orientate the barrel so that the grub screws are pointing
outwards and crimp with a suitable crimp tool.


Push the barrels back onto the rear of the contacts and tighten grub screw into the groove on the contact. Back off grub screw half a turn on crimp barrels of 10mm² or larger to allow them to slide up and down the contact slightly

 

 

 

 

 

9. Clip spacer tube over conductors. Bend conductors slightly so that there is no or minimal gap between the insert/spacer tube and rear shell. On crimp insert of 10mm² or larger, slide the crimp barrels up and down the contacts to achieve this and then lock them in place by tightening the grub screw’s on the crimp barrels.

The insert has 3 pips, shown below, which should be located as shown. The main centre keyway should align with the centre of the spacer tube

 

 

 


NOTE: If being used on offshore topside applications where extreme temperature fluctuations or extreme levels of humidity may be present, it is advisable to use Dow Corning 4 Electrical Insulating Compound within the spacer tube to help prevent any possible humidity build-up. See point 15 below

 

 

10. Looking from the front of the connector shell, align the key on the insert to the required key inside the connector and slide the whole assembly into the shell. The EX16 connector has 3 keyways, and all other connectors have 5 possible keyways

 

 

 

 

11. Fully screw the rear engaging nut onto the thread on the connector shell, do not rotate the connector shell during this process. Tighten grub screw in rear engaging nut. There should be a gap visible of no more than 1mm between running coupler and shell

 

 

 

 

12. If the tab washer is being used, fix the tab using the button head screw to the rear engaging nut. Bend the tabs over the
flats of the cable gland.


13. If being used, terminate the external earth to the ring terminal crimp provided with the insert. Remove the button head
screw and spring washer from the rear engaging nut. Attach the crimp to the rear engaging nut as shown above


14. The connector is now ready for use. Please refer to the ‘Hook Up’ procedure.

15. If additional protection is required due to extreme atmospheric conditions, before inserting the assembled connector insert and spacer tube into the connector shell (step 10 above) Dow Corning 4 Electrical Insulating Compound can be used to fill the spacer tube. It is recommended that the running coupler be filled, along with the inner face of the insert to ensure no humidity can affect the contacts

 

 

ControlEx MK IV Connector Hook Up Procedure

 

Before commencing hook up, a visual inspection should be carried out on the cable / gland / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly components have loosened during transportation / cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the cable gland / connector assembly.

 

Areas to be checked:

 

 

 

 

NB: These areas should also be checked as part of a routine maintenance programme.

 

1) Turn off the power to the connectors.
2) Ensure the connectors are both set to the same keying position number and are of the same insert type.

 

 

 

 

3) Engage the CP connector with the BR / CR connector and align the key on the CP connector to the keyway on the BR / CR connector.

 

 

engaging nut clockwise onto the BR/CR shell. If the engaging nut will not screw on more than half a
turn, then the connectors are set to different keying positions.

 

 

5) Tighten the grub screw on the engaging nut.

 

6) If the optional locking pin is being used, this should be fitted at this stage, once the connectors are fully mated.

 

 

7) To disconnect, turn off the power, slacken the tightened grub screw, turn the engaging nut anticlockwise and remove the connector. If power is to be put through the connectors whilst de-mated, then a flameproof cap (available separately) must be fitted.

 

 

 

 

Technical Data

ControlEx MKIV Spec.pdf

ControlEx Spec.pdf

ControlEx MKIV Hookup Procedure 20131105.pdf

ControlEx MKIV Hookup Procedure 20131218.pdf

ControlEx Hook up procedure 20091202.pdf

ControlEx Inline connector termination 20091202.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Exd Connector, MK IV ControlEx 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 방폭커넥터 제품군 가운데, Contrl 관련 애플리케이션에 적합한 Hawke MK IV ControlEx 시리즈를 살펴보도록 하겠습니다.

 

 

 

HAWKE

Range For Harsh and Hazardous Locations

Hazardous Area Connector

MK IV ControlEx

IECEx/ATEX Certificate 

 

Note: Inline connector receptacle (CR) also available

 

 

Overview

 

The 4th generation ControlEx has been designed as a result of over 20 years of plug-and-socket experience. Manufactured in Stainless steel, the connectors provide unrivalled durability in hostile environments.

 

Both ATEX/IECEX, GOST & NEC certified, the connectors are Exd rated with an Ingress Protection rating of IP66 / IP67 and have industry leading DTS01 deluge protection.

 

 

 

 

The wide range of insert variables can handle up to 60 cores.

 

Other improvements include an all-new padlock facility, allowing the connectors to be securely locked to prevent accidental un-plugging of equipment and improved secure cap fixings.

 

The 4th generation ControlEx maintains many of the original features which made its predecessor extremely popular, including a variable keying system to prevent accidental cross-mating, modular gold-plated field crimpable inserts for ease of wiring and a fully inspectable flameproof barrier providing direct inspection of the flameproof seal.

 

 

 

 

 

Tamb: -40°C to +60°C.

II2 GD Exd IIC Gb, Extb IIIC T95Db.

IP66, 67

DTS01 deluge protected.

Certificate No's Baseefa12ATEX0014X & IECEx BAS 12.0006X.

 

ControlEx Features

 

(1) Easy Fieldwireable
Pin and socket inserts are numbered front and back to assist wiring and avoid
termination errors. Crimp and solder inserts available.

 

 

(2) Internal Keyway Spacer

Eases accessibility for termination as tube fitted after termination complete,
along with allowing easy installation into the required keyed position (See (4))

 

 

(3) Locking Pin
Optional locking pin provides the facility for mated connectors to be permanently
locked, via the use of a padlock, ensuring they cannot be separated under load. (Padlock not supplied)

 

 

 

 

(4) Keying Position
The unique visual 5 position insert keying system (3 on Ex16) along with the integral machined keyways prevent contact damage and ensures safe use by eliminating the possibility of misconnection of adjacent circuits.

 

 

 

(5) Running Coupler
Allows the connector to be installed onto a pre-assembled cable gland. Connector is rear loading and includes locking engaging nut.

  

 

 

(6) Acme Thread at Mating Interface
Unique ACME thread offers a smooth and quick fully mating action.

 

 

 

(7) Fully Inspectable Flameproof Barrier
Provides direct inspection of the flameproof seal and offers users the peace of mind that the connector is safe for installation.

 

 

 

(8) Anti-Rotation Device
Connector plugs and receptacles come complete with anti-rotation ring, which
when fitted between the connector and gland, helps to eliminate the possibility of the gland loosening, locking this in position.

 

 

 

 

 

Technical Data

 

ControlEx MKIV Spec.pdf

ControlEx MKIV Hookup Procedure 01.pdf

ControlEx MKIV Hookup Procedure 02.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Exd Connector, InstrumEx 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 방폭커넥터 제품군 가운데, Instrument 연결 애플리케이션에 적합한 Hawke InstrumEx 시리즈를 살펴보도록 하겠습니다.

 

 

HAWKE

Range For Harsh and Hazardous Locations

Hazardous Area Connector

InstrumEx

IECEx/ATEX Certificate 

 

Overview

This revolutionary design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. The InstrumEx connector is available with two insert options:

 

 

 

The 4-way option will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC & 2.5A (DC1) 60V DC.

 

The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC & 0.5A (DC1)60V DC. InstrumEx connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.

 

 

 

 

Tamb: -40°C to +60°C.

II2 GD Exd IIC ExtD T85.

IP66, 67

DTS01 deluge protected.

 

 

 

Technical Data

InstrumEx Spec.pdf

InstrumEx BRO 200808XX.pdf

InstrumEx Manual 20140403.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

  

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Live Demateable Connector, InstrumEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Live Demateable Connector, InstrumEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다.

 

 

 

 

HAWKE

InstrumEx Termination Procedure

 

IMPORTANT NOTE

1. Hawke International does not recommend the use of their InstrumEx Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable/semi-portable applications.


 

2. Hawke International recommends that barrier type glands are fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components.


 

3. Hawke Ex Connector products are designed to be used in multi-voltage applications in circuits: 4 way up to 250V AC, 4 way up to 60V DC and 8 way up to 60V AC/DC. It is possible that on certain installations, there may be a mix of applications utilising different voltages on the Connector products. In these instances, the installer / circuit designer must ensure that the plugs and sockets, or their associated cabling, is clearly marked with the correct circuit voltage and current rating to ensure that the equipment being supplied is matched correctly with the supply voltage. The variable insert positions which are a feature of the Connectors may also be used to provide additional means of safety in these applications.

 

 

 

 

CP / CR PROCEDURE


1) Unscrew the middle nut and back nut from the connector body and remove the armour clamping ring, spigot and insert. If you have purchased a connector with the optional backnut clamp and / or flange, slide these down the cable now (clamp first).

 

 

2) Remove the two seal assembly’s from the box and choose the required seal to suit the diameter of the cable outer jacket.

 

 

 

3) Insert the seal into the back nut, ensuring that the flange on the seal goes past the thread as shown.

 

 

 

 

 

4) Screw the back nut onto the middle nut. Do not compress the seal at this stage.

 

 

 

5) Slide the middle nut, backnut and armour clamping ring over the cable ensuring that the clamping ring is pointing in the required direction for the size of armour / braid. The alternative ring is supplied in the box.

 

                          

 

 

 

6) Strip back the outer jacket and armour (if present) as shown below.

 

 

 

7) Strip back the inner sheath level with the armour to expose the insulated conductors as shown below. If unarmoured, strip back to the outer jacket.

 

 

 

 

 

ARMOURED / BRAIDED CABLE


8) Push the inner sheath of the cable through the spigot.
Spread the armour / braid over the spigot until the end of the armour / braid is up against the shoulder of the spigot. Position the armour clamping ring onto the armour/braid.

 

 

 

9) Place the connector body over the spigot engaging the octagonal portion of the spigot. Move the middle nut up to meet the connector body. Place a 27 A/F spanner on the flats of the connector body and hold it in position.
Hand tighten the middle nut to the connector body, then turn a further ½ to ¾ turn with a 27 A/F spanner.

 

 

 

10) Unscrew the middle nut and visually inspect the armour has been  successfully clamped between the armour spigot and the clamping ring.

 

 

 

 

UNARMOURED CABLE
(If earth is to be terminated to connector shell. Otherwise proceed to step 15)


11) Strip back the earth conductor as shown below. If the earth is being carried through a contact as well as being connected to the shell, see fig b.

 

 

 

12) Crimp the flat blade earth crimp onto the earth conductor as shown below. Ensure the blade of the crimp is outermost as shown and that the crimp is pushed all the way up to the insulation of the earth conductor.

 

 

13) Push the conductors through the spigot and place the blade of the crimp on the taper of the spigot.

 

 

 

 

 

 


the blade of the crimp and lock into position by following steps 9 and 10 of the armoured / braided cable procedure.

 

15) Strip back the conductors as shown below.

 

 

 

 

 16) Remove the contacts from the contact retainers. Crimp the contacts onto the conductors using the Hawke crimp tool only (part number 901849). Ensure that the insulation of the conductor is up against the shoulder of the contact. When terminating 0.5mm² or 1.5mm² wire, ensure the conductor is pushed all the way into the smaller hole of the contact and that the contact is square in the crimp tool.


CAUTION: EXCESSIVE FORCE MAY BEND THE CONTACTS


Alternatively, conductors may be soldered into the contacts. Ensure that the cable installation is the same on the mating half. Hawke recommends that wiring details are placed on the cable outer jacket near to the connector.

 

 

17) Splay out the contacts and fit them through the slots in the rear contact retainer, ensuring they line up with the relevant numbered hole on the front contact retainer (ensure keys are aligned - see step 18). Unused contacts
should be omitted if not required to ease assembly.

 

 

 

18) Slide the front contact retainer over the contacts and snap into place with the rear contact retainer. Push the clips of the rear contact retainer firmly down to ensure they are not protruding (will only fit in the correct orientation).

 

 

19) Slide the insert into the connector body, aligning the half round key on the rear contact retainer with the required half round keyway in the connector body. (The colour coded or numbered keying position is shown on the front of the connector body. No colour coding or numbering for default 12 o’clock position – see picture inset). It should be noted that colour coded and numbered connector bodies are mutually interchangeable. Push the octagonal portion of the spigot into the connector body.

 

 

20) Slide the middle nut over the clamp / spigot and hand tighten onto the connector body, then further tighten ½ to ¾ of a turn with a 27 A/F spanner while holding the front shell with a 27 A/F spanner

 

 

 

 

 

21) Hand tighten the backnut onto the middle nut. Further tighten 1 to 1 ½ turns with a 27 A/F spanner while holding the middle nut with a spanner.

 

 

 

22) If the optional mounting flange is required, slide the flange over the backnut and position on the middle nut. Align the grub screw with one of the flats and tighten. If the flange is being used on a CR connector, it may also be
placed on the connector body as shown over.

 

 

23) If the optional cable clamp has been purchased, tighten the screws on the clamping bars equally until the clamping bars touch the cable. Tighten each screw a further 2-4 turns or until adequately clamped.


DO NOT OVERTIGHTEN AS THIS COULD DAMAGE THE CABLE.


If the cable clamp is being used with unarmoured cable, the connector should be earthed via the crimp with a 4mm² conductor.

 

 

 


24) Screw the cap back onto the connector. Stick the corresponding round colour coded / numbered sticker onto label in the circular space provided.
(white = 12 o’clock / Position 1)

 

 

25) The connector is now ready for hook up. Please refer to the hook up procedure.

 

 

BR PROCEDURE
1) The BR connector is supplied ready terminated with tails.
Simply fit into suitable junction box / equipment as required. To maintain the IP rating of the equipment, a sealing washer should be used (available separately) as shown below.

 

 

2) Terminate the conductors and earth wire inside the junction box / equipment.


3) The connector may also be earthed externally via the crimp with a 4mm² conductor if required.

 

 

4) The connector is now ready for hook up. Please refer to the hook up procedure.

 

HOOK UP PROCEDURE

 

WARNING:
Only the socket insert is allowed to remain energised while de-mated. If being used with bi-directional signals, isolate elswhere before connecting / disconnecting.

 

Before commencing hook up, a visual inspection should be carried out on the cable / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly components have
loosened during transportation / cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the connector assembly.

 

1) Remove connector caps.


2) Ensure the connectors are both set to the same keying position colour or numbered (no colour or number for default 12 o’clock position on BR/CR) and are of the same insert type.
It should be noted that colour coded and numbered connector bodies are mutually interchangeable.

 

 

3) Engage the CP connector with the BR / CR connector and align the keyway on the CP connector to the key on the BR / CR connector.

 

 

 

4) Engage the two connectors by screwing the engaging nut clockwise without interruption onto the BR/CR shell. If the threads will not engage, the connectors
are set to different keying positions.

 

 

5) If anti-vibration protection is required, tighten the grub screw on the CP shell.

 

 

6) To disconnect, slacken the tightened grub screw, turn the engaging nut anti-clockwise and remove the connector. Fit the caps.

 

Technical Data

InstrumEx Spec.pdf

InstrumEx Manual 20140403.pdf

InstrumEx BRO 200808XX.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Power Connector, PowerEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Power Connector, PowerEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다.

 

 

Hawke

PowerEx Termination Procedure

 

IMPORTANT NOTE
Hawke International does not recommend the use of their Power Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable / semi-portable applications.


In addition, Hawke recommends that barrier type glands are fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components. 

 

 

 

 

CP / CR PROCEDURE
1) Terminate the cable into the Exd cable gland as per the manufacturer’s instructions. Consider at this stage the relative position of the phases.

 

 

 

2) Cut the conductors to the lengths shown. (For earth conductors which are being terminated to the earth ring (see step 6) but not carried through the contact, cut back X = 100mm for all sizes, see 10 - 13)

 

 

 

3) Strip back the insulation as shown. (For all earth conductors terminated via the internal earth ring, cut back the insulation flush with the gland entry thread, see 10 - 13).

 

 

 

4) Unscrew the rear engaging nut from the CP / CR shell. Remove the rear shell, spacer tube and insert from the CP / CR shell.

 

 

5) a) CONTACT SIZES 50 - 240mm².

Remove the screws from the front of the contacts only and push the crimp lugs out of the insert.

 

 

b) CONTACT SIZES 300 – 630mm².

Remove the screw from the plastic housing and remove the contact from inside.

 

 

 

6) Remove the internal earth ring from the rear shell sub assembly by backing off the 2 grub screws on the flats. If internal earthing is not required, the internal earth ring assembly along with the fixing grub screws should be discarded.

 

 

 

7) Crimp the lugs or contacts onto the conductors

(excluding internal earth wire if being used) using suitable crimp tool. (Hawke recommend Elpress crimp tools).
Contact sizes of 185mm² and larger should be adjacently double crimped as shown.

 


 

8) Feed the conductors through the rear shell assembly and screw this onto the cable gland entry thread ensuring the sealing washer is present.

 

 

 

9) Measure the distance from the front of the rear shell to the end of the crimp lug (50 – 240mm²) or contact (300 - 630mm²). It should be as shown. If not, remove the rear shell and add or remove the spacer washers supplied to get the required length. At least 1 washer must be present to maintain IP rating.

 

 

 

Internal earth procedure (skip to step 13 if not used or you have single phase connector).


10) Slide the internal earth ring down over the conductors with the lug going over the bare earth wire.

 

 

 

 

11) Position the internal earth ring inside the rear shell and tighten the grub screws into the groove on the earth ring. Excessive force could distort rear shell.

 

 

 

 

 

12) Tighten the 2 grub screws on the internal earth lug into the earth conductor as tight as possible so that the earth wire is sufficiently clamped. If earth is to be carried through to a contact, crimp contact prior to tightening grub screws.

 

 

 

 

13) Slide the spacer tube over the conductors and onto the rear shell.

 

 

 

 

14) a) CONTACT SIZES 50 - 240mm².
Push the insert assembly fully onto the crimp lugs. The insert should push inside the spacer tube. Refit the 4 screws into the ends of the contacts. Ensure these are fully tightened.

 

 

 

 

b) CONTACT SIZES 300 – 630mm².
Push the rear retainer over the contact. Place the split tube around the contact. Slide the front contact retainer over the contact and split tube. Slide the rear contact retainer over the rear of the contact and tighten the screw fully.

 

 

 

15) Slide the CP / CR shell over the insert and line the yellow dot on the insert up with the required keying position 1 to 5 marked on the CP / CR shell.

 

 

16) Screw the rear engaging nut fully onto the CP / CR shell.
Measure the distance between the front of the rear engaging nut to the back of the engaging nut which should be no greater than the distance shown.

 

 

 

17) Tighten down the 2 grub screws on the rear engaging nut.

 

 

 

18) Terminate the equipotential external earth to the ring terminal crimp provided if applicable. Remove the button head screw, spring washer and crimp from the rear engaging nut. Crimp the external earth wire into the crimp and reassemble.

 

 

 

19) Refit the protective or flameproof cap if applicable.

 

 

 

20) The connector is now ready for installation. Please refer to the hook up procedure.

 

 

 

HOOK UP PROCEDURE
Before commencing hook up, a visual inspection should be carried out on the cable / gland / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly  components have loosened during transportation/cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the cable gland/connector assembly. No hazardous gases should be present.

 

1) Turn off the power to the connectors.


2) Ensure the connectors are both set to the same keying position number, are of the same insert type and phase orientation.

 

 

3) Engage the CP connector with the BR / CR connector and align the key on the CP connector to the keyway on the BR / CR connector.

 

 

4) Engage the two connectors by screwing the engaging nut clockwise onto the BR/CR shell. If the engaging nut will not screw on more than half a turn, then the connectors are set to different keying positions.

 

 

5) Fully tighten the engaging nut with strap wrench if necessary and then tighten the grub screw on the engaging nut.

 

 

 

6) To disconnect, turn off the power (no hazardous gases should be present), slacken the tightened grub screw, turn the engaging nut anti-clockwise and remove the connector. If power is to be put through the connectors whilst demated, then a flameproof cap (available separately) must be fitted.

 

 

Technical Data

PowerEx Spec.pdf

PowerEx Manual 20070619.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Exd Connector, PowerEx 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 방폭커넥터 제품군 가운데, Power 연결 애플리케이션에 적합한 Hawke PowerEx 시리즈를 살펴보도록 하겠습니다.

HAWKE

Range For Harsh and Hazardous Locations

Hazardous Area Connector

PowerEx

IECEx/ATEX Certificate 

 

Overview

The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications.

 

 

 

Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request.

 

 

Tamb: -40°C to +60°C.

II2 GD Exd IIC ExtD T85.

IP66, 67

DTS01 deluge protected.

 

 

 

 

Hawke Exd Connector Range For Harsh and Hazardous Locations, PowerEx

 

Technical Data

PowerEx Spec.pdf

PowerEx Manual 20070619.pdf

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Thread Conversion Solutions Fixed Elbows 496(F to F) Series 기술사양 소개 (UPD20140531)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 05월 31일자로 업데이트된 호크 케이블글랜드의 Thread Conversion Solutions 자료 가운데, 496시리즈 (F to F) 90˚ Fixed Elbow에 대해 살펴보겠습니다.

 

 

 

HAWKE International

A Division of Hubbell Incorporated

90˚ Fixed Elbow

496 Series

Hazardous Area

Flameproof Exd

Increased Safety Exe

Dust Protection Extb

Dual Certified ATEX/IECEx

 

 

 

  

 

Certification Details

Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2GD.

• Certifi cate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U.

• Operating Temperature Range -60°C to +200°C.

• Group II and III.

 

 

 

 

 

 

General Information

• Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel.

• M20 to M75 as standard.

• Other parallel male thread options available on request, including BSPP, PG, ET and NPSM.

• NPT female threads can also be supplied in sizes ranging from ½ " to 3".

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.

• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31.

• Ingress Protection: IP66.

• Assembly Instruction Sheet: AI 430.

 

 

 

 

 

Note:

Diff erent thread sizes and types are permitted at each end of the elbow, a step of one thread size is permitted between the two threads. Where diff erent thread types/sizes are supplied, the overall dimensions may increase in size.

 

 

 

 

 

Ordering Example :

496/M32 Female x M32 Female 1.5mm Brass Nickel Plated

 


Technical Data :

496 Spec IDK 20140531.pdf

494 IDK Spec 20140531.pdf

495 IDK Spec 20140531.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Thread Conversion Solutions Fixed Elbows 495 (M to M) Series 기술사양 소개 (UPD20140531)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 05월 31일자로 업데이트된 호크 케이블글랜드의 Thread Conversion Solutions 자료 가운데, 495시리즈 (M to M) 90˚ Fixed Elbow에 대해 살펴보겠습니다.

 

 

 

 

HAWKE International

A Division of Hubbell Incorporated

90˚ Fixed Elbow

495 Series

Hazardous Area

Flameproof Exd

Increased Safety Exe

Dust Protection Extb

Dual Certified ATEX/IECEx

 

 

 

 

 

Certification Details

• Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and
Dust Extb IIIC Db II 2GD.

• Certifi cate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U.

• Operating Temperature Range -60°C to +200°C.

• Group II and III.

 

 

 

General Information

• Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel.

• M20 to M75 as standard.

• Other thread options available on request, including BSPP, PG, ET and NPSM. NPT threads are not permitted.

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.

• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31.

• Ingress Protection: IP66.

• Assembly Instruction Sheet: AI 429.

 

 

Note:

Diff erent thread sizes and types are permitted at each end of the elbow, a step of one thread size is permitted between the two threads. Where diff erent thread types/sizes are supplied, the overall dimensions may increase in size.

 

 

 

 

Ordering Example :

495/M32 Male x M32 Male 1.5mm Brass Nickel Plated

 

 

 


Technical Data :

495 IDK Spec 20140531.pdf

496 Spec IDK 20140531.pdf

494 IDK Spec 20140531.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (957)
TIA (92)
TIP (194)
TIEx (601)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)