Killark KDE Series Drain Breather 신제품 출시안내


안녕하세요 TIATIP 입니다. KILLARK(킬락)에서 새롭게 선보이는 Drain Breather, Breather Darin 제품군인 KDE Series에 대해 간략한 소개자료를 포스팅합니다.



Hubbell Harsh & Hazardous


KDE Series

Drain Breather / Breather Drain

for Harsh and Hazardous Environments




• cCSAus, ATEX, IEC Ex Certified for Class I Div. 2 & Ex e Zone 1 Hazardous Areas
• Small Compact Size With Low Profile-Supplied With 316 Stainless Steel Locknut
• Available in Fiberglass, 316 Stainless Steel, Aluminum & Brass
• Wide Chose of Thread Sizes, 1/2 NPT, 3/4 NPT, M20 & M25
• Type 4, 4X and IP66 Certified for Hose Down and Harsh Areas
• For Use in Ambient Temperatures Ranging From -55°C to +80°C



KDE Series Drain Breather





When installed in the bottom of a thin wall enclosure the KDE allows water from
condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal.



• Silicone o-ring supplied as standard and suitable for use in a -55°C to +80°C
temperature range.
• Varity of thread sizes 1/2 & 3/4 NPT, 1/2 & 3/4 NPSM, M20 & M25.
• Available in 300 series stainless steel, 316 stainless steel, aluminum and 30% glass filled nylon.
• Internal 316 stainless steel locknut supplied as standard. When tighten to
the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66



• 303 or 304 stainless steel, 316 stainless steel, brass, aluminum or 30% glass filled nylon.
• Internal locknut 316 stainless steel.
• High temp silicone o-ring






Class I, Div. 2, Groups A, B, C, D
Class l, Zone 1 & 2, Ex e / AEx e llC, A/Ex tb
Class II, Div. 1j & 2, Groups E, F, G
Class III, Ambient Temperature Range -55°C to +80°C
Enclosure Type 3, 4 & 4Xk IP66
Ex II 2 G D    CE 0539
Ex e IIC Gb
Ex tb IIIC Db IP66
Ta = -55°C to + 80°C


CSA 2714851

IECE x QPS 15.0 0 0 2X 




Killark KDE Series Drain Breather

Catalog Number Logic : KDE - 1st   2nd   3rd


1st : Material Type

AL = Alum
BR = Brass
S3 = 303 Stainless Steel
S4 = 304 Stainless Steel
S6 = 316 Stainless Steel
GF = 30% Glass Filled Nylon


2nd : Plating Type

0 = Unplated
1 = Nickel
2 = Zinc
6 = Chromatise
8 = Electroles Nickel


3rd : Thread Size Type

M20 = M20 Metric
M25 = M25 Metric
050 = 1/2". NPT
075 = 3/4". NPT
050NPSM = 1/2". NPSM
0705NPSM = 3/4". NPSM


Technical Data

Breather Drain HKCS KDE.pdf

Breather Drain DPE Spec.pdf

Breather Drain FlameArrestor Cat 2014XXXX.pdf

Breather Drain CAT 2005XXXX.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.





국내 상담문의 및 기술지원




댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

까다롭고 위험한 지역에서 실력을 발휘하는 호크케이블글랜드의 차별화된 특성 5가지


안녕하세요 TIATIP 입니다.

오늘 이시간에는 Hawke cable gland 가 Flameproof and Increased safety를 요구하는 Harsh and Hazardous Area를 만나 발휘되는 주요 장점 5가지를 살펴봅니다.





1. Unique Rear Sealing System
This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.



2. Unique Inspectable Compound Chamber
The revolutionary Hawke compound chamber has been designed with
inspectability in mind. The pre-lubricated compound chamber can be removed
once the compound has fully cured, allowing full inspection of the flameproof seal. If required minor surface voids can be repaired in situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal, resulting in reduced piece parts, as there is no longer a requirement to separate the seal from the compound chamber.






3. Zero Cable Damage
The unique Hawke diaphragm sealing system does not damage cable with
'Cold Flow' characteristics. The diaphragm type seal is the only elastomeric seal to comply fully with EN 60079-14 and IEC 60079-14 and is therefore suitable on cables which would otherwise require barrier style cable glands.
The Hawke diaphragm seal is also unique in that it is the only flameproof
elastomeric seal that can be visually inspected in operation - A real benefit to
ATEX inspectors.




4. The Original Reversible Armour Clamp
The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accomodate all types of cable armour or braid. Unlike many of our competitors the correct clamping orientation is marked clearly with a 'W', 'Z' or 'X' and backed up by the presence of a groove in the component. Hawke's RAC clamping system is also fully inspectable when positioned on the cable.






5. Inspectable Deluge Seal
Hawke's inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01.




Indeed Hawke's deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which could potentially corrode the cable armour








기술문의 및 제품상담

고객성공  아이디케이






댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark 킬락 방폭접속자재 카타로그


안녕하세요 TIATIP입니다.


오늘 이 시간에는 킬락방폭접속자재 가운데 커넥터와 피팅류에 대하여 살펴보겠습니다.





Killark Connectors and Fittings


A major factor in all harsh and hazardous environments is the ability to provide reliable cable terminations and conduit connections.


Copper-Free Aluminum Connectors are designed to terminate jacketed interlocked cables (MC), corrugated continuously welded metal clad cables (MC-HL) and non-armored cables (SO, TC) Iron and Aluminum Fittings for rigid and IMC conduit raceway systems.


Third party certified to NEC, CEC, ATEX and IEC standards which enables equipment and installations to be suitable for global applications



 Killark Fittings






· K-PAK® - Shelf Cartons

· Duraloy® 7 Series - Aluminum or Iron Conduit Bodies

· Duraloy® 8 Series - Iron conduit Bodies

· O Series and Duraloy® 5 Series - Aluminum or Malleable Iron Conduit Bodies

· CO & Two Series - Aluminum Conduit Bodies

· MO Series, MOL Series, NECLB Series - Aluminum or Iron Mogul Conduit


· SLB Series, SLBM Series, SOLB Series, MLB Series - Service Entrance

· WH Series - Conduit Hubs

· CL Series, CLM Series, TWCL Series - Pulling Elbow, Duct Seal

· FB Series, STFB Series - Service Entrance

· F Series - Cast Device Boxes, Covers, Accessories

· FSQ Series and FDQ Series - Custom Drilled & Tapped Device Boxes,

                                            Covers, Accessories

· VJ Series - Outlet Boxes









· ENY Series, EY Series, EYS Series, EYD Series - Sealing, Fittings,

                                                                         Sealing Materials

· ENY40 Series, EYD40 Series - 40% Fill Sealing Fittings

· GEB Series, GE Series, GRUE Series - Aluminum and Iron Outlet Bodies

· GR Series - Outlet Bodies

· X Series, XALB Series - Conduit Bodies

· JL Series, JAL Series - Outlet Bodies
· GU Series, UN Series - Unions
· UNF Series, UNY Series - Expansion Conduit Unions
· PLUG Series, CUP Series, AN Series - Threaded Insert Plugs, Rigid Conduit

· KDB Series, KB Series - Drains and Breathers, Flame Arrestors
· R Series, RE Series, ADUP Series - Reducing Bushings and Adapters

· ELBOWS ECF Series, EKJ Series - Bronze Flexible Couplings

· ECFUF Series, EKJUF Series - Bronze Flexible Couplings with Female Steel

· EKJ Series - Stainless Steel Flexible Couplings.







· K Series - Liquidtight Connectors
· Z Series - Aluminum Cord Connectors, Increased Safety Cord Connectors
· Z Series - Nylon Cord Connectors Increased Safety Cord Connectors
· CTCA Series - Connectors for Tray Cable
· CMCA Series, MC Series - Metal Clad Cable Connectors
· CMCXA Series, MCX Series - Hazardous Location, Metal Clad Cable

· SWZ Series, LZN Series - Sealing Washers, Locknuts

· ZHLN Series - Increased Safety Locknuts
· PCC Series, ECC Series, RACC Series - Conduit Clamps







Killark 킬락 Connectors Fittings 종합 01.pdf

Killark 킬락 Fitting Connect TFFC 01.pdf

Killark 킬락 Fitting KPAK 01.pdf




국내 기술지원 및 상담구매처





댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

안녕하세요 TIATIP 입니다.


오늘은 Killark 킬락의 방폭플러그와 방폭리셉터클에 대해 살펴봅니다.



Killak 킬락 Plugs and Receptacles


Ranging from 20 Amp bladed style to 200 Amp pin & sleeve configurations, Killark provides numerous solutions for safely supplying power to fixed and portable equipment in hostile environments.Interchangeability with the other manufacturers configurations provides user flexibility for real world applications.



The range also has exclusive features such as breech-lock caps with a “3rd Hand” notch. Devices include plugs, receptacles, panel receptacles, and connectors to extend the reach of portable equipment. For personnel safety, ground fault protected receptacles, both portable and fixed, are available.




Plugs and Receptacles (Section PR)


· VP Series - 30 amp including new AT model

· VR Series - 60 amp including new AT model

· VPR Series - 100 amp including new AT model

· VSQ Series - 200 amp

· VWSQ Series - Interlocked Switched Receptacles

· VSQ-FS Series - Factory Sealed Receptacles

· VBQ Series - Interlocked Breaker Protected Receptacles

· VSI Series - Plugs and Switched Receptacles

· VCR SEries - Clean Room Receptacles

· KR Series - 20 amp, 30 amp, 60 amp

· UGP Series and UGR Series - Plugs and Receptacles, Adapter, Grips

                                           and Handlamps

· UGRC Series - Connector

· UGRP Series - GFI Protector Receptacle

· UGRGF Series - GFI Protector Receptacle

· UGFI Series - Ground Fault Protector







Killark 킬락 Plug Receptacle종합 PR 01.pdf

Killark 킬락 Plug Receptacle SBVAT 01.pdf

Killark 킬락 Plug Receptacle TFACPR 01.pdf

Killark 킬락 Plug Receptacle TFVPR 01.pdf



내 기술지원 및 구매상담처





댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Cable Glands 악세서리모음


안녕하세요 TIATIP 입니다.


오늘 이시간에는 앞서 살펴보았던 케이블그랜드에 추가로 검토되어야 하는 최적의 악세서리군을 소개하도록 하겠습니다. 각각의 사이트환경과 최종고객사와 EPC사등이 제안하는 RFQ등을 꼼꼼히 살펴보아야 하며, 특히 방폭규정과 국제표준에 위배되지 않는지 기술평가가 이루어져야 할 것입니다.



Adaptors And Reducers


Provides a means of attachment between dissimilar thread types or thread sizes.


  • Type 476 Adaptors And Reducers




  • Type 383 Earth Lead Adaptor



  • Type 479 Inline Adaptor (Male to Male)




  • Type 480 Inline Adaptor (Female to Female)





    Earth Tags


    Earthtags are installed between the cable gland and equipment to provide an earth/bond connection.








    Entry Thread Sealing Washers


    For use at the cable gland/enclosure interface to maintain the ingress protection rating of the equipment.









    Locknuts are used to secure the cable gland body to the cable gland plate or the equipment.







    Stopping Plugs


    Provides a means of sealing and stopping unused threaded entries in enclosures where the certification requires the use of stopping plugs.









    We offer a range of shrouds which are used to minimise the risk of dirt or foreign substances gathering on the cable gland body.






    Insulated Adaptors


    Provides electrical insulation between a cable gland or a conduit fitting and an electrical enclosure.







    Blanking/Adaptor Flanges


    To close unused cable gland entries and maintain the flameproof integrity of the equipment. To allow metric threaded group 1 cable gland types (653/Universal, 653/T, 623, 453/T, 453/Universal and 453/RAC) to be used in size up spigot entries.





    Breather Draining Devices


    Provides a method of preventing moisture build-up within a hazardous area approved enclosure whilst ensuring the integrity and Ex approval of the installation is maintained.







    In-Line Swivel Couplings







    Swivel Elbows










    Type 481 (M to F) Union






    Type 482 (F to F) Union




    각 제품(악세서리)별 상세사양은 첨부파일을 참고하시기 바랍니다.

    2012년까지 제작된 버전과 새롭게 Hawke 전용라인을 통해 공급될 2013년이후 버전이 함께 사용될 수 있겠습니다.





    Hawke 호크 Accessories 01.pdf

    Hawke 호크 Thread Conversion 01.pdf



    국내 기술지원 및 상담구매처




    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    BLOG main image
    공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP


    TI Story (971)
    TIA (98)
    TIP (194)
    TIEx (608)
    TIS (36)
    TiNoTe (10)
    TIO (23)
    The OtherS (1)