Killark KDE Series Drain Breather 신제품 출시안내


안녕하세요 TIATIP 입니다. KILLARK(킬락)에서 새롭게 선보이는 Drain Breather, Breather Darin 제품군인 KDE Series에 대해 간략한 소개자료를 포스팅합니다.



Hubbell Harsh & Hazardous


KDE Series

Drain Breather / Breather Drain

for Harsh and Hazardous Environments




• cCSAus, ATEX, IEC Ex Certified for Class I Div. 2 & Ex e Zone 1 Hazardous Areas
• Small Compact Size With Low Profile-Supplied With 316 Stainless Steel Locknut
• Available in Fiberglass, 316 Stainless Steel, Aluminum & Brass
• Wide Chose of Thread Sizes, 1/2 NPT, 3/4 NPT, M20 & M25
• Type 4, 4X and IP66 Certified for Hose Down and Harsh Areas
• For Use in Ambient Temperatures Ranging From -55°C to +80°C



KDE Series Drain Breather





When installed in the bottom of a thin wall enclosure the KDE allows water from
condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal.



• Silicone o-ring supplied as standard and suitable for use in a -55°C to +80°C
temperature range.
• Varity of thread sizes 1/2 & 3/4 NPT, 1/2 & 3/4 NPSM, M20 & M25.
• Available in 300 series stainless steel, 316 stainless steel, aluminum and 30% glass filled nylon.
• Internal 316 stainless steel locknut supplied as standard. When tighten to
the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66



• 303 or 304 stainless steel, 316 stainless steel, brass, aluminum or 30% glass filled nylon.
• Internal locknut 316 stainless steel.
• High temp silicone o-ring






Class I, Div. 2, Groups A, B, C, D
Class l, Zone 1 & 2, Ex e / AEx e llC, A/Ex tb
Class II, Div. 1j & 2, Groups E, F, G
Class III, Ambient Temperature Range -55°C to +80°C
Enclosure Type 3, 4 & 4Xk IP66
Ex II 2 G D    CE 0539
Ex e IIC Gb
Ex tb IIIC Db IP66
Ta = -55°C to + 80°C


CSA 2714851

IECE x QPS 15.0 0 0 2X 




Killark KDE Series Drain Breather

Catalog Number Logic : KDE - 1st   2nd   3rd


1st : Material Type

AL = Alum
BR = Brass
S3 = 303 Stainless Steel
S4 = 304 Stainless Steel
S6 = 316 Stainless Steel
GF = 30% Glass Filled Nylon


2nd : Plating Type

0 = Unplated
1 = Nickel
2 = Zinc
6 = Chromatise
8 = Electroles Nickel


3rd : Thread Size Type

M20 = M20 Metric
M25 = M25 Metric
050 = 1/2". NPT
075 = 3/4". NPT
050NPSM = 1/2". NPSM
0705NPSM = 3/4". NPSM


Technical Data

Breather Drain HKCS KDE.pdf

Breather Drain DPE Spec.pdf

Breather Drain FlameArrestor Cat 2014XXXX.pdf

Breather Drain CAT 2005XXXX.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.





국내 상담문의 및 기술지원




댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Cable Glands 악세서리모음


안녕하세요 TIATIP 입니다.


오늘 이시간에는 앞서 살펴보았던 케이블그랜드에 추가로 검토되어야 하는 최적의 악세서리군을 소개하도록 하겠습니다. 각각의 사이트환경과 최종고객사와 EPC사등이 제안하는 RFQ등을 꼼꼼히 살펴보아야 하며, 특히 방폭규정과 국제표준에 위배되지 않는지 기술평가가 이루어져야 할 것입니다.



Adaptors And Reducers


Provides a means of attachment between dissimilar thread types or thread sizes.


  • Type 476 Adaptors And Reducers




  • Type 383 Earth Lead Adaptor



  • Type 479 Inline Adaptor (Male to Male)




  • Type 480 Inline Adaptor (Female to Female)





    Earth Tags


    Earthtags are installed between the cable gland and equipment to provide an earth/bond connection.








    Entry Thread Sealing Washers


    For use at the cable gland/enclosure interface to maintain the ingress protection rating of the equipment.









    Locknuts are used to secure the cable gland body to the cable gland plate or the equipment.







    Stopping Plugs


    Provides a means of sealing and stopping unused threaded entries in enclosures where the certification requires the use of stopping plugs.









    We offer a range of shrouds which are used to minimise the risk of dirt or foreign substances gathering on the cable gland body.






    Insulated Adaptors


    Provides electrical insulation between a cable gland or a conduit fitting and an electrical enclosure.







    Blanking/Adaptor Flanges


    To close unused cable gland entries and maintain the flameproof integrity of the equipment. To allow metric threaded group 1 cable gland types (653/Universal, 653/T, 623, 453/T, 453/Universal and 453/RAC) to be used in size up spigot entries.





    Breather Draining Devices


    Provides a method of preventing moisture build-up within a hazardous area approved enclosure whilst ensuring the integrity and Ex approval of the installation is maintained.







    In-Line Swivel Couplings







    Swivel Elbows










    Type 481 (M to F) Union






    Type 482 (F to F) Union




    각 제품(악세서리)별 상세사양은 첨부파일을 참고하시기 바랍니다.

    2012년까지 제작된 버전과 새롭게 Hawke 전용라인을 통해 공급될 2013년이후 버전이 함께 사용될 수 있겠습니다.





    Hawke 호크 Accessories 01.pdf

    Hawke 호크 Thread Conversion 01.pdf



    국내 기술지원 및 상담구매처




    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    BLOG main image
    공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP


    TI Story (970)
    TIA (98)
    TIP (193)
    TIEx (608)
    TIS (36)
    TiNoTe (10)
    TIO (23)
    The OtherS (1)