Chalmit ARRAN  Industrial LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Chalmit 에서 새롭게 선보이는 Industrial Type의 LED Floodlight ARRAN Series 를 소개드리도록 하겠습니다.

 

 

 

 

Chalmit Lighting

ARRAN Series

LED Floodlight

Industrial and Marine Applications

 

 

The Arran LED floodlight range is low energy with an instant on output and up to 130,000 maintenance free hours.
Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used for industrial applications.

 

 

Chalmit ARRAN Series - Technical Data & Std. Cat. No.

 

Arran LED Industrial IP66 201411XX.pdf

 

ARRI/06L/LE,ARRI/10L/LE,ARRI/11L/LE,ARRI/15L/LE

ARRI06LLE,ARRI10LLE,ARRI11LLE,ARRI15LLE

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다. 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit ARRAN Exn LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Chalmit에서 새롭게 선보이는 LED Floodlight 인 ARRAN Series에 대해 함께 살펴보고자 합니다.

 

 

 

Chalmit Lighting

Exn LED Floodlighting

ARRAN

ATEX Category3

Zone2 & Zone22 Applications

 

 

 

The Arran LED floodlight range is low energy with an instant on output and 80,000 maintenance free hours to L70 (70% initial lumens). Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used in locations where flammable vapours, gases or combustible dusts exist.

 

 

Chalmit ARRAN Series - Technical Data & Std. Cat. No.

 

Arran LED Exn Zone2 201408XX.pdf

 

ARRN/06L/LE,ARRN/10L/LE,ARRN/11L/LE,ARRN/15L/LE

ARRN06LLE,ARRN10LLE,ARRN11LLE,ARRN15LLE

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Emergency Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Emergency Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit

Protecta Emergency Luminaire

Surface Mounted Fluorscent

 

 

 

 

 

 

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions.

As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

The Protecta Emergency comes complete with integral three hour Ni-Cd battery backup. The incoming mains supply to the luminaire has the facility for two live supplies: continuous live (Lc) which supplies constant power to the battery and switched live (Ls) which is for external switching, allowing the luminaire to be locally switched off without the emergency battery pack unintentionally operating the lamps.

If external switching is not required Lc and Ls are made common at the mains terminal block. ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available.

 

 

 

 

CAT Ref.

PRGI/118/BI

PRGI/118/BI/EM

PRGI/136/BI

PRGI/136/BI/EM

PRGI/218/BI

PRGI/218/BI/EM

PRGI/236/BI

PRGI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

ProtectaE Emergency Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

Chalmit

Protecta Luminaire

Surface Mounted Fluorscent

 

 

 

 

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

CAT REF.

PRGI/118/BI

PRGI/118/BI/EM

PRGI/136/BI

PRGI/136/BI/EM

PRGI/218/BI

PRGI/218/BI/EM

PRGI/236/BI

PRGI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

Protecta Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Industrial Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 일반산업환경에 적용가능한 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Protecta Luminaire

Surface Mounted Fluorscent

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

 

(2) Chalmit Protecta Emergency Luminaire

Surface Mounted Fluorescent

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions.

As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

The Protecta Emergency comes complete with integral three hour Ni-Cd battery backup. The incoming mains supply to the luminaire has the facility for two live supplies: continuous live (Lc) which supplies constant power to the battery and switched live (Ls) which is for external switching, allowing the luminaire to be locally switched off without the emergency battery pack unintentionally operating the lamps.

If external switching is not required Lc and Ls are made common at the mains terminal block.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available.

 

 

 

 

 

(3) Chalmit Protecta Stainless Steel Luminaire

Surface Mounted Fluorescent

The Protecta industrial fluorescent is available with a stainless steel body. Protecta has excellent durability as it is constructed using high grade 316S31 stainless steel and a polycarbonate diffuser. A standard non-emergency and emergency versions are available in both 18W and 36W lamp options.

The product is intended for industrial applications where chemical agents are present which could attack GRP bodied luminaires. The stainless steel enclosure affords a high degree of ingress protection(IP66/67). Its design also utilised the Protecta's key features providing ease of access to lamps and control gear. This ensures that installation and maintenance will be completed quickly and efficiently.

The Emergency version is also available complete with 3 hour Ni-Cad battery back-up.

 

 

 

 

 

(4) Chalmit Acclaim  Luminaire

Recessible Fluorescent

The Acclaim recessible lighting range is suitable for a range of industry standard ceiling types. Available as both emergency and non-emergency versions, the Acclaim can be used with 18W or 36W fluorescent lamps. The Acclaim has an IP ratnig of IP54 and is also certified to for use in fire resistant ceilings up to solas B15 rating.

 

The polycarbonate diffuser is avaiable in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light output and duration in accordance with emergency lighting standards.

ATEX Category 2 (Zone 1) hazardous area versions are available.

 

 

 

 

 

(5) Chalmit Sterling II Luminaire

Surface Mounted Fluorescent

The Sterling II is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a 230/240V 50Hz copper and iron ballast as standard, available in 18W, 36W and 58W fluorescent lamp options. Other supply voltage options are available.

Emergency models have an internal Ni-Cad battery.
Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with high frequency electronic ballast; please refer to the Sterling II HF product page for details.

 

 

 

 

 

(6) Chalmit Sterling II High Frequency Luminaire

Surface Mounted Fluorescent

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.

 

 

 

 

 

(7) Chalmit Sterling II Stainless Steel Luminaire

Surface Mounted Fluorescent

The Sterling II luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a copper & iron switchstart ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Highfrequency ballast (HF), please refer to the appropriate product page for details.

 

 

 

 

 

(8) Chalmit Curie Luminaire

Recessible Fluorescent

The Curie range of fluorescents is available in normal and emergency versions is designed purposely for use industrial applications where  recessible emergency lighting is required. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with the textured side facing downwards. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light output and duration in accordance with emergency lighting standards and comprehensice battery management & automatic self-testing is available as an option.

 

 

 

 

(9) Chalmit Sterling II HF Stainless Steel

Surface Mounted Fluorescent

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas, available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic control gear, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.

 

 

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Zone 2 Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 방폭위험지역 Zone 2에 적용가능한 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Sterling II Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II s a quality and cost effective luminaire designed to provide instant glare free white light for Zone 2 hazardous areas.

The GRP body and polycarbonate diffuser is secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance. The protection is Ex n with IP65 sealing.

The Sterling II is designed as a single product for both Gas & Dust atmospheres and is certified under the ATEX 94-9-EC directive for Categories 3 G and 3 D. The range is also IECEx compliant.

The Sterling is suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

 

 

 

 

 

(2) Chalmit Sterling II Emergency Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II emergency fluorecent luminaire designed for Zone 2 areas with a 3 hour emergency duration. The GRP body and polycarbonate diffuser are secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance.

The Sterling II is designed as a single product for both Gas & Dust atmospheres. It is certified with Ex n protection under the ATEX 94-9-EC directive for Categories 3 G and 3 D and has IP65 sealing. The range is also IECEx compliant.

The Sterling suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

 

 

 

 

 

(3) Chalmit Sterling II Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II stainless is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear and high frequency ballast.

 

 

 

 

 

(4) Chalmit Sterling II Emergency Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II stainless emergency is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage. The emergency version provides safety critical lighitng for three hours in the event of a mains power failure.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear.

 

 

 

 

 

(5) Chalmit Protecta II Luminaire

Ex n Fluorescent / ATEX Category 3

The Protecta Category 3 Ex n luminaire combines the strength and integrity of the Category 2 increased safety enclosure with the Category 3 lamp and control gear package used in the Sterling. The range is suitable for T8 tubular fluorescent lamps in the nominal 18W and 36W sizes.

Protecta is constructed using glass reinforced polyester (GRP) and polycarbonate which resist saline and other corrosive environments. A key feature is the Protecta's rugged duribility. This comes from strength of the enclosure combined with toughened mounting points together and the very high degree of ingress protection.
 
The Zone 2 luminaire certified Ex n with IP66/67 sealing for ignitable gas and dust applications. The ATEX Categories are 3 G and 3 D.

The simple design and ease of access to lamps and control gear means that installation and maintenance can be completed quickly and efficiently. The Protecta offers the facility of four cable entries. The standard range has electronic control gear and all
emergency versions come  complete with 3 hour battery duration.

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 487 EPDM Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 일반산업형 조명군 가운데 Chalmit 487 EPDM Floodling 사양에 대해 살펴보도록 하겠습니다.

 

 

Chalmit Lighting

487 EPDM Floodlight

Industrial Application

  

 

 

The Chalmit 487 compact, robust and weatherproof EPDM floodlight is versitile in its mounting suitability as this is available in a base-mounted version (/B) and pole-mounted option (/P). The range has excellent vibration resistance making it ideal for use in hostile marine environments.

 

 

Manufactured from EPDM rubber, the Chalmit 487 has a toughened front glass and wire guard for maximum protection. Ingress Protection of IP54 (with wire guard) and IP67 version available (silicone sealing ring fitted to glass. No guard fitted) with the suffix of /IP67 to the partcode.

 

 

 

 

The Chalmit 487 is suitable for GLS lamps up to 200W wtih a recommended maximum continuous operating ambient temperature of +30°C and a minimum temperature of -40°C.

 

 

CAT REF.

487I/200/GL


 

Technical Data

487 Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Industrial Eclipse II Well-Glass 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 비방폭형(일반산업형) 조명가운데 Chalmit Eclipse II Well-Glass 사양에 대해 살펴보도록 하겠습니다.

Chalmit Lighting

Well-Glass

Industrial Type

Eclipse II Well-Glass

Highbay Luminaire

 

 

 

The Eclipse II is a robust wellglass/highbay luminaire suitable for high pressure discharge lamps of up to 400W.

 

It has a lightweight corrosion resistant cast aluminium body and heat resistant glass construction complete with stainless steel fasteners. It has been tested to IP65 and is suitable for use in harsh industrial environments. 
 

 

 

The lamp glass has a screwed thread for quick access. The control gear housing hinges on the mounting and termination cover and is held in position by a single screw barrel nut. The single screw barrel nut permits easy access and closure of the luminaire during installation,should maintenance be required.

 

These is a range of wall, surface and stanchion mountings which may be integrated into the design. An enclosed reflector for highbay applications is also available. A range of external reflectors is available to direct ight efficiently to where it is required.

A Zone 2 hazardous area version is available.

 

 

 

 

CAT Ref.

EC2I/050/HS

EC2I/070/MS

EC2I/080/MV

EC2I/100/

 

 

Technical Data (Datasheet)

Eclipse II Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Protecta II Luminaire 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Protecta II Luminaire 제품에 대해 살펴보도록 하겠습니다.   

 

 

 

 

Chalmit Lighting

Fluorescent

Protecta II Luminaire

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

 

 

The Protecta Category 3 Ex n luminaire combines the strength and integrity of the Category 2 increased safety enclosure with the Category 3 lamp and control gear package used in the Sterling. The range is suitable for T8 tubular fluorescent lamps in the nominal 18W and 36W sizes.

Protecta is constructed using glass reinforced polyester (GRP) and polycarbonate which resist saline and other corrosive environments. A key feature is the Protecta's rugged duribility. This comes from strength of the enclosure combined with toughened mounting points together and the very high degree of ingress protection.
 
The Zone 2 luminaire certified Ex n with IP66/67 sealing for ignitable gas and dust applications. The ATEX Categories are 3 G and 3 D.

The simple design and ease of access to lamps and control gear means that installation and maintenance can be completed quickly and efficiently. The Protecta offers the facility of four cable entries. The standard range has electronic control gear and all
emergency versions come  complete with 3 hour battery duration.    

  

 

 

 

 

CAT REF.

PR2N/136/BI

PR2N/136/BI/EM

PR2N/218/BI

PR2N/218/BI/EM

PR2N/236/BI

PR2N/236/BI/EM

NPRO4-0008

NPRO04-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0006

SPRO5-0005   

 

 

Technical Data(Datasheet)

ProtectaN Hazardous.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

  

   

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Sterling II Emergency Stainless Steel Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Sterling II Emergency Stainless Steel Luminaire  제품에 대해 살펴보도록 하겠습니다.   

 

 

 

Chalmit Lighting

Fluorescent

Sterling II Emergency Stainless Steel Luminaire  

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

 

 

The Sterling II stainless emergency is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage. The emergency version provides safety critical lighitng for three hours in the event of a mains power failure.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear.     

 

 

 

 

  

CAT REF.

SS2N/136/BI

SS2N/136/BI/EM

SS2N/158/BI

SS2N/158/BI/EM

SS2N/218/BI

SS2N/218/BI/EM

SS2N/236/BI

SS2N/236/BI/EM

SS2N/258/BI

SS2N/258/BI/EM

 

Technical Data(Datasheet)

Sterling IIE SS Emergency Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

  

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Sterling II Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Sterling II Luminaire 제품에 대해 살펴보도록 하겠습니다.

  

 

Chalmit Lighting

Fluorescent

Sterling II Luminaire  

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

The sterling II is a quality and cost effective luminaire designed to provide instant glare free white light for Zone 2 hazardous areas.

The GRP body and polycarbonate diffuser is secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance. The protection is Ex n with IP65 sealing.

The sterling II is designed as a single product for both Gas & Dust atmospheres and is certified under the ATEX 94-9-EC directive for Categories 3 G and 3 D. The range is also IECEx compliant.

The Sterling is suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

   

 

 

 

CAT REF.

ST2N/136/BI

ST2N/136/BI/EM

ST2N/158/BI

ST2N/158/BI/EM

ST2N/218/BI

ST2N/218/BI/EM

ST2N/236/BI

ST2N/236/BI/EM

ST2N/258/BI

ST2N/258/BI/EM

NPRO4-0008

NPRO4-0012

NPRO4-0022

S3004-100001

S3004-100003

S3004-100004

SPOL4-100004

SPOL4-100005

SPOL4-100006

 

Technical Data(Datasheet)

Sterling II Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Curie Elite Recessible Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Curie Elite Recessible Luminaire 제품에 대해 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

Fluorescent

Curie Elite Recessible Luminaire  

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

  

 

 

 

 

The Curie Elite range of Zone 1 fluorescents is available in normal and emergency versions. It is designed for use in Oil & Gas and Marine environments where it provides working, recessible emergency and escape lighting. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with textured side facing down. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

 

 

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light outpur and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration. .

 

SOLAS B15 Fire Rating

GOST Approved 

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

 

 

Please note: The Curie Elite is supplied with a high frequency self-test ballast. If using the Acclaim for sleeping quarters, please select the non-self test option (Suffix to Cat No. /NST).

   

 

 

CAT REF.

CUEE/218/BI

CUEE/418/BI

CUEE/236/BI

CUEE/436/BI

CUEE/218/BI/EM

CUEE/418/BI/EM

CUEE/236/BI/EM

CUEE/436/BI/EM

CUEE/218/BI/EM/MET

CUEE/218/BI/EM/MST

CUEE/418/BI/EM/MET

CUEE/418/BI/EM/MST

CUEE/236/BI/EM/MET

CUEE/236/BI/EM/MST

CUEE/436/BI/EM/MET

CUEE/436/BI/EM/MST

CUEE/218/BI/MET

CUEE/218/BI/MST

CUEE/418/BI/MET

CUEE/418/BI/MST

CUEE/236/BI/MET

CUEE/236/BI/MST

CUEE/436/BI/MET

CUEE/436/BI/MST

 

 

Technical Data(Datasheet)

CurieElite Zone1 Exe.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Acclaim Recessible Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Acclaim Recessible Luminaire  제품에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit Lighting

Fluorescent

Acclaim Recessible Luminaire  

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

 

 

 

 

 

The Acclaim range fluorescent luminaires is certified for use in Zone 1 and Zone 21 hazardous areas. It is designed for use in offshore accommodation areas and control rooms where it provides recessible emergency and escape lighting.

Manufactured from zinc coated sheet steel the luminaire is suitable for installation in fire resistant ceilings up to solas B15 rating. The polycarbonate diffuser is available in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed into a variety of ceiling types..

 

 

 


The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light out and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration.

 

IECEx Compliant

CSA Approved 

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

Please note: The Acclaim III is supplied with a high frequency self-test ballast. If using the Acclaim for sleeping quarters, please select the non-self test option (Suffix to Cat No. /NST).

   

 

 

CAT REF.

ACLE/218/BI

ACLE/218/BI/EM

ACLE/236/BI

ACLE/236/BI/EM

 

Technical Data(Datasheet)

Acclaim.pdf

  

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Lomond Emergency Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Lomond Emergency Luminaire 제품에 대해 살펴보도록 하겠습니다.

 

 

Chalmit Lighting

Fluorescent

Lomond Emergency Luminaire

Explosionproof

Zone1 Exd Fluorescent

ATEX CATEGORY 2

 

 

 

 

The Lomond Ex d fluorescent is a traditional flameproof luminaire for use with linear and compact fluorescent lamps. It is suitable for Zone 1 and Zone 21 hazardous areas.

The Lomond is designed for applications are where white instant light is needed. The aluminium and glass construction is suitable for aggressive chemical environments such as paint spraying, which could otherwise attack plastics.

 

 

An emergency version with the 8W lamp is particularly suitable for over door lighting. This is designed for maintained operation as standard, a non-maintained emergency option is also available.

The design features a single flameproof path giving easy access for wiring, lamp replacement and to the control gear. The cable entry is the simple direct type using flameproof Ex d cable glands.

 

 

ATEX Compliant

GOST Approved 

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

  

 

 

 

CAT REF.

LOMD/108/BI

LOMD/108/BI/EM

LOMD/136/BI

LOMD/158/BI

LOMD/208/BI

LOMD/218/BI

LOMD/218/BI/EM

LOMD/236/BI

LOMD/236/BI/EM

LOMD/258/BI

LOMD/258/BI/EM

SLOMD-000001

SLOMD-000003

SLOMD-000008

SLOMD-000009

SLOMD-000010

SLOMD-000019

SPATE-00005

SPATE-00006

SPATE-00007

SPATE-00008

SPATE-00009

SPATE-00012

SPOL4-100004

SPOL4-100005

SPOL4-100006

 

 

Technical Data(Datasheet)

Lomond.pdf

 

  

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Protecta III Stainless Steel Emergency  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Protecta III Stainless Steel Emergency 제품에 대해 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

Fluorescent

Protecta III Stainless Steel Emergency

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

 

 

 

 

 

The hazardous area Ex e Protecta III fluorescent is also available in a stainless steel body version. This product shares the technical features of the GRP bodied range but provides increased mechanical protection for the toughest of environmental conditions.

The durability of the stainless steel Protecta is ensured due to its construction from high grade stainless steel and a polycarbonate diffuser. The product is intended for applications where a risk of mechanical damage or exposure to chemical agents exist.

The enclosure also affords the high degree of ingress protection (IP66) required for use in Zone 1 and Zone 21 hazardous areas. The design  provides ease of access to lamps and control gear ensuring that installation and maintenance will be completed quickly and efficiently.

 

GOST R, CSA Approved 

IECEx Compliant

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

 

 

 

 

 

CAT REF.

PRSE/218/BI

PRSE/218/BI/EM

PRSE/236/BI

PRSE/236/BI/EM

PRSE/218/MO

PRSE/218/MO/EM

PRSE/236/MO

PRSE/236/MO/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO4-0005

SPRO4-0021

SPRO4-0033

 

 

Technical Data(Datasheet)

Protecta_III_SS.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Protecta III Luminaire 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Protecta III Luminaire 제품에 대해 살펴보도록 하겠습니다.

 

Chalmit Lighting

Fluorescent

Protecta III Luminaire

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

 

 

 

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas The rugged Protecta combines high quality and low maintance. It is constructed of a glass reinforced polyester (GRP) body and a polycarbonate diffuser to resist highly saline and other harsh, corrosive environments.

Major features of the luminaire are the strength of the enclosure and mounting points together wih the very high degree of ingress protection afforded by the simple reliable construction.
 
All the control gear is mounted on a gear tray. This ease of access to lamps and control gear ensures that installation and maintenance will be completed quickly and efficiently.

 

GOST R, CSA & CEPEL Approved

ATEX and IECEx Compliant

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

 

 

 

CAT REF.

PRGE/218/BI

PRGE/218/BI/EM

PRGE/218/MO/EM

PRGE/218/MO

PRGE/236/BI

PRGE/236/BI/EM

PRGE/236/MO/EM

PRGE/236/MO
NPRO4-0007

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

SPROT-0033

 

 

Technical Data(Datasheet)

ProtectaExe.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Nevis LED Bulkhead 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 방폭위험지역 Zone1에 적용되는 샬밋 Bulkhead가운데 Chalmit Nevis LED Bulkhead에 대해 알아보도록 하겠습니다.

 

 

Chalmit Lighting

샬밋

Nevis LED Bulkhead
Explosionproof

Ex d e Luminaire
ATEX CATEGORY 2

The Nevis LED bulkhead is an ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications.  The ultra bright LEDs will deliver an instant white light which has a longer life with light output & efficiency equivalent to a 70W HPS, making this a very cost effective luminaire.

 

The Nevis LED has these key benefits:
·          Long Operational Lifespan = 60,000 hours
·          Reduced Power Consumption = Cost effective
·          Operational at Low Temperatures -55°C

 

 

 

 

The Nevis has a side mounted increased safety terminal chamber, this eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

 

Designed for low profile applications, the bulkhead can be mounted on walls, handrails and ceilings - ideal for walkways or restricted height areas making the Nevis suitable for extreme environmental conditions.

 

 

 

 

Technical Data (Datasheet)

NevisLED.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Nevis Bulkhead 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋의 방폭조명가운데 위험지역 Zone1에 사용되는 Chalmit  Nevis Bulkhead 사양에 대해 살펴보도록 하겠습니다.

CHALMIT LIGHTING

Bulkhead

Nevis Bulkhead

Ex d e Luminaire

ATEX CATEGORY 2

 

 

 

The Nevis bulkhead is designed for applications where a low profile robust luminaire is required. It is suitable for mounting on handrails and walls as well as ceilings and in restricted dirty places.

The ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings. It has an IP66/67 rating making it ideally suited to use in hazardous area environments

The luminaire is suitable for high pressure discharge lamps up to 70W HPS and 125W mercury vapour and also compact fluorescent lamps up to 26W, 200W GLS and 55W QL induction lamps. These give an efficient all around light distribution.

The large side mounted increased safety terminal chamber eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

 

ATEX Certified

GOST R Approved

Brackets available for handrail mounting

 

 

 

 

Technical Data (Datasheet)

Nevis.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅  Solas Energency LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋라이팅의 방폭형 Floodlight 시리즈가운데 Zone 1에 해당하는 Chalmit Solas Energency LED Floodlight 사양에 대하여 살펴보겠습니다.

 

Chalmit Lighting

Solas Emergency LED Floodlight
Ex d e Luminaire
ATEX CATEGORY 2
The solas floodlight is the replacement for the 261E floodlight. The luminaire has been based on the same cast body but has been vastly improved with the use of LEDs, making the fitting a flexible floodlight solution for most emergency applications.

 

 

 

Chalmit Lighting

Solas Emergency LED Floodlight

 

 
SOLAS is a new generation of LED luminaire. Using ultra bright LEDs, it produces a whiter more focused light that an equivalent 70W HPS lamp. Available with a self contained battery, it can also be used for backup emergency lighting.

The long life of the LEDs makes it possible to use the luminaire continuously in normal operation (maintained), whilst still ensuring illumination in the event of a power failure. Alternatively it can simply be used as an emergency luminaire (non-maintained).

The unique characteristics of the SOLAS offer a flexible luminaire that is as well suited to providing focused area lighting, illuminating safety critical areas in an emergency situation. A remote inhibition facility is available on all emergency versions.

The range is available with options for operation down to -55°C making it ideal for low temperature applications.
 
  • ATEX and IECEx Compliant
  • GOST Certified
  •    

     

     

     

     

    Technical Data (Datasheet)

    Solas_Zone1.pdf

     

    Notice : Specification are subject to change without notice.

    주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

     

     

     

     

    국내 기술지원 및 구매상담

    CUSTOMER SUCCESS IDK

    CS CENTER 010.5353.9110

    deric@jadongwha.com

    www.tiatip.com

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Chalmit Lighting, Hazardous Area Lighting Product CAT

     

    안녕하세요 TIATIP 입니다. 오늘 이 시간에는 허벨 Hubbell 그룹의 브랜드 가운데 방폭위험지역 및 일반산업현장에 적용가능한 산업조명(Lighting) 전문인 Chalmit Lighting 제품군을 살펴보겠습니다.

     

      

     

     

    Chalmit Lighting, formerly known as Andrew Chalmers and Mitchell was formed in 1910 as a supplier of marine equipment to shipyards in the west of Scotland.
    Today the company is one of the largest and most respected hazardous area and marine lighting companies in the world and supplies product internationally through sales offices and agents located in over 40 countries.

     

     

     


    As part of the Hubbell Electrical Products division, Chalmit can offer a global range of IEC & NEC products suitable for hazardous area lighting and apparatus installations on any continent and complying with all international codes and standards.

     

     

     

     

    In addition to hazardous area luminaires, Chalmit Lighting has in-house facilities for the design and manufacture of fluorescent and HID control gear. This capability provides Chalmit with the ability to create ballasts tailored to meet the specific requirements of individual luminaires. These bespoke design services are also available to our customers upon request.

     

     

     

     

    Chalmit Products for ATEX Category 2 and Zone 1 Applications
    Chalmit, Protecta III Key Features
    Chalmit, Protecta III Ex e Fluorescent
    Chalmit, Protecta III E Ex e Emergency Fluorescent
    Chalmit, Protecta III Stainless Ex e Fluorescent
    Chalmit, Protecta III Mounting Options
    Chalmit, Acclaim III Ex e Recessible
    Chalmit, Curie Elite Fluorescent Ex e Recessible
    Chalmit, Lomond Fluorescent Ex d
    Chalmit, Evolution II Key Features
    Chalmit, Evolution II Ex de Asymmetric Floodlight
    Chalmit, Evolution Ex de Floodlight and Pendant
    Chalmit, Evolution Ex de Junior Floodlight
    Chalmit, Evolution Servicing & Mounting Accessories
    Chalmit, Nevis Ex de Bulkhead
    Chalmit, 216 Ex de Well-glass
    Chalmit, 238 Ex de Well-glass
    Chalmit, 261 Ex de Well-glass
    Chalmit, 261E and 723 Emergency Projector
    Chalmit, Laserlite Ex op
    Chalmit, Nexled Ex de LED Bulkhead Luminaire
    Chalmit, Nexled Emergency LED Bulkhead Luminaire
    Chalmit, Universal Control Box


     

     

     

    Chalmit, Products for ATEX Category 3 and Zone 2 Applications
    Chalmit, Sterling II Ex n Fluorescent
    Chalmit, Sterling II E Ex n Emergency Fluorescent
    Chalmit, Sterling Stainless Ex n Fluorescent
    Chalmit, Sterling E Stainless Ex n Emergency Fluorescent
    Chalmit, Protecta Ex n Fluorescent
    Chalmit, 800 Series Ex n Floodlight
    Chalmit, Micronex and Maxinex Ex n Floodlights
    Chalmit, Nexxus Ex n Bulkhead
    Chalmit, Eclipse Junior Ex n Well-glass
    Chalmit, Eclipse II Ex n Well-Glass
    Chalmit, Eclipse Mounting Variations & Accessories
    Chalmit, Pyramid Ex n Low and Medium bay
    Chalmit, 503 Ex n Floodlight
    Chalmit, 502 Ex n Control Gear Box
    Chalmit, 469 Ex N Floodlight

     

     

     

    Chalmit, Dust Protected Luminaires
    Chalmit, Ordering Information
    Chalmit, Lamps Available from Chalmit
    Chalmit, Lamp Types to use with Chalmit Luminaires
    Chalmit, Chalmit for Killark Range
    Chalmit, Lighting Design - ChalmliteTM

     

     

     

     

     

    Technical Data

    Chalmit Lighting - Hazardous Area Lighting Product Guide.pdf

    Chalmit Lighting - Industrial Area Lighting Product Guide_2005.p

     

    Notice : Specification are subject to change without notice.

    주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

     

     

    Chalmit, Chalmit Lighting

    샬밋, 샬미트, 샬밋라이팅, 샬미트라이팅

    셜밋, 셜미트, 셜밋라이팅, 셜미트라이팅

    찰밋, 찰미트, 찰밋라이팅, 찰미트라이팅

      

     

     

     

      

    국내 기술지원 및 구매상담

    CUSTOMER SUCCESS IDK

    CS CENTER 010.5353.9110

    deric@jadongwha.com

    www.tiatip.com

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    by TIATIP

    카테고리

    TI Story (947)
    TIA (92)
    TIP (194)
    TIEx (591)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)