HAWKE 383 Earth Lead Adaptor (Male to Female)

 

안녕하세요 TIATIP 입니다.

 

호크 케이블글랜드 관련 악세서리 가운데 Adapter and Reducer 제품군의 Type 383 Earth Lead Adapter를 살펴보겠습니다.

 

 

 Provides a means of attachment between dissimilar thread types or thread sizes.

 

 

Certification Details

Increased Safety Exe IIC Gb, Extb IIIC Db,  II 2GD.
Baseefa Certificate No. Baseefa11ATEX0152X.
IECEx Certificate No. IECEx BAS 11.0074X.
GOST R Certified.
Operating Temperature Range -60°C to +80°C.
Group II and III.

 

General Information

Manufactured in Brass, Nickel Plated Brass and Stainless Steel.
PVC Insulated Cable as standard, (Optional LSOH cable).
M20 to M75 as standard, other thread forms available on request.
Different thread sizes and types are permitted each end of the adaptor. These thread sizes may differ by one size only.
If longer cable lengths than standard are required, advise length in millimeters.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31.
Ingress Protection: IP66.

 

Hawke Thread Conversion Solutions for Cable Gland and Junction Boxes

Hawke Accessories for Cable Gland and Junction Boxes

 

 

Hawke 호크 Earth lead 383 01.pdf

Hawke 호크 383 조립도 01.pdf

05_Hawke 383 IDK.pdf

00.Hawke 호크 Accessories Old.pdf

00_Hawke 호크 Accessories New.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Ex Accessories, Adapters and Reducers Type 476 Series

 

안녕하세요 TIATIP 입니다.

 

오늘은 방폭케이블글랜드 및 산업용케이블글랜드와의 조합으로 사용되는 호크 악세서리가운데 476 Adapter, 476 Reducer 를 살펴보겠습니다.

 

 

 

 

Adapters And Reducers

Provides a means of attachment between dissimilar thread types or thread sizes

 

 

Certification Details

Increased Safety and Flameproof Exe IMb, Exd IMb, Exe IIC Gb, Exd IIC Gb, Extb IIIC Db,  IM2 / II 2GD.
Baseefa Certificate No. Baseefa11ATEX0067X.
IECEx Certificate No. IECEx BAS 11.0037X.
GOST R certified.
Operating Temperature Range -60°C to +200°C.
Group I, II and III.

 

General Information

Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel. (Aluminium for Group II use only).
M12 to M130 (3/8" NPT to 6" NPT) as standard.
Other thread options available on request, including BSPP, BSPTr, PG, ET, NPT and NPSM.
Up to two step thread sizes above the male thread on the adaptor is permitted.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31.
Ingress Protection: IP66.

 

For thread options/combinations please refer to the adaptors and reducers pdf data sheet. 

Hawke Accessories for Cable Glands

 

 

 

Hawke Thread Conversion Solutions for Cable Glands

 

 

 

Hawke 호크 Adapter Reducer 476 01.pdf

Hawke 호크 Adapter Reducer 476 조립도 01.pdf

09_Hawke 476 IDK.pdf

00.Hawke 호크 Accessories Old.pdf

00_Hawke 호크 Accessories New.pdf

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 653/Universal Cable Gland (Group 1 Mining)

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke Mining Cable Gland Type 가운데 653 Universal 시리즈를 살펴보겠습니다.

 

 

 

 

Application

Mining.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with :-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit ‘cold flow’ characteristics.
c) Enclosures containing an ignition source.

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for W, X & Z armour/braid types.
Provides a cable retention seal and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

Materials & Finishes

The 653/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel.
Brass NPT entries are nickel plated as standard.

 

Technical Data

Exd I Mb, Exe I Mb
Baseefa Certificate No. Baseefa08ATEX0329X.
IECEx Certificate No. IECEx BAS 08.0115X.
Suitable for use in Mines.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529.
Operating Temperature Range -60°C to +80°C.

Hawke Accessories for Cable Glands

 

 

 

Hawke Thread Conversion Solutions for Cable Glands

 

 

 

  • Cable Gland Accessories
  • Assembly Instructions adobe pdf logo
  • Cable Gland Data Sheet adobe pdf logo
  •  

     

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke 501/421/R Cable Gland  (0) 2013.05.30
    Hawke 321/R Cable Gland  (0) 2013.05.30
    Hawke 653/Universal Cable Gland (Group 1 Mining)  (0) 2013.05.30
    Hawke 653/T Cable Gland (Group 1 Mining)  (0) 2013.05.30
    Hawke 623 Cable Gland (Group 1 Mining)  (0) 2013.05.30
    Hawke 453/Universal Cable Gland  (0) 2013.05.30
    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 153/Universal Cable Gland

     

    안녕하세요 TIATIP 입니다.

    오늘은 Hawke Industrial Cable Glands Type 가운데 153/UNIVERSAL 타입을 살펴보겠습니다.

     

     

     

     

    Application

    Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour 'Y' and steel tape armour ‘ Z’ elastomer and plastic insulated cables.
    For particular use with cables that exhibit ‘cold flow’ characteristics.

     

    Features

    Provides armour clamping using one clamping arrangement for all armour/braid types.
    Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘cold flow’ characteristics.
    Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
    Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

     

    Materials & Finishes

    The 153/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

    Technical Data

    Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type E1W, E1X, E1Y and E1Z.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529.
    Deluge Protection to DTS01.
    Operating Temperature Range: -60°C to +80°C.

     

     


     

     

    Hawke Accessories for Cable Glands

     

    Hawke Thread Conversion Solutions for Cable Glands

     

     

  • Cable Gland Accessories
  • Assembly Instructions (Sizes Os to F) adobe pdf logo
  • Assembly Instructions (Sizes G to J) adobe pdf logo
  • Cable Gland Data Sheet adobe pdf logo
  •  

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke 453/T Cable Gland (Group 1 Mining)  (0) 2013.05.30
    Hawke 453/RAC Cable Gland (Group 1 Mining)  (0) 2013.05.30
    Hawke 153/Universal Cable Gland  (0) 2013.05.30
    Hawke 153/RAC/L Cable Gland  (0) 2013.05.30
    Hawke 151/RAC Cable Gland  (0) 2013.05.30
    Hawke 150/RAC Cable Gland  (0) 2013.05.30
    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 153/RAC/L Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke Industrial Cable Glands Type 가운데 153RAC/L 사양을 살펴봅니다.

     

     

     

     

     

    Application

    Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour 'Y' and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.

     

     

     

     

    Features

    Provides armour clamping using one clamping arrangement for all armour/braid types.
    Provides a seal and an electrical bond on the cables lead inner sheath.
    Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

     

     

     

     

    Materials & Finishes

    The 153/RAC/L cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

     

     

     

    Technical Data

    Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type E2W, E2X, E2Y and E2Z.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
    Deluge protection to DTS01 (Deluge seal optional).
    Operating Temperature Range: -60°C to +80°C.

     

    Hawke Accessories for Cable Glands

     

     

    Hawke Thread Conversio for Cable Glands

     

     

  • Cable Gland Accessories
  • Assembly Instructions adobe pdf logo
  • Additional assembly instructions for lead sheathed cables
  • Cable Gland Data Sheet adobe pdf logo
  •  

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke 453/RAC Cable Gland (Group 1 Mining)  (0) 2013.05.30
    Hawke 153/Universal Cable Gland  (0) 2013.05.30
    Hawke 153/RAC/L Cable Gland  (0) 2013.05.30
    Hawke 151/RAC Cable Gland  (0) 2013.05.30
    Hawke 150/RAC Cable Gland  (0) 2013.05.30
    Hawke 123 Cable Gland  (0) 2013.05.30
    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 151/RAC Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘 이시간에는 Hawke (호크) Industrial Cable Glands Type 151RAC Cable Gland에 대해 살펴보겠습니다.

     

     

    HAWKE 151/RAC

     

     

    Application

    Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour 'Y' and steel tape armour ‘Z’ elastomer and plastic insulated cables.

     

     

     

     

    Features

    Provides armour clamping using one clamping arrangement for all armour/braid types.
    Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

     

     

    Materials & Finishes

    The 151/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

     

     

     

    Technical Data

    Construction and test standards: EN 50262, BS 6121 : Part 1 Type CW, CX, CY and CZ.
    Ingress Protection: IP66 to IEC/EN 60529.
    Deluge protection to DTS01. (Deluge seal optional).
    Operating Temperature Range: -60°C to +100°C.

     

     

     

    HAWKE Accessories for Cable Glands

     

     

    HAWKE Thread Conversion Solutions for Cable Glands

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke 153/Universal Cable Gland  (0) 2013.05.30
    Hawke 153/RAC/L Cable Gland  (0) 2013.05.30
    Hawke 151/RAC Cable Gland  (0) 2013.05.30
    Hawke 150/RAC Cable Gland  (0) 2013.05.30
    Hawke 123 Cable Gland  (0) 2013.05.30
    Hawke 114 Cable Gland  (0) 2013.05.30
    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

    카테고리

    TI Story (959)
    TIA (92)
    TIP (194)
    TIEx (603)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)