호크 Hawke Group ⅠMining Cable Glands 라인업 소개

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke 의 Group ⅠMining 관련 케이블글랜드 라인업을 살펴보겠습니다.

 

 

 

 

Hawke

Cable Gland for Mining Applications

 

Group I Mining Cable Glands

 

Cable glands for mining applications are designed to withstand much harsher operating conditions than equipment used in surface applications. Higher resistance to impacts and higher cable pull out test requirements have to be met to ensure that the products will provide secure cable retention, impact resistance, explosion protection and a reliable earth connection when used in mining applications.

 

 

1. 453/RAC Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

2. 453/T Series

 

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

3. 453/Universal Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

4. 623 Series

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

 

5. 653/T Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

 

6. 653/Universal Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크  Hawke 453/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke Group I Mining 애플리케이션 Cable Glands 가운데, 453/Universal Cable Gland에 대해 살펴보도록 하겠습니다.

 

 

Hawke

Group I Mining 

453/Universal Cable Gland

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

Application

 

Mining.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit "COLD FLOW" characteristics.

 

 

 

 

Features

 

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has "cold flow" characteristics.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 


 

Materials & Finishes

 

The 453/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.

 

 

 

 

 

Technical Data

 

1. Flameproof Exd and Increased Safety Exe ex logo IM2

2. Certificate No's Baseefa08ATEX0330X and IECEx BAS 08.0014X.

3. Suitable for use in: Mines.

4. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1

    and IEC/EN 60079-7.

5. Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days)

   to IEC/EN 60529.

6. Operating Temperature Range: -60°C to +80°C

7. Assembly Instruction Sheet: AI 371.

 

Hawke Group I Mining

453/Universal Cable Gland

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

Features Of The Universal Cable Gland

 

 

 

 

1. Unique Rear Sealing System

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection.

The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

2. The Original Reversible Armour Clamp

The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accommodate all types of cable armour or braid. Unlike many of our competitors, the correct stamping orientation is marked clearly with the armour size and backed up by the presence of a groove in the component. Our RAC clamping system is also fully inspectable when positioned on the cable.

 

3. Zero Cable Damage

Our unique diaphragm sealing system does not damage cables which exhibit 'Cold Flow' characteristics. The diaphragm type seal is currently the only elastomeric seal to comply fully with IEC/EN 60079-14 and is therefore suitable on effectively filled 'cold flow' cables which would otherwise require barrier style cable glands. Our diaphragm seal is also unique in that it is the only flameproof elastomeric seal that can be visually inspected in operation - a real benefit to inspectors.

 

4. Inspectable Deluge Seal

Our inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01. Indeed, our deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which prevents corrosion of the cable armour.

 

 

 


 

 

Hawke Ordering Format [Gland Type/Size/Thread/Options]

 

Example without options : 453/UNIV/C/M32

Example with alternative clamping ring options : 453/UNIV/C/1-14/"NPT/AR

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (949)
TIA (92)
TIP (194)
TIEx (593)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)