Panasonic, Lamp Spot Type, UV Curing System, Aicure UP50
안녕하세요 TIATIP 입니다.
오늘은 Panasonic의 UV경화기 가운데 LAMP 타입으로서는 가장 최신의 모델이며, 그 성능과 안정성을 자랑하는 UP50을 살펴봅니다. UP50은 MUV5204 및 ANUP5204의 진화된 사양이자 경화시스템과 관련하여 램프타입이 갖추어야할 모든 솔루션을 포함하고 있는 Compact 타입의 UV LAMP경화기입니다.
기존의 MUV5204, ANUP5204에서 제공하지 않았던 기능이 추가되었는데요, 바로 UV센싱인터페이스 기능입니다. UV센서를 옵션으로 선택하시면 보다 안정적인 생산라인 운영이 가능합니다. UP50에 장착하는 UV LAMP는 지난 10년간 안정성입 입증된
ANUPS204 모델이며, 구형의 MUV5204, ANUP5204와 공용이 가능한 사양입니다.

UP50 (ANUP50)
Featuring an energy-efficient mode, which cuts the power consumption by a maximum of 15% while the irradiation is off, and a high-accuracy auto-tuning function
1. High-efficiency UV irradiation
Eco mode reduces power consumption
The Eco mode cuts the standby power consumption by a maximum of 15% while the irradiation is off (the shutter is closed), contributing to the running costs (electricity charge). Compatible with a wide range of power supply voltages from 100 to 240 V AC for worldwide use.
Surface tackiness can be quickly eliminated
The development and adoption of our unique special mirror that allows for the
effective irradiation with short wavelengths enables the quick elimination of
surface stickiness caused during curing. The irradiation time can also be
reduced, decreasing the temperature rise of workpieces.
ANUP5001F heat ray cut filter prevents temperature rises in the irradiation unit.
The use of the filter is recommended especially for heat-sensitive workpieces.
You can reduce temperature rises in the irradiation unit by attaching a heat
reflecting filter depending on the type of workpiece.
2. Stable UV irradiation performance
UV auto control function automatically compensates for the UV intensity.
This function increases the electrical power applied to the lamp according to
the total irradiation time of the lamp to compensate for the UV intensity decrease, maintaining stable UV irradiation until the end of the lamp life.
Slim UV sensor (optional)
Significantly higher reliability for bonding and fixing. The UV sensor for measuring irradiation intensity enables auto-turning in high-accuracy.
The UV intensity can be relative measured* at the actual position by using the slim UV sensor. It can also automatically adjust the UV intensity to the preset level. Since the sensor only has 5 mm (0.2 in) thickness, which is similar to the workpiece, the intensity measurement is possible without removing the system from the production line, facilitating high-accuracy setting and in-line condition optimization. The UV intensity can be checked and adjusted at real time, enhancing the bonding and fixing reliability.
3. Stable UV irradiation performance
Programmable irradiation function
This function prevents curing distortion and enables high-quality precision bonding. The irradiation can be programmed to controls the irradiation power and time depending on the resin and curing appication, supporting high-quality and high-precision bonding with minimum cure shrinkage. In addition to the simple irradiation mode which irradiation is continuously performed at a constant intensity, up to 10 steps 10 patterns can be set. This includes the step-up mode which the intensity is changed over time and the interval mode which irradiation is performed at specified intervals.
Digital setting allows for consistency of set values from operator to operator.
The irradiation power can be finely set in the range of 0 to 100% in increments of 0.5%. The actual UV irradiation intensity is approximately proportional to the displayed value, making the setting work easier and more accurate.
Interchangeability with ANUP5204
The wavelength distribution (typical characteristics) of UP50 is identical to
ANUP5204, our existing model. The replacement lamp, the ANUPS204, is
also the same as that for the ANUP5204.
4. Easy to install
Can be placed either vertically or horizontally.
The unit can be placed in either a vertical position that makes the footprint smaller or a horizontal position that allows stacking other units.
Long life, quickly-attachable lamp, ANUPS204
The average lamp life is 3,000 hours(guaranteed life: 2,000 hours*). The lamp can be easily replaced with a single operation and does not require an optical axis adjustment. * Ratio to the initial UV intensity -- 80% or higher in vertical placement, 70% or higher in horizontal placement
Two lens unit models for short and long range converging
The two lens unit models, one for short range and the other for long range
converging, cover a variety of applications and work pieces.
Aicure UP50 Controller

Panasonic 파나소닉 경화기 UP50 EN 01.pdf
국내 기술지원 및 구매상담처
CUSTOMER SUCCESS IDK
deric@jadongwha.com
www.tiatip.com