'Cable Gland'에 해당되는 글 52건

  1. 2017.04.23 Schlemmer 슐레마의 Flat Cable 설치작업 맞춤용 Flat Sealing Glands 소개자료
  2. 2016.04.23 Punch Tools for SB474 and PSG553RAC Cable Glands 소개자료
  3. 2014.06.18 Hawke Cable Gland 321/R Series 기술사양 소개 (UPD20140611)
  4. 2014.06.18 Hawke Cable Gland 321 Series 기술사양 소개 (UPD20140611)
  5. 2014.04.11 호크 Hawke Group ⅠMining Cable Glands 라인업 소개
  6. 2014.04.11 호크 Hawke 653/Universal Cable Gland 기술사양
  7. 2014.04.11 호크 Hawke 653/T Cable Gland 기술사양
  8. 2014.04.11 호크 Hawke 457/T Cable Gland 기술사양
  9. 2014.04.11 호크 Hawke 453/RAC Cable Gland 기술사양
  10. 2014.03.25 호크 Hawke 713 Cable Gland/Connector 기술사양
  11. 2014.03.25 호크 Hawke 710 Cable Gland/Connector 기술사양
  12. 2014.03.24 호크 Hawke 150/RAC Cable Gland 기술사양
  13. 2014.03.24 호크 Hawke 151/RAC Cable Gland 기술사양
  14. 2014.03.24 호크 Hawke 153/Universal Cable Gland 기술사양
  15. 2014.03.24 호크 Hawke 114 Cable Gland 기술사양
  16. 2014.03.24 호크 Hawke CSB 656N Cable Gland 기술사양
  17. 2014.03.24 호크 Hawke SB 474 Cable Gland 기술사양
  18. 2014.03.24 호크 Hawke PSG 553/RAC Cable Gland 기술사양
  19. 2014.03.24 호크 Hawke 501/453/RAC/L Cable Gland 기술사양
  20. 2014.03.19 호크 Hawke 121 Cable Gland 기술사양
  21. 2014.03.17 호크 Hawke 501/414 Cable Gland 기술사양
  22. 2014.03.17 호크 Hawke 501/421 Cable Gland 기술사양
  23. 2014.03.17 호크 Hawke 501/453/Universal Cable Gland 기술사양
  24. 2014.01.14 Hawke 호크 ICG653Universa Pl/ICG653UNIV P타입 기술사양
  25. 2013.07.26 OSCG, Ex Type, Packing Type Cable Gland, OSXP-M
  26. 2013.07.26 OSCG, Ex Type, Packing Type Cable Gland, OSXP-F(OSXPF)
  27. 2013.07.26 OSCG, Ex Type, Cable Glands, OSNJ-A2FD
  28. 2013.07.26 OSCG, Ex Type, Cable Glands, OSNJ-A2F
  29. 2013.07.26 OSCG, Ex Type, Cable Glands, E1XF
  30. 2013.07.26 OSCG, Ex Type, Cable Glands, E1WF/LS

Schlemmer 슐레마 Flat Cable 설치작업 맞춤용 Flat Sealing Glands 소개자료

 

안녕하세요 TIATIP 입니다. 나라 안팎으로 복합하고 다양한 이슈로 인해 어수선한 분위기입니다만, 항상 희망을 찾고 용기를 갖는 여러분이 되셨으면 좋겠습니다. 여러분의 건강과 노력을 항상 응원하겠습니다.

 

 

 

오늘 이 시간에는 최근 육상플랜트 및 해양플랜트의 산업환경에 위치한 프로세스 배관(Pipe)과 탱크(Storage Tank), 밸브(Valve) 등으로부터, 외부로 방출되는 열손실을 보완하여 유체의 온도를 일정하게 유지하거나, 유량계(Flowmeter), 트랜스미터(Transmitter) 등의 필드계기 및 제어장치들의 동파방지 및 히팅, 스노우멜팅(Snow melting), 아이스 스탑(ice stop) 기능 등으로 활용되고 있는 히팅케이블(Heating Cables) 및 히트트레이싱 시스템(Heat Tracing System) 과 관련하여, 각종 필드계기(Field Instrument) 및 Control Panel, Junction Box, Enclosure 에 연결시, 케이블엔트리(Cable Entry)에 적합한 케이블글랜드(Cable Gland) 를 소개드리고자 합니다.

 

 

 

새롭게 개정된 IEC 60079-14 의 Clause 10.2 Selection of Cable Glands 규칙에서는 "They shall be circular and compact " 사양을 제안하고 있어, 정원(circular type)이 아닌 케이블을 열수축튜브나 테이핑등을 이용하여 임의적으로 가공 또는 조작하여 사용할 수 없다는 경고를 하고 있습니다. 

The cable gland shall be selected to match the cable diameter.

The use of sealing tape, heat shrink tube or other materials is not permitted to make the cable fit to the cable gland.

 

따라서, 이 같은 경우 정원이 아닌 히팅케이블 및 히팅트레이싱케이블의 넓적한 형태의 케이블  즉, Flat Cable 의 경우, 내부 Compression 부에 적합한 Flat Sealing 이 적용되어야 하며, 이에 검토 가능한 Vendor, 슐레마 Schlemmer 를 소개드리고자 합니다.

 

 

 

하기는 Raychem,  Thermon 등의 메이커에서 공급되는 Flat Type의 Cable 이미지 입니다.

 

           

                 

 

보시는 바와 같이 기존의 케이블 연결방식과는 다른 대안이 필요합니다. 따라서 하기의 자료를 검토용으로 포스팅해보도록 하겠습니다.

 

 

여러분의 산업현장에서 요구되는 애플리케이션과 방폭사양 및 전기사양 및 온도특성등은 첨부의 카탈로그를 참조해주시기 바랍니다.

 

 

 

슐레마 Schlemmer, Cable gland for Flat cable Sealing,  ATEX Ex e, WADI-TEC

Material : Polymide, PVDF, Nickel Plated Brass, Stainless Steel 316L

Thread : Metric, NPT, PG

Length of body : Short & Long body type

 

 

Technical Data

Schlemmer, 슐레마, WADI-TEC, WADITEC, Flat Sealing, Flat Cable Gland, Cable Gland, Polyflex, Poly-Flex, Semfast, SEM-Fast

3.4 ATEX Glands with Accessories.pdf

3.0 Connection All.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 취급점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Punch Tools for SB474 and PSG553RAC Cable Glands 소개자료

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 최근 Compound Barrier 구성의 케이블글랜드 니즈와 관련하여, 사용자편의성 및 안전을 고려한 Sealing 타입이 각광을 받고 있어, 새롭게 포스팅을 하게 되었습니다.

 

HAWKE INTERNATIONAL

Cable Galnds & Tools

Punch Tool

SB474 Cable Glands, PSG553RAC Cable Glands

 

현장으로부터의 경화시간의 단축, 편리한 체결구성, 깔끔하고 컴팩트한 구성 및 화학물질에 대한 안전등 전반적인 편의성과 공수절감등이 요구되는 조건에 최적의 솔루션으로 주목받고 있습니다. 

 

기존의 고형타입 또는 액상타입의 컴파운트(Compound)/퍼티(Putty)를 사용하지 않는 대신 케이블의 각 Core Size별로 오렌지색의 Seal을 타공하여 현장에서 즉시 사용할 수 있습니다.

 

HAWKE PUTTY (Compound for ICG653UNIV Series &., )

 

HAWKE PUTTY (Epoxy Compound Seal for ICG653UNIV Series &., )

 

 

 

HAWKE Barrier Seal for SB474 Series & PSG553/RAC Series

 

 

Punch Tools의 개봉이미지를 소개드리며, 기타 상세한 사항은 첨부의 자료를 참고하여주시기 바랍니다.

 

1. 먼저 Punch Tool 포장구성입니다. (No.1, No2 & No.3 종합구성의 제품기준)

 

 포장패키지를 열면, 하기와 같이 Punch Tools No.1, No.2, No.3 과 함께,

고정용 Stand 및 Orange 색상의 Barrier Seal 1개로 구성이 되어 있습니다.

 

위에서 내려본 내구구성품의 이미지입니다.

 

가까지 접근해서 본 이미지 구성입니다.

 

2. Punch Tools의 각 호수별(No.1, No.2, No.3) 별 Punch Hole의 사이즈가 다르게 구성되어 있음을 확인하실 수 있습니다.

 

각 툴의 끝단은 날카로우므로 보관 및 사용 또는 작업시 다치지 않도록 주의하시기 바라며, Barrier Seal 에만 적용되도록 가공된 Tools 이므로 다른 제품에 적용하지 않도록 하시기 바랍니다. 보관하실 때에는 안전처리를 기본적으로 해주시기 바랍니다. 

 

각각의 Punch Tools 들은 빨강색의 핸들부 상단에 No.1, No.2, No.3 라고 표기가 되어 있습니다.  

 

각각의 Punch Tools 들은 하기와 같이 측면에도 음각으로 No.1, No.2, No.3 라고 표기가 되어 있습니다.  사용하실 때 반드시 주의하여 확인후 작업을 진행해주시기 바랍니다. 

 

 

3. Cable Gland Size for Conductor 데이터입니다.

Cores Cross Section Area (㎟) 별, 최대 Core의 수가 지정되어 있습니다.

 

4. Punch Tool Size Details 입니다.

No.1, No2. No3. 별 Core Cross Section Area(㎟) 범위를 참조하시기 바랍니다.

 

5. Orange색상의 Barrier Seal 의 전면, 후면 그리고 측면의 이미지 컷입니다.

Max. No. fo Cores 가 7이므로 적정한 타공관련 가이드가 양면에 표기되어 있습니다. 1~4 Core일경우, 5~7Core 일경우에 맞추어 적절하게 적용하면 되겠습니다.

 

하기의 이미지는 최대 7 Core용 단면입니다. 

 

Barrier Seal 의 측면 이미지입니다.

 

6. Punch Tools 의 고정 Stand 입니다.

 

Punch Tools Stand 안쪽의 모습니다.

 

 

7. Punch Tools 의 고정 Stand 바닥면의 붉은색 원판에 Barrier Seal을 올려놓고, 타공 방향을 정합니다.

 

Barrier Seal의 방향을 정하고 정해진 위치에 올려놓은 이미지 입니다.

 

Barrier Seal을 셋팅후 상부에서 내려다본 이미지 입니다.

 

 

8. Punch Tools 의 고정 Stand 바닥면의 붉은색 원판에 Barrier Seal을 올려놓고, 타공 방향을 정했으면, 적정 툴의 번호(No.1, No.2, No.3) 를 선정하고 Seal상의 가이드를 고려하여 위치별 타공을 하면 됩니다.

 

9. 각 조건셋팅이후 타공위치를 정확히 맞추어 Punch Tool의 헤드부를 눌러 수동으로 타공하게 됩니다. 

 

10. Barrier Seal 의 정 중앙에 1개를 타공한 사진입니다. 

 

 

11. Barrier Seal 을 사용하는 대표적인 케이블글랜드 SB474 Series 입니다. 

Barss (Standard) 재질의 사양이며, 측면의 이미지 입니다.

 

SB474 Cable Glands 을 분해하면 하기와 같이 크게 3가지 파트로 나누어 집니다.  체결용 유니온 후진된 모습입니다.

 

체결용 유니온을 임의 전진해 놓은 이미지 입니다.

 

SB474 세가지 구성에 대해 상부에서 내려다본 이미지 1 입니다.

 

SB474 세가지 구성에 대해 상부에서 내려다본 이미지 2 입니다.

 

SB474의 Female 측 장치 상부이미지 입니다.

 

SB474의 Female 측 장치에 Barrier Seal 이 놓인 이미지 입니다.

 

SB474 케이블글랜드에 케이블없이 Barrier Seal 을 체결하기 직전모습입니다.

 

SB474 케이블글랜드의 Male 측 기본 이미지 입니다.

 

SB474 케이블글랜드의 Female 측 기본 이미지입니다.

 

 

12. Barrier Seal 을 사용하는 대표적인 케이블글랜드 SB474 Series 와 Punch Tools 과의 조합구성입니다. 

 

 

 

13. Barrier Seal 을 사용하는 대표적인 케이블글랜드 PSG553RAC Series 입니다. 

이상으로 HAWKE SB474 및 PSG553RAC Series 에 사용되는 Barrier Seal 과, 케이블별 구성체결을 위한 전용 Punch Tools 에 대해 간단히 살펴보았습니다. 최근 Onshore, Offshore 의 다양한 애플리케이션에서 안전하고 신뢰할 수 있는 Harsh & Hazardous Solutions 이 요구되고 있으며, 많은 니즈와 함께 까다로운 사양이 많이 발생되고 있는 가운데, 여러분의 환경에서 현명한 선택의 폭이 하나 늘었으면 하는 바람입니다.

 

 

 

Technicla Data

HUBBELL, HAWKE, Cable Gland, Barrier Seal, Compound Barrier, Barrer Sealing, Putty, SB474, SB/474, PSG553RAC PSG/553/RAC, PSG553/RAC, ICG/653/UNIV, ICG653UNIV, ICG653/UNIV, ICG653/Universal

SB474 Spec 20141114.pdf

SB474 Assembly 201603XX R.pdf

SB474 Assembly Tool Manual.pdf

PSG553RAC Spec 20141114.pdf

PSG553RAC Assembly 201603XX Q.pdf

1.Cable Glands-Group ll.pdf

2.Hawke Accessories for Cable Gland TSC01 201201 IDK R1.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

  

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Cable Gland 321/R Series 기술사양 소개 (UPD20140611)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 06월 11일자로 업데이트된 호크 케이블글랜드 321/R 시리즈에 대한 사양에 대해 살펴보겠습니다.

 

 

 

 

HAWKE International

A Division of Hubbell Incorporated

Cable Glands

321/R Series

Hazardous Area

Increased Safety Exe

Class-Zones-Divisions

Certified ATEX/IECEx/cCSAus

 

 

 

 

Application
The 321/R cable gland provides a seal and cable clamp on the
outer cable sheath and is intended for use on non-armoured
elastomer and plastic insulated cables. The cable gland certifi ed
Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22)
hazardous areas.

 

 

 

 

Technical Data

 

ATEX/IECEx
- Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2 GD.
- Certifi cate No’s: Baseefa06ATEX0059X and IECEx BAS 06.0016X.
- Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22.
- Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31.
- Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
- Deluge Protection to DTS01.
- Operating Temperature Range: -60°C to +100°C.
- Assembly Instruction Sheet: AI 452.

 

cCSAus
- Increased Safety AExe IIC and Dust AExtD Zone 21.
- Explosion-proof Class 1 Division 2, Class II Division 2 Groups EFG, Class III.
- Certifi cate No’s: CSA1205533 for Marine Shipboard Cable.
- Construction and Test Standards: UL 60079-0, UL 60079-7, ISA 60079-31.
- CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31, UL 2225

 

 

 

 

Features
• When used in Increased Safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure. The braid must then be suitably terminated inside the enclosure.
Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079 series standards for Exe applications.

• Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.

• Brass NPT entries are nickel plated as standard.

• Cable clamp provides required clamp and cleat function

 

Ordering Information
Format for ordering is as follows:
Certifi cation required i.e. ATEX / IECEx
Material & Finish i.e. Brass Nickel Plated
Alternative Seal (S), add suffix S to ordering information.

 

Example

321/R/C/M32/S/Nickel Plated Brass ATEX Certified

 

 

 

 

 

 

321R IDK Spec 20130129.pdf

321R IDK Spec 20140611.pdf

1.Hawke Accessories 2012 IDK.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Cable Gland 321 Series 기술사양 소개 (UPD20140611)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 06월 11일자로 업데이트된 호크 케이블글랜드 321 시리즈에 대한 사양에 대해 살펴보겠습니다.

 

 

HAWKE International

A Division of Hubbell Incorporated

Cable Glands

321 Series

Hazardous Area

Increased Safety Exe

Class-Zones-Divisions

Certified ATEX/IECEx/cCSAus

 

 

Application
The 321 cable gland provides a seal on the outer cable sheath and is
intended for use on non-armoured elastomer and plastic insulated
cables. The cable gland certifi ed Exe and is suitable for installation in
Zone 1 (21) and Zone 2 (22) hazardous areas.

 

 

 

 

Technical Data

 

ATEX/IECEx
- Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2 GD.
- Certifi cate No’s: Baseefa06ATEX0059X and IECEx BAS 06.0016X.
- Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22.
- Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31.
- Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
- Deluge Protection to DTS01.
- Operating Temperature Range: -60°C to +100°C.
- Assembly Instruction Sheet: AI 451.

 

cCSAus
- Increased Safety AExe IIC and Dust AExtD Zone 21.
- Explosion-proof Class 1 Division 2, Class II Division 2 Groups EFG, Class III.
- Certifi cate No’s: CSA1205533 for Marine Shipboard Cable.
- Construction and Test Standards: UL 60079-0, UL 60079-7, ISA 60079-31.
- CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31, UL 2225

 

 

 

Features
• When used in Increased Safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure. The braid must then be suitably terminated inside the enclosure.
Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079 series standards for Exe applications.

• Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.

• Brass NPT entries are nickel plated as standard.

 

 

Ordering Information
Format for ordering is as follows:
Certifi cation required i.e. ATEX / IECEx
Material & Finish i.e. Brass Nickel Plated
Alternative Seal (S), add suffix S to ordering information.

 

Example

321/C/M32/S/Nickel Plated Brass ATEX Certified

 

 

 

 

321 IDK Spec 20140611.pdf

321 IDK Spec 20110609.pdf

2.Hawke Accessories 2013 IDK.pdf

1.Hawke Accessories 2012 IDK.pdf

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke Group ⅠMining Cable Glands 라인업 소개

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke 의 Group ⅠMining 관련 케이블글랜드 라인업을 살펴보겠습니다.

 

 

 

 

Hawke

Cable Gland for Mining Applications

 

Group I Mining Cable Glands

 

Cable glands for mining applications are designed to withstand much harsher operating conditions than equipment used in surface applications. Higher resistance to impacts and higher cable pull out test requirements have to be met to ensure that the products will provide secure cable retention, impact resistance, explosion protection and a reliable earth connection when used in mining applications.

 

 

1. 453/RAC Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

2. 453/T Series

 

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

3. 453/Universal Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

4. 623 Series

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

 

5. 653/T Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

 

6. 653/Universal Series

 

Exel Exdl
Armoured
ATEX IECEx Approved

 

 

 

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 653/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke Cable Glands 가운데 Group I, Mining 용인 653/Universal Cable Gland에 대해 살펴봅니다.

 

Hawke

Group I Mining

653/Universal Cable Gland

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

Application

 

Mining.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with :-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'cold flow' characteristics.
c) Enclosures containing an ignition source.

 

 

 

 

 

 

 

Materials & Finishes

 

The 653/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.

 

 

 

 

 

 

Technical Data

 

1. Exd I Mb, Exe I Mb

2. Certificate No's Baseefa08ATEX0329X and IECEx BAS 08.0115X.

3. Suitable for use in: Mines.

4. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7.

5. Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529.

6. Operating Temperature Range: -60°C to +80°C

7. Assembly Instruction Sheet: AI 301.

 

 

Hawke Ordering Format [Gland Type/Size/Thread/Options]

 

Example without options : 653/UNIV/C/M32

Example with alternative clamping ring option : 653/UNIV/C/1-1/4"NPT/AR

 

 

 

 

 

 

 

 

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 653/T Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke Cable Glands 가운데 Group I Mining 용 653/T Cable Glands 에 대해 살펴보도록 하겠습니다.

 

 

Hawke

Group I Mining

653/T Cable Gland

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

Application

 

Mining.
For use with pliable wire armoured cable.
For particular use with :-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'cold flow' characteristics.
c) Enclosures containing an ignition source.

 

 

 

 

 

Features

 

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, for pliable wire armour cable.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 


Materials & Finishes

The 653/T cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.

 

Technical Data

 

1. Flameproof Exd and Increased Safety Exe ex logo IM2

2. Certificate No's Baseefa08ATEX0329X and IECEx BAS 08.0115X.

3. Suitable for use in: Mines.

4. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1

    and IEC/EN 60079-7.

5. Ingress Protection: IP66, IP67 and IP68 (30 metres for7 days)

    to IEC/EN 60529.

6. Operating Temperature Range: -60°C to +80°C

7. Assembly Instruction Sheet: AI 346. 

 

 

 

 

Hawke Order Format [Gland Type/Size/Thread]

 

Example : 653/T/C/M32

 

 

 

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 457/T Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke Cable Gland 중에서 Group I, Mining Glands, 453/T Cable Gland를 살펴보겠습니다.

 

 

 

 

Hawke

Group I Mining

453/T Cable Gland

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

Application

 

Mining..
For use with pliable wire armoured cables.

 

 

 

 

Features

 

Provides armour clamping using one clamping arrangement.
Provides a seal on the cables inner sheath.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

Materials & Finishes

 

The 453/T cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.

 

 

 

 

 

Technical Data

 

1. Flameproof Exd and Increased Safety Exe ex logo IM2

2. Certificate No's Baseefa08ATEX0331X and IECEx BAS 08.0112X.

3. Suitable for use in: Mines.

4. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1

    and IEC/EN 60079-7.

5. Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days)

    to IEC/EN 60529.

6. Operating Temperature Range: -60°C to +80°C

7. Assembly Instruction Sheet: AI 381.

 

 

Hawke Ordering Format [Gland Type/Size/Thread/Options]

 

Example withtout options : 453/T/C/M32

Example with alternative seal options : 453/T/C/1-1/4"NPT/S

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 453/RAC Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Cable Glands 가운데, Group I Glands, 453/RAC Cable Gland 를 살펴보도록 하겠습니다.

 

 

 

Hawke

Group I Mining

Group I Glands

453/RAC Cable Gland

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx 

 

 

 

 

Application

 

Mining..
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

 

 

 

 

 

 

Features

 

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a seal on the cables inner sheath.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

Materials & Finishes

 

The 453/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.

 

 

Technical Data

1. Flameproof Exd and Increased Safety Exe ex logo IM2

2. Certificate No's Baseefa08ATEX0331X and IECEx BAS 08.0112X.

3. Suitable for use in: Mines.

4. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1

    and IEC/EN 60079-7.

5. Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days)

   to IEC/EN 60529.

6. Operating Temperature Range: -60°C to +80°C

7. Assembly Instruction Sheet: AI 383.

 

Hawke Ordering Format [Gland Type/Size/Thread/Options]

 

Example without options : 453/RAC/C/M32

Example with alternative seal options : 453/RAC/C/1-1/4"NPT/S

Example with alternative clamping ring options : 453/RAC/C/1-1/4"NPT/AR

 

 

 

 

 

 

1.Cable Glands-Group I Mining.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 713 Cable Gland/Connector 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke의 American Series 가운데, Class 1 Division 1, MCHL Armour, UL - ATEX Approved 의 713 Cable Gland/Connector 를 살펴보겠습니다.

 

 

 

 

Hawke

Cable Glands

713 Cable Gland/Connector

American Series

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

 

 

 

Features

Provides 360° armour grounding which is fully inspectable.
Grounding device remains in contact with the cable when disassembled for inspection.
Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland/connector compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured red to indicate hazardous locations product.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.

 

 

 

 

Materials & Finishes

The 713 cable gland/connector is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard. 

 

Technical Data

 

1.UL Listing No: E84940.

2.Suitable for use in: Class 1, Division 1, Gas Groups A, B , C and D.
Class 1, Zone 2, Gas Groups IIA, IIB and IIC.
AExd IIC and AExe II Class 1, Zone 2.

3.Flameproof Exd, Increased Safety Exe ex logo II2 GD and Restricted Breathing ExnR ex logo II 3G

4.Certificate No's Sira 06ATEX1295X and IECEx Sir 06.0082X.

5.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

6.Construction and Test Standards: UL 2225, IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.

7.Ingress Protection:
IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

8.Deluge Protection to: DTS01

9.Operating Temperature Range: -50°C to +60°C (UL) and -60°C to +80°C (ATEX / IECEx)

10.Note: 713 cable glands are supplied dual ATEX/UL marked as standard.

11.Assembly Instruction Sheet: AI 317 (UL, Sizes A to F). AI 338 (UL, Size H). AI 389 (ATEX / IECEx).

 

1.Cable Glands-American Series NEC,IEC.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

Installation Guide

Hawke

713 Cable Gland/Connector

 

 

 

 

 

 

 

  

Hawke Ordering Format

[Gland Type/Size/Thread]

 

Example : 713/C/1"NPT

 

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 710 Cable Gland/Connector 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke의 American Series 가운데 Class 1 Division 2, Non-armoured TC- ITC, UL, ATEX approved을 갖추고 있는 710 Cable Gland/Connector를 살펴보도록 하겠습니다.

 

 

 

Hawke

Cable Glands

710 Cable Gland/Connector

American Series

Explosion Proof / IECEx and ATEX Approved Flameproof Exd /

Increased Safety Exe and Restricted Breathing ExnR

 

 

 

 

 

 

Features

Provides a barrier seal between the individual insulated conductors within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland/connector compresses and distributes the compound evenly to effect a barrier seal at the point of entry into the enclosure.
Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is colored red to indicate hazardous locations product.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.

 

 

 

 

Materials & Finishes

The 710 cable gland/connector is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

 

 

Technical Data

 

1.UL Listing No: E84940.

2.Suitable for use in: Class 1, Division 2, Gas Groups A, B , C and D.
Class 1, Zone 2. Gas Groups IIA, IIB and IIC.
AExd IIC and AExe II Class 1, Zone 2.

3.Flameproof Exd, Increased Safety Exe ex logo II2 GD and Restricted Breathing ExnR ex logo II 3G

4.Certificate No's Sira 06ATEX1295X and IECEx Sir 06.0082X.

5.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

6.Construction and Test Standards: UL 2225, IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.

7.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

8.Deluge Protection to: DTS01

9.Operating Temperature Range: -50°C to +60°C (UL) and -60°C to +80°C (ATEX / IECEx)

10.Note: 710 cable glands are supplied dual ATEX/UL marked as standard.

11.Assembly Instruction Sheet: AI 316 (UL). AI 391 (ATEX / IECEx).

 

1.Cable Glands-American Series NEC,IEC.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

Installation Guide

Hawke 710 Cable Gland/Connector

 

 

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Thread/Options]

 

Example : 710/C/1"NPT

  

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 150/RAC Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Armoured SWA, Braided, Tape Armour Industrial Cable Glands 의 Hawke 150/RAC Cable Gland를 살펴보겠습니다.

 

 

 

Hawke

Cable Glands

150/RAC Cable Gland

Industrial

 

 

 

 

Application

Indoor use.
For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables. 

 

 

 

 

 

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.

 

 

 

 

 

Materials & Finishes

The 150/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

 

1.Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type BW, BX, BY and BZ.

2.Operating Temperature Range: -60°C to +100°C

3.Assembly Instruction Sheet: AI 325.

 

150RAC Spec IDK.pdf

150RAC Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Hawke Ordering Format [Gland Type/Size/Thread/Option]

 

Example without options : 150/RAC/C/M32

Example with alternative clamping ring option : 150/RAC/C/1-1/4"NPT/AR

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 151/RAC Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

Armoured SWA, Braided, Tape Armour Industrial Cable Glands 인 Hawke 151/RAC Cable Gland를 살펴보겠습니다.

 

 

 

Hawke

Cable Glands

151/RAC Cable Gland

Industrial

 

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

 

 

 

 

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

 

Materials & Finishes

The 151/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

 

1.Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type CW, CX, CY and CZ.

2.Ingress Protection: IP66 to IEC/EN 60529.

3.Operating Temperature Range: -60°C to +100°C

4.Deluge Protection to: DTS01 (Deluge seal optional).

5.Assembly Instruction Sheet: AI 393.

 

151RAC Spec IDK.pdf

151RAC Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 153/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

일반 산업형의 Armoured SWA, Braided, Tape Armour Industrial Cable Glands 에 적합한 Hawke 153/Universal Cable Gland를 소개드립니다.

 

 

 

 

Hawke

Cable Glands

153/Universal Cable Gland

Industrial

 

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit "COLD FLOW" characteristics.

 

 

 

 

 

 

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘cold flow’ characteristics.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

Materials & Finishes

The 153/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

 

Technical Data

1.Construction and Test Standards:

   EN 50262, BS 6121 : Part 1 Type E1W, E1X, E1Y and E1Z.

2.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days)

   to IEC/EN 60529.

3.Operating Temperature Range: -60°C to +80°C

4.Deluge Protection to: DTS01

5.Assembly Instruction Sheet: AI 372 (Sizes Os to F). AI 303 (Sizes G to J).

 

153 Universal.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Hawke Ordering Format [Gland Type/Size/Thread/Options]

Example without options : 153/UNIV/C/M32

Example with alternative clamping ring option : 153/UNIV/C/1-1/2"NPT/AR

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 114 Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 Industrial Type의 Conduit System 인 Hawke 114 Cable Gland에 대하여 살펴보겠습니다.

 

 

 

 

Hawke

Cable Glands

Industrial Type

 

 

 

Application

Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables installed in conduit.

 

 

 

 

Features

Provides a cable retention seal onto the cables outer sheath.
Provides female running coupler for cable gland or conduit entry.

 

 

 

 

 

Materials & Finishes

The 114 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

1.Construction and Test Standards: EN 50262.

2.Ingress Protection: IP66 to IEC/EN 60529 and NEMA 4X.

3.Operating Temperature Range: -60°C to +100°C

4.Assembly Instruction Sheet: AI 394.

 

114 Spec.pdf

114 Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Male Thread/Female Thread/Options]

Example without options : 114/C/M32/M32

Example with alternative seal option : 114/C/1-1/4"NPT/M32/S

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke CSB 656N Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke Conduit System 의 CSB 656N Cable Gland 에 대해 살펴보도록 하겠습니다.

 

 

 

Hawke

Cable Glands

CSB 656N Cable Gland

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe / Dust Extb /

Dual Certified ATEX - IECEx

 

 

 

 

 

 

 

Application

Outdoor or indoor use.
For use with conduit incorporating individual insulated conductors or for particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'COLD FLOW' characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

 

 

 

 

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable or conduit.
Seals conductors at entry to enclosure via conduit or enables an existing cable gland to be converted to a barrier type cable gland.
The device is fitted with a simple compound filled chamber which permits packing around individual insulated conductors. Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure. The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides female running coupler for cable gland or conduit entry.

 

 

 

 

 

 

Materials & Finishes

The CSB 656N cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, Extb IIIC Db

2.Certificate No's Baseefa06ATEX0058X and IECEx BAS 06.0015X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01

7.Operating Temperature Range: -60°C to +80°C

8.Assembly Instruction Sheet: AI 375.

 

CSB656N Spec.pdf

CSB656 Assembly.pdf

CSB656N Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Thread/Options]

Example : CSB 656N/C/M32/M32

 

 

 

  

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke SB 474 Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke의 Conduit System으로 대표되는 SB 474 Cable Gland를 소개합니다.

 

 

Hawke

Cable Glands

SB 474 Cable Gland

Group II Hazard

Flameproof Exd / Increased Safety Exe / Dust Extb /

Dual Certified ATEX - IECEx

 

 

 

 

Application

Outdoor or indoor use.
For particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'COLD FLOW' characteristics.
c) Enclosures for gas group IIC, under 2 litres in volume and containing an ignition source.
d) Enclosures for gas groups IIA or IIB, which are greater than 2 litres in volume and contain an ignition source.

 

 

 

 

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
The required number of holes for the cores are punched in the seal by means of a special tool to suit the core size.
Provides female running coupler for cable gland or conduit entry.

 

 

 

 

 

 

Materials & Finishes

The SB 474 cable gland is manufactured in Brass (standard), Nickel PlatedBrass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

 

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, Extb IIIC Db

2.Certificate No's Baseefa06ATEX0056X and IECEx BAS 06.0013X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01

7.Operating Temperature Range: -60°C to +80°C

8.Assembly Instruction Sheet: AI 309.

 

SB474 Spec.pdf

SB474 Assembly 01.pdf

SB474 Assembly 02.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Thread/Options]

Example : SB 474/C/M32/M32/Punch Tool No.1

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke PSG 553/RAC Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke PSG 553/RAC Cable Gland 에 대하여 살펴보겠습니다.

 

 

Hawke

Cable Glands

PSG 553/RAC Cable Gland

Group II Hazardous A

Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'cold flow' characteristics.
c) Enclosures for gas group IIC, under 2 litres in volume and containing an ignition source.
d) Enclosures for gas groups IIA or IIB, which are greater than 2 litres in volume and contain an ignition source.

 

 

 

 

 

Features

Provides a barrier seal to the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
The required number of holes for the cores are punched in the seal by means of a special tool to suit the core size.
Provides armour clamping using one clamping arrangement for all armour/braid types.
Deluge protection option available contact Hawke Technical Sales for details.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

Materials & Finishes

The PSG 553/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. 

 

Technical Data

1.Flameproof Exd and Increased Safety Exe ex logo II 2 GD ExtD A21.

2.Certificate No's Baseefa06ATEX0056X and IECEx BAS 06.0013X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01 (Deluge seal optional).

7.Operating Temperature Range: -60°C to +80°C

8.Assembly Instruction Sheet: AI 312.

 

 

PSG553RAC Spec.pdf

PSG553RAC Assembly 01.pdf

PSG553RAC Assembly 02.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Thread/Options]

Example : PSG 553/RAC/C/M32/Punch Tool No.1

 

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 501/453/RAC/L Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

Hawke Cable Glands 가운데, Lead inner Sheath 타입인 501/453/RAC/L Cable Gland를 살펴보고자 합니다.

 

 

 

Hawke

Cable Glands

501/453/RAC/L Cable Gland

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe / Dust Extb /

Dual Certified ATEX - IECEx

 

 

 

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.

 

 

 

 

 

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a seal and an electrical bond on the cables lead inner sheath.
Deluge protection option available, contact Hawke Technical Sales for details.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

Materials & Finishes

The 501/453/RAC/L cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. 

 

 

 

 

 

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, Extb IIIC Db

2.Certificate No's Baseefa06ATEX0056X and IECEx BAS 06.0013X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01 (Deluge seal optional).

7.Operating Temperature Range: -60°C to +80°C

8.Assembly Instruction Sheet: AI 302 & AI336.

 

 

 

501453RAC L Spec.pdf

501453RAC L Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Thread/Options]

Example with standard inner seal + bond option :

501/453/RAC/C/M32/L

Example with alternative inner seal + bond option :

501/453/RAC/C/1-1/4"NPT/K

Example with alternative clamping ring option :

501/453/RAC/C/1-1/4"NPT/AR

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 121 Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

비방폭일반지역(&Industrial)에서 적용가능한 호크 Hawke Run-Through, Non-Armoured 타입의 케이블글랜드는 무엇일까요? 바로 중공업, 해상플랜트, 선박 애플리케이션에서 적용되고 있는 121 Cable Gland 시리즈가 그 것이라 할 수 있겠습니다. 오늘 이 시간에는 같은 생김이지만 전혀 다르게 적용되는 121 Cable Gland 에 대해 살펴보도록 하겠습니다.

 

Application

Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables.

 

 

Features

Provides a cable retention seal onto the cables outer sheath.

 

 

 

Materials & Finishes

The 121 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

 

 

Industrial Type

What is an Industrial Standard cable gland?

Industrial cable glands are designed to reliably terminate cables into industrial enclosures, to provide a weather proof seal onto the cable, cable retention to prevent the cable being pulled out or twisted and they provide a secure and reliable grounding for the cable armour.

 

 

Technical Data

1.Construction and Test Standards: EN 50262. BS 6121 Part 1. Type A2.

2.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529.

3.Operating Temperature Range: -60°C to +100°C

4.Deluge Protection to: DTS01

5.Assembly Instruction Sheet: AI 392.

 

 

 

Hawke Accessories for Cable Glands

 

Hawke Thread Conversion Solutions for Cable Glands

 

 

Technical Data

 

121 Spec.pdf 

121 Assembly.pdf 

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

Installation Guide

 

 

 

Hawke Ordering Format [Gland Type/Size/Thread Options/Material]

 

Example without options : 121/C/M32

Example with alternative seal option : 121/C/1-1/2"NPT/S

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 501/414 Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Conduit System 관련 케이블글랜드인 501/414 Cable Gland를 살펴보도록 하겠습니다.

 

 

 

Hawke

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe / Dust Extb

Dual Certified ATEX - IECEx

 

 

Application

Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables installed in conduit.

 

 

 

 

 

Features

Provides a cable retention seal onto the cables outer sheath.
When used in increased safety applications, this cable gland may be used with braided cable where the braid and the cables outer sheath pass into the enclosure. The braid must be suitably terminated into the enclosure.
Provides female running coupler for cable gland or conduit entry.

 

 

 

 

Materials & Finishes

The Hawke 501/414 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

 

 

 

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, Extb IIIC Db

2.Certificate No's. : Baseefa06ATEX0056X and IECEx BAS 06.0013X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01

7.Operating Temperature Range: -60°C to +100°C

8.Assembly Instruction Sheet: AI 310.

 

 

Technical Data

501414 Spec IDK.pdf

501414 Assembly 01.pdf 

501414 Assembly 02.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Ordering Format

[ Gland Type / Size / Male Thread / Female Thread / Options ]

Example without options : 501/414/C/M32/M32

Example with alternative seal option : 501/414/C/1-1/4"NPT/M32/S

501/414/Os/M20/M20

501/414/Os/1/2"MPT/M20

501/414/Os/1/2"MPT/1/2"NPT

501/414/O/M20/M20

501/414/O/1/2"NPT/M20

501/414/O/1/2"NPT/1/2"NPT

501/414/A/M20/M20

501/414/A/1/2"NPT/M20

501/414/A/1/2"NPT/1/2"NPT

501/414/A/3/4"NPT/M20

501/414/A/3/4"NPT/3/4"NPT

501/414/B/M25/M25

501/414/B/3/4"NPT/M25

501/414/B/3/4"NPT/3/4"NPT

501/414/B/1"NPT/M25

501/414/B/1"NPT/1"NPT

501/414/C/M32/M32

501/414/C/1"NPT/M32

501/414/C/1"NPT/1'NPT

501/414/C/1-1/4"NPT/M32

501/414/C/1-1/4"NPT/1-1/4"NPT

501/414/C2/M40/M40

501/414/C2/1-1/4"NPT/M40

501/414/C2/1-1/4"NPT/1-1/4'NPT

501/414/C2/1-1/2"NPT/M40

501/414/C2/1-1/2"NPT/1-1/2"NPT

501/414/D/M50/M50

501/414/D/1-1/2"NPT/M50

501/414/D/1-1/2"NPT/1-1/2"NPT

501/414/D/2"NPT/M50

501/414/D/2"NPT/2"NPT

501/414/E/M63/M63

501/414/E/2"NPT/M63

501/414/E/2"NPT/2'NPT

501/414/E/2-1/2"NPT/M63

501/414/E/2-1/2"NPT/2-1/2"NPT

501/414/F/M75/M75

501/414/F/2-1/2"NPT/M75

501/414/F/2-1/2"NPT/2-1/2"NPT

501/414/F/3"NPT/M75

501/414/F/3"NPT/3"NPT

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 501/421 Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 Hawke 케이블글랜드 가운데, Non-armoured타입으로 대표되는 501/421 시리즈를 살펴보도록 하겠습니다.

 

 

 

 

Hawke

Group II Hazardous AreaFlameproof Exd / Increased Safety Exe / Dust Extb / Dual Certified ATEX - IECEx

 

 

What is a hazardous area cable gland?

Cable glands are designed to terminate cables into flameproof or increased safety equipment in hazardous areas. They provide a weather and gas-proof sealed connection between cable and equipment, prevent the cable being pulled out or twisted and provide a grounding of the cable armour.

The cost of a cable gland is insignificant when compared to that of other equipment. However, the cost of failure is high.

Though some cable glands may be "fit for purpose" what would be the potential cost of failure?

 

 

 

 

Application

The 501/421 cable gland provides a seal on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland is dual certified Exd and Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas. 

 

 

 

 

Features

When used in increased safety applications, this cable gland may be used with braided cable where the braid and the cables outer sheath pass into the enclosure. The braid must be suitably terminated inside the enclosure.

 

 

 

 

Materials & Finishes

The Hawke 501/421 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

 

 

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, Extb IIIC Db

2.Certificate No's:  Baseefa06ATEX0056X and IECEx BAS 06.0013X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: EC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01

7.Operating Temperature Range: -60°C to +100°C

8.Assembly Instruction Sheet: AI 307.

 

 

 

Hawke Accessories

 

 

 

 

 

Installation Guide

 

 

 

Technical Data

 

501421 Spec IDK.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

Hawke Ordering Format [ Gland Type / Size / Thread / Options ]

 

Example without options: 501/421 / C / M32

Example with alternative seal option: 501/421 / C / 1¼" NPT / S

 

501421/2K/M16

501421/Os/M20

501421/O/M20

501421/A/M20

501421/B/M25

501421/C/M32

501421/C2/M40

501421/D/M50

501421/E/M63

501421/F/M75

501421/G/M80

501421/H/M90

501421/J/M100

501421/Os/NPT1/2"

501421/A/NPT1/2"

501421/A/NPT3/4"

501421/B/NPT3/4"

501421/B/NPT1"

501421/C/NPT1"

501421/C/NPT1-1/4"

501421/C2/NPT1-1/4"

501421/C2/NPT1-1/2"

501421/D/NPT1-1/2"

501421/D/NPT2"

501421/E/NPT2"

501421/E/NPT2-1/2"

501421/F/NPT2-1/2"

501421/F/NPT3"

501421/G/NPT3-1/2"

501421/H/NPT3-1/2"

501421/J/NPT4"

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke 501/453/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 501/453/Universal (이하, 501/453/UNIV) 시리즈에 대하여 살펴보겠습니다.

Cold Flow Characteristics 를 충족하는 대표적인 아이템으로 선박과 중공업 및 해상플랜트에 많이 적용되고 있습니다.

 

 

Hawke

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe

Restricted Breathing ExnR / Dust Extb

Dual Certified ATEX - IECEx

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit 'cold flow' characteristics.

 

 

 

 

 

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has 'cold flow' characteristics.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

Materials & Finishes

The 501/453/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. 

 

 

1. Unique Rear Sealing System

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection.

The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

2. The Original Reversible Armour Clamp

The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accommodate all types of cable armour or braid. Unlike many of our competitors, the correct stamping orientation is marked clearly with the armour size and backed up by the presence of a groove in the component. Our RAC clamping system is also fully inspectable when positioned on the cable.

 

3. Zero Cable Damage

Our unique diaphragm sealing system does not damage cables which exhibit 'Cold Flow' characteristics. The diaphragm type seal is currently the only elastomeric seal to comply fully with IEC/EN 60079-14 and is therefore suitable on effectively filled 'cold flow' cables which would otherwise require barrier style cable glands. Our diaphragm seal is also unique in that it is the only flameproof elastomeric seal that can be visually inspected in operation - a real benefit to inspectors.

 

4.  Inspectable Deluge Seal

Our inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01. Indeed, our deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which prevents corrosion of the cable armour.

 

 

 

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, ExnR IIC Gc, Extb IIIC Db

2.Certificate No's : Baseefa06ATEX0057X and IECEx BAS 06.0014X for sizes Os - F.

3.Baseefa06ATEX0056X and IECEx BAS 06.0013X for sizes G - J.

4.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

5.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.

6.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

7.Deluge Protection to: DTS01

8.Operating Temperature Range: -60°C to +80°C

9.Assembly Instruction Sheet: AI 300 (Sizes Os to F). AI 303 (Sizes G to J).

 

 

 

 

Hawke Accessories

for 501/453/Universal (501/453/UNIV) 

 

 

 

Installation Guide

for Hawke 501/453/Universal Series

 

 

 

Hawke Order Format [Gland Type/Size/Thread/Options/Materials]

 

Example without options :501/453/UNIV/C/M32

 

Example without options, Nickel Plated Brass :501/453/UNIV/C/M32 Nickel Plated Brass

 

Example with alternative clamping ring option : 501/453/UNIV/C/1-1/4"NPT/AR

 

501/453/UNIV/Os/M16

501/453/UNIV/Os/M20

501/453/UNIV/Os/NPT1/2"

501/453/UNIV/O/M16

501/453/UNIV/O/M20

501/453/UNIV/O/NPT1/2"

501/453/UNIV/A/M20

501/453/UNIV/A/NPT1/2"

501/453/UNIV/A/NPT3/4"

501/453/UNIV/B/M25

501/453/UNIV/B/NPT3/4"

501/453/UNIV/B/NPT1"

501/453/UNIV/C/M32

501/453/UNIV/C/NPT1"

501/453/UNIV/C/NPT1-1/4"

501/453/UNIV/D/M50

501/453/UNIV/D/NPT1-1/2"

501/453/UNIV/D/NPT2"

501/453/UNIV/E/M63

501/453/UNIV/E/NPT2"

501/453/UNIV/E/NPT1-1/2"

501/453/UNIV/F/M75

501/453/UNIV/F/NPT2-1/2"

501/453/UNIV/F/NPT3"

501/453/UNIV/G/M80

501/453/UNIV/G/NPT3-1/2"

501/453/UNIV/H/M90

501/453/UNIV/H/NPT3-1/2"

501/453/UNIV/J/M100

501/453/UNIV/J/NPT4 

 

 

 

Technical Data

 

501453Universal Spec IDK.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 호크 ICG653Universal P/ICG653UNIV P타입 기술사양

 

안녕하세요 TIATIP 입니다.

 

이번 시간에는 호크(Hawke) 케이블글랜드 가운데 컴파운드(Compound)의 타입이자, 콜드플로우특성(cold flow characteristics)을 겸비한 ICG653Universal Series(ICG653Univ Series)의 신제품인 P타입을 살펴보겠습니다. 기존 호크(Hawke)의 ICG653UNIVERSAL(ICG653UNIV)에 비해 IP(Ingress Protection)등급의 테스트 기준특성이 보다 강화되어 있다는 특징이 있습니다.

 

호크 케이블글랜드

Hawke ICG653/Universal/P, Hawke ICG653/Univ/P

Cable Glands

Hazardous Area

Flameproof Exd & Increased Safety Exe & Restricted

Dual Certified ATEX/IECEx

 

 

 

호크의 대표적인 Universal(UNIV) 시리즈인 ICG653 UNIVERSAL과 501453 UNIVERSAL 타입입니다. 각 5번항목에서 확인할 수 있듯이  ICG653UNIV는 레드라벨이 501453 UNIV는 블랙라벨이 장착되어 있어 외관상으로 식별이 용이하도록 구성되어있습니다.

 

호크 케이블글랜드와 커넥터가 Hawke의 정크션박스(GRP JB/Stainless JB)와의 연결구성이 가능하다는 이미지 예시

 

 

 

호크 HAWKE ICG653UNIV 시리즈의 Brass 재질 및 구성이미지

 

 

호크 HAWKE ICG653UNIV 시리즈의 Nickel Plated Brass 재질 및 구성이미지

 

 

호크 HAWKE ICG653UNIV 시리즈의 개별 패키지 이미지

 

 

 

Hawke Application

• Outdoor or indoor use.

• For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables.

• For particular use with:
- Cables that are not eff ectively fi lled, compact and/or circular, have tape bedding or have hygroscopic fi llers.
- Cables that exhibit ‘Cold Flow’ characteristics.
- Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area.

• See technical section for installation rules and regulations.

 

 

 

호크 Hawke 케이블글랜드 장착예시

 

 

Hawke Technical Data

• Flameproof Exd and Increased Safety Exe II 2 GD Extb IIIC.

• Certifi cate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X.

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA,

  IIB and IIC.

• Construction and Test Standards:

   IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.

 

 

호크 HAWKE ICG653UNIVERSAL Series

 

 

• Ingress Protection:

  IP66, IP67, IP 68 : 60 metres for 6 hours to IEC/EN 60529.

• Deluge Protection to DTS01.

• Operating Temperature Range: -60°C to +80°C.

• Assembly Instruction Sheet: AI 461 & AI 462 IP68 Sealing Method.

 

 

호크

HAWKE

 

 

Features

• Provides a barrier seal to the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.

• Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.

• The compound chamber may be separated from the cured compound to ensure that the chamber has been eff ectively fi lled. If required, external voids can be repaired.

• Provides armour clamping, using one clamping arrangement for all armour / braid types.

• Provides an outer deluge seal to prevent moisture ingress to the cable armour / braid.

• Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

• Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.

• Brass NPT entries are nickel plated as standard.

 

 

호크

HAWKE

 

 

HAWKE Ordering Information

ICG653/UNIV/P/Os/M20, ICG653/UNIVERSAL/P/Os/M20

ICG653/UNIV/P/O/M20, ICG653/UNIVERSAL/P/O/M20

ICG653/UNIV/P/A/M20, ICG653/UNIVERSAL/P/A/M20

ICG653/UNIV/P/B/M25, ICG653/UNIVERSAL/P/B/M25

ICG653/UNIV/P/C/M32, ICG653/UNIVERSAL/P/C/M32

ICG653/UNIV/P/C2/M40, ICG653/UNIVERSAL/P/C2/M40

ICG653/UNIV/P/D/M50, ICG653/UNIVERSAL/P/D/M50

ICG653/UNIV/P/E/M63, ICG653/UNIVERSAL/P/E/M63

ICG653/UNIV/P/F/M75, ICG653/UNIVERSAL/P/F/M75

ICG653/UNIV/P/Os/1/2"NPT, ICG653/UNIVERSAL/P/Os/1/2"NPT

ICG653/UNIV/P/O/1/2"NPT, ICG653/UNIVERSAL/P/O/1/2"NPT

ICG653/UNIV/P/A/3/4"NPT, ICG653/UNIVERSAL/P/A/3/4"NPT

ICG653/UNIV/P/A/1/2"NPT, ICG653/UNIVERSAL/P/A/1/2"NPT

ICG653/UNIV/P/B/1"NPT, ICG653/UNIVERSAL/P/B/1"NPT

ICG653/UNIV/P/B/3/4"NPT, ICG653/UNIVERSAL/P/B/3/4"NPT

ICG653/UNIV/P/C/1-1/4"NPT, ICG653/UNIVERSAL/P/C/1-1/4"NPT

ICG653/UNIV/P/C/1"NPT, ICG653/UNIVERSAL/P/C/1"NPT

ICG653/UNIV/P/C2/1-1/2"NPT, ICG653/UNIVERSAL/P/C2/1-1/2"NPT

ICG653/UNIV/P/C2/1-1/4"NPT, ICG653/UNIVERSAL/P/C2/1-1/4"NPT

ICG653/UNIV/P/D/1-1/2"NPT, ICG653/UNIVERSAL/P/D/1-1/2"NPT

ICG653/UNIV/P/D/2"NPT, ICG653/UNIVERSAL/P/D/2"NPT

ICG653/UNIV/P/E/2"NPT, ICG653/UNIVERSAL/P/E/2"NPT

ICG653/UNIV/P/E/2-1/2"NPT, ICG653/UNIVERSAL/P/E/2-1/2"NPT

ICG653/UNIV/P/F/2-1/2"NPT, ICG653/UNIVERSAL/P/F/2-1/2"NPT

ICG653/UNIV/P/F/3"NPT, ICG653/UNIVERSAL/P/F/3"NPT

 

 

 

 

 

Hawke Accessories 

 

 

 

 

호크 Hawke ICG653 Universal Series 설치동영상

 

 

 

 

ICG653 UNIV P Spec(UPD111213).pdf

ICG653 UNIV Spec.pdf

ICG653 UNIV P (Issue B 12-13) - RELEASED 11Dec13.pdf

ICG653 UNIV P Glands IP68 (Issue C 12-13) - RELEASED 11Dec13.pdf

2.Hawke Accessories 2013 IDK.pdf

 

  

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

OSCG, Ex Type, Packing Type Cable Gland, OSXP-M

 

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 대한민국 케이블글랜드 국가대표 OSCG(오에스씨지)의 제품군 가운데 Packing Type Cable Gland, OSXP-M Type 을 살펴보겠습니다.

  

 

 

 

 

Packing Type Cable Gland, OSXP-M Type

 

 

OSXP-M Type (Bell-Mouthed)

◎ Flameproof

 

 

Application

◎ Outdoor & Indoor

◎ This cable gland is connected with cable or flexible fitting for electrical wquipment of machine 

 

 

오에스씨지(OSCG), Packings 선정노하우

1. 패킹타입, Packing Type (OSXP-M16, -M22, -M28, -M36, -M42, -M54, -M70, -M82, -M104)

2. 엔트리부분의 나사산형식, Thread Type (NPT, PF, PT등)

3. 나사산크기, Thread Size (1/2". 3/4", 1", 1-1/4". 1-1/2", 2", 2-1/2", 3", 4"등)

4. 재질, Material(Brass, Nickel Plated Brass, Stainless Steel)

5. 필요수량, Quantity

6. 필요악세서리, Accessories(Locknut, Sealing Washer, Earthtag, Shroud, Serrated Washer, Reducer, Adapter 등)

7. 품번예시

◎ OSCG, OSXP-M16-1/2"NPT

◎ OSCG, OSXP-M22-3/4"NPT

◎ OSCG, OSXP-M28-1"NPT

◎ OSCG, OSXP-M36-1.1/4"NPT

◎ OSCG, OSXP-M42-1.1/2"NPT

◎ OSCG, OSXP-M54-2"NPT

◎ OSCG, OSXP-M70-2.1/2"NPT

◎ OSCG, OSXP-M82-3"NPT

◎ OSCG, OSXP-M104-4"NPT

 

 

 

제품카탈로그(방폭환경)     

OSCG Ex Type IDK Blue 2013V13.pdf

 

 

제품카탈로그(비방폭, 일반산업환경)      

OSCG Normal Type IDK Green 2013V13.pdf

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

OSCG, Ex Type, Packing Type Cable Gland, OSXP-F(OSXPF)

 

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 대한민국 케이블글랜드 국가대표 OSCG(오에스씨지)의 제품군 가운데 Packing Type Cable Gland, OSXP-F(OSXPF) Type 을 살펴보겠습니다.

 

 

 

Packing Type Cable Gland, OSXP-F(OSXPF) Type

 

 

OSXP-F(OSXPF) Type

◎ Flameproof and Increased Safety

 

 

Application

◎ Outdoor & Indoor

◎ This cable gland is connected with conduit pipe for pipe connection or machine

 

 

오에스씨지(OSCG), Packing Type Cable Gland 선정노하우

1. 나사산형식, Thread Type (Metric, NPT, PF, PT 등)

2. 나사산크기, Thread Size (M16, M20, M32, M40, M50, M63, M75, M90, M100, 1/2". 3/4", 1", 1-1/4". 1-1/2", 2", 2-1/2", 3", 4"등)

3. 케이블외경, Cable Out Diameter(Min 00.0mm~ Max 00.0mm)

4. 글랜드재질, Material(Brass, Nickel Plated Brass, Stainless Steel)

5. 필요수량, Quantity

6. 필요악세서리, Accessories(Locknut, Sealing Washer, Earthtag, Shroud, Serrated Washer, Reducer, Adapter 등)

7. 품번예시

◎ OSCG, OSXP-F16-1/2"NPT

◎ OSCG, OSXP-F22-3/4"NPT

◎ OSCG, OSXP-F28-1"NPT

◎ OSCG, OSXP-F36-1.1/4"NPT

◎ OSCG, OSXP-F42-1.1/2"NPT

◎ OSCG, OSXP-F54-2"NPT

◎ OSCG, OSXP-F70-2.1/2"NPT

◎ OSCG, OSXP-F82-3"NPT

◎ OSCG, OSXP-F104-4"NPT

 

 

 

 

제품카탈로그(방폭환경)

OSCG Ex Type IDK Blue 2013V13.pdf

 

 

제품카탈로그(비방폭, 일반산업환경)     

OSCG Normal Type IDK Green 2013V13.pdf

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

OSCG, Ex Type, Cable Glands, OSNJ-A2FD

 

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 대한민국 케이블글랜드 국가대표 OSCG(오에스씨지)의 제품군 가운데 Cable Gland, OSNJ-A2FD Type 을 살펴보겠습니다.

 

 

 

 

Cable Gland, OSNJ-A2FD  Type

 

 

OSNJ-A2FD Type

◎ Flameproof and Increased Safety

 

 

Application

◎ Outdoor & Indoor

◎ For use with unarmoured for Zone1 and Zone2 in hazardous area.

◎ Double compression for jacket of cable.

 

 

Summary

◎ Hazardous Area/Industrial : Explosionproof

◎ Armoured/Non armoured : unarmoured

◎ Single/Double Compression : Double

 

 

오에스씨지(OSCG), Non Armoured Cable Gland 선정노하우

1. 나사산형식, Thread Type (Metric, NPT, PF, PT 등)

2. 나사산크기, Thread Size (M16, M20, M32, M40, M50, M63, M75, M90, M100, 1/2". 3/4", 1", 1-1/4". 1-1/2", 2", 2-1/2", 3", 4"등)

3. 케이블외경, Cable Out Diameter(Min 00.0mm~ Max 00.0mm)

4. 글랜드재질, Material(Brass, Nickel Plated Brass, Stainless Steel)

5. 필요수량, Quantity

6. 필요악세서리, Accessories(Locknut, Sealing Washer, Earthtag, Shroud, Serrated Washer, Reducer, Adapter 등)

7. 품번예시

◎ OSCG, OSNJ-A2FD-16a, OSNJ-A2FD-16a-M16, OSNJ-A2FD-16a-M20, OSNJ-A2FD-16a-1/2"NPT

OSCG, OSNJ-A2FD-16b, OSNJ-A2FD-16b-M16, OSNJ-A2FD-16b-M20, OSNJ-A2FD-16b-1/2"NPT

OSCG, OSNJ-A2FD-20a, OSNJ-A2FD-20a-M20, OSNJ-A2FD-20a-1/2"NPT, OSNJ-A2FD-20a-3/4"NPT

OSCG, OSNJ-A2FD-20b, OSNJ-A2FD-20b-M20, OSNJ-A2FD-20b-1/2"NPT, OSNJ-A2FD-20b-3/4"NPT

OSCG, OSNJ-A2FD-25a, OSNJ-A2FD-25a-M25, OSNJ-A2FD-25a-3/4"NPT, OSNJ-A2FD-25a-1"NPT

OSCG, OSNJ-A2FD-25b, OSNJ-A2FD-25b-M25, OSNJ-A2FD-25b-3/4"NPT, OSNJ-A2FD-25b-1"NPT

OSCG, OSNJ-A2FD-32a, OSNJ-A2FD-32a-M32, OSNJ-A2FD-32a-1"NPT, OSNJ-A2FD-32a-1.1/4"NPT

OSCG, OSNJ-A2FD-32b, OSNJ-A2FD-32b-M32, OSNJ-A2FD-32b-1"NPT, OSNJ-A2FD-32b-1.1/4"NPT

OSCG, OSNJ-A2FD-40a, OSNJ-A2FD-40a-M40, OSNJ-A2FD-40a-1.1/4"NPT, OSNJ-A2FD-40a-1.1/2"NPT

OSCG, OSNJ-A2FD-40b, OSNJ-A2FD-40b-M40, OSNJ-A2FD-40b-1.1/4"NPT, OSNJ-A2FD-40b-1.1/2"NPT

OSCG, OSNJ-A2FD-50a, OSNJ-A2FD-50a-M50, OSNJ-A2FD-50a-1.1/2"NPT, OSNJ-A2FD-50a-2"NPT

OSCG, OSNJ-A2FD-50b, OSNJ-A2FD-50b-M50, OSNJ-A2FD-50b-1.1/2"NPT, OSNJ-A2FD-50b-2"NPT

OSCG, OSNJ-A2FD-63a, OSNJ-A2FD-63a-M63, OSNJ-A2FD-63a-2"NPT, OSNJ-A2FD-63a-2.1/2"NPT

OSCG, OSNJ-A2FD-63b, OSNJ-A2FD-63b-M63, OSNJ-A2FD-63b-2"NPT, OSNJ-A2FD-63b-2.1/2"NPT

OSCG, OSNJ-A2FD-63c, OSNJ-A2FD-63c-M63, OSNJ-A2FD-63c-2"NPT, OSNJ-A2FD-63c-2.1/2"NPT 

OSCG, OSNJ-A2FD-75a, OSNJ-A2FD-75a-M75, OSNJ-A2FD-75a-2.1/2"NPT, OSNJ-A2FD-75a-3"NPT

OSCG, OSNJ-A2FD-75b, OSNJ-A2FD-75b-M75, OSNJ-A2FD-75b-2.1/2"NPT, OSNJ-A2FD-75b-3"NPT

OSCG, OSNJ-A2FD-75c, OSNJ-A2FD-75c-M75, OSNJ-A2FD-75c-2.1/2"NPT, OSNJ-A2FD-75c-3"NPT

OSCG, OSNJ-A2FD-75d, OSNJ-A2FD-75d-M75, OSNJ-A2FD-75d-2.1/2"NPT, OSNJ-A2FD-75d-3"NPT

◎ OSCG, OSNJ-A2FD-90a, OSNJ-A2FD-90a-M90, OSNJ-A2FD-90a-3"NPT, OSNJ-A2FD-90a-3.1/2"NPT

OSCG, OSNJ-A2FD-90b, OSNJ-A2FD-90b-M90, OSNJ-A2FD-90b-3"NPT, OSNJ-A2FD-90b-3.1/2"NPT

◎ OSCG, OSNJ-A2FD-100a, OSNJ-A2FD-100a-M100, OSNJ-A2FD-100a-3.1/2"NPT, OSNJ-A2FD-100a-4"NPT

OSCG, OSNJ-A2FD-100b, OSNJ-A2FD-100b-M100, OSNJ-A2FD-100b-3.1/2"NPT, OSNJ-A2FD-100b-4"NPT

 

 

Accessories for Cable Glands

 

 

 

제품카탈로그(방폭환경)     

OSCG Ex Type IDK Blue 2013V13.pdf

 

 

제품카탈로그(비방폭, 일반산업환경)     

OSCG Normal Type IDK Green 2013V13.pdf

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

OSCG, Ex Type, Cable Glands, OSNJ-A2F

 

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 대한민국 케이블글랜드 국가대표 OSCG(오에스씨지)의 제품군 가운데 OSCG Cable Gland, OSNJ-A2F Type 을 살펴보겠습니다.

 

 

OSCG Cable Gland, OSNJ-A2F  Type

 

 

OSNJ-A2F Type

◎ Flameproof and Increased Safety

 

 

Application

◎ Outdoor & Indoor

◎ For use with unarmoured and braid armoured cable for Zone1 and Zone2 in hazardous area.

◎ Single compression for jacket of cable.

 

 

Summary

◎ Hazardous Area/Industrial : Explosionproof

◎ Armoured/Non armoured : unarmoured and braid armoured

◎ Single/Double Compression : Single

 

 

오에스씨지(OSCG), A2F Type Cable Gland 선정노하우

1. 나사산형식, Thread Type (Metric, NPT, PF, PT 등)

2. 나사산크기, Thread Size (M16, M20, M32, M40, M50, M63, M75, M90, M100, 1/2". 3/4", 1", 1-1/4". 1-1/2", 2", 2-1/2", 3", 4"등)

3. 케이블외경, Cable Out Diameter(Min 00.0mm~ Max 00.0mm)

4. 글랜드재질, Material(Brass, Nickel Plated Brass, Stainless Steel)

5. 옵션사항, Option (예, Thread 18mm)

6. 필요수량, Quantity

7. 필요악세서리, Accessories(Locknut, Sealing Washer, Earthtag, Shroud, Serrated Washer, Reducer, Adapter 등)

8. 품번예시

◎ OSCG, OSNJ-A2F-16a, OSNJ-A2F-16a-M16, OSNJ-A2F-16a-M20, OSNJ-A2F-16a-1/2"NPT

OSCG, OSNJ-A2F-16b, OSNJ-A2F-16b-M16, OSNJ-A2F-16b-M20, OSNJ-A2F-16b-1/2"NPT

OSCG, OSNJ-A2F-20a, OSNJ-A2F-20a-M20, OSNJ-A2F-20a-1/2"NPT, OSNJ-A2F-20a-3/4"NPT

OSCG, OSNJ-A2F-20b, OSNJ-A2F-20b-M20, OSNJ-A2F-20b-1/2"NPT, OSNJ-A2F-20b-3/4"NPT

OSCG, OSNJ-A2F-25a, OSNJ-A2F-25a-M25, OSNJ-A2F-25a-3/4"NPT, OSNJ-A2F-25a-1"NPT

OSCG, OSNJ-A2F-25b, OSNJ-A2F-25b-M25, OSNJ-A2F-25b-3/4"NPT, OSNJ-A2F-25b-1"NPT

OSCG, OSNJ-A2F-32a, OSNJ-A2F-32a-M32, OSNJ-A2F-32a-1"NPT, OSNJ-A2F-32a-1.1/4"NPT

OSCG, OSNJ-A2F-32b, OSNJ-A2F-32b-M32, OSNJ-A2F-32b-1"NPT, OSNJ-A2F-32b-1.1/4"NPT

OSCG, OSNJ-A2F-40a, OSNJ-A2F-40a-M40, OSNJ-A2F-40a-1.1/4"NPT, OSNJ-A2F-40a-1.1/2"NPT

OSCG, OSNJ-A2F-40b, OSNJ-A2F-40b-M40, OSNJ-A2F-40b-1.1/4"NPT, OSNJ-A2F-40b-1.1/2"NPT

OSCG, OSNJ-A2F-50a, OSNJ-A2F-50a-M50, OSNJ-A2F-50a-1.1/2"NPT, OSNJ-A2F-50a-2"NPT

OSCG, OSNJ-A2F-50b, OSNJ-A2F-50b-M50, OSNJ-A2F-50b-1.1/2"NPT, OSNJ-A2F-50b-2"NPT

OSCG, OSNJ-A2F-63a, OSNJ-A2F-63a-M63, OSNJ-A2F-63a-2"NPT, OSNJ-A2F-63a-2.1/2"NPT

OSCG, OSNJ-A2F-63b, OSNJ-A2F-63b-M63, OSNJ-A2F-63b-2"NPT, OSNJ-A2F-63b-2.1/2"NPT

OSCG, OSNJ-A2F-63c, OSNJ-A2F-63c-M63, OSNJ-A2F-63c-2"NPT, OSNJ-A2F-63c-2.1/2"NPT 

OSCG, OSNJ-A2F-75a, OSNJ-A2F-75a-M75, OSNJ-A2F-75a-2.1/2"NPT, OSNJ-A2F-75a-3"NPT

OSCG, OSNJ-A2F-75b, OSNJ-A2F-75b-M75, OSNJ-A2F-75b-2.1/2"NPT, OSNJ-A2F-75b-3"NPT

OSCG, OSNJ-A2F-75c, OSNJ-A2F-75c-M75, OSNJ-A2F-75c-2.1/2"NPT, OSNJ-A2F-75c-3"NPT

OSCG, OSNJ-A2F-75d, OSNJ-A2F-75d-M75, OSNJ-A2F-75d-2.1/2"NPT, OSNJ-A2F-75d-3"NPT

◎ OSCG, OSNJ-A2F-90a, OSNJ-A2F-90a-M90, OSNJ-A2F-90a-3"NPT, OSNJ-A2F-90a-3.1/2"NPT

OSCG, OSNJ-A2F-90b, OSNJ-A2F-90b-M90, OSNJ-A2F-90b-3"NPT, OSNJ-A2F-90b-3.1/2"NPT

◎ OSCG, OSNJ-A2F-100a, OSNJ-A2F-100a-M100, OSNJ-A2F-100a-3.1/2"NPT, OSNJ-A2F-100a-4"NPT

OSCG, OSNJ-A2F-100b, OSNJ-A2F-100b-M100, OSNJ-A2F-100b-3.1/2"NPT, OSNJ-A2F-100b-4"NPT

 

 

 

 

제품카탈로그(방폭환경)     

OSCG Ex Type IDK Blue 2013V13.pdf

 

 

제품카탈로그(비방폭, 일반산업환경)      

OSCG Normal Type IDK Green 2013V13.pdf

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

OSCG, Ex Type, Cable Glands, E1XF

 

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 대한민국 케이블글랜드 국가대표 OSCG(오에스씨지)의 제품군 가운데 Braid Armoured Cable Gland, E1XF Type 을 살펴보겠습니다.

 

Braind Armoured Cable Gland, E1XF Type

 

 

E1XF Type

◎ Flameproof and Increased Safety

 

 

Application

◎ Outdoor & Indoor

◎ For use with braid armoured / Steel tape armoured cable for Zone1 and Zone2 in hazardous area.

◎ Double compression for outer/inner jacket of cable. Inspectable armoured clamping cable gland.

 

 

Summary

◎ Hazardous Area/Industrial : Explosionproof

◎ Armoured/Non armoured : braid armoured or Steel tape armoured

◎ Single/Double Compression : Double

 

 

 

오에스씨지(OSCG), Braid Armoured Type Cable Gland 선정노하우

1. 나사산형식, Thread Type (Metric, NPT, PF, PT 등)

2. 나사산크기, Thread Size (M16, M20, M32, M40, M50, M63, M75, M90, M100, 1/2". 3/4", 1", 1-1/4". 1-1/2", 2", 2-1/2", 3", 4"등)

3. 케이블외경/내경, Cable Diameter(Min 00.0mm~ Max 00.0mm)

4. 글랜드재질, Material(Brass, Nickel Plated Brass, Stainless Steel)

5. 옵션사항, Option (예, Thread 18mm)

6. 필요수량, Quantity

7. 필요악세서리, Accessories(Locknut, Sealing Washer, Earthtag, Shroud, Serrated Washer, Reducer, Adapter 등)

8. 품번예시

◎ OSCG, E1XF-16a, E1XF-16a-M16, E1XF-16a-M20, E1XF-16a-1/2"NPT

OSCG, E1XF-16b, E1XF-16b-M16, E1XF-16b-M20, E1XF-16b-1/2"NPT

OSCG, E1XF-20a, E1XF-20a-M20, E1XF-20a-1/2"NPT, E1XF-20a-3/4"NPT

OSCG, E1XF-20b, E1XF-20b-M20, E1XF-20b-1/2"NPT, E1XF-20b-3/4"NPT

OSCG, E1XF-25a, E1XF-25a-M25, E1XF-25a-3/4"NPT, E1XF-25a-1"NPT

OSCG, E1XF-25b, E1XF-25b-M25, E1XF-25b-3/4"NPT, E1XF-25b-1"NPT

OSCG, E1XF-32a, E1XF-32a-M32, E1XF-32a-1"NPT, E1XF-32a-1.1/4"NPT

OSCG, E1XF-32b, E1XF-32b-M32, E1XF-32b-1"NPT, E1XF-32b-1.1/4"NPT

OSCG, E1XF-40a, E1XF-40a-M40, E1XF-40a-1.1/4"NPT, E1XF-40a-1.1/2"NPT

OSCG, E1XF-40b, E1XF-40b-M40, E1XF-40b-1.1/4"NPT, E1XF-40b-1.1/2"NPT

OSCG, E1XF-50a, E1XF-50a-M50, E1XF-50a-1.1/2"NPT, E1XF-50a-2"NPT

OSCG, E1XF-50b, E1XF-50b-M50, E1XF-50b-1.1/2"NPT, E1XF-50b-2"NPT

OSCG, E1XF-63a, E1XF-63a-M63, E1XF-63a-2"NPT, E1XF-63a-2.1/2"NPT

OSCG, E1XF-63b, E1XF-63b-M63, E1XF-63b-2"NPT, E1XF-63b-2.1/2"NPT

OSCG, E1XF-63c, E1XF-63c-M63, E1XF-63c-2"NPT, E1XF-63c-2.1/2"NPT 

OSCG, E1XF-75a, E1XF-75a-M75, E1XF-75a-2.1/2"NPT, E1XF-75a-3"NPT

OSCG, E1XF-75b, E1XF-75b-M75, E1XF-75b-2.1/2"NPT, E1XF-75b-3"NPT

OSCG, E1XF-75c, E1XF-75c-M75, E1XF-75c-2.1/2"NPT, E1XF-75c-3"NPT

OSCG, E1XF-75d, E1XF-75d-M75, E1XF-75d-2.1/2"NPT, E1XF-75d-3"NPT

◎ OSCG, E1XF-90a, E1XF-90a-M90, E1XF-90a-3"NPT, E1XF-90a-3.1/2"NPT

OSCG, E1XF-90b, E1XF-90b-M90, E1XF-90b-3"NPT, E1XF-90b-3.1/2"NPT

◎ OSCG, E1XF-100a, E1XF-100a-M100, E1XF-100a-3.1/2"NPT, E1XF-100a-4"NPT

OSCG, E1XF-100b, E1XF-100b-M100, E1XF-100b-3.1/2"NPT, E1XF-100b-4"NPT

 

 

 

제품카탈로그(방폭환경)     

OSCG Ex Type IDK Blue 2013V13.pdf

 

 

제품카탈로그(비방폭, 일반산업환경)      

OSCG Normal Type IDK Green 2013V13.pdf

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

OSCG, Ex Type, Cable Glands, E1WF/LS

 

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 대한민국 케이블글랜드 국가대표 OSCG(오에스씨지)의 제품군 가운데 Wire Armoured Cable Gland, E1WF/LS Type 을 살펴보겠습니다.

 

 

Wire Armoured Cable Gland, E1WF/LS Type

 

 

E1WF/LS Type

◎ Flameproof and Increased Safety

 

 

Application

◎ Outdoor & Indoor

◎ For use with steel wire lead sheath cable for Zone1 and Zone2 in hazardous area.

◎ Double compression for outer/inner jacket of cable. Inspectable armoured clamping cable gland.

 

 

Summary

◎ Hazardous Area/Industrial : Explosionproof

◎ Armoured/Non armoured : Steel wire lead sheath

◎ Single/Double Compression : Double

 

 

오에스씨지(OSCG), Wire Armoured Type Cable Gland 선정노하우

1. 나사산형식, Thread Type (Metric, NPT, PF, PT 등)

2. 나사산크기, Thread Size (M16, M20, M32, M40, M50, M63, M75, M90, M100, 1/2". 3/4", 1", 1-1/4". 1-1/2", 2", 2-1/2", 3", 4"등)

3. 케이블외경/내경, Cable Diameter(Min 00.0mm~ Max 00.0mm)

4. 글랜드재질, Material(Brass, Nickel Plated Brass, Stainless Steel)

5. 옵션사항, Option (Thread 18mm)

6. 필요수량, Quantity

7. 필요악세서리, Accessories(Locknut, Sealing Washer, Earthtag, Shroud, Serrated Washer, Reducer, Adapter 등)

8. 품번예시

◎ OSCG, E1WF/LS-16a, E1WF/LS-16a-M16, E1WF/LS-16a-M20, E1WF/LS-16a-1/2"NPT

OSCG, E1WF/LS-16b, E1WF/LS-16b-M16, E1WF/LS-16b-M20, E1WF/LS-16b-1/2"NPT

OSCG, E1WF/LS-20a, E1WF/LS-20a-M20, E1WF/LS-20a-1/2"NPT, E1W/LSF-20a-3/4"NPT

OSCG, E1WF/LS-20b, E1WF/LS-20b-M20, E1WF/LS-20b-1/2"NPT, E1WF/LS-20b-3/4"NPT

OSCG, E1WF/LS-25a, E1WF/LS-25a-M25, E1WF/LS-25a-3/4"NPT, E1WF/LS-25a-1"NPT

OSCG, E1WF/LS-25b, E1WF/LS-25b-M25, E1WF/LS-25b-3/4"NPT, E1WF/LS-25b-1"NPT

OSCG, E1WF/LS-32a, E1WF/LS-32a-M32, E1WF/LS-32a-1"NPT, E1WF/LS-32a-1.1/4"NPT

OSCG, E1WF/LS-32b, E1WF/LS-32b-M32, E1WF/LS-32b-1"NPT, E1WF/LS-32b-1.1/4"NPT

OSCG, E1WF/LS-40a, E1WF/LS-40a-M40, E1WF/LS-40a-1.1/4"NPT, E1WF/LS-40a-1.1/2"NPT

OSCG, E1WF/LS-40b, E1WF/LS-40b-M40, E1WF/LS-40b-1.1/4"NPT, E1WF/LS-40b-1.1/2"NPT

OSCG, E1WF/LS-50a, E1WF/LS-50a-M50, E1WF/LS-50a-1.1/2"NPT, E1WF/LS-50a-2"NPT

OSCG, E1W/LSF-50b, E1WF/LS-50b-M50, E1WF/LS-50b-1.1/2"NPT, E1WF/LS-50b-2"NPT

OSCG, E1WF/LS-63a, E1WF/LS-63a-M63, E1WF/LS-63a-2"NPT, E1WF/LS-63a-2.1/2"NPT

OSCG, E1WF/LS-63b, E1WF/LS-63b-M63, E1WF/LS-63b-2"NPT, E1WF/LS-63b-2.1/2"NPT

OSCG, E1WF/LS-63c, E1WF/LS-63c-M63, E1WF/LS-63c-2"NPT, E1WF/LS-63c-2.1/2"NPT 

OSCG, E1WF/LS-75a, E1WF/LS-75a-M75, E1WF/LS-75a-2.1/2"NPT, E1WF/LS-75a-3"NPT

OSCG, E1WF/LS-75b, E1WF/LS-75b-M75, E1WF/LS-75b-2.1/2"NPT, E1WF/LS-75b-3"NPT

OSCG, E1WF/LS-75c, E1WF/LS-75c-M75, E1WF/LS-75c-2.1/2"NPT, E1WF/LS-75c-3"NPT

OSCG, E1WF/LS-75d, E1WF/LS-75d-M75, E1WF/LS-75d-2.1/2"NPT, E1WF/LS-75d-3"NPT

◎ OSCG, E1WF/LS-90a, E1WF/LS-90a-M90, E1WF/LS-90a-3"NPT, E1WF/LS-90a-3.1/2"NPT

OSCG, E1WF/LS-90b, E1WF/LS-90b-M90, E1WF/LS-90b-3"NPT, E1WF/LS-90b-3.1/2"NPT

◎ OSCG, E1WF/LS-100a, E1WF/LS-100a-M100, E1WF/LS-100a-3.1/2"NPT, E1WF/LS-100a-4"NPT

OSCG, E1WF/LS-100b, E1WF/LS-100b-M100, E1WF/LS-100b-3.1/2"NPT, E1WF/LS-100b-4"NPT

 

 

 

제품카탈로그(방폭환경)     

OSCG Ex Type IDK Blue 2013V13.pdf

 

 

제품카탈로그(비방폭, 일반산업환경)     

OSCG Normal Type IDK Green 2013V13.pdf

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (949)
TIA (92)
TIP (194)
TIEx (593)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)