까다롭고 위험한 지역에서 실력을 발휘하는 호크케이블글랜드의 차별화된 특성 5가지

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 Hawke cable gland 가 Flameproof and Increased safety를 요구하는 Harsh and Hazardous Area를 만나 발휘되는 주요 장점 5가지를 살펴봅니다.

 

 

 

 

1. Unique Rear Sealing System
This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

 

2. Unique Inspectable Compound Chamber
The revolutionary Hawke compound chamber has been designed with
inspectability in mind. The pre-lubricated compound chamber can be removed
once the compound has fully cured, allowing full inspection of the flameproof seal. If required minor surface voids can be repaired in situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal, resulting in reduced piece parts, as there is no longer a requirement to separate the seal from the compound chamber.

 

 

 

 

 

3. Zero Cable Damage
The unique Hawke diaphragm sealing system does not damage cable with
'Cold Flow' characteristics. The diaphragm type seal is the only elastomeric seal to comply fully with EN 60079-14 and IEC 60079-14 and is therefore suitable on cables which would otherwise require barrier style cable glands.
The Hawke diaphragm seal is also unique in that it is the only flameproof
elastomeric seal that can be visually inspected in operation - A real benefit to
ATEX inspectors.

 

 

 


4. The Original Reversible Armour Clamp
The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accomodate all types of cable armour or braid. Unlike many of our competitors the correct clamping orientation is marked clearly with a 'W', 'Z' or 'X' and backed up by the presence of a groove in the component. Hawke's RAC clamping system is also fully inspectable when positioned on the cable.

 

 

 

 

 

5. Inspectable Deluge Seal
Hawke's inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01.

 

 

 

Indeed Hawke's deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which could potentially corrode the cable armour

 

 

 

 

 

 

 

기술문의 및 제품상담

고객성공  아이디케이

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 321 Cable Gland

 

안녕하세요?  TIATIP 입니다.

 

오늘은 Hawke 호크케이블그랜드 가운데 Increased Safety, Ex'e' 타입의 애플리케이션에 해당하는 제품인 Hawke 321 케이블그랜드를 소개합니다.

 

 

 

 

Hawke

Cable Glands
Hazardous Area
Increased Safety Exe
Dual Certified ATEX / IECEx

Hawke 321 Cable Gland

 

 

 

 

 

The 321 Cable Gland is only available from Hawke nternational distributor Stahl-Syberg.

 

 

 Hawke 321 Cable Gland

 

 

Application

The 321 cable gland provides a seal on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland certifi ed Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.

 

 

Features

• When used in Increased Safety applications, this cable gland may be used

   with braided cable where the braid and the outer sheath pass into the

   enclosure.

• The braid must then be suitably terminated inside the enclosure.
   Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079

   series standards for Exe applications.

• Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or

   Aluminium.

• Brass NPT entries are nickel plated as standard.

 

 

Hawke Accessories for Cable Glands and Junction Boxes/Enclosures

 

 

 

 

Technical Data

• Increased Safety Exe II 2 GD ExtD A21.

• Certifi cate No’s: Baseefa06ATEX0059X and IECEx BAS 06.0016X.

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA,

   IIB and IIC.

• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN

  61241-0 and IEC/EN 61241-1.

• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

  60529 and NEMA 4X.

• Deluge Protection to DTS01.

• Operating Temperature Range: -60°C to +100°C.

• Assembly Instruction Sheet: AI 307.

• Alternative certifi cation options available:

 

 

 

 

품번예시(기본틀)

321/2K/M16,321/Os/M20,321/O/M20,321/A/M20,321/B/M25,321/C/M32,

321/C2/M40,321/D/M50,321/E/M63,321/F/M75,321/G/M80,321/H/M90,

321/J/M100,321/Os/1/2"NPT,321/O/1/2"NPT,321/A/3/4"NPT,321/A/1/2"NPT,

321/B/1"NPT,321/B/3/4"NPT,321/C/1-1/4"NPT,321/C/1"NPT,321/C2/1-1/2"NPT,

321/C2/1-1/4"NPT,321/D/2"NPT,321/D/1-1/2"NPT,321/E/2-1/2"NPT,

321/E/2"NPT,321/F/3"NPT,321/F/2-1/2"NPT,321/G/3-1/2"NPT,

321/H/3-1/2"NPT,321/J/4"NPT

 

 

 

 

Hawke Thread Conversion Solutions for Cable Glands and Junction Boxes/Enclosures

 

 

 

보다 자세한 사양(Technical Specification)은 다음의 세가지 첨부파일을 참고하시기 바랍니다.

 

 

321 IDK Spec 20110609.pdf

321 IDK Spec 20140611.pdf

321 Assembly 3.pdf

1.Cable Glands-Group ll.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고

'TIEx > HAWKE' 카테고리의 다른 글

Hawke 153RAC Cable Gland의 주요특징 및 기술사양  (0) 2013.01.04
Hawke Cable Gland 악세서리모음  (0) 2012.12.18
Hawke 321 Cable Gland  (0) 2012.12.18
Hawke SB474 Cable Gland  (0) 2012.12.18
Hawke PSG553RAC Cable Gland  (0) 2012.12.18
Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 501453RAC Cable Glands

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크케이블 그랜드의 베스트셀러 501453RAC 를 소개합니다.

 

 

 

 

폭넓은 산업플랜트 어플리케이션으로 국내외 EPC사와 조선분야 마린 어플리케이션에서 가장 많이 찾고 계신 타입입니다.

 

Cable Glands
Hazardous Area
Flameproof Exd & Increased Safety Exe
Dual Certifi ed ATEX / IECEx

501453RAC Cable Glands

 

 

 

 

501/453RAC 시리즈의 일반적(Brass재질)인 품번은 다음과 같습니다.

최근에는 Nickel Plated Brass 재질을 많이 사용하고 있으며, 품번 끝에 해당 재질을 기재하면 됩니다. 또는 약식으로 Fully N.P. 라고 명시되기도 합니다.

 

 

501/453RAC 시리즈

 

 

501/453/RAC/Os/M20

501/453/RAC/O/M20 

501/453/RAC/B/M25 

501/453/RAC/C/M32

501/453/RAC/C2/M40

501/453/RAC/D/M50 

501/453/RAC/E/M63 

501/453/RAC/F/M75 

501/453/RAC/G/M80

501/453/RAC/H/M90 

501/453/RAC/J/M100

501/453/RAC/Os/1/2"NPT

501/453/RAC/O/1/2"NPT

501/453/RAC/A/M20

501/453/RAC/A/3/4"NPT

501/453/RAC/A/1/2"NPT

501/453/RAC/B/1"NPT

501/453/RAC/B/3/4"NPT

501/453/RAC/C/1-1/4"NPT

501/453/RAC/C/1"NPT

501/453/RAC/C2/1-1/2"NPT

501/453/RAC/C2/1-1/4"NPT

501/453/RAC/D/2"NPT

501/453/RAC/D/1-1/2"NPT

501/453/RAC/E/2-1/2"NPT

501/453/RAC/E/2"NPT

501/453/RAC/F/3"NPT

501/453/RAC/F/2-1/2"NPT

501/453/RAC/G/3-1/2"NPT

501/453/RAC/H/3-1/2"NPT

501/453/RAC/J/4"NPT

 

 

Application

• Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’

   elastomer and plastic insulated cables.

 

 

 

Features

Provides armour clamping using one clamping arrangement for all

   armour/braid types.
Provides a seal on the cables inner sheath.
Deluge protection option available, contact Hawke Technical Sales for details.
Provides a cable retention and low smoke and fume, zero halogen seal onto

   the cables outer sheath.

 

 

 

Materials & Finishes

The 501/453/RAC cable gland is manufactured in Brass (standard), Nickel

   Plated Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.

 

 

악세서리

 

 

Technical Data

 

Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0056X.
IECEx Certificate No. IECEx BAS 06.0013X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

   60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

   60529 and NEMA 4X.
Deluge protection to DTS01 (Deluge seal optional).
Operating Temperature Range: -60°C to +80°C.
Alternative certification options available:

 

 

보다 상세한 자료는 첨부파일을 참고하시기 바랍니다.

 

Hawke 호크 501453RAC 01.pdf

Hawke 호크 Accessories 01.pdf

Hawke 호크 501453RAC 조립도 01.pdf

 

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 501423 Cable Glands 제품사양

 

안녕하세요 TIATIP 입니다

 

오늘은 Hawke 호크 케이블그랜드 가운데 501423 을 살펴보겠습니다.

 

 

 

Cable Glands
Hazardous Area
Flameproof Exd & Increased Safety Exe
Dual Certifi ed ATEX / IECEx

501423 Cable Glands

 

 

501/423 Cable Glands 시리즈

 

 

 

501/423 시리즈는 Double Compression 타입의 Non-Amoured 케이블에 적합한 사양으로 관통형입니다. 표준재질인 Brass에 해당하는 품번이며, Nickel Plated Brass의 경우에는 품번 끝단에 Nickel Plated Brass 또는 Fully N.P.B 라고 명시됩니다.

 

501/423/Os/M20

501/423/O/M20

501/423/A/M20

501/423/B/M25

501/423/C/M32

501/423/C2/M40

501/423/D/M50

501/423/E/M63

501/423/F/M75

501/423/G/M80

501/423/H/M90

501/423/J/M100

 

501/423/Os/1/2"NPT

501/423/O/1/2"NPT

501/423/A/3/4"NPT

501/423/A/1/2"NPT

501/423/B/1"NPT

501/423/B/3/4"NPT

501/423/C/1-1/4"NPT

501/423/C/1"NPT

501/423/C2/1-1/2"NPT

501/423/C2/1-1/4"NPT

501/423/D/2"NPT

501/423/D/1-1/2"NPT

501/423/E/2-1/2"NPT

501/423/E/2"NPT

501/423/F/3"NPT

501/423/F/2-1/2"NPT

501/423/G/3-1/2"NPT

501/423/H/3-1/2"NPT

501/423/J/4"NPT

 

 

Applicaiton

The 501/423 cable gland provides two independent seals on non-armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath. The cable gland is dual certified Exd and Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.

 

 

Features

• Provides superior cable retention to standard unarmoured cable glands, with

   seal at two independent points.
When used in increased safety applications, this cable gland may be used

   with braided cable where the braid and the outer sheath pass into the

   enclosure. The braid must be suitably terminated inside the enclosure.

Material & Finishes

The 501/423 cable gland is manufactured in Brass (standard), Nickel Plated 

   Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.

 

악세서리

 

 

 

Technical Data

Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0056X.
IECEx Certificate No. IECEx BAS 06.0013X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

   60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

   60529 and NEMA 4X.
Deluge protection to DTS01.
Operating Temperature Range: -60°C to +100°C.
Alternative certification options available:

 

보다 자세한 사양은 첨부파일을 참고하시기 바랍니다.

 

Hawke 호크 501423 01.pdf

Hawke 호크 Accessories 01.pdf

Hawke 호크 501423 조립도 01.pdf

 

 

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 501414 Cable Glands 제품사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크케이블그랜드 중에서 501414 타입을 살펴보도록 하겠습니다.

호크의 일반적인 케이블글랜드와는 달리 Conduit Entry 타입의 케이블글랜드 입니다.

 

 

 

Cable Glands
Hazardous Area
Flameproof Exd & Increased Safety Exe
Dual Certifi ed ATEX / IECEx

호크 501414 Cable Gland

 

 

 

 

호크 501/414 Cable Gland 시리즈

 

 

501/414 시리즈의  ISO Metric Thread 타입과 NPT 타입을 각각 다음과 같이 나누어 볼 수 있으며 각각의 Thread타입은 Cable의 Outer sheath의 Min.~Max. 범위별 Size 참조(Os, O, A, B, C, C2, D, E, F)로 구분됩니다.

 

일반적인 표준사양인 Brass재질의 궁성이며, Nickel Plated Brass는 품번 끝에 별도표기를 하시면 됩니다.

 

501/414의 고유특성상 Male Entry Thread Size와 Female Entry Thread Size를 상세하게 표기하는 방법으로 품번오류를 최소화할 수 있겠습니다.

 

501/414/Os/M20(Male)xM20(Female)

501/414/O/M20(Male)xM20(Female)

501/414/A/M20(Male)xM20(Female)

501/414/B/M25(Male)xM25(Female)

501/414/C/M32(Male)xM32(Female)

501/414/C2/M40(Male)xM40(Female)

501/414/D/M50(Male)xM50(Female)

501/414/E/M63(Male)xM63(Female)

501/414/F/M75(Male)xM75(Female)

 

501/414/Os/1/2"NPT(Male)x1/2"NPT(Female)

501/414/O/1/2"NPT(Male)x1/2"NPT(Female)

501/414/A/3/4"NPT(Male)x3/4"NPT(Female)

501/414/A/1/2"NPT(Male)x1/2"NPT(Female)

501/414/B/1"NPT(Male)x1"NPT(Female)

501/414/B/3/4"NPT(Male)x3/4"NPT(Female)

501/414/C/1-1/4"NPT(Male)x1-1/4"NPT(Female)

501/414/C/1"NPT(Male)x1"NPT(Female)

501/414/C2/1-1/2"NPT(Male)x1-1/2"NPT(Female)

501/414/C2/1-1/4"NPT(Male)x1-1/4"NPT(Female)

501/414/D/2"NPT(Male)x2"NPT(Female)

501/414/D/1-1/2"NPT(Male)x1-1/2"NPT(Female)

501/414/E/2-1/2"NPT(Male)x2-1/2"NPT(Female)

501/414/E/2"NPT(Male)x2"NPT(Female)

501/414/F/3"NPT(Male)x3"NPT(Female)

501/414/F/2-1/2"NPT(Male)x2-1/2"NPT(Female)

 

 

Application

• Outdoor or indoor use.

• For use with non-armoured elastomer and plastic insulated cables installed
  in conduit.

• See technical section for installation rules and regulations.

 

 

 

Features

Provides a cable retention seal onto the cables outer sheath.
When used in increased safety applications, this cable gland may be used with braided cable where the braid and the cables outer sheath pass into the enclosure.

The braid must be suitably terminated into the enclosure.
•  Provides female running coupler for cable gland or conduit entry.

•  The 501/414 cable gland is manufactured in Brass (standard), Nickel Plated  

   Brass, 316 Stainless Steel or Aluminium.
•  Brass NPT entries are nickel plated as standard.

 

 

악세서리

 

 

Technical Data

Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0056X.
IECEx Certificate No. IECEx BAS 06.0013X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

   60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529

   and NEMA 4X.
Deluge protection to DTS01.
Operating Temperature Range: -60°C to +100°C.

 

상세사양은 첨부파일을 참고하여 주시기 바랍니다.

 

Hawke 호크 501414 01.pdf

Hawke 호크 Accessories 01.pdf

Hawke 호크 501414 조립도 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 501421 Cable Glands 제품사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이시간에는 Hubbell 허벨그룹에 속해 Connection Solutions 을 책임지고 있는 Hawke 호크제품을 소개합니다.  호크케이블그랜드는 세계젹으로 그 명성을 떨치고 있으며, 중공업 및 EPC사에서 진행하는 조선 및 플랜트분야 애플리케이션에 준하는 모든 벤더에 속해있는 라인업을 갖추고 있습니다.

 

 

 

 

Hawke 501421 Cable Gland

 

 

 

 

Cable Glands
Hazardous Area
Flameproof Exd & Increased Safety Exe
Dual Certifi ed ATEX / IECEx

501421 Cable Gland

 

 

 

501/421 시리즈는 Single Compression 타입의 Non-Amoured 케이블에 적합한 사양으로 관통형입니다. 표준재질인 Brass에 해당하는 품번이며, Nickel Plated Brass의 경우에는 품번 끝단에 Nickel Plated Brass 또는 Fully N.P.B 라고 명시됩니다.

 

501/421/2K/M16,501/421/Os/M20,501/421/O/M20,501/421/A/M20,501/421/B/M25

501/421/C/M32,501/421/C2/M40,501/421/D/M50,501/421/E/M63,501/421/F/M75

501/421/G/M80,501/421/H/M90,501/421/J/M100, 501/421/Os/1/2"NPT,501/421/O/1/2"NPT,501/421/A/3/4"NPT,501/421/A/1/2"NPT,

501/421/B/1"NPT,501/421/B/3/4"NPT,501/421/C/1-1/4"NPT,501/421/C/1"NPT,501/421/C2/1-1/2"NPT,501/421/C2/1-1/4"NPT,501/421/D/2"NPT,501/421/D/1-1/2"NPT,501/421/E/2-1/2"NPT,501/421/E/2"NPT,501/421/F/3"NPT,501/421/F/2-1/2"NPT,501/421/G/3-1/2"NPT,501/421/H/3-1/2"NPT,501/421/J/4"NPT

 

 

501/421 시리즈

 

 

Application

The 501/421 cable gland provides a seal on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland is dual certifi ed Exd and Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.

 

 

Features

• When used in increased safety applications, this cable gland may be used with

   braided cable where the braid and the cables outer sheath pass into the

   enclosure.

The braid must be suitably terminated inside the enclosure.

 

 

 

Materials & Finishes

The 501/421 cable gland is manufactured in Brass (standard), Nickel Plated

   Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.

 

악세서리

 

 

Technical Data

 

Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0056X.
IECEx Certificate No. IECEx BAS 06.0013X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: EC/EN 60079-0, IEC/EN 60079-1, IEC/EN

   60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529

   and NEMA 4X.
Deluge protection to DTS01.
Operating Temperature Range: -60°C to +100°C.


 

보다 상세한 사양검토는 첨부파일의  케이블그랜드와 악세서리 파트를 각각  참고하시기 바랍니다.

 

Hawke 호크 501421 01.pdf

Hawke 호크 Accessories 01.pdf

Hawke 호크 501421 조립도 01.pdf

 

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)