EMGZ306A Compact Tension Measuring Amplifier

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Amplifier 가운데 베스트셀러인 EMGZ306A를 소개하고자 합니다.

 

The EMGZ306A series is a single channel analogue tension measuring amplifier.

 

 Model : EMGZ306A

 

1.  No programming required - Easy to setup

2.  Standardised analogue outputs - Multiconnectable with PLC, Display etc.

3.  Galvanically isolated - Protected against electrical noise

4.  DIN rail mount - Easy to mount in cabinet

5. Gain and offset setting by 20-turn trimmers - Precise adjustment guaranteed

 

 

FMS EMGZ306A Series

The EMGZ 306A Series is a single channel analogue tension measuring
amplifier. There can be two force sensors connected. All settings are
done with 20-turn trimmers which are easily accessible from the front.
The amplifier outputs are standardized ± 10 V tension output and 0…20 mA or 4…20 mA current output (switchable by jumpers).

 

For filtering of the output signals capacitors can be added.
As options 10 VDC sensor supply voltage and compound-filled versions
with additional vibration protection are available. The compound-filled version is used for rotating applications such as stranding machines, etc.

 

 

FMS EMGZ306A.CAL

This version provides a pushbutton to simulate 50 % of the nominal sensor
load. This allows to do the calibration of the amplifier by calculation instead
of physical simulation of the tension.

 

 

 

 

 

FMS 에프엠에스 EMGZ306A 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

안녕하세요 TIATIP 입니다

 

오늘은 잉곳(ingot)과 사파이어(sapphire) 제조공정에서 사용되는

Ingot Multi Wire Saw와, Sapphire Multi Wire Saw 장비에서 사용되어지고 있는 FMS(에프엠에스)의 Force Measuring Roller를 소개합니다.

 

Force Sensor를 활용한 Tension Control에는 다양한 라인업이 갖추어져 있지만,

해당 어플리케이션의 베스트셀러인 RMGZ100시리즈와 EMGZ306A시리즈 콤비네이션으로 구성하였습니다.

 

 

1. RMGZ 100 Series

 

RMGZ100 시리즈는 Force Measuring Roller 입니다.

장비메카니즘에 따라 특수제작이 가능합니다.

 

 

   

 

Nominal forces from 6~300 N - Sizes available for every application
10 times overload protection - No recalibration required
20 : 1 force measuring range - Wide measuring capability
Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ100 Series force measuring roller is used to measure the tension in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings.

 

 

Functional Descriptions

The RMGZ100 Series force measuring rollers utilize the flexion beam priciple. When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

 

 

2. EMGZ306A Series

 

EMGZ306A 시리즈는 RMGZ 100과 함께 구성되는 Tension Measuring Amplifier 입니다.

 

 

No programming required - Easy to setup
Standardised analogue outputs - Multiconnectable with PLC, Display etc.
Galvanically isolated - Protected against electrical noise
DIN rail mount - Easy to mount in cabinet
Gain and offset setting by 20-turn trimmers - Precise adjustment guaranteed

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

FMS 에프엠에스 EMGZ306A 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (957)
TIA (92)
TIP (194)
TIEx (601)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)