RMGZ100 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

 

오늘은 FMS의 베스트셀러 아이템인 RMGZ100 시리즈를 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ100 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

   

 

Model : RMGZ100

 

 

RMGZ100 Force Measuring Roller

1. Nominal forces from 6N~300 N - Sizes available for every application

2. 10 times overload protection - No recalibration required

3. 20 :1 force measuring range - Wide measuring capability

4. Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ 100 Series force measuring roller is used to measure the tension
in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings

 

 

Functional Description

The RMGZ 100 Series force measuring rollers utilize the flexion beam priciple.
When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

RMGZ Series

RMGZ106A

RMGZ111A

RMGZ112A

RMGZ115A

RMGZ121A

RMGZ121.5A

RMGZ123A

 

 

RMGZ Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

안녕하세요 TIATIP 입니다

 

오늘은 잉곳(ingot)과 사파이어(sapphire) 제조공정에서 사용되는

Ingot Multi Wire Saw와, Sapphire Multi Wire Saw 장비에서 사용되어지고 있는 FMS(에프엠에스)의 Force Measuring Roller를 소개합니다.

 

Force Sensor를 활용한 Tension Control에는 다양한 라인업이 갖추어져 있지만,

해당 어플리케이션의 베스트셀러인 RMGZ100시리즈와 EMGZ306A시리즈 콤비네이션으로 구성하였습니다.

 

 

1. RMGZ 100 Series

 

RMGZ100 시리즈는 Force Measuring Roller 입니다.

장비메카니즘에 따라 특수제작이 가능합니다.

 

 

   

 

Nominal forces from 6~300 N - Sizes available for every application
10 times overload protection - No recalibration required
20 : 1 force measuring range - Wide measuring capability
Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ100 Series force measuring roller is used to measure the tension in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings.

 

 

Functional Descriptions

The RMGZ100 Series force measuring rollers utilize the flexion beam priciple. When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

 

 

2. EMGZ306A Series

 

EMGZ306A 시리즈는 RMGZ 100과 함께 구성되는 Tension Measuring Amplifier 입니다.

 

 

No programming required - Easy to setup
Standardised analogue outputs - Multiconnectable with PLC, Display etc.
Galvanically isolated - Protected against electrical noise
DIN rail mount - Easy to mount in cabinet
Gain and offset setting by 20-turn trimmers - Precise adjustment guaranteed

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

FMS 에프엠에스 EMGZ306A 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (957)
TIA (92)
TIP (194)
TIEx (601)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)