RMGZ100B Force Measuring Roller 새모델 소개

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 그 동안 많은 사랑을 받았던 RMGZ100A Series 를 대신하여 FMS에서 새롭게 출시된 RMGZ100B Series 를 소개드리고자 합니다.

 

 

FMS

FMS Technology / FMS Force Measuring Systems

FMS Tension Control / Force Sensors

RMGZ / RMGZ100B Series

Force Measuring Roller

FMS force measuring rollers of the RMGZ100B series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

 

 

 

RMGZ 100 B Series

The RMGZ100B series force measuring roller is used to measure the tension in wire, cable and similar materials. An application specific sheave or pulley is
mounted to the two lifetime lubricated ball bearings.

 

 

 

 

Functional Description

The RMGZ100B series force measuring rollers works according to the dual flexion beam design. A quadruple foil type strain gauge mounted in a full Wheatstone bridge configuration performs the actual tension measurement.
This measuring principal ensures tension measurement with the highest accuracy also for low forces and at small wrap angles.

 

 

Features

10 times overload protection : No recalibration required 

20:1 force measuring range : Wide measuring capability

Nominal forces from 6 - 300 N :Sizes available for every application

Lifetime lubricated ball bearings : No maintenance necessary

 

 

Advantages

No recalibration required

Wide measuring capability

Covers perfectly the low application

No maintenance necessary

 

 

 

 

Technical Data & FMS CAT No.

FMS,RMGZ,RMGZ100B, RMGZ106B, RMGZ111B, RMGZ112B, RMGZ115B, RMGZ121B, RMGZ123B

FMS RMGZ100 A Spec IDK 단종.pdf

FMS RMGZ100 B Spec IDK 신규.pdf

FMS RMGZ100 Manual IDK.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Baumer Force and strain Sensers DSRT22DD Strain Links 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 바우머의 Strain Links / Strain Gauge 시리즈 가운데 Baumer DSRT22DD 제품사양에 대해 알아보도록 하겠습니다.

 

 

 

 

Baumer

Force and strain sensors

DSRT Series

Strain Links with Amplifier

DSRT22DD

 

 

General Information

Strain links measure the surface strain between the support surfaces. Strain links are ideally suited for measurements on rigid structures. Depending on design strain links can be used in cyclical and static applications.

 

 

• For cyclical and static measurements, with integrated amplifier
• Voltage output ±10 VDC
• Excellent signal to noise ratio
• High sensitivity

 

Features

• Static and dynamic applications
• Integrated reset switch for automatic zero point setting
• Measuring range ±100 up to ±750 με, extension and compression
• Voltage output

 

 

 

 

Technical Data

Baumer, DSRT, DSRT22DD, DSRT22DD-S5, DSRT22DDS5, DSRT22DD-S5-0100, DSRT22DD-S5-0250, DSRT22DD-S5-0350, DSRT22DD-S5-0500, DSRT22DD-S5-0750, DSRT 22DD-S5-0100, DSRT 22DD-S5-0250, DSRT 22DD-S5-0350, DSRT 22DD-S5-0500, DSRT 22DD-S5-0750

Force Starin Sensor CAT 201003XX.pdf

DSRT22DD DataSheet.pdf

DSRT Product Key.pdf

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

에프엠에스(FMS) 브로슈어 다운로드 링크

 

안녕하세요 TIATIP 입니다.

 

FMS에서 제공하는 브로슈어 일체를 다음과 같이 링크하였습니다.

편리하게 다운받아 사용하시기 바랍니다.

 

 

 

 

 

 

Converting  

http://www.fms-technology.com/downloads/broschueren/FMS_Converting_e.pdf

 

 

 

Cable and Wire

http://www.fms-technology.com/downloads/broschueren/FMS_Cable_and_Wire_e.pdf

 

 

 

Metals

http://www.fms-technology.com/downloads/broschueren/FMS_Metals_e.pdf

 

 

 

Paper

http://www.fms-technology.com/downloads/broschueren/FMS_Paper_e.pdf

 

 

 

Textile

http://www.fms-technology.com/downloads/broschueren/FMS_Textil_e.pdf

 

 

 

Belt Scales

http://www.fms-technology.com/downloads/broschueren/FMS_BeltScales_e.pdf

 

 

 

 

 

 

 

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.co

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS A203 Series Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

 

FMS에서 새롭게 선보이는 Forece Measuring Sensor A203 시리즈 입니다.

The A 203-Series Force Measuring Sensors is for use in live shaft roller applications. Their compact design and straightforward mounting concept provide new options in machines with difficult installation conditions. The installation to the machine side frame is simply accomplished with only using a single mounting screw.

 

 

 A203 Series

 

 

1. Compact Design, Easy Installation
Adaptable in machines with difficult mounting conditions

 

2. Accuracy Class 0.5 %
Highest accuracy even at low loads

 

3. Nominal Forces 50, 125, 250, 500 and 1000 N
Covers low and medium application range

 

4. Sensor Body of High Quality Aluminium
Heavy Duty, durable product with long term stability

 

 

 

A203 Series

The A 203-Series Force Measuring Sensors is for use in live shaft roller applications. Their compact design and straightforward mounting concept
provide new options in machines with difficult installation conditions.
The installation to the machine side frame is simply accomplished with
only using a single mounting screw.
The red point indicates the positive force measuring direction.
A 203 Sensors ensure highly accurate measuring results with any web
material and sizes. Their durability and operational reliability is excellent.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration
in each sensor perform the actual tension measurement. The force values
are received in the FMS measuring amplifier for further processing. The
dual flexion beam design of this sensor eliminates angular deflection under
load and ensures tension measurement with the highest accuracy and reliability. A built in mechanical hard-stop provides high overload protection for operation under the most stringent requirements. The M 8 connector enables straightforward wiring with the amplifier. The A 203-Series is compatible with the full line of FMS electronics.

 

 

A203 Series

A203.50.17

A203.125.17

A203.250.17

A203.500.17

A203.1000.17

 

 

A203 Series Acessories

50003519

50002729

50003520

50003518

50002693

50003485

7120035

50002632

 

 

 

 

 

FMS A203 Flyer.pdf

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

에프엠에스 FMS ZMGZ Force Measuring Journal

 

안녕하세요 TIATIP 입니다.

오늘은 에프엠에스(FMS)의 Force Measuring Journal 인 ZMGZ 시리즈를 소개합니다.

 

The ZMGZ series force measuring journals are used to measure the tension in continuous material processing. Force measuring journals are utilized with rollers that have an internal bearing. A bearing mounts to the bearing seat of the load cell and fits inside the roller.

 

 

 

Maker : FMS          Model : ZMGZ

 

 

에프엠에스(FMS) ZMGZ Series Force Measuring Journal

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring capability
3. Nominal forces from 100 – 3000 N - Sizes available for every application
4. Stainless steel sensor - Corrosion resistant, ultra durable

 

 

에프엠에스(FMS) ZMGZ Series

The ZMGZ Series force measuring journals are used to measure the tension in continuous material processing lines.

Force measuring journals are utilized with rollers that have an internal bearing.

A bearing mounts to the bearing seat of the load cell and fits inside the roller.
Thus the ZMGZ Series saves machine mounting space and providing a compact tension measuring roller assembly.

 

 

Functional Description
The ZMGZ Series force measuring journals utilize the flexion beam principle. When the Journal is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

 

ZMGZ Series

ZMGZ205.100

ZMGZ205.200

ZMGZ205.375

ZMGZ205.750

ZMGZ205.1500

ZMGZ207.100

ZMGZ207.200

ZMGZ207.375

ZMGZ207.750

ZMGZ207.1500

ZMGZ207.3000

 

 

ZMGZ Series Options

H14

H15

H16

H18

H21

H29

H30

 

 

 

 

 

 

FMS 에프엠에스 ZMGZ 01.pdf

 

 

내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

CR Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 CR Force Measuring Roller에 대해 알아보겠습니다.

 

The force measuring rollers of the CR208, CR210 and CR212 Series are ideal devises to measure tensions in wires, cables and narrow flat materials.

 

 

Model : CR208

 

CR 208, CR 210 and CR 212 Series Force Measuring Roller

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring range at high resolution
3. Nominal forces 50, 125, 250, 500, 1000, 1500 N - Covers a wide application range
4. Stainless steel sensor, Aluminium Cover - Corrosion resistant, ultra durable

 

 

CR 208, CR210, CR212 Series

The force measuring rollers of the CR 208, CR 210 and CR 212 Series are ideal devises to measure tensions in wires, cables and narrow flat materials. Because of their ability to accept a wide range of standard sheaves they can be utilised very flexibly. Sheave and bearing mount to the bearing seat of the load cell. The assembly of sheave and sensor to the machine frame is straight forward and quickly done. The red point at the connector indicates the positive measuring direction.

 

 

Functional Description
Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required.

 

 

CR203/CR210/CR212 Series

CR208.50

CR208.125

CR208.250

CR208.500

CR208.1000

CR208.1500

CR210.50

CR210.125

CR210.250

CR210.500

CR210.1000

CR210.1500

CR212.50

CR212.125

CR212.250

CR212.500

CR212.1000

CR212.1500

 

 

CR203/CR210/CR212 Series Options

PH

H14

H16

 

 

 

 

 

 

FMS 에프엠에스 CR208 CR210 CR212 01.pdf

 

 

내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ400/RMGZ600 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 에프엠에스 FMS의 Force Measuring Roller 가운데 RMGZ400과 RMGZ600 을 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ400/600 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

 

  Model : RMGZ400

 

 

RMGZ 400 and RMGZ 600  Series Force Measuring Roller

1. Nominal forces from 60 – 4000 N - Wide material processing range
2. 10 times overload protection - Recalibration is not required
3. 50 : 1 force measuring range - Wide measuring capability at high resolution
4. Lifetime lubricated ball bearings built-in - No maintenance necessary

 

 

RMGZ 400 and RMGZ 600

FMS force measuring roller RMGZ 400/600 series are used to measure the tension in wires, cables and narrow flat materials. An application specific sheave is mounted to the covering of the lifetime lubricated ball bearings.
A mounting hole with a key-way is required in the machine frame.
The key-way holds the position pin which prevents the sensor from twisting. The location of the position pin depends on the direction of force and the position of the red point.

 

 

Functional Description

The force measuring rollers RMGZ 400/600 work based on an enhanced bending beam principal. This ensures maximum accuracy and high measuring sensitivity. Four foiltype strain gauges configured in a full Wheatstone Bridge are utilized to measure the material tension. A mechanical hard stop ensures the highest overload protection and makes the sensor virtually indestructible. This combination provides highest accuracy and reliability without the need for recalibration.

 

 

RMGZ400, RMGZ600 Series

RMGZ400

RMGZ416B

RMGZ421B

RMGZ422B

RMGZ425B

RMGZ600

RMGZ631B

RMGZ632B

RMGZ634B

 

 

RMGZ400, RMGZ600 Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ400 RMGZ600 01.pdf

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ900 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 RMGZ900 Force Measuring Roller 에 대해 살펴보겠습니다.

 

The RMGZ900 series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications.

 

 

   Model : RMGZ900

 

 

RMGZ 900 Series Force Measuring Roller

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring capability
3. Nominal forces from 50 – 1000N - Sizes available for every application
4. Stainless steel sensor, anodised roller -Corrosion resistant, ultra-durable

 

 

RMGZ900

The RMGZ 900 Series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications.
They can be mounted horizontally or vertically directly to the machine frame. The red point on the base of the sensor indicates the positive measuring direction. Even with low material wrap angles, the design of the RMGZ 900 Series offers high accuracy measuring capability.

 

 

Functional Description
Foil type strain gauges mounted in a full Wheastone bridge configuration perform the actual tension measurement. The dual flexion beam design ensures accurate measurement at any position on the roller while maintaining the parallel position of the material and eliminating angular deflection. A built in mechanical hard-stop provides high overload protection ensuring that frequent calibration is not required

 

 

RMGZ900 Series

RMGZ915

RMGZ921

RMGZ922

RMGZ925

RMGZ928

RMGZ931

 

 

RMGZ900 Series Options

H12

H14

H15

H16

H18

 

 

RMGZ900 Series Mounting Flange

RMGZ900.581699

RMGZ900.582185

 

 

 

 

FMS 에프엠에스 RMGZ900 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

LMGZ.D Double Range Force Measuring Bearing

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 LMGZ.D Double Range Force Measuring Bearing에 대해 살펴보겠습니다.

 

The LMGZ.D double range force measuring bearing sensors offer the highest accuracy, reliability, and durability in the industry. Especially when processing widest kinds and widths of materials.

 

 Model : LMGZ.D

 

 

LMGZ.D Series Double Range Force Measuring Bearing

1. 200: 1 force measuring range - Extremely wide tension range capability
2. 10 times overload protection - No recalibration required
3. Nominal forces from 33 – 6000 N - Sizes available for every application
4. Stainless steel sensor - Corrosion resistant, ultra durable

 

 

LMGZ.D Series

The LMGZ.D double range force measuring bearing sensors offer the highest accuracy, reliability, and durability in the industry. Especially when processing widest kinds and widths of materials. Tension ranges up to 200: 1 can be accurately measured at high resolution. Utilising a combination of stainless steel construction, a built in mechanical hard stop, and individual sensor performance verification, the LMGZ.D double range force measuring bearings are perfect for all high performance running web applications, where a very wide range of material tensions are present.

Functional Description

LMGZ.D double range force measuring bearings are design to combine the live shaft bearing with the tension sensor to minimise machine space requirements. They can be mounted in any orientation directly to the machine frame or with supports. The red point on the connector part of the sensor indicates the positive measuring direction. The high accuracy design ensures that tension can still be measured accurately even with low material wrap angles and different material types and widths.

 

 

Measuring Principle

Foil type strain gauges mounted in two independent full Wheatstone Bridge configurations in each sensor perform the actual tension measurement. The live shaft bearing applies the force to the two measuring webs in a parallel plane as opposed to a typical bending beam, thus ensuring maximum accuracy and measuring sensitivity. A mechanical hardstop for each measuring range, which operates in both directions, ensures the high overload protection and makes the sensor virtually indestructible. The two individual measuring signals are sent to the amplifier. When the maximum limit of the low nominal force range is reached, a mechanical hardstop prevent the sensor from overloading. Over this limit the high measuring range is used. This combination guarantees the highest accuracy and reliability without the need for recalibration. To ensure the best possible tension reading at the low measuring range the roller weight should be as low as possible

 

 

LMGZ.D Series

LMGZ202.D.RF.H15

LMGZ305.D.RF.H15

LMGZ317.D.RF.H15

 

 

LMGZ.D Series options

H13

H14

H16

H18

H19

H29

H30

 

 

 

 

 

  FMS 에프엠에스 LMGZ.D 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

LMGZ Force Measuring Bearing

 

안녕하세요 TIATIP 입니다.

 

오늘은 에프엠에스 FMS의 Force Measuring Bearing인 LMGZ 시리즈를 살펴보겠습니다.

LMGZ시리즈는 국내 산업철강분야 즉, Metal, Steel & Iron 분야는 물론 타이어산업 분야등에서 많이 사용되고 있습니다.

 

제품은 아래 설명과 같이 FAG가 FMS로 거듭나는 시기에 FAG의 MGZ시리즈가 FMS의 LMGZ 시리즈로 재탄생한 것입니다.

 

FMS was founded in 1993, following a buyout from the FAG Kugelfischer company. Since that time, a dedicated team has been establishing its own company history in the web tension and web guiding industry through market-leading developments and successful international expansion. Today, FMS is the company of choice for manufacturers and users of web processing equipment around the globe. Success has been achieved in a wide cross-section of industries, processes, and materials.

 

The LMGZ series tension sensors offer the highest accuracy, reliability, and durability in the industry. The ultra flat sensor can be used in the most stringent space conditions.

 

 Model : LMGZ Series

 

 

Force Measuring Sensors (Load Cells) for Web Tension Control

All FMS force measuring sensors are characterised by its highest overload protection and its designated accuracy. It is achieved by a mechanical hardstop and four foil-type strain gauges in a full wheatstone bridge configuration. The red point on the outside of the sensor indicates the positive measuring direction. Most FMS force measuring sensors are also available as vacuum sensors.

 

 

LMGZ Series

LMGZ200

LMGZ201

LMGZ203

LMGZ205

LMGZ307

LMGZ310

LMGZ313

 

LMGZ Series Options 

H10

H13

H14

H15

H16

H18

H19

H21

H29

H30

 

 

 

 

FMS 에프엠에스 LMGZ 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

안녕하세요 TIATIP 입니다

 

오늘은 잉곳(ingot)과 사파이어(sapphire) 제조공정에서 사용되는

Ingot Multi Wire Saw와, Sapphire Multi Wire Saw 장비에서 사용되어지고 있는 FMS(에프엠에스)의 Force Measuring Roller를 소개합니다.

 

Force Sensor를 활용한 Tension Control에는 다양한 라인업이 갖추어져 있지만,

해당 어플리케이션의 베스트셀러인 RMGZ100시리즈와 EMGZ306A시리즈 콤비네이션으로 구성하였습니다.

 

 

1. RMGZ 100 Series

 

RMGZ100 시리즈는 Force Measuring Roller 입니다.

장비메카니즘에 따라 특수제작이 가능합니다.

 

 

   

 

Nominal forces from 6~300 N - Sizes available for every application
10 times overload protection - No recalibration required
20 : 1 force measuring range - Wide measuring capability
Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ100 Series force measuring roller is used to measure the tension in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings.

 

 

Functional Descriptions

The RMGZ100 Series force measuring rollers utilize the flexion beam priciple. When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

 

 

2. EMGZ306A Series

 

EMGZ306A 시리즈는 RMGZ 100과 함께 구성되는 Tension Measuring Amplifier 입니다.

 

 

No programming required - Easy to setup
Standardised analogue outputs - Multiconnectable with PLC, Display etc.
Galvanically isolated - Protected against electrical noise
DIN rail mount - Easy to mount in cabinet
Gain and offset setting by 20-turn trimmers - Precise adjustment guaranteed

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

FMS 에프엠에스 EMGZ306A 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)