Hawke 호크 Enclosure PL-Range GRP Series, PL630 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크 GRP 박스로 대표되는 PL Range 가운데 PL630 타입에 대해 살펴보겠습니다.

 

 

Hawke 호크 PL630 GRP Juction Box 

 

 

 

Hawke International

Enclosure Type : PL630

Glass Reinforced Polyester

Exe Enclosures for Harsh and Hazardous Locations

The Dual ATEX/IECEx Approved PL630 Enclosure

호크 

 

 

호크 정크션 박스 라인업

 

 

Technical Data

Increased Safety  II 2 GD Exe IIC Gb, Extb IIIC Db.
PL630 Certificates:
Baseefa Certificate No. Baseefa06ATEX0117X.
IECEx Certificate No. IECEx BAS 06.0028X.
ZPL630 Certificates:
Baseefa Certificate No. Baseefa06ATEX0116U.
IECEx Certificate No. IECEx BAS 06.0027U.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Construction and Test Standards:

IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 60079-31.
Ingress Protection: IP66 and IP67 to IEC/EN 60529.

Deluge protection to DTS01.

Operating Temperature Range: -60°C to +75°C.

Temperature Class and Ambient: T6 40°C,

optional T5 with ambients up to 65°C.

 

 

 


 

 

 

 

Hawke 호크 PL630 GRP Juction Box 

 

Please Note :

Hawke still offer enclosures to customer specifications available from our Box Modifiers.

An earth terminal equal to that of the largest power terminal will be fitted.

Terminals listed are only suitable for a minimum operating temperature of -50°C.

 

 

Materials And Finishes

Glass Reinforced Polyester. Natural Black Finish.
Flame Retardant to IEC 92.1 Clause 2.38

 

 

 

 

 

General Information

 

1. The Ultimate in Robust GRP Construction
Designed to withstand impact resistance up to 20Nm for PL6 series (7Nm for PL7 series). GRP construction provides a high degree of resistance to corrosive atmospheres.


2. Anti-Static Properties Removes the risk of ignition sources through static
induced sparking resistivity. Insulation resistance less than 1GΩ.


3. External Mounting Feet Eliminates the need to remove the lid when
mounting the enclosure on the wall.


4. Earth Continuity Plate Optional.


5. Stainless Steel Rating Label Highly durable and corrosion resistant.


6. Corrosion Resistant Stainless Steel Lid
Fixing Screws with Nylon Retaining Washers Prevents loss of screws during assembly and maintenance.


7. One Piece Durable Captive Moulded Silicone Gasket
DTS01 deluge protection. Provides Ingress Protection to IP66 and IP67.
Optimum performance at low and high temperature extremes.

 

 

 

Hawke International, 호크인터네셔날

 

 

 

Hawke Enclosure Catalogue HWK05 March 02.zip

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 호크 Enclosure PL-Range GRP Series, PL626 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크 정크션박스 가운데 GRP 박스로 대표되는 PL Range, 그 중 PL626 타입에 대해 살펴보겠습니다.

 

 

 

 

Hawke 호크 PL626 GRP Juction Box 

 

 

 

Hawke Enclosure Type : PL626

Glass Reinforced Polyester

PL Series GRP Enclosures

Exe Enclosures for Harsh and Hazardous Locations

The Dual ATEX/IECEx Approved PL626 Enclosure

호크

 

 

 

호크 정크션박스 라인업 이미지

 

Technical Data

Increased Safety ex logo II 2 GD Exe IIC Gb, Extb IIIC Db.
PL626 Certificates:
Baseefa Certificate No. Baseefa06ATEX0117X.
IECEx Certificate No. IECEx BAS 06.0028X.
ZPL626 Certificates:
Baseefa Certificate No. Baseefa06ATEX0116U.
IECEx Certificate No. IECEx BAS 06.0027U.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 60079-31.
Ingress Protection: IP66 and IP67 to IEC/EN 60529.

Deluge protection to DTS01.

Operating Temperature Range: -60°C to +75°C.

Temperature Class and Ambient: T6 40°C,

optional T5 with ambients up to 65°C.

 

 


 

  • PL626 Assembly Instructions adobe pdf logo
  • ZPL626 Assembly Instructions adobe pdf logo
  • Enclosure Data Sheet adobe pdf logo
  • Enclosure full technical specification
  • Enclosure wattage factor
  • Enclosure combined terminal resistance
  • Maximum physical quantity of terminals
  •  

     

     

     

    Hawke 호크 PL626 GRP Juction Box 

     

     

    Please Note :

    Hawke still offer enclosures to customer specifications available from our Box Modifiers.

    Terminals listed are only suitable for a minimum operating temperature of -50°C.

      

     

      

     

    Hawke Cable Gland Installation

    GRP박스에 대한 호크 케이블글랜드 구성 및 결선이미지

     

     

    Materials And Finishes

    Glass Reinforced Polyester. Natural Black Finish.
    Flame Retardant to IEC 92.1 Clause 2.38

     

     

     

     

     

     

    General Information

     

    1. The Ultimate in Robust GRP Construction
    Designed to withstand impact resistance up to 20Nm for PL6 series (7Nm for PL7 series). GRP construction provides a high degree of resistance to corrosive atmospheres.


    2. Anti-Static Properties Removes the risk of ignition sources through static
    induced sparking resistivity. Insulation resistance less than 1GΩ.


    3. External Mounting Feet Eliminates the need to remove the lid when
    mounting the enclosure on the wall.


    4. Earth Continuity Plate Optional.


    5. Stainless Steel Rating Label Highly durable and corrosion resistant.


    6. Corrosion Resistant Stainless Steel Lid
    Fixing Screws with Nylon Retaining Washers Prevents loss of screws during assembly and maintenance.


    7. One Piece Durable Captive Moulded Silicone Gasket
    DTS01 deluge protection. Provides Ingress Protection to IP66 and IP67.
    Optimum performance at low and high temperature extremes.

     

     

     

     

    Hawke Enclosure, Hawke Junction Boxes

     

     

     

    Hawke Enclosure Catalogue HWK05 March 02.zip

    Hawke Full catalogues_20101103.zip

     

     

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 호크 Enclosure PL-Range GRP Series, PL612 Type Junction Box

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크 GRP 박스로 대표되는 PL Range 가운데 막내 PL612 타입에 대해 살펴보겠습니다.

    Hawke 호크 PL612 GRP Juction Box 

     

    Enclosure Type : PL612

    Glass Reinforced Polyester

    Exe Enclosures for Harsh and Hazardous Locations

    The Dual ATEX/IECEx Approved PL612 Enclosure

     

     

     

    Hawke 호크 PL612 GRP Juction Box 

     

     

    Technical Data

    Increased Safety ex logo II 2 GD Exe IIC Gb, Extb IIIC Db.

    PL612 Certificates:
    Baseefa Certificate No. Baseefa06ATEX0117X.
    IECEx Certificate No. IECEx BAS 06.0028X.

    ZPL612 Certificates:
    Baseefa Certificate No. Baseefa06ATEX0116U.
    IECEx Certificate No. IECEx BAS 06.0027U.

    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.

    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

    IEC/EN 60079-31.

    Ingress Protection: IP66 and IP67 to IEC/EN 60529.

    Deluge protection to DTS01.

    Operating Temperature Range: -60°C to +75°C.

    Temperature Class and Ambient: T6 40°C,

    optional T5 with ambients up to 65°C.

     

     

     

     

     

     

     

    Hawke 호크 PL612 GRP Juction Box 

     

    Please Note :

    Hawke still offer enclosures to customer specifications available from our Box Modifiers.

     

    Terminals listed are only suitable for a minimum operating temperature of -50°C.

     

     

    Hawke 호크 PL612 GRP Juction Box 

     

     

    Materials And Finishes

    Glass Reinforced Polyester. Natural Black Finish.
    Flame Retardant to IEC 92.1 Clause 2.38

     

    Hawke 호크 PL612 GRP Juction Box 

     

     

    General Information

    Standard PL612 Enclosures are supplied complete with:
    Steel Earth Continuity Plate.
    1 x M20 offset tapped entry per face (entries not plugged).

     

     

     

     

     

    General Information

     

    1. The Ultimate in Robust GRP Construction
    Designed to withstand impact resistance up to 20Nm for PL6 series (7Nm for PL7 series). GRP construction provides a high degree of resistance to corrosive atmospheres.


    2. Anti-Static Properties Removes the risk of ignition sources through static
    induced sparking resistivity. Insulation resistance less than 1GΩ.


    3. External Mounting Feet Eliminates the need to remove the lid when
    mounting the enclosure on the wall.


    4. Earth Continuity Plate Optional.


    5. Stainless Steel Rating Label Highly durable and corrosion resistant.


    6. Corrosion Resistant Stainless Steel Lid
    Fixing Screws with Nylon Retaining Washers Prevents loss of screws during assembly and maintenance.


    7. One Piece Durable Captive Moulded Silicone Gasket
    DTS01 deluge protection. Provides Ingress Protection to IP66 and IP67.
    Optimum performance at low and high temperature extremes.

     

     

    Hawke Junction Boxes - PL  Range GRP Series

     

     

     

     

    Hawke Enclosure Catalogue HWK05 March 02.zip

    Hawke Full catalogues_20101103.zip

     

     

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

    카테고리

    TI Story (959)
    TIA (92)
    TIP (194)
    TIEx (603)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)