호크 Hawke ICG 653/Universal/L Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

앞서 소개드렸던 Hawke ICG 653/Universal 시리즈의 기본사양에 Lead Inner Sheath 에 적합하도록 구성된 케이블글랜드 입니다.

 

 

Hawke

Cable Glands

ICG 653/Universal/L Cable Gland

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe / Dust Extb /

Dual Certified ATEX - IECEx

 

 

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.
For particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'cold flow' characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

 

 

 

 

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for all armour/braid types.
Provides a seal and an electrical bond on the cables lead inner sheath.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

Materials & Finishes

The ICG 653/Universal/L cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

 

 

Technical Data

1.Exd IIC Gb, Exe II Gb, Extb IIIC Db

2.Certificate No's Baseefa06ATEX0058X and IECEx BAS 06.0015X.

3.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to: DTS01

7.Operating Temperature Range: -60°C to +80°C

8.Assembly Instruction Sheet: AI 301 & AI 336.

 

ICG653 Universal L Spec.pdf

ICG653 Universal L Assembly 01.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

Hawke Ordering Format

[Gland Type/Size/Thread/Options]

Example without options : ICG 653/UNIV/C/M32/L

Example with alternative clamping ring options :

ICG 653/UNIV/C/1-1/4"NPT/L/AR

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke ICG 653/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 Hawke 케이블글랜드 가운데 Barrier Seal, Compound 타입으로 대표되는 ICG653/Universal (이하 ICG/653/UNIV) 시리즈를 살펴보도록 하겠습니다.

 

 

Hawke

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe / Dust Extb

Dual Certified ATEX - IECEx

 

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit 'cold flow' characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

 

 

 

 

 

 

 

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.

 

 

 

1. Unique Rear Sealing System

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection.

The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

2. The Original Reversible Armour Clamp

The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accommodate all types of cable armour or braid. Unlike many of our competitors, the correct stamping orientation is marked clearly with the armour size and backed up by the presence of a groove in the component. Our RAC clamping system is also fully inspectable when positioned on the cable.

 

3. Inspectable Deluge Seal

Our inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01. Indeed, our deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which prevents corrosion of the cable armour.

 

4. Unique Inspectable Compound Chamber

Our revolutionary compound chamber has been designed with inspectability in mind. The pre-lubricated compound chamber can be removed once the compound has fully cured, allowing full inspection of the flameproof seal. If required, minor surface voids can be repaired in-situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal.


Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for all armour/braid types.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

 

Materials & Finishes

The ICG 653/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

 

 

 

 

Technical Data

1.Exd IIC Gb, Exe II Gb, Extb IIIC Db

2.Certificate No's : Baseefa06ATEX0058X and IECEx BAS 06.0015X.

3.Suitable for use in:Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

4.Construction and Test Standards:IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.

5.Ingress Protection:IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

6.Deluge Protection to:DTS01

7.Operating Temperature Range:-60°C to +80°C

8.Assembly Instruction Sheet:AI 301.

 

 

 

 

Hawke Accessories

 

 

 

 

Installation Guide

 

 

 

 

 

Technical Data

 

ICG653 UNIV Spec IDK.pdf

ICG653 Univ Note.pdf

ICG653 UNIV Assembly.pdf

ICG653 UNIV GHJ Assembly.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

Hawke Ordering Format [ Gland Type / Size / Thread / Options ]

 

Example without options : ICG 653/UNIV/C/M32

Example with alternative clamping ring option: ICG 653/UNIV/C/1¼"NPT/AR

 

ICG 653/UNIV/Os/M20

ICG 653/UNIV/O/M20

ICG 653/UNIV/A/M20

ICG 653/UNIV/B/M25

ICG 653/UNIV/C/M32

ICG 653/UNIV/C2/M40

ICG 653/UNIV/D/M50

ICG 653/UNIV/E/M63

ICG 653/UNIV/F/M75

ICG 653/UNIV/A/1/2"NPT

ICG 653/UNIV/A/3/4"NPT

ICG 653/UNIV/B/3/4"NPT

ICG 653/UNIV/B/1"NPT

ICG 653/UNIV/C/1"NPT

ICG 653/UNIV/C/1-1/4"NPT

ICG 653/UNIV/C2/1-1/4"NPT

ICG 653/UNIV/C2/1-1/2"NPT

ICG 653/UNIV/D/1-1/2"NPT

ICG 653/UNIV/D/2"NPT

ICG 653/UNIV/E/2"NPT

ICG 653/UNIV/E/2-1/2"NPT

ICG 653/UNIV/F/2-1/2"NPT

ICG 653/UNIV/F/3"NPT

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 호크 ICG653Universal P/ICG653UNIV P타입 기술사양

 

안녕하세요 TIATIP 입니다.

 

이번 시간에는 호크(Hawke) 케이블글랜드 가운데 컴파운드(Compound)의 타입이자, 콜드플로우특성(cold flow characteristics)을 겸비한 ICG653Universal Series(ICG653Univ Series)의 신제품인 P타입을 살펴보겠습니다. 기존 호크(Hawke)의 ICG653UNIVERSAL(ICG653UNIV)에 비해 IP(Ingress Protection)등급의 테스트 기준특성이 보다 강화되어 있다는 특징이 있습니다.

 

호크 케이블글랜드

Hawke ICG653/Universal/P, Hawke ICG653/Univ/P

Cable Glands

Hazardous Area

Flameproof Exd & Increased Safety Exe & Restricted

Dual Certified ATEX/IECEx

 

 

 

호크의 대표적인 Universal(UNIV) 시리즈인 ICG653 UNIVERSAL과 501453 UNIVERSAL 타입입니다. 각 5번항목에서 확인할 수 있듯이  ICG653UNIV는 레드라벨이 501453 UNIV는 블랙라벨이 장착되어 있어 외관상으로 식별이 용이하도록 구성되어있습니다.

 

호크 케이블글랜드와 커넥터가 Hawke의 정크션박스(GRP JB/Stainless JB)와의 연결구성이 가능하다는 이미지 예시

 

 

 

호크 HAWKE ICG653UNIV 시리즈의 Brass 재질 및 구성이미지

 

 

호크 HAWKE ICG653UNIV 시리즈의 Nickel Plated Brass 재질 및 구성이미지

 

 

호크 HAWKE ICG653UNIV 시리즈의 개별 패키지 이미지

 

 

 

Hawke Application

• Outdoor or indoor use.

• For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables.

• For particular use with:
- Cables that are not eff ectively fi lled, compact and/or circular, have tape bedding or have hygroscopic fi llers.
- Cables that exhibit ‘Cold Flow’ characteristics.
- Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area.

• See technical section for installation rules and regulations.

 

 

 

호크 Hawke 케이블글랜드 장착예시

 

 

Hawke Technical Data

• Flameproof Exd and Increased Safety Exe II 2 GD Extb IIIC.

• Certifi cate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X.

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA,

  IIB and IIC.

• Construction and Test Standards:

   IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.

 

 

호크 HAWKE ICG653UNIVERSAL Series

 

 

• Ingress Protection:

  IP66, IP67, IP 68 : 60 metres for 6 hours to IEC/EN 60529.

• Deluge Protection to DTS01.

• Operating Temperature Range: -60°C to +80°C.

• Assembly Instruction Sheet: AI 461 & AI 462 IP68 Sealing Method.

 

 

호크

HAWKE

 

 

Features

• Provides a barrier seal to the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.

• Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.

• The compound chamber may be separated from the cured compound to ensure that the chamber has been eff ectively fi lled. If required, external voids can be repaired.

• Provides armour clamping, using one clamping arrangement for all armour / braid types.

• Provides an outer deluge seal to prevent moisture ingress to the cable armour / braid.

• Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

• Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.

• Brass NPT entries are nickel plated as standard.

 

 

호크

HAWKE

 

 

HAWKE Ordering Information

ICG653/UNIV/P/Os/M20, ICG653/UNIVERSAL/P/Os/M20

ICG653/UNIV/P/O/M20, ICG653/UNIVERSAL/P/O/M20

ICG653/UNIV/P/A/M20, ICG653/UNIVERSAL/P/A/M20

ICG653/UNIV/P/B/M25, ICG653/UNIVERSAL/P/B/M25

ICG653/UNIV/P/C/M32, ICG653/UNIVERSAL/P/C/M32

ICG653/UNIV/P/C2/M40, ICG653/UNIVERSAL/P/C2/M40

ICG653/UNIV/P/D/M50, ICG653/UNIVERSAL/P/D/M50

ICG653/UNIV/P/E/M63, ICG653/UNIVERSAL/P/E/M63

ICG653/UNIV/P/F/M75, ICG653/UNIVERSAL/P/F/M75

ICG653/UNIV/P/Os/1/2"NPT, ICG653/UNIVERSAL/P/Os/1/2"NPT

ICG653/UNIV/P/O/1/2"NPT, ICG653/UNIVERSAL/P/O/1/2"NPT

ICG653/UNIV/P/A/3/4"NPT, ICG653/UNIVERSAL/P/A/3/4"NPT

ICG653/UNIV/P/A/1/2"NPT, ICG653/UNIVERSAL/P/A/1/2"NPT

ICG653/UNIV/P/B/1"NPT, ICG653/UNIVERSAL/P/B/1"NPT

ICG653/UNIV/P/B/3/4"NPT, ICG653/UNIVERSAL/P/B/3/4"NPT

ICG653/UNIV/P/C/1-1/4"NPT, ICG653/UNIVERSAL/P/C/1-1/4"NPT

ICG653/UNIV/P/C/1"NPT, ICG653/UNIVERSAL/P/C/1"NPT

ICG653/UNIV/P/C2/1-1/2"NPT, ICG653/UNIVERSAL/P/C2/1-1/2"NPT

ICG653/UNIV/P/C2/1-1/4"NPT, ICG653/UNIVERSAL/P/C2/1-1/4"NPT

ICG653/UNIV/P/D/1-1/2"NPT, ICG653/UNIVERSAL/P/D/1-1/2"NPT

ICG653/UNIV/P/D/2"NPT, ICG653/UNIVERSAL/P/D/2"NPT

ICG653/UNIV/P/E/2"NPT, ICG653/UNIVERSAL/P/E/2"NPT

ICG653/UNIV/P/E/2-1/2"NPT, ICG653/UNIVERSAL/P/E/2-1/2"NPT

ICG653/UNIV/P/F/2-1/2"NPT, ICG653/UNIVERSAL/P/F/2-1/2"NPT

ICG653/UNIV/P/F/3"NPT, ICG653/UNIVERSAL/P/F/3"NPT

 

 

 

 

 

Hawke Accessories 

 

 

 

 

호크 Hawke ICG653 Universal Series 설치동영상

 

 

 

 

ICG653 UNIV P Spec(UPD111213).pdf

ICG653 UNIV Spec.pdf

ICG653 UNIV P (Issue B 12-13) - RELEASED 11Dec13.pdf

ICG653 UNIV P Glands IP68 (Issue C 12-13) - RELEASED 11Dec13.pdf

2.Hawke Accessories 2013 IDK.pdf

 

  

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 호크 ICG653Universal Series 현장설치 가이드

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크(Hawke) 케이블글랜드 가운데 컴파운드(Compound)의 타입이자, 콜드플로우특성(cold flow characteristics)을 겸비한 ICG653Universal Series(ICG653Univ Series)의 설치운영 방법에 대해 살펴보겠습니다.

 

 

Hawke ICG653/Universal or Hawke

ICG653/Univ

Cable Glands

Hazardous Area

Flameproof Exd & Increased Safety Exe & Restricted

Dual Certified ATEX/IECEx

호크

 

 

 

호크 케이블글랜드(호크 케이블그랜드) Hawke ICG653 유니버셜타입의 내부 작업이미지

 

HAWKE 501453 UNIVERSAL TYPE (상) and ICG653 UNIVERSAL TYPE (하)

 

 

 

 

 호크 Hawke ICG/653/UNIV 개별보장 상태(1)


 

 호크 Hawke ICG/653/UNIV 개별보장 상태(2) 

 

 

Hawke Cable Glands Installation Guide

Hawke ICG653 Universal Series

호크

 

 

Hawke Ordering Information

ICG653/UNIV/Os/M20, ICG653/UNIVERSAL/Os/M20

ICG653/UNIV/O/M20, ICG653/UNIVERSAL/O/M20

ICG653/UNIV/A/M20, ICG653/UNIVERSAL/A/M20

ICG653/UNIV/B/M25, ICG653/UNIVERSAL/B/M25

ICG653/UNIV/C/M32, ICG653/UNIVERSAL/C/M32

ICG653/UNIV/C2/M40, ICG653/UNIVERSAL/C2/M40

ICG653/UNIV/D/M50, ICG653/UNIVERSAL/D/M50

ICG653/UNIV/E/M63, ICG653/UNIVERSAL/E/M63

ICG653/UNIV/F/M75, ICG653/UNIVERSAL/F/M75

ICG653/UNIV/Os/1/2"NPT, ICG653/UNIVERSAL/Os/1/2"NPT

ICG653/UNIV/O/1/2"NPT, ICG653/UNIVERSAL/O/1/2"NPT

ICG653/UNIV/A/3/4"NPT, ICG653/UNIVERSAL/A/3/4"NPT

ICG653/UNIV/A/1/2"NPT, ICG653/UNIVERSAL/A/1/2"NPT

ICG653/UNIV/B/1"NPT, ICG653/UNIVERSAL/B/1"NPT

ICG653/UNIV/B/3/4"NPT, ICG653/UNIVERSAL/B/3/4"NPT

ICG653/UNIV/C/1-1/4"NPT, ICG653/UNIVERSAL/C/1-1/4"NPT

ICG653/UNIV/C/1"NPT, ICG653/UNIVERSAL/C/1"NPT

ICG653/UNIV/C2/1-1/2"NPT, ICG653/UNIVERSAL/C2/1-1/2"NPT

ICG653/UNIV/C2/1-1/4"NPT, ICG653/UNIVERSAL/C2/1-1/4"NPT

ICG653/UNIV/D/1-1/2"NPT, ICG653/UNIVERSAL/D/1-1/2"NPT

ICG653/UNIV/D/2"NPT, ICG653/UNIVERSAL/D/2"NPT

ICG653/UNIV/E/2"NPT, ICG653/UNIVERSAL/E/2"NPT

ICG653/UNIV/E/2-1/2"NPT, ICG653/UNIVERSAL/E/2-1/2"NPT

ICG653/UNIV/F/2-1/2"NPT, ICG653/UNIVERSAL/F/2-1/2"NPT

ICG653/UNIV/F/3"NPT, ICG653/UNIVERSAL/F/3"NPT

 

 

 

Hawke Accessories 

호크 케이블글랜드, 호크케이블그랜드용 악세서리 (1)

Hawke Accessories and Thread Conversion Solutions

 

 

 

 

호크 케이블글랜드, 호크케이블그랜드용 악세서리 (2)

Hawke Accessories and Thread Conversion Solutions

 

 

 

 

 

 

ICG653 Assembly.pdf

Cable Glands-Group ll.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크케이블글랜드 라인업과 다운로드링크

 

안녕하세요 TIATIP 입니다.

Hawke(호크) 케이블글랜드 관련 자료를 다운로드할 수 있는 사이트링크를 요약해 드립니다.

 

 

 

Our Cable Glands cover the whole spectrum of armoured and non-armoured cable and applications from general industrial through increased safety, deluge, flameproof and explosion proof. The Cable Glands are available in Brass as standard with Stainless Steel and Aluminium, as an optional material on certain designs. The innovative design features included in the range make our Cable Glands the lowest lifetime cost solution.

 

 

Hazardous Area Cable Glands

Features

  • 501/414
  • 501/421
  • 501/423
  • 501/453/RAC
  • 501/453/RAC/L
  • 501/453/Universal
  • CSB 656N
  • ICG 623
  • ICG 653/Universal
  • ICG 653/Universal/L
  • PSG 553/RAC
  • SB 474
  •  

     

    Group 1 Mining

    Features

  • 453/RAC
  • 453/T
  • 453/Universal
  • 623
  • 653/T
  • 653/Universal
  •  

     

     

    North American Series Cable Glands

    Features

  • 153/X
  • 701
  • 710
  • 711
  • 713
  • 753
  • 755
  •  

     

    Industrial Cable Glands

    Features

  • 114
  • 121 (Type A2)
  • 123 (Type A2)
  • 150/RAC (Type BW, BX and BZ)
  • 151/RAC (Type CW, CX and CZ)
  • 153/RAC (Type E1W, E1X and E1Z)
  • 153/RAC/L (Type E2W, E2X and E2Z)
  • 153/Universal (Type E1W, E1X and E1Z)
  •  

     

    Increased Safety Cable Glands

    321

     

     

     

     

     

     

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke ICG653Universal/L Cable Gland

     

    안녕하세요 TIATIP입니다.

    오늘은 Hawke 호크케이블그랜드 가운데 Hazardous Area Cable Gland Type인  ICG653Universal/L 을 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    ICG 653/UNIVERSAL/L (for Lead Sheath Cables) Cable Gland

     

     

     

     

     

     

     

     

    ICG 653/UNIVERSAL/L (for Lead Sheath)

     

     

     

    Application

    • Outdoor or indoor use.
    • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.
    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

     

     

    Features

    • Provides a barrier seal between the individual insulated cores within the

       cable and prevents entry of the products of an explosion into the cable.
    • Assembly of the cable gland compresses and distributes the compound

       evenly to create a barrier seal at the point of entry into the enclosure.
    The compound chamber may be separated from the cured compound to

       ensure that the chamber has been effectively filled. If required, external voids

       can be repaired.
    Provides armour clamping, using one clamping arrangement for all

      armour/braid types.
    • Provides a seal and an electrical bond on the cables lead inner sheath.
    • Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    • Provides a cable retention and low smoke and fume, zero halogen seal onto

      the cables outer sheath.

     

     

     

    Materials & Finishes

    • The ICG 653/Universal/L cable gland is manufactured in Brass (standard),

       Nickel Plated Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

    • Exd IIC Gb, Exe II Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    IECEx Certificate No. IECEx BAS 06.0015X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 

      60529  and NEMA 4X.
    Deluge protection to DTS01.
    • Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

     

    보다 자세한 사양은 첨부의 세가지 파일을 참고하시기 바랍니다.

     

    Hawke 호크 ICG653 Universal L 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 ICG653 Universal L 조립도 01.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke SB474 Cable Gland  (0) 2012.12.18
    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke ICG653Universal Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크케이블그랜드 Hazardous Area Cable Gland Type인  ICG653Universal 을 알아보도록 하겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe & Restricted
    Dual Certifi ed ATEX / IECEx

    Hawke ICG 653/Universal Cable Gland

     

     

     

     

     

    Hawke ICG 653/Universal Cable Gland

     

     

     

     

    Application

     

    • Outdoor or indoor use.
    • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’

       elastomer and plastic insulated cables.
    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape

        bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or

        containing an ignition source in a Zone 1 area and exceeding 2 litres in

        volume.

     

     

    Features

     

    • Provides a barrier seal between the individual insulated cores within the

      cable and prevents entry of the products of an explosion into the cable.
    • Assembly of the cable gland compresses and distributes the compound

      evenly to create a barrier seal at the point of entry into the enclosure.
    The compound chamber may be separated from the cured compound to

       ensure that the chamber has been effectively filled. If required, external voids

       can be repaired.
    Provides armour clamping, using one clamping arrangement for all

      armour/braid types.
    Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    • Provides a cable retention and low smoke and fume, zero halogen seal onto

      the cables outer sheath.

     

     

    Materials & Finishes

     

    • The ICG 653/Universal cable gland is manufactured in Brass (standard), 

       Nickel Plated Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

     

    • Exd IIC Gb, Exe II Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    IECEx Certificate No. IECEx BAS 06.0015X.
    • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    • Suitable for use in Gas Groups IIA, IIB and IIC.
    • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

      60529 and NEMA 4X.
    Deluge protection to DTS01.
    • Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

     

    보다 상세한 자료는 첨부된 파일 3개를 확인하시기 바랍니다.

     

    Hawke 호크 ICG653 Universal 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 ICG653 Universal 조립도 01.pdf

     

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Hawke 501453Universal Cable Glands 제품사양  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    by TIATIP

    카테고리

    TI Story (947)
    TIA (92)
    TIP (194)
    TIEx (591)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)