파나소닉 Panasonic UV-Curing Systems, ANUP5256 Series 단종소식

 

안녕하세요  TIATIP 입니다.

 

오늘은 Panasonic UV -Curing Systems 가운데 ANUP5256 LAMP Area 경화기의 단종소식을 전합니다. 현재는 사용목적에 맞는 대체품이 없는 상황이지만, Spot 조사의 경우에는 ANUP50(UP50) 시리즈로 대안이 가능할 수 있겠습니다.

 

 

 

파나소닉 UV경화기/UV조사기

 

  

UV-Curing system Pana Cure Spot type ANUP5256 (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

 

 

 

 Panasonic UV Curing Systems

 

(1) Discontinued Product

 

ANUP5256, Last Time Buy : August 31, 2010 To be discontinued

 

 

 

 

파나소닉 UV경화기/UV조사기

 

 

(2) Recommended substitute

 

Sorry, no suggested alternative products.
250W UV-Curing System (Direct Radiation Type). Lamp for exchange: ANUPS252, which manufacture will be continued. * : Instead of Direct Radiation Type, we offer 1.5kW Straight Lamp type UV Cuing Systems or the combination with 200W: ANUP50 and ø8mm Light guide: ANUP5081.
 

 

 

 

 

파나소닉 UV경화기/UV조사기

 

 

 

(3) Remark

 

ANUP50, Aicure UP50 LAMP Spot Type UV Curing Systems

 

  

 

 

 

Panasonic Nais IDK Aicure LAMP Spot UP50 EN 01.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

  

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Panasonic, Lamp Spot Type, UV Curing System, Aicure UP50

 

 

안녕하세요 TIATIP 입니다.

 

오늘은 Panasonic의 UV경화기 가운데 LAMP 타입으로서는 가장 최신의 모델이며, 그 성능과 안정성을 자랑하는 UP50을 살펴봅니다. UP50은 MUV5204 및 ANUP5204의 진화된 사양이자 경화시스템과 관련하여 램프타입이 갖추어야할 모든 솔루션을 포함하고 있는 Compact 타입의 UV LAMP경화기입니다.

 

기존의 MUV5204, ANUP5204에서 제공하지 않았던 기능이 추가되었는데요, 바로 UV센싱인터페이스 기능입니다. UV센서를 옵션으로 선택하시면 보다 안정적인 생산라인 운영이 가능합니다. UP50에 장착하는 UV LAMP는 지난 10년간 안정성입 입증된 

ANUPS204 모델이며, 구형의 MUV5204, ANUP5204와 공용이 가능한 사양입니다.

 

UP50 (ANUP50)

 

 

Featuring an energy-efficient mode, which cuts the power consumption by a maximum of 15% while the irradiation is off, and a high-accuracy auto-tuning function

 

 

1. High-efficiency UV irradiation

 

Eco mode reduces power consumption

The Eco mode cuts the standby power consumption by a maximum of 15% while the irradiation is off (the shutter is closed), contributing to the running costs (electricity charge). Compatible with a wide range of power supply voltages from 100 to 240 V AC for worldwide use.

 

Surface tackiness can be quickly eliminated

The development and adoption of our unique special mirror that allows for the
effective irradiation with short wavelengths enables the quick elimination of
surface stickiness caused during curing. The irradiation time can also be
reduced, decreasing the temperature rise of workpieces.

 

ANUP5001F heat ray cut filter prevents temperature rises in the irradiation unit.

The use of the filter is recommended especially for heat-sensitive workpieces.
You can reduce temperature rises in the irradiation unit by attaching a heat
reflecting filter depending on the type of workpiece.

 

 

2. Stable UV irradiation performance

 

UV auto control function automatically compensates for the UV intensity.

This function increases the electrical power applied to the lamp according to
the total irradiation time of the lamp to compensate for the UV intensity decrease, maintaining stable UV irradiation until the end of the lamp life.

 

Slim UV sensor (optional)
Significantly higher reliability for bonding and fixing. The UV sensor for measuring irradiation intensity enables auto-turning in high-accuracy.

The UV intensity can be relative measured* at the actual position by using the slim UV sensor. It can also automatically adjust the UV intensity to the preset level. Since the sensor only has 5 mm (0.2 in) thickness, which is similar to the workpiece, the intensity measurement is possible without removing the system from the production line, facilitating high-accuracy setting and in-line condition optimization. The UV intensity can be checked and adjusted at real time, enhancing the bonding and fixing reliability.

 

 

3. Stable UV irradiation performance

 

Programmable irradiation function
This function prevents curing distortion and enables high-quality precision bonding. The irradiation can be programmed to controls the irradiation power and time depending on the resin and curing appication, supporting high-quality and high-precision bonding with minimum cure shrinkage. In addition to the simple irradiation mode which irradiation is continuously performed at a constant intensity, up to 10 steps 10 patterns can be set. This includes the step-up mode which the intensity is changed over time and the interval mode which irradiation is performed at specified intervals.

 

Digital setting allows for consistency of set values from operator to operator.

The irradiation power can be finely set in the range of 0 to 100% in increments of 0.5%. The actual UV irradiation intensity is approximately proportional to the displayed value, making the setting work easier and more accurate.

 

Interchangeability with ANUP5204

The wavelength distribution (typical characteristics) of UP50 is identical to
ANUP5204, our existing model. The replacement lamp, the ANUPS204, is
also the same as that for the ANUP5204.

 

 

4. Easy to install

 

Can be placed either vertically or horizontally.

The unit can be placed in either a vertical position that makes the footprint smaller or a horizontal position that allows stacking other units.

 

Long life, quickly-attachable lamp, ANUPS204

The average lamp life is 3,000 hours(guaranteed life: 2,000 hours*). The lamp can be easily replaced with a single operation and does not require an optical axis adjustment. * Ratio to the initial UV intensity -- 80% or higher in vertical placement, 70% or higher in horizontal placement

 

Two lens unit models for short and long range converging

The two lens unit models, one for short range and the other for long range
converging, cover a variety of applications and work pieces.

 

 

Aicure UP50 Controller

 

 

 

 

 

 

 

Panasonic 파나소닉 경화기 UP50 EN 01.pdf

  

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (949)
TIA (92)
TIP (194)
TIEx (593)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)