Killark, 킬락, PETRO BRIGHT, KF1L Series LED FLOODLIGHT

 

안녕하세요 TIATIP 입니다.

 

오늘은  PETRO BRIGHT, KF1L시리즈 LED Floodlight 을 신규 브로슈어와 함께 간단히 소개드립니다.

 

 

 

 

KILLARK

Harsh & Hazardous Location CL1, Div. 1, Zone 1

LED Labor and Energy Saving Technology

Up to 95 Lumens Per Watt
• Harsh & Hazardous Duty
• L70 Value 150,000+ Hours
• Crisp White 5,000° Kelvin Light

 

Features & Ratings:
• Up to 95 Lumens per Watt
• 90W - 125W Models to 11,560 Lumens
• Crisp White 5000°Kelvin Light
• L70 150,000 + Hours
• Solder-LESS (Vibration Resistant) Board Connections
• World Voltage 120 – 277VAC 50/60Hz
• Instant On – even after brief power interruption
• Copper-Free Aluminum Housing with Powder Coating
• 316 Stainless Steel Fixture Fasteners & Yoke
• Uses KF Aluminum Flood Series Mounts & Slipfitter
• Compliances UL-8750, UL-844, NEMA 4X, cCSAus Certified
• IEC Ex Zone I and Zone 21 (IEX suffix)

 

Applications
LED KF1L Series Explosion-proof Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications include manufacturing plants, and certain chemical and
petrochemical processing facilities, sewage treatment plants, off-shore and
dockside installations, garages and storage facilities

 

Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598A
• UL-844 Standard for lighting fixtures for hazardous locations, Class I,
Division 1; Class II, Division 1; Class III
• CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous
locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66
• IEX suffix zone EN60079

 

 

Materials
• Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for
complete, uniform corrosion protection
• All external hardware - stainless steel
• Thermal shock and impact resistant extra heavy-duty glass lens
• High temperature silicone gasketing
• Trunnion heavy gauge 316 SS

 

 

LED Flood Features and Standards
• Factory Sealed Construction
• Two 3/4 NPT entries (see logic for other choices)
• Supplemental surge protection and looping terminals are standard
• Crisp White Light for Excellent Color Rendering - Chromaticity
5000 K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - 80,000 maintenance free hours to 70% initial lumens
• Ambient suitability -50°C to 55°C
• Instant On - Including after power interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections - Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of initial
Lumens - TM-21* & calculated

* LM-xx & TM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers.
For more information go to www.ies.org

 

 

 

 

 

Killark Catalog Number

KF1L, KF1L09030, KF1L10530, KF1L11030, KF1L12530, KFS-6,
KFCB, KFWB, K4040, K4041, KF1LG, VMSC10, KF1L-DARK, KF1L-DOOR

 

 

 

 

 

 

Original_SFKF1L.pdf

Original_SBKF1L.pdf 

Original_LED_Mini_CAT_Web.pdf

 

 

 

 

     

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark, 킬락, LED Floodlight, PETRO BRIGHT Series

 

안녕하세요 TIATIP 입니다.

 

오늘은 LED Floodlight의 인기브랜드, Killark의 PETRO BRIGHT 시리즈를 소개합니다.

 

 

KILLARK PETRO BRIGHT LED

 

Applications
LED Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.


Typical applications include manufacturing plants, and certain chemical and
petrochemical processing facilities, sewage treatment plants, off-shore and
dockside installations, garages and storage facilities

 

 

Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598
• UL-844 Standard for lighting fixtures for hazardous locations, Class I,
Division 2; Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous
locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66

 

Materials
• Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for
complete, uniform corrosion protection
• All external hardware - stainless steel

• Thermal shock and impact resistant glass lens
• High temperature silicone gasketing
• Trunnion heavy gauge galvanized steel with painted finish

 

 

LED Flood Features and Standards
• Crisp White Light for Excellent Color Rendering - Chromaticity 5000° K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - 80,000 maintenance free hours to 70% initial lumens
• Ambient suitability -40°C to 55°C
• Instant On - Including after power interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections - Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of initial Lumens

* LM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to www.ies.org

 

 

Killark Catalog Number

KFL06030, KFL07030, KFL07530, KFL08530, KFL09030, KFL10530, KFL11030, KFL12530, KFS-6, KFCB, KFWB, K4040, 4041, KFLG, VMSC10, KFL-DARK,
KFL-DOOR

 

 

 

 

 

SBKFL09-12.pdf

Original_LED_Mini_CAT_Web.pdf

 

 

     

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark, 킬락, LED Technology for Harsh and Hazardous Environments, V & VSL Series

 

안녕하세요 TIATIP 입니다.

 

Killark, 킬락에서 새롭게 선보이는 Low Voltage Vapor Tight 타입의 조명제품군 V시리즈와 VSL시리즈를 소개합니다.

 

 

KILLARK® is pleased to announce LOW WATTAGE “Vapor Tight” LED labor
and energy saving luminaires. Sized to replace “utility” type incandescent or
CFL’s, the VSL Series provides exceptionally long life with numerous mounting options and the industry’s broadest COLOR globe offering for Hazardous Locations in both glass and polycarbonate. The VSL utilizes time-tested industrial grade components, and offers an upgrade path for existing installations in 1000’s of locations worldwide. Market demand for this clean white light is growing exponentially, and Killark’s VSL fits the bill for wet, corrosive and NEMA 4 locations that are classified as Class I Division 2; Class II Division 2.  

 

 

 

Key Features and Benefits
• L70 60,500 hours life at up to 55°C (5+ years to 70% of initial output)
equals Minimal Maintenance.
• LM79-08 Certified Photometrics Tested (NIST Recognized Lab)
• LM80-08 Lumen Maintenance Measurement
• Solder-LESS LED Board Connections - Vibration Resistant
• Less than 13 Watts of Power for VSL1330, less than 16 Watts for VSL1630
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Crisp white light - 5000°K (CCT);70 CRI
• Wide variety of optics, including Glass Globes, (Standard, Tempered,
Color) plus polycarbonate (Clear and Color)
• Optional Mounting arrangements, including Pendant, Wall, Ceiling,
Stanchion and adapters
• Copper-Free Aluminum Construction with electrostatically applied
epoxy/polyester powder paint for corrosion resistance
• Traditional Industrial Appearance, Superior Performance

 

 

V SERIES LED

 

Introduction
Killark ‘VSL’ Series LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4
areas where wind, water, snow or high ambients can be expected. VSL’s are sized to replace “Utility” type fixtures (incandescent or CFL’s) in
hallways, closets, elevator pits, docks, stairwells, access tunnels, and mechanical rooms. These fixtures can be used in locations made hazardous
by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and
certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, and garage areas.

 

 

 

 

LED Luminaire Features and Standards
• Compact in Size with Traditional Industrial Appearance and Suitability
• Wide variety of optics including glass globes (clear and tempered, color) plus polycarbonate globes in clear and colors
• Optional Mounting arrangements including Pendant, Wall, Ceiling, Stanchion and Adapters
• Fixtures available unit packed, order option CP
• VSL LED Housings can be retrofitted to existing V Series splice boxes; upgrade from CFL or incandescent
• Energy Savings - less than 13 Watts of Power; less than 16 Watts for VSL1630. Replaces 75W or higher incandescent
• Long Life - 60,500+ maintenance-free hours to 70% initial lumens
• Crisp White Light for Excellent Color Rendering - Chromaticity 5000°K (CCT); 70 CRI
• Integral driver - maintains fixture’s compact profile to fit in existing spaces
• Ambient suitability -40°C to 55°C

• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections – Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
• TM-21* method to project long term lumen maintenance
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens

 

Compliances
• UL-8750 for LED lighting
• UL 1598 standard for luminaires
• UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Division 2; Class III, Division 2
• CSA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4

 

Materials
• Body, splice box and guards are corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection
• Reflectors - Polypropylene for pendant or ceiling applications
• Heavy-duty silicone gasketing for NEMA 4 requirements

* LM-xx & TM-21 are Illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to www.ies.org
①When mounted (globe down) to V series boxes; not Class II, iv. 2 or NEMA 4 on VBA, VFPS, VB or VFL adaptors to sheet etal boxes.
②Glass globe models to 55°C; Polycarbonate suitable to 40°C.

 

 

   

 

Killark Catalog Number

VSL1330A1SG, VSL1330A1HG, VSL1330A1PN, VSL1330A2SG, VSL1330A2HG, VSL1330A2PN, VSL1630A1SG, VSL1630A1HG, VSL1630A1PN, VSL1630A2SG, VSL1630A2HG, VSL1630A2PN, VSL1330F1SG, VSL1330F1HG, VSL1330F1PN, VSL1330F2SG, VSL1330F2HG, VSL1330F2PN, VSL1630F1SG, VSL1630F1HG, VSL1630F1PN, VSL1630F2SG, VSL1630F2HG, VSL1630F2PN,

VSL1330X1SG, VSL1330X1HG, VSL1330X1PN, VSL1330X2SG, VSL1330X2HG, VSL1330X2PN, VSL1630X1SG, VSL1630X1HG, VSL1630X1PN, VSL1630X2SG, VSL1630X2HG, VSL1630X2PN,

VSL1330C1SG, VSL1330C1HG, VSL1330C1PN, VSL1330C2SG, VSL1330C2HG, VSL1330C2PN, VSL1630C1SG, VSL1630C1HG, VSL1630C1PN, VSL1630C2SG, VSL1630C2HG, VSL1630C2PN,

VSL1330H1SG, VSL1330H1HG, VSL1330H1PN, VSL1330H2SG, VSL1330H2HG, VSL1330H2PN, VSL1630H1SG, VSL1630H1HG, VSL1630H1PN, VSL1630H2SG, VSL1630H2HG, VSL1630H2PN,

VSL1330D1SG, VSL1330D1HG, VSL1330D1PN, VSL1330D2SG, VSL1330D2HG, VSL1330D2PN, VSL1630D1SG, VSL1630D1HG, VSL1630D1PN, VSL1630D2SG, VSL1630D2HG, VSL1630D2PN,

VSL1330RASG, VSL1330RAHG, VSL1330RAPN, VSL1630RASG, VSL1630RAHG, VSL1630RAPN, VSL1330SASG, VSL1330SAHG, VSL1330SAPN, VSL1630SASG, VSL1630SAHG, VSL1630SAPN,

VSL1330W1SG, VSL1330W1HG, VSL1330W1PN, VSL1330W2SG, VSL1330W1HG, VSL1330W2PN, VSL1630W1SG, VSL1630W1HG, VSL1630W1PN, VSL1630W2SG, VSL1630W2HG, VSL1630W2PN,

VSL1330V1SG, VSL1330V1HG, VSL1330V1PN, VSL1330V2SG, VSL1330V1HG, VSL1330V2PN, VSL1630V1SG, VSL1630V1HG, VSL1630V1PN, VSL1630V2SG, VSL1630V2HG, VSL1630V2PN,

VSL1330FLSG, VSL1330FLHG, VSL1330FLPN, VSL1630FLSG, VSL1630FLHG, VSL1630FLPN, VSL1330D4SG, VSL1330D4HG, VSL1330D4PN, VSL1630D4SG, VSL1630D4HG, VSL1630D4PN, VSL1330, VSL1630, VGA-1, VGA-2, VGH-1, VGH-2, VGC01, VGC-2, VGX-1, VGX-2, VXA-1, VXA-2, VBC-1, VBC-2, VXAB, VBA, VFPS, VB-1, VB-2, VFL, VD-4

 VCG-100, VCGP-100, VPLCG-100, VAMG-100, VAMGP-100, VPLCG-100A, VBG-100, VBGP-100, VRG-100, VRGP-100, VPLCG-100R, VRSG-100 G, VPLCG-100G, VPG-100, VGG-100, VGGP-100, VWG-100, VWGP-100, VPLCG-100W, VAG-100, VAG-100R, VTG-S, VTGG1-S, VPRSD-100, VSL1330, VSL1630,

 

 

 

 

 

 

MCVLED.pdf

Original_LED_Mini_CAT_Web.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)