RMGZ100B Force Measuring Roller 새모델 소개

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 그 동안 많은 사랑을 받았던 RMGZ100A Series 를 대신하여 FMS에서 새롭게 출시된 RMGZ100B Series 를 소개드리고자 합니다.

 

 

FMS

FMS Technology / FMS Force Measuring Systems

FMS Tension Control / Force Sensors

RMGZ / RMGZ100B Series

Force Measuring Roller

FMS force measuring rollers of the RMGZ100B series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

 

 

 

RMGZ 100 B Series

The RMGZ100B series force measuring roller is used to measure the tension in wire, cable and similar materials. An application specific sheave or pulley is
mounted to the two lifetime lubricated ball bearings.

 

 

 

 

Functional Description

The RMGZ100B series force measuring rollers works according to the dual flexion beam design. A quadruple foil type strain gauge mounted in a full Wheatstone bridge configuration performs the actual tension measurement.
This measuring principal ensures tension measurement with the highest accuracy also for low forces and at small wrap angles.

 

 

Features

10 times overload protection : No recalibration required 

20:1 force measuring range : Wide measuring capability

Nominal forces from 6 - 300 N :Sizes available for every application

Lifetime lubricated ball bearings : No maintenance necessary

 

 

Advantages

No recalibration required

Wide measuring capability

Covers perfectly the low application

No maintenance necessary

 

 

 

 

Technical Data & FMS CAT No.

FMS,RMGZ,RMGZ100B, RMGZ106B, RMGZ111B, RMGZ112B, RMGZ115B, RMGZ121B, RMGZ123B

FMS RMGZ100 A Spec IDK 단종.pdf

FMS RMGZ100 B Spec IDK 신규.pdf

FMS RMGZ100 Manual IDK.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ400/RMGZ600 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 에프엠에스 FMS의 Force Measuring Roller 가운데 RMGZ400과 RMGZ600 을 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ400/600 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

 

  Model : RMGZ400

 

 

RMGZ 400 and RMGZ 600  Series Force Measuring Roller

1. Nominal forces from 60 – 4000 N - Wide material processing range
2. 10 times overload protection - Recalibration is not required
3. 50 : 1 force measuring range - Wide measuring capability at high resolution
4. Lifetime lubricated ball bearings built-in - No maintenance necessary

 

 

RMGZ 400 and RMGZ 600

FMS force measuring roller RMGZ 400/600 series are used to measure the tension in wires, cables and narrow flat materials. An application specific sheave is mounted to the covering of the lifetime lubricated ball bearings.
A mounting hole with a key-way is required in the machine frame.
The key-way holds the position pin which prevents the sensor from twisting. The location of the position pin depends on the direction of force and the position of the red point.

 

 

Functional Description

The force measuring rollers RMGZ 400/600 work based on an enhanced bending beam principal. This ensures maximum accuracy and high measuring sensitivity. Four foiltype strain gauges configured in a full Wheatstone Bridge are utilized to measure the material tension. A mechanical hard stop ensures the highest overload protection and makes the sensor virtually indestructible. This combination provides highest accuracy and reliability without the need for recalibration.

 

 

RMGZ400, RMGZ600 Series

RMGZ400

RMGZ416B

RMGZ421B

RMGZ422B

RMGZ425B

RMGZ600

RMGZ631B

RMGZ632B

RMGZ634B

 

 

RMGZ400, RMGZ600 Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ400 RMGZ600 01.pdf

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS RMGZ800 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 RMGZ800 Force Measuring Roller 에 대해 알아보겠습니다.

 

FMS force measuring rollers of the RMGZ800 series are used to measure the tension in ropes, cables, wires and narrow web materials - made for higher forces and stability.

 

 

  Model : RMGZ800

 

RMGZ 800 Force Measuring Roller

1. Medium to high tension forces(100 – 8000 N) - Wide material processing range
2. 10 times overload protection - Recalibration is not required
3. Accuracy class 0.5 % - Wide measuring capability at high resolution
4. Lifetime lubricated ball bearings - No maintenance necessary

 

 

Functional Description

FMS force measuring roller RMGZ 800 series is used to measure the tension in wire, cable and narrow flat materials. An application specific sheave or pulley is mounted to the covering of the two lifetime lubricated ball bearings.
A mounting hole with a key-way is required in the machine frame. The key-way holds the position pin which prevents the sensor from twisting.
The location of the position pin depends on the direction of force and the position of the red point.

 

 

Measuring Principle
The force measuring rollers apply the force to the measuring web in a parallel plane as opposed to a typical bending beam. This ensures maximum accuracy and measuring sensitivity. Four foil-type strain gauges configured in a full Wheatstone Bridge are utilized to measure the material tension. A mechanical hard stop ensures the highest overload protection and makes the sensor virtually indestructible. This combination guarantees the highest accuracy and reliability without the need for recalibration.

 

 

RMGZ800 Series

RMGZ821

RMGZ822

RMGZ825

RMGZ831

RMGZ832

RMGZ834

RMGZ836

RMGZ838 

 

 

RMGZ800 Series Options

H14

H16

H18

H29

 

 

 

 

 

 

FMS 에프엠에스 RMGZ800 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ300 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 RMGZ300 Force Measuring Roller 에 관해 살펴보도록 하겠습니다.

 

The RMGZ 300 Series force measuring roller is used to measure the tension in wires, cables and similar materials. This dedicated measuring roller family was developed to work in rotating applications with high revolutions.

 

 

  Model : RMGZ300

 

 

RMGZ 300 Series Force Measuring Roller

1. Engineered to work in high revolution applications - Resistant against Centrifugal and Coriolis forces
2. 10 times overload protection - No recalibration required
3. 20: 1 force measuring range - Wide measuring capability
4. Nominal forces from 50 – 1000 N - Sizes available for every application

 

 

RMGZ300시리즈

The RMGZ 300 Series force measuring roller is used to measure the tension in wires, cables and similar materials.
This dedicated measuring roller family was developed to work in rotating applications with high revolutions. Its special design enables very effectively the compensation of centrifugal and coriolis forces. The sensor can accept a wide range of sheaves. The red point on the sensor body indicates the positive measuring direction.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required.

 

 

RMGZ300 SERIES

RMGZ315

RMGZ321

RMGZ322

RMGZ325

RMGZ331

 

 

RMGZ300 SERIES OPTIONS

H14

H21

 

 

 

 

 

 

FMS IDK RMGZ300 05.pdf

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ100 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

 

오늘은 FMS의 베스트셀러 아이템인 RMGZ100 시리즈를 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ100 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

   

 

Model : RMGZ100

 

 

RMGZ100 Force Measuring Roller

1. Nominal forces from 6N~300 N - Sizes available for every application

2. 10 times overload protection - No recalibration required

3. 20 :1 force measuring range - Wide measuring capability

4. Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ 100 Series force measuring roller is used to measure the tension
in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings

 

 

Functional Description

The RMGZ 100 Series force measuring rollers utilize the flexion beam priciple.
When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

RMGZ Series

RMGZ106A

RMGZ111A

RMGZ112A

RMGZ115A

RMGZ121A

RMGZ121.5A

RMGZ123A

 

 

RMGZ Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ900mini Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 RMGZ900mini Force Measuring Roller에 대해 알아보겠습니다.

 

The RMGZ900mini series sensors are designed as self contained cantilever mount sensors that minimise machine space requirements in narrow material processing applications.

 

 

  Model : RMGZ9000mini

 

 

RMGZ 900 mini Series Force Measuring Roller

Point 1. 10 times overload protection - Recalibration is not required
Point 2. 20 : 1 force measuring range - Wide measuring capability
Point 3. Parallel plane / double flexion beam design - Material position and measurement consistent
Point 4. Stainless steel sensor, anodised roller - Corrosion resistant, ultra-durable

 

 

Functional Description

The RMGZ 900 mini Series sensors are designed as self contained cantilever mount sensors that minimise machine space requirements in narrow material processing applications. They can be mounted horizontally or vertically directly to the machine frame. The red point on the base of the sensor indicates the positive measuring direction. Even with low material wrap angles, the design of the RMGZ 900 mini Series offers high accuracy measuring capability.

 

 

Measuring Principle
Foil type strain gauges mounted in a full Wheastone Bridge configuration perform the actual tension measurement. The dual flexion beam design ensures accurate measurement at any position on the roller while maintaining the parallel position of the material and eliminating angular deflection. A built in mechanical hard-stop provides high overload protection ensuring that recalibration is not required.

 

 

RMGZ900 mini Series

RMGZ912.100.40.E

RMGZ915.100.40.E

RMGZ921.100.40.E

RMGZ922.100.40.E

RMGZ915.150.40.E

RMGZ921.150.40.E

RMGZ922.150.40.E

RMGZ915.200.40.E

RMGZ921.200.40.E

RMGZ922.200.40.E

 

 

RMGZ900 Series Options

H14

H29

 

 

RMGZ900 Series Mounting Flange

RMGZ900.581699

RMGZ900.582185

 

 

 

 

 

 

FMS 에프엠에스 RMGZ900mini 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ900 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 RMGZ900 Force Measuring Roller 에 대해 살펴보겠습니다.

 

The RMGZ900 series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications.

 

 

   Model : RMGZ900

 

 

RMGZ 900 Series Force Measuring Roller

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring capability
3. Nominal forces from 50 – 1000N - Sizes available for every application
4. Stainless steel sensor, anodised roller -Corrosion resistant, ultra-durable

 

 

RMGZ900

The RMGZ 900 Series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications.
They can be mounted horizontally or vertically directly to the machine frame. The red point on the base of the sensor indicates the positive measuring direction. Even with low material wrap angles, the design of the RMGZ 900 Series offers high accuracy measuring capability.

 

 

Functional Description
Foil type strain gauges mounted in a full Wheastone bridge configuration perform the actual tension measurement. The dual flexion beam design ensures accurate measurement at any position on the roller while maintaining the parallel position of the material and eliminating angular deflection. A built in mechanical hard-stop provides high overload protection ensuring that frequent calibration is not required

 

 

RMGZ900 Series

RMGZ915

RMGZ921

RMGZ922

RMGZ925

RMGZ928

RMGZ931

 

 

RMGZ900 Series Options

H12

H14

H15

H16

H18

 

 

RMGZ900 Series Mounting Flange

RMGZ900.581699

RMGZ900.582185

 

 

 

 

FMS 에프엠에스 RMGZ900 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

안녕하세요 TIATIP 입니다

 

오늘은 잉곳(ingot)과 사파이어(sapphire) 제조공정에서 사용되는

Ingot Multi Wire Saw와, Sapphire Multi Wire Saw 장비에서 사용되어지고 있는 FMS(에프엠에스)의 Force Measuring Roller를 소개합니다.

 

Force Sensor를 활용한 Tension Control에는 다양한 라인업이 갖추어져 있지만,

해당 어플리케이션의 베스트셀러인 RMGZ100시리즈와 EMGZ306A시리즈 콤비네이션으로 구성하였습니다.

 

 

1. RMGZ 100 Series

 

RMGZ100 시리즈는 Force Measuring Roller 입니다.

장비메카니즘에 따라 특수제작이 가능합니다.

 

 

   

 

Nominal forces from 6~300 N - Sizes available for every application
10 times overload protection - No recalibration required
20 : 1 force measuring range - Wide measuring capability
Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ100 Series force measuring roller is used to measure the tension in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings.

 

 

Functional Descriptions

The RMGZ100 Series force measuring rollers utilize the flexion beam priciple. When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

 

 

2. EMGZ306A Series

 

EMGZ306A 시리즈는 RMGZ 100과 함께 구성되는 Tension Measuring Amplifier 입니다.

 

 

No programming required - Easy to setup
Standardised analogue outputs - Multiconnectable with PLC, Display etc.
Galvanically isolated - Protected against electrical noise
DIN rail mount - Easy to mount in cabinet
Gain and offset setting by 20-turn trimmers - Precise adjustment guaranteed

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

FMS 에프엠에스 EMGZ306A 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)