RTMX42 Wireless Multi-channel Tension Control, System Overview

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Tension Contrl을 위한 무선시스템에 대해 전반적으로 살펴보도록 하겠습니다.

 

The FMS RTM system (radio transmitted tension monitoring system) is the first tension measurement system for rotating applications which doesn't require any sliprings. Find information about applications of the RTM system.

 

 Model : RTMX42

 

 

The RTMX42 utilizes force sensors to measure the tension of individual wires or strands, and transmits this data wirelessly from the rotating to the static part of the machine. The new RTMX42 series is available in 5 variants for pure monitoring solutions or for tension control via a PLC. A sophisticated range of interface options allows a quickly and efficiently integrations into the existing communication and control infrastructure of the stranding machine. RTMX42 is primarily suitable for Cage or Tubular Stranders.

 

 

 

 

FMS 에프엠에스 RTMX42 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RTM 01/02 Radio Transmitted Tension Monitoring System (multi-channel)

 

안녕하세요 TIATIP 입니다.

 

오늘은 FMS의 제품 가운데 Roating Machinery Application과 같은 무선환경에 적합한 RTM Radio Transmitted Tension Monitoring System 을 알아보도록 하겠습니다.

 

 

  

RTM Radio Transmitted Tension Monitoring System for Rotating Machinery Applications

 

 

RTM System

The FMS Radio Transmitted Tension Monitoring System (RTM) is designed to monitor tension of individual wires or cables in rotating applications. This system sends all the collected data via radio transmission and operates on battery power so that it does not require slip rings. The RTM System is a complete tension monitoring package designed to easily retrofit onto older machines. It is ideal for upgrading existing machinery to state-of-the-art tension measuring technology.

 

 

Functional Description

All individual tension sensor (load cells) data is collected over a BUS system mounted on the rotating portion of the machine. A dedicated unit on the bus system transmits the information over radio frequency to a PC near the machine. A Bluetooth® USB stick receives the tension data on the operator side. Values of all of the individual tension sensors can be monitored real-time on the screen.


They can also be viewed in a continuous rolling screen format and can be stored on a hard-disk. Power options: For machines without 24 V supply on the rotating portion of the machine, the RTM offers a power pack that keeps the whole system running for one full shift utilizing battery power. The battery power pack voltage can be monitored on the screen and a warning is displayed when the battery power gets too low. The battery pack can then simply be exchanged for a fully charged one within seconds. A battery charger is included with the RTM System.

 

 

Sensors & Amplifiers:

The new FMS EMGZ480 Bus system amplifiers were designed specifically to be utilized in rotating applications. The amplifiers are all linked over a BUS system. They provide excitation voltage to the sensors and convert the output signal into digital values. Tension sensors (load cells) for any application can be chosen from the wide range of standard FMS sensors designed specifically for the wire and cable industry. FMS offers years of experience utilizing tension sensors in rotating applications and most are designed to not be affected by centrifugal or coriolis forces. Therefore only the true tension value is measured.

 

 

 

 

 

FMS 에프엠에스 RTM Radio Tx 01.pdf

FMS 에프엠에스 RTM Radio Tx 02.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)