Panasonic, Lamp Spot Type, UV Curing System, Aicure UP50



안녕하세요 TIATIP 입니다.


오늘은 Panasonic의 UV경화기 가운데 LAMP 타입으로서는 가장 최신의 모델이며, 그 성능과 안정성을 자랑하는 UP50을 살펴봅니다. UP50은 MUV5204 및 ANUP5204의 진화된 사양이자 경화시스템과 관련하여 램프타입이 갖추어야할 모든 솔루션을 포함하고 있는 Compact 타입의 UV LAMP경화기입니다.


기존의 MUV5204, ANUP5204에서 제공하지 않았던 기능이 추가되었는데요, 바로 UV센싱인터페이스 기능입니다. UV센서를 옵션으로 선택하시면 보다 안정적인 생산라인 운영이 가능합니다. UP50에 장착하는 UV LAMP는 지난 10년간 안정성입 입증된 

ANUPS204 모델이며, 구형의 MUV5204, ANUP5204와 공용이 가능한 사양입니다.


UP50 (ANUP50)



Featuring an energy-efficient mode, which cuts the power consumption by a maximum of 15% while the irradiation is off, and a high-accuracy auto-tuning function



1. High-efficiency UV irradiation


Eco mode reduces power consumption

The Eco mode cuts the standby power consumption by a maximum of 15% while the irradiation is off (the shutter is closed), contributing to the running costs (electricity charge). Compatible with a wide range of power supply voltages from 100 to 240 V AC for worldwide use.


Surface tackiness can be quickly eliminated

The development and adoption of our unique special mirror that allows for the
effective irradiation with short wavelengths enables the quick elimination of
surface stickiness caused during curing. The irradiation time can also be
reduced, decreasing the temperature rise of workpieces.


ANUP5001F heat ray cut filter prevents temperature rises in the irradiation unit.

The use of the filter is recommended especially for heat-sensitive workpieces.
You can reduce temperature rises in the irradiation unit by attaching a heat
reflecting filter depending on the type of workpiece.



2. Stable UV irradiation performance


UV auto control function automatically compensates for the UV intensity.

This function increases the electrical power applied to the lamp according to
the total irradiation time of the lamp to compensate for the UV intensity decrease, maintaining stable UV irradiation until the end of the lamp life.


Slim UV sensor (optional)
Significantly higher reliability for bonding and fixing. The UV sensor for measuring irradiation intensity enables auto-turning in high-accuracy.

The UV intensity can be relative measured* at the actual position by using the slim UV sensor. It can also automatically adjust the UV intensity to the preset level. Since the sensor only has 5 mm (0.2 in) thickness, which is similar to the workpiece, the intensity measurement is possible without removing the system from the production line, facilitating high-accuracy setting and in-line condition optimization. The UV intensity can be checked and adjusted at real time, enhancing the bonding and fixing reliability.



3. Stable UV irradiation performance


Programmable irradiation function
This function prevents curing distortion and enables high-quality precision bonding. The irradiation can be programmed to controls the irradiation power and time depending on the resin and curing appication, supporting high-quality and high-precision bonding with minimum cure shrinkage. In addition to the simple irradiation mode which irradiation is continuously performed at a constant intensity, up to 10 steps 10 patterns can be set. This includes the step-up mode which the intensity is changed over time and the interval mode which irradiation is performed at specified intervals.


Digital setting allows for consistency of set values from operator to operator.

The irradiation power can be finely set in the range of 0 to 100% in increments of 0.5%. The actual UV irradiation intensity is approximately proportional to the displayed value, making the setting work easier and more accurate.


Interchangeability with ANUP5204

The wavelength distribution (typical characteristics) of UP50 is identical to
ANUP5204, our existing model. The replacement lamp, the ANUPS204, is
also the same as that for the ANUP5204.



4. Easy to install


Can be placed either vertically or horizontally.

The unit can be placed in either a vertical position that makes the footprint smaller or a horizontal position that allows stacking other units.


Long life, quickly-attachable lamp, ANUPS204

The average lamp life is 3,000 hours(guaranteed life: 2,000 hours*). The lamp can be easily replaced with a single operation and does not require an optical axis adjustment. * Ratio to the initial UV intensity -- 80% or higher in vertical placement, 70% or higher in horizontal placement


Two lens unit models for short and long range converging

The two lens unit models, one for short range and the other for long range
converging, cover a variety of applications and work pieces.



Aicure UP50 Controller








Panasonic 파나소닉 경화기 UP50 EN 01.pdf



내 기술지원 및 구매상담처




댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Panasonic UV Curing System, Aicure, ANUP5204


안녕하세요 TIATIP 입니다.


오늘은 Panasonic의 UV경화기 시리즈 가운데 LAMP타입인 ANUP5204를 살펴봅니다. 과거 카메라모듈과 광픽업 및 광학렌즈분야의 붐과 더불어 큰 성장을 보인 제품입니다. 최근 신모델인 UP50시리즈가 출시되어 사랑받고 있지만 익숙함과 그 안정성으로 신모델과 함께 UV LAMP Spot 경화기의 자존심을 지키고 있습니다.


UV calibration and irradiation pattern functions deliver
high-quality adhesion and curing.



Aicure ANUP5204


⊙ High power: 4000 mW/cm2
⊙ Automatic compensation for decay in UV intensity
⊙ Superb UV irradiation prevents distortion
⊙ Universal power supply and 40% more energy efficient
⊙ Digital settings eliminate individual variation
⊙ Can be placed vertically or horizontally



High UV intensity: 4000mW/cm2
Even with a 200 W lamp, the ANUP5204 achieves a high intensity of 4000 mW/cm2 for multiple-branch-fiber and long distance irradiation. (4000 mW/cm2 is the initial power using 1-branch-fiber (ø5 mm) without lens, without filter, and with Auto-control set to OFF and distance set to 10mm.)


Surface tacking removed for quicker curing
Quick, clean tacking by short wavelengths using a special mirror developed for efficient irradiation. As result, ANUP5204 achieves short irradiation time (short tact time) and reduced heat increase.


Universal power supply and 40% more energy efficient
Features universal power source compatibility between 100 and 240 VAC. It is a whopping 40%+ more energy efficient than our conventional model 1) This will cut electricity bills at your factory.


Automatic compensation for decay of UV intensity
The built-in UV auto-control function automatically compensates for UV intensity decay, so stable UV intensity is maintained until the end of the lamp’s life. Set vertically, the ANUP5204 undergoes almost not decrease in UV intensity.


Superb UV irradiation prevents distortion
The programmable irradiation function is matched to the resin and curing material. This greatly reduces shrinking and distortion of the resin when curing. This function is the best match for optical components. Set 9 patterns of 10 steps each. UV power (shutter open rate) = 0-100% (0.5% unit), irradiation time = 0.1-100sec. (0.1sec. unit)/100-9999 sec. (1 sec. unit).


Digital settings eliminate individual variation
Use sheet switches to set and display each value. Fine tune values from 0 to 100% in 0.5% increments. Nearly perfect symmetry between display and UV irradiation intensity facilitates setup.


Can be stood up or laid on side
Vertical placement: stand up to save foot space.
Horizontal placement: lay on side to allow stacking.
Vertical placement can reduce decreases in UV intensity.


Long-life lamp featuring one-touch replacement
Even with a 200 W lamp, the lamp will provide a high 4000 mW/cm2 output1).
On top of that, it delivers a long 3000 hours of life 2) (guaranteed lifetime: 2000 hours) 3). The “one touch” replacement method does not require optical axis alignment.
1): Initial data
2): 3,000 hours is maximum time of use.
3): Minimum 70% of initial UV intensity.


Diverse range of filters and lenses for practically any application
Two types of heat-ray-cut-filter are available Only UV rays penetrate. Four lenses are also available to match the application at hand: the “AS/A” lens focuses short range, the UV lens is used for irradiation, and the “BS/B” lens focuses long range.


Easy connection
Very easy to connect with a foot-switch for UV irradiation.
Only open-collector(Tr) or relay-contact.
Change UV intensity using PLC
Using pattern No. 9, change the UV intensity from 4-power via a PLC for optimum irradiation in each production run.
Supports UV optical feedback
Freely change the UV irradiation intensity from external devices. Combine UV sensors and PLC to support UV control by optical feedback.










Panasonic 파나소닉 경화기 ANUP5204 EN 01.pdf



내 기술지원 및 구매상담처





댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

BLOG main image
공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP


TI Story (971)
TIA (98)
TIP (194)
TIEx (608)
TIS (36)
TiNoTe (10)
TIO (23)
The OtherS (1)