파나소닉 Panasonic UV-Curing Systems, ANUP5203 Series 단종소식

 

안녕하세요  TIATIP 입니다.

 

오늘은 Panasonic UV -Curing Systems 가운데 ANUP5203 LAMP Spot 경화기의 단종소식을 전합니다. 대체품으로는 현재 시판되고 있는 ANUP50(UP50) 시리즈를 검토하시면 되겠습니다.

 

 

 

 

파나소닉 UV경화기/UV조사기

Panasonic PanaCure Sopt Type ANUP5203L

 

 

 

 

파나소닉 UV경화기/UV조사기

Panasonic PanaCure Sopt Type ANUP5203K

 

 

UV-Curing system Pana Cure Spot type ANUP5203 (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

 

 

 Panasonic UV Curing Systems

 

(1) Discontinued Product

 

ANUP5203K, Last Time Buy : October 1, 2003 To be discontinued

ANUP5203L, Last Time Buy : October 1, 2003 To be discontinued 

 

 

 

 

 

(2) Recommended substitute

 

ANUP50, Aicure UP50 LAMP Spot Type UV Curing Systems

 

 

 

 

 

 

(3) Remark

 

200W UV-Curing System with Fiber Switching function. We offer the ANUP50, due to discontinuation of ANUP5203K. Fiber Switching function is not equipped with ANUP50. Lamp for exchange: ANUPS203 , which will be continued manufacturing. ANUP5023 and ANUP50 lamp is not compatible. ANUP5203K and ANUP50 fiber is not compatible.

  

 

 

 

 

Panasonic Nais IDK Aicure LAMP Spot UP50 EN 01.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

  

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RUVIX UV LED Curing System

 

안녕하세요 TIATIP 입니다.

 

오늘은 그 간의 해외 유수의 UV경화기 메이커와 무수히 많은 TBE를 거치고 현장테스트 및 품질적합도 검증을 위해 고객의 니즈반영 및 R&D를 지속해온 순수 국내기술의 RUVIX UV LED 경화기를 살펴보겠습니다.

 

 

  Controller : D Series  (Equipment Only)   

 

 

RUVIX의 라인업은 기존의 UV 램프타입과 인라인타입, 컨베이어타입, 오븐타입, 챔버타입 등 오랜시간에 걸쳐 획득한 다양한 필드경험과 노하우 그리고 해외 선진기술를 기반으로 새롭게 각광받는 UV LED경화기를 앞서 개발하고 여러상황별 까다로운 어플리케이션에 적합하도록 컨트롤러와 헤드의 라인업을 개발하고 해당 시스템의 안정화작업을 겨처 국내 대기업에 안정적인 공급을 하고 있습니다.

 

RUVIX루비스 의 하드웨어 구성(Hardware Configuration)은 다음과 같이 표현될 수 있습니다. 이외에도 현장중심의 고객요구사항을 반영한 다양하고 특수한 하드웨어 구성 및 추가구성이 가능하여 각 하드웨어 구성을 기준으로 소프트웨어 구성(Software Configuration) 및 통신구성(Communication Interface)을 제공합니다.

 

 

RUVIX 루비스는 범용의 UV LED경화기 (UV LED조사기)부터 고객요청에 의한 연구개발의 특주사양에 이르기까지 지원합니다.

 

 

Controller : R Series + LED Bar Combination 

 

무엇보다 다양한 라인조건에 대하여 범용 및 특주타입의 헤드유닛(HEAD UNIT)을 위와 같이 맞춤개발하고 이의 안정성을 지원하는 맞춤 컨트롤러(Controller)를 함께 공급하여 품질관리 및 고객편의성을 제공하고 있습니다.

 

 

 

 

RUVIX 루비스 UV LED경화기 01.pdf

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고

'TIS > RUVIX' 카테고리의 다른 글

국내 UV LED 경화기의 선두주자 루비스 제품군 구성개요  (0) 2013.01.04
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Panasonic, LED Spot Type, Aicure UV Curing System UJ30/UJ35 Series

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 최근 UV Curing System과 관련하여 많은 관심과 사랑을 받고 있는 Panasonic의 차세대 UV LED경화기인 UJ30(ANUJ30) 시리즈와 UJ35(ANUJ35) 시리즈를 함께 살펴보도록 하겠습니다.

 

 

 

 

Most important features

 

Panasonic LED UV systems are very compact, have lower energy consumption than lamp systems and advanced features compared to other LED UV systems.

 

 

Temperature feedback for stable irradiation

The Aicure is equipped with a temperature feedback controller originally developed by Panasonic. Its UV irradiation meets the industry’s highest
class of stability.

 

User-friendly interface

In addition to its user-friendliness, energy efficiency and being environmentally
friendly, these models have a high irradiation intensity power up to 8,600mW/cm2 (wavelength: 365nm). Or 9,200mW/cm2 (wavelength: 385nm)
and high irradiation accuracy of ±3%.

 

New slim UV sensor for intensity calibration

These new models provide outstanding performance for bonding and fixing with UV curable resin.

 

Two new controller selections (UJ30 and UJ35 Series)

 

 

 

Standard model UJ30(ANUJ30)

Limited to the most necessary and common functions. Provides highly reliable UV irradiation.

 

High performance model UJ35(ANUJ35)

A variety of functions provide more advanced UV irradiation solutions

 

 

 Aicure UJ35

 

 

Controller

UJ30, ANUJ3000, uj30, anuj3000, ANUJ30, anuj30

UJ35, ANUJ3500, uj35, anuj3500, ANUJ35, anuj35

 

Head

ANUJ6160, anuj6160

ANUJ6161, anuj6161

ANUJ6162, anuj6162

ANUJ6163, anuj6163

ANUJ6164, anuj6164

ANUJ6165, anuj6165

 

Connection Cable

ANUJ6220, anuj6220

ANUJ6250, anuj6250

ANUJ6200, anuj6200

ANUJ6230, anuj6230

ANUJ6270, anuj6270

 

Lens

ANUJ6423, anuj6423

ANUJ6424, anuj6424

ANUJ6426, anuj6426

ANUJ6428, anuj6428

ANUJ6420, anuj6420

ANUJ6450S, anuj6450s

ANUJ6475S, anuj6475s

ANUJ6426SV, anuj6426sv

ANUJ6428SV, anuj6428sv

ANUJ6420SV, anuj6420sv

ANUJ6447L, anuj6447l

ANUJ6467L, anuj6467l

 

Option

ANUJ3800, anuj3800

ANUJ6802, anuj6802

ANUJ6803, anuj6803

ANUJ6804, anuj6804

ANUP5001SG, anuj5001sg

 

 

 

 

 

 

Panasonic 파나소닉 경화기 UJ30 UJ35 KR 01.pdf

Panasonic 파나소닉 경화기 UJ30 UJ35 EN 01.pdf

Panasonic 파나소닉 경화기 Aicure UJ6170 01.pdf

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Panasonic Aicure UV Curing System UJ20 Series

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Panasonic의 UV LED경화기 UJ20 시리즈를 살펴보도록 하겠습니다. 최근 새로운 모델인 UJ30과 UJ35시리즈로 전환되고 있는 추세이나, 과거 대기업과 그 관계사를 위주로 여전히 잘 활용하고 계신 분들이 많은 것이 사실입니다.

 

 

 Aicure UJ20 Series, LED Spot Type

 

 

⊙ Most powerful intensity 8,000mW/cm2 in its class.
⊙ Easy operation, installation, energy efficiency and environmental friendliness in a compact size.
⊙ More reliable UV irradiation achieved by higher head-cooling efficiency.

 

 

Temperature feedback:

Provides excellent and stable UV irradiation performance


Fan-less controller:

No need for an exhaust process or vibration-proofing measures

Estimated light source life:
20,000 hours

 

Low running cost


LED for thermal distortion-less

UV irradiation for distortion-less

Easy UV meter

 

 

Most powerful 8,000mW/cm2
The high intensity of 8,000 mW/cm2 is possible by using the ANUJ6160 LED head and ANUJ6423 lens in power mode. Even in high accuracy mode, an intensity of 6,400 mW/cm2 is possible.

 

 

Estimated Light Source life length of 20,000 hours

With the LED system UV irradiation turns on instantly, only when it is needed. With a duty of 1/5 (process tact time is 5 and irradiation time is 1), the LED
system equates to 100,000 hours using the lamp system (approximately 33 or more times greater). This amounts to a great decrease in maintenance needed for lamp replacement and running cost.

Since achieving 8,000 mW/cm2, you can perform irradiation with the energy required for curing even if the irradiation output has been narrowed. By narrowing the set irradiation output, you can stretch the lightsource life even further. Sufficient power is available even for wide areas. For example, using lens: ANUJ6428 in a 5.5 mm diameter area (WD = 40 mm), an irradiation intensity on par with previous lamp systems is available: over 623 mW/cm2 in Power Mode and over 518 mW/cm2 in feedback Mode. Also, there is no drop in intensity caused by branching as seen in the lamp system.

Sufficient power is available even with special lenses. In addition to  five types of standard lens (3, 4, 6, 8, and 10 dia.), side view lens, cylindrical and rod lens are available to your UV application.

 

 

 

Controller

UJ20, ANUJ2000, uj20, anuj2000 

UJ30, ANUJ3000, uj30, anuj3000

UJ35, ANUJ3500, uj35, anuj3500

 

Head

ANUJ6160, anuj6160

ANUJ6161, anuj6161

ANUJ6162, anuj6162

ANUJ6163, anuj6163

ANUJ6164, anuj6164

ANUJ6165, anuj6165

 

Connection Cable

ANUJ6220, anuj6220

ANUJ6250, anuj6250

ANUJ6200, anuj6200

ANUJ6230, anuj6230

ANUJ6270, anuj6270

 

Lens

ANUJ6423, anuj6423

ANUJ6424, anuj6424

ANUJ6426, anuj6426

ANUJ6428, anuj6428

ANUJ6420, anuj6420

ANUJ6450S, anuj6450s

ANUJ6475S, anuj6475s

ANUJ6426SV, anuj6426sv

ANUJ6428SV, anuj6428sv

ANUJ6420SV, anuj6420sv

ANUJ6447L, anuj6447l

ANUJ6467L, anuj6467l

 

Option

ANUJ3800, anuj3800

ANUJ6802, anuj6802

ANUJ6803, anuj6803

ANUJ6804, anuj6804

ANUP5001SG, anuj5001sg

 

 

 

 

 

 

Panasonic 파나소닉 경화기 UJ20 EN 01.pdf

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Panasonic UV Curing System, Aicure, ANUP5204

 

안녕하세요 TIATIP 입니다.

 

오늘은 Panasonic의 UV경화기 시리즈 가운데 LAMP타입인 ANUP5204를 살펴봅니다. 과거 카메라모듈과 광픽업 및 광학렌즈분야의 붐과 더불어 큰 성장을 보인 제품입니다. 최근 신모델인 UP50시리즈가 출시되어 사랑받고 있지만 익숙함과 그 안정성으로 신모델과 함께 UV LAMP Spot 경화기의 자존심을 지키고 있습니다.

 

UV calibration and irradiation pattern functions deliver
high-quality adhesion and curing.

 

 

Aicure ANUP5204

 

⊙ High power: 4000 mW/cm2
⊙ Automatic compensation for decay in UV intensity
⊙ Superb UV irradiation prevents distortion
⊙ Universal power supply and 40% more energy efficient
⊙ Digital settings eliminate individual variation
⊙ Can be placed vertically or horizontally

 

 

High UV intensity: 4000mW/cm2
Even with a 200 W lamp, the ANUP5204 achieves a high intensity of 4000 mW/cm2 for multiple-branch-fiber and long distance irradiation. (4000 mW/cm2 is the initial power using 1-branch-fiber (ø5 mm) without lens, without filter, and with Auto-control set to OFF and distance set to 10mm.)

 

Surface tacking removed for quicker curing
Quick, clean tacking by short wavelengths using a special mirror developed for efficient irradiation. As result, ANUP5204 achieves short irradiation time (short tact time) and reduced heat increase.

 

Universal power supply and 40% more energy efficient
Features universal power source compatibility between 100 and 240 VAC. It is a whopping 40%+ more energy efficient than our conventional model 1) This will cut electricity bills at your factory.

 

Automatic compensation for decay of UV intensity
The built-in UV auto-control function automatically compensates for UV intensity decay, so stable UV intensity is maintained until the end of the lamp’s life. Set vertically, the ANUP5204 undergoes almost not decrease in UV intensity.

 

Superb UV irradiation prevents distortion
The programmable irradiation function is matched to the resin and curing material. This greatly reduces shrinking and distortion of the resin when curing. This function is the best match for optical components. Set 9 patterns of 10 steps each. UV power (shutter open rate) = 0-100% (0.5% unit), irradiation time = 0.1-100sec. (0.1sec. unit)/100-9999 sec. (1 sec. unit).

 

Digital settings eliminate individual variation
Use sheet switches to set and display each value. Fine tune values from 0 to 100% in 0.5% increments. Nearly perfect symmetry between display and UV irradiation intensity facilitates setup.

 

Can be stood up or laid on side
Vertical placement: stand up to save foot space.
Horizontal placement: lay on side to allow stacking.
Vertical placement can reduce decreases in UV intensity.

 

Long-life lamp featuring one-touch replacement
Even with a 200 W lamp, the lamp will provide a high 4000 mW/cm2 output1).
On top of that, it delivers a long 3000 hours of life 2) (guaranteed lifetime: 2000 hours) 3). The “one touch” replacement method does not require optical axis alignment.
1): Initial data
2): 3,000 hours is maximum time of use.
3): Minimum 70% of initial UV intensity.

 

Diverse range of filters and lenses for practically any application
Two types of heat-ray-cut-filter are available Only UV rays penetrate. Four lenses are also available to match the application at hand: the “AS/A” lens focuses short range, the UV lens is used for irradiation, and the “BS/B” lens focuses long range.

 

Easy connection
Very easy to connect with a foot-switch for UV irradiation.
Only open-collector(Tr) or relay-contact.
Change UV intensity using PLC
Using pattern No. 9, change the UV intensity from 4-power via a PLC for optimum irradiation in each production run.
Supports UV optical feedback
Freely change the UV irradiation intensity from external devices. Combine UV sensors and PLC to support UV control by optical feedback.

 

 

 

 

 

 

 

 

 

Panasonic 파나소닉 경화기 ANUP5204 EN 01.pdf

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

카테고리

TI Story (959)
TIA (92)
TIP (194)
TIEx (603)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)