호크 Hawke 501/453/Universal Cable Gland 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 501/453/Universal (이하, 501/453/UNIV) 시리즈에 대하여 살펴보겠습니다.

Cold Flow Characteristics 를 충족하는 대표적인 아이템으로 선박과 중공업 및 해상플랜트에 많이 적용되고 있습니다.

 

 

Hawke

Group II Hazardous Area

Flameproof Exd / Increased Safety Exe

Restricted Breathing ExnR / Dust Extb

Dual Certified ATEX - IECEx

 

 

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit 'cold flow' characteristics.

 

 

 

 

 

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has 'cold flow' characteristics.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

 

 

Materials & Finishes

The 501/453/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. 

 

 

1. Unique Rear Sealing System

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection.

The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

2. The Original Reversible Armour Clamp

The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accommodate all types of cable armour or braid. Unlike many of our competitors, the correct stamping orientation is marked clearly with the armour size and backed up by the presence of a groove in the component. Our RAC clamping system is also fully inspectable when positioned on the cable.

 

3. Zero Cable Damage

Our unique diaphragm sealing system does not damage cables which exhibit 'Cold Flow' characteristics. The diaphragm type seal is currently the only elastomeric seal to comply fully with IEC/EN 60079-14 and is therefore suitable on effectively filled 'cold flow' cables which would otherwise require barrier style cable glands. Our diaphragm seal is also unique in that it is the only flameproof elastomeric seal that can be visually inspected in operation - a real benefit to inspectors.

 

4.  Inspectable Deluge Seal

Our inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01. Indeed, our deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which prevents corrosion of the cable armour.

 

 

 

 

Technical Data

1.Exd IIC Gb, Exe IIC Gb, ExnR IIC Gc, Extb IIIC Db

2.Certificate No's : Baseefa06ATEX0057X and IECEx BAS 06.0014X for sizes Os - F.

3.Baseefa06ATEX0056X and IECEx BAS 06.0013X for sizes G - J.

4.Suitable for use in: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.

5.Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.

6.Ingress Protection: IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

7.Deluge Protection to: DTS01

8.Operating Temperature Range: -60°C to +80°C

9.Assembly Instruction Sheet: AI 300 (Sizes Os to F). AI 303 (Sizes G to J).

 

 

 

 

Hawke Accessories

for 501/453/Universal (501/453/UNIV) 

 

 

 

Installation Guide

for Hawke 501/453/Universal Series

 

 

 

Hawke Order Format [Gland Type/Size/Thread/Options/Materials]

 

Example without options :501/453/UNIV/C/M32

 

Example without options, Nickel Plated Brass :501/453/UNIV/C/M32 Nickel Plated Brass

 

Example with alternative clamping ring option : 501/453/UNIV/C/1-1/4"NPT/AR

 

501/453/UNIV/Os/M16

501/453/UNIV/Os/M20

501/453/UNIV/Os/NPT1/2"

501/453/UNIV/O/M16

501/453/UNIV/O/M20

501/453/UNIV/O/NPT1/2"

501/453/UNIV/A/M20

501/453/UNIV/A/NPT1/2"

501/453/UNIV/A/NPT3/4"

501/453/UNIV/B/M25

501/453/UNIV/B/NPT3/4"

501/453/UNIV/B/NPT1"

501/453/UNIV/C/M32

501/453/UNIV/C/NPT1"

501/453/UNIV/C/NPT1-1/4"

501/453/UNIV/D/M50

501/453/UNIV/D/NPT1-1/2"

501/453/UNIV/D/NPT2"

501/453/UNIV/E/M63

501/453/UNIV/E/NPT2"

501/453/UNIV/E/NPT1-1/2"

501/453/UNIV/F/M75

501/453/UNIV/F/NPT2-1/2"

501/453/UNIV/F/NPT3"

501/453/UNIV/G/M80

501/453/UNIV/G/NPT3-1/2"

501/453/UNIV/H/M90

501/453/UNIV/H/NPT3-1/2"

501/453/UNIV/J/M100

501/453/UNIV/J/NPT4 

 

 

 

Technical Data

 

501453Universal Spec IDK.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크케이블글랜드 라인업과 다운로드링크

 

안녕하세요 TIATIP 입니다.

Hawke(호크) 케이블글랜드 관련 자료를 다운로드할 수 있는 사이트링크를 요약해 드립니다.

 

 

 

Our Cable Glands cover the whole spectrum of armoured and non-armoured cable and applications from general industrial through increased safety, deluge, flameproof and explosion proof. The Cable Glands are available in Brass as standard with Stainless Steel and Aluminium, as an optional material on certain designs. The innovative design features included in the range make our Cable Glands the lowest lifetime cost solution.

 

 

Hazardous Area Cable Glands

Features

  • 501/414
  • 501/421
  • 501/423
  • 501/453/RAC
  • 501/453/RAC/L
  • 501/453/Universal
  • CSB 656N
  • ICG 623
  • ICG 653/Universal
  • ICG 653/Universal/L
  • PSG 553/RAC
  • SB 474
  •  

     

    Group 1 Mining

    Features

  • 453/RAC
  • 453/T
  • 453/Universal
  • 623
  • 653/T
  • 653/Universal
  •  

     

     

    North American Series Cable Glands

    Features

  • 153/X
  • 701
  • 710
  • 711
  • 713
  • 753
  • 755
  •  

     

    Industrial Cable Glands

    Features

  • 114
  • 121 (Type A2)
  • 123 (Type A2)
  • 150/RAC (Type BW, BX and BZ)
  • 151/RAC (Type CW, CX and CZ)
  • 153/RAC (Type E1W, E1X and E1Z)
  • 153/RAC/L (Type E2W, E2X and E2Z)
  • 153/Universal (Type E1W, E1X and E1Z)
  •  

     

    Increased Safety Cable Glands

    321

     

     

     

     

     

     

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke ICG653Universal/L Cable Gland

     

    안녕하세요 TIATIP입니다.

    오늘은 Hawke 호크케이블그랜드 가운데 Hazardous Area Cable Gland Type인  ICG653Universal/L 을 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    ICG 653/UNIVERSAL/L (for Lead Sheath Cables) Cable Gland

     

     

     

     

     

     

     

     

    ICG 653/UNIVERSAL/L (for Lead Sheath)

     

     

     

    Application

    • Outdoor or indoor use.
    • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.
    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

     

     

    Features

    • Provides a barrier seal between the individual insulated cores within the

       cable and prevents entry of the products of an explosion into the cable.
    • Assembly of the cable gland compresses and distributes the compound

       evenly to create a barrier seal at the point of entry into the enclosure.
    The compound chamber may be separated from the cured compound to

       ensure that the chamber has been effectively filled. If required, external voids

       can be repaired.
    Provides armour clamping, using one clamping arrangement for all

      armour/braid types.
    • Provides a seal and an electrical bond on the cables lead inner sheath.
    • Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    • Provides a cable retention and low smoke and fume, zero halogen seal onto

      the cables outer sheath.

     

     

     

    Materials & Finishes

    • The ICG 653/Universal/L cable gland is manufactured in Brass (standard),

       Nickel Plated Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

    • Exd IIC Gb, Exe II Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    IECEx Certificate No. IECEx BAS 06.0015X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 

      60529  and NEMA 4X.
    Deluge protection to DTS01.
    • Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

     

    보다 자세한 사양은 첨부의 세가지 파일을 참고하시기 바랍니다.

     

    Hawke 호크 ICG653 Universal L 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 ICG653 Universal L 조립도 01.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke SB474 Cable Gland  (0) 2012.12.18
    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501453Universal Cable Glands 제품사양

     

    안녕하세요?  TIATIP 입니다.

     

    오늘 이시간에는 Hawke 호크케이블그랜드 가운데 글로벌특허의 집합체이자 타사에서 모방할 수 없는 기술 집약의 명품그랜드를 소개합니다.

    세계적으로 선주들이 직접 사양을 지정할 만큼 조선업계에서는 꾸준히 사용되는 그랜드인데요 바로 501453Universal 입니다.

     

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe & Restricted
    Breathing ExnR Dual Certifi ed ATEX / IECEx

    Hawke 501453Universal Cable Gland

     

     

     

     

    501/453/Universal 시리즈는 Metric Thread와 NPT Thread에 따라 종류가 크게 나누어 지고, 해당 Thread상에서는 Cable의 Outer Sheath의 Min.~Max. 범위에 따라 Size 참조(OS,O,A, B,C, C2, D, E, F, G, H, J)가 각각 나누어 집니다. 하기의 품번은 모두 표준품이 Brass재질의 경우이며, 최근 많이 사용되고 있는 Nickel Plated Brass 재질은 품번 끝에 별도명시하면 됩니다. 간략히 N.P. 또는 N.P.B라고 명시되기도 합니다.

     

    501/453/Universal 시리즈

     

    501/453/Universal/Os/M20

    501/453/Universal/O/M20

    501/453/Universal/A/M20

    501/453/Universal/B/M25

    501/453/Universal/C/M32

    501/453/Universal/C2/M40

    501/453/Universal/D/M50

    501/453/Universal/E/M63

    501/453/Universal/F/M75

    501/453/Universal/G/M80

    501/453/Universal/H/M90

    501/453/Universal/J/M100

    501/453/Universal/Os/1/2"NPT

    501/453/Universal/O/1/2"NPT

    501/453/Universal/A/3/4"NPT

    501/453/Universal/A/1/2"NPT

    501/453/Universal/B/1"NPT

    501/453/Universal/B/1/2"NPT

    501/453/Universal/C/1-1/4"PT

    501/453/Universal/C/1'NPT

    501/453/Universal/C2/1-1/2"NPT

    501/453/Universal/C2/1-1/4"NPT

    501/453/Universal/D/2"NPT

    501/453/Universal/D/1-1/2"NPT

    501/453/Universal/E/2-1/2"NPT

    501/453/Universal/E/2"NPT

    501/453/Universal/F/3"NPT

    501/453/Universal/F/2-1/"NPT

    501/453/Universal/G/3-1/2"NPT

    501/453/Universal/H/3-1/2"NPT

    501/453/Universal/J/4"NPT

     

     

    Application

    • Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘ Z’

      elastomer and plastic insulated cables.
    For particular use with cables that exhibit ‘cold flow’ characteristics.

     

     

     

     

    Features

    Provides armour clamping using one clamping arrangement for all armour/braid

      types.
    Provides a diaphragm seal on the cables inner sheath which will not damage

      cable that has ‘cold flow’ characteristics.
    Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    Provides a cable retention and low smoke and fume, zero halogen seal onto the

      cables outer sheath.

     

     

     

     

    Materials & Finishes

     

    The 501/453/Universal cable gland is manufactured in Brass (standard), Nickel 

       Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

     

    Hawke Accessories for Cable Glands and Junction Boxes/Enclosures

     

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, ExnR IIC Gc, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0057X. For sizes Os - F.
    Baseefa Certificate No. Baseefa06ATEX0056X For sizes G - J.
    IECEx Certificate No. IECEx BAS 06.0014X. For sizes Os - F.
    IECEx Certificate No. IECEx BAS 06.0013X. For Sizes G - J.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

    60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529

      and NEMA 4X.
    Deluge Protection to DTS01.
    Operating Temperature Range: -60°C to +80°C.
    Alternative certification options available:

     

     

     

     

    추가 상세사양은 첨부 파일을 참고해 주시기 바랍니다.

     

    Hawke 호크 501453Universal 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501453Universal 조립도 01.pdf

    Hawke 호크 501453Universal 조립도 02.pdf

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Hawke 501453Universal Cable Glands 제품사양  (0) 2012.12.18
    Hawke 501453RAC/L Cable Gland  (0) 2012.12.18
    Hawke 501453RAC Cable Glands 제품사양  (0) 2012.12.18
    Hawke 501423 Cable Glands 제품사양  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    by TIATIP

    카테고리

    TI Story (949)
    TIA (92)
    TIP (194)
    TIEx (593)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)