Chalmit 샬밋 Sterling II Emergency Stainless Steel Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Sterling II Emergency Stainless Steel Luminaire  제품에 대해 살펴보도록 하겠습니다.   

 

 

 

Chalmit Lighting

Fluorescent

Sterling II Emergency Stainless Steel Luminaire  

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

 

 

The Sterling II stainless emergency is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage. The emergency version provides safety critical lighitng for three hours in the event of a mains power failure.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear.     

 

 

 

 

  

CAT REF.

SS2N/136/BI

SS2N/136/BI/EM

SS2N/158/BI

SS2N/158/BI/EM

SS2N/218/BI

SS2N/218/BI/EM

SS2N/236/BI

SS2N/236/BI/EM

SS2N/258/BI

SS2N/258/BI/EM

 

Technical Data(Datasheet)

Sterling IIE SS Emergency Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

  

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Sterling II Emergency Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Sterling II Emergency Luminaire  제품에 대해 살펴보도록 하겠습니다.

  

 

 

 

Chalmit Lighting

Fluorescent

Sterling II Emergency Luminaire  

Explosionproof

Zone2 Exn Fluorescent

ATEX CATEGORY 3

 

 

 

 

 

 

The sterling II emergency fluorecent luminaire designed for Zone 2 areas with a 3 hour emergency duration. The GRP body and polycarbonate diffuser are secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance.

The sterling II is designed as a single product for both Gas & Dust atmospheres. It is certified with Ex n protection under the ATEX 94-9-EC directive for Categories 3 G and 3 D and has IP65 sealing. The range is also IECEx compliant.

The Sterling suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.
 
   

 

 

 

 

CAT REF.

SS2N/136/BI

SS2N/136/BI/EM

SS2N/158/BI

SS2N/158/BI/EM

SS2N/218/BI

SS2N/218/BI/EM

SS2N/236/BI

SS2N/236/BI/EM

SS2N/258/BI

SS2N/258/BI/EM

NPRO04-0008

NPRO04-0012

NPRO04-0022

S3004-100001

S3004-100003

S3004-100004

SPOL4-10004

SPOL4-10005

SPOL4-10006

 

Technical Data(Datasheet)

Sterling IIE Emergency Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Lomond Emergency Luminaire  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Lomond Emergency Luminaire 제품에 대해 살펴보도록 하겠습니다.

 

 

Chalmit Lighting

Fluorescent

Lomond Emergency Luminaire

Explosionproof

Zone1 Exd Fluorescent

ATEX CATEGORY 2

 

 

 

 

The Lomond Ex d fluorescent is a traditional flameproof luminaire for use with linear and compact fluorescent lamps. It is suitable for Zone 1 and Zone 21 hazardous areas.

The Lomond is designed for applications are where white instant light is needed. The aluminium and glass construction is suitable for aggressive chemical environments such as paint spraying, which could otherwise attack plastics.

 

 

An emergency version with the 8W lamp is particularly suitable for over door lighting. This is designed for maintained operation as standard, a non-maintained emergency option is also available.

The design features a single flameproof path giving easy access for wiring, lamp replacement and to the control gear. The cable entry is the simple direct type using flameproof Ex d cable glands.

 

 

ATEX Compliant

GOST Approved 

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

  

 

 

 

CAT REF.

LOMD/108/BI

LOMD/108/BI/EM

LOMD/136/BI

LOMD/158/BI

LOMD/208/BI

LOMD/218/BI

LOMD/218/BI/EM

LOMD/236/BI

LOMD/236/BI/EM

LOMD/258/BI

LOMD/258/BI/EM

SLOMD-000001

SLOMD-000003

SLOMD-000008

SLOMD-000009

SLOMD-000010

SLOMD-000019

SPATE-00005

SPATE-00006

SPATE-00007

SPATE-00008

SPATE-00009

SPATE-00012

SPOL4-100004

SPOL4-100005

SPOL4-100006

 

 

Technical Data(Datasheet)

Lomond.pdf

 

  

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Protecta III Stainless Steel Emergency  기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Protecta III Stainless Steel Emergency 제품에 대해 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

Fluorescent

Protecta III Stainless Steel Emergency

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

 

 

 

 

 

 

The hazardous area Ex e Protecta III fluorescent is also available in a stainless steel body version. This product shares the technical features of the GRP bodied range but provides increased mechanical protection for the toughest of environmental conditions.

The durability of the stainless steel Protecta is ensured due to its construction from high grade stainless steel and a polycarbonate diffuser. The product is intended for applications where a risk of mechanical damage or exposure to chemical agents exist.

The enclosure also affords the high degree of ingress protection (IP66) required for use in Zone 1 and Zone 21 hazardous areas. The design  provides ease of access to lamps and control gear ensuring that installation and maintenance will be completed quickly and efficiently.

 

GOST R, CSA Approved 

IECEx Compliant

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

 

 

 

 

 

CAT REF.

PRSE/218/BI

PRSE/218/BI/EM

PRSE/236/BI

PRSE/236/BI/EM

PRSE/218/MO

PRSE/218/MO/EM

PRSE/236/MO

PRSE/236/MO/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO4-0005

SPRO4-0021

SPRO4-0033

 

 

Technical Data(Datasheet)

Protecta_III_SS.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Protecta III Emergency Luminaire 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 샬밋 Fluoresent 방폭조명가운데 Chalmit Protecta III Emergency Luminaire 제품에 대해 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

Fluorescent

Protecta III Emergency Luminaire

Explosionproof

Zone1 Exe Fluorescent

ATEX CATEGORY 2

  

 

 

 

The Protecta III Ex e emergency luminaire is a technologically advanced and high quality fluorescent suitable for use in Zone 1 and Zone 21 hazardous areas. The luminaire incorporates comprehensive self testing features to ensure lamp, battery and supply integrity. The Protecta construction has a glass reinforced polyester (GRP) body and polycarbonate diffuser, this makes it highly resistant to saline and corrosive environments, ideal for use on an Offshore Platform or FPSO.

 

 

The Protecta fluorescent is available as both maintained and non-maintained versions. During emergency operation light output can be up to 50% of one lamp with 90 minute duration as standard.

 

 

 

 


Other key features of the luminaire include extreme durabilty due to the rugged enclosure design and toughened mounting points together combined with very high ingress protection. The Protecta's simple construction ensures ease of access to lamps and control gear making installation and maintenance both quick and efficient.  

GOST, GB(China), CSA & CEPEL Approved

IECEX Compliant

End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality. 

 

 

 

 

 

CAT REF.

PRGE/218/BI

PRGE/218/BI/EM

PRGE/218/MO/EM

PRGE/218/MO

PRGE/236/BI

PRGE/236/BI/EM

PRGE/236/MO/EM

PRGE/236/MO
NPRO4-0007

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

SPROT-0033

 

 

Technical Data(Datasheet)

ProtectaIIIEm.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

카테고리

TI Story (959)
TIA (92)
TIP (194)
TIEx (603)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)