'explosion-proof'에 해당되는 글 29건

  1. 2014.07.05 Hawke ATEX INLINE Connector, ControlEx Termination Hook up Procedure 자료
  2. 2014.04.28 Hawke Additional NEC Approvals and CSA Approvals 사양소개
  3. 2014.04.28 Killark Harsh & Hazardous Receptacle Solutions 미니카탈로그
  4. 2014.04.14 호크 Hawke InstrumEx Connector 기술사양
  5. 2014.04.14 호크 Hawke ControlEx Connector 기술사양
  6. 2014.04.14 호크 Hawke PowerEx Connector 기술사양
  7. 2014.04.11 킬락 Killark EXB Series Enclosures, Junction Boxes 기술사양
  8. 2014.04.09 호크 Hawke Exe Enclosure Range 라인업 소개
  9. 2014.04.09 호크 Hawke SK-Series Stainless Steel Enclosure with K-Mass Fire Protection 기술사양
  10. 2014.04.09 호크 Hawke S-Series Enclosure Range 라인업 소개
  11. 2014.04.09 호크 Hawke S-Series Enclosure Size 9 기술사양
  12. 2014.04.09 호크 Hawke S-Series Enclosure Size 7 기술사양
  13. 2014.04.09 호크 Hawke S-Series Enclosure Size 6 기술사양
  14. 2014.04.09 호크 Hawke S-Series Enclosure Size 4 기술사양
  15. 2014.04.09 호크 Hawke S-Series Enclosure Size 3 기술사양
  16. 2014.04.09 호크 Hawke S-Series Enclosure Size 2L 기술사양
  17. 2014.04.09 호크 Hawke S-Series Enclosure Size 2 기술사양
  18. 2014.04.09 호크 Hawke S-Series Enclosure Size 1 기술사양
  19. 2014.04.07 호크 Hawke EJB Series Enclosure Range 라인업 소개
  20. 2014.04.07 호크 Hawke Enclosure PL Range 라인업 소개
  21. 2014.02.04 KILLARK, 킬락 조명부문 2014 미니카탈로그 소개자료(신제품출시)
  22. 2014.01.05 Hawke 호크 EZE Series Enclosure Stainless Steel (SUS), EZE62 Type Junction Box
  23. 2014.01.05 Hawke EZE Series Enclosure Stainless Steel (SUS), EZE42 Type Junction Box
  24. 2014.01.05 Hawke EZE Series Enclosure Stainless Steel (SUS), EZE22 Type Junction Box
  25. 2014.01.05 Hawke EJB Enclosure Stainless Steel (SUS), EJB2 Type Junction Box
  26. 2013.11.01 Killark, 킬락, KFL Series, SBKFL, LED FLOODLIGHT
  27. 2013.07.14 Killark, Switchrack Assemblies, Distribution Equipment, DE26
  28. 2013.07.14 Killark, GFCS시리즈, Distribution Equipment, Ground Fault Control Station, Factory Sealed, DE25
  29. 2013.05.23 Killark Catalog 링크 - Lighting (L)

Hawke ATEX INLINE Connector, ControlEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke ATEX INLINE Connector, ControlEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다. 

 

 

 

HAWKE

ControlEx Termination Procedure

 

IMPORTANT NOTE


1. Hawke International does not recommend the use of their ControlEx Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable / semi-portable applications.


2. Barrier type glands must be fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components. Where connectors are terminated to topside umbilical cables, or portable connectors, a barrier type cable gland should always be used.


3. Hawke Ex Connector products are designed to be used in multi-voltage applications in circuits up to 660V AC/DC. It is
possible that on certain installations, there may be a mix of applications utilising different voltages on the Connector
products. In these instances, the installer / circuit designer must ensure that the plugs and sockets, or their associated
cabling, is clearly marked with the correct circuit voltage and current rating to ensure that the equipment being supplied is
matched correctly with the supply voltage. The variable insert positions which are a feature of the Connectors may also be
used to provide additional means of safety in these applications.

 

ControlEx Hook Up Procedure

 

1. Remove the CP/CR connector assembly, electrical insert and cable gland
(sold separately) from their packaging.


2. Terminate the cable into the cable gland in accordance with the manufacturer’s Instructions. Ensure a minimum tail length of 130mm.

 


 

3. Unscrew the rear engaging nut from the connector shell, removing the rear shell and keyway tube.

 

  

4. Slide the rear engaging nut over the rear shell as shown and screw the rear shell onto the entry thread of the cable gland ensuring there is a sealing washer between the gland and rear shell. A small amount of Loctite 638
or equivalent can be added to the cable gland thread at this stage to further help prevent loosening of the cable gland in portable applications.

 


Where a thread adaptor is being used, ensure a suitable IP seal is fitted between the cable gland and thread adaptor, and thread adaptor & running coupler. If the thread adaptor has an integral O-Ring, please ensure this makes full contact with the cable gland and running coupler to maintain the IP
protection. Check to ensure the captive O-Ring seal on the rear shell is in place and is undamaged

 

If the tab washer is being used, ensure this is fitted in the orientation shown. Use the flats on the rear shell to further tighten.

 

 

 

 

5. Cut the conductors to the length shown in the table below.

 

 

Note: Maximum tolerance is to allow for twisted cables and placement of cores within connector shell. If core spacing relative to insert numbering does not require excess core, use minimum cut lengths.

 

6. Strip back the insulation from the conductor’s as shown

 

 

 

 

7. Proceed to step 8 if internal earthing is not required.

 


NOTE: If internal earthing is not being used, the internal earth crimp must not be fitted and the grub screw in the rear shell must be removed

 


If earthing is required slide the internal crimp (supplied with CP/CR inserts) over the earth conductor and crimp using suitable tool. The stud can then be fitted into the rear shell and fastened using the grub screw shown. The stud on the earth crimp should not protrude from the outer diameter of the rear shell. Adjust if necessary.

 

 

8. a) Solder inserts – black (1.5 – 35mm²). Tin the conductors and fill the solder cups on the back of the inserts with solder as required Solder conductors in place and remove any solder spikes/excess from the solder cup. It is advised that heat shrink should be fitted over the connection at this point

b) Solder inserts – white (1.5 – 4mm2). As above, however, inserts should be soldered outside of the insert body and not fully assembled. If the contacts are to be solder terminated to the conductors, this must be done prior to insertion
through the rear contact retainer. It is advised that heat shrink should be fitted over the connection at this point Then follow (c ii & iii).


c) Crimp Inserts (1.5 – 4mm²) – white.

 

i) Crimp the conductors into the contacts using Weidmuller CTX CM 1.6/2.5 crimp tool HCT1, or Astro Crimp Tool HCT2. For 0.75 to 1.5mm² conductors use the 1.5 die. For 1.6 to 4mm² use the 2.5 die. It is advised that heat shrink should be fitted over the connection at this point


ii) Feed the contacts through the required numbered hole on the rear contact retainer and slide the insertion tool over the contacts up to the groove (one end for pin and one for socket). Clip the groove on the contact into position in the rear contact retainer with the tool.

 

 

 

iii) Align the main pip on the rear contact retainer with the key on the front contact retainer and slide over the contacts into position. Ensure the 2 smaller pips are also in line

 

 

d) Crimp Inserts (6 – 35mm²) – black. Undo the grub screws on the crimp barrels and slide them off the back of the contacts. Slide the conductors into the back of the barrel. Orientate the barrel so that the grub screws are pointing
outwards and crimp with a suitable crimp tool.


Push the barrels back onto the rear of the contacts and tighten grub screw into the groove on the contact. Back off grub screw half a turn on crimp barrels of 10mm² or larger to allow them to slide up and down the contact slightly

 

 

 

 

 

9. Clip spacer tube over conductors. Bend conductors slightly so that there is no or minimal gap between the insert/spacer tube and rear shell. On crimp insert of 10mm² or larger, slide the crimp barrels up and down the contacts to achieve this and then lock them in place by tightening the grub screw’s on the crimp barrels.

The insert has 3 pips, shown below, which should be located as shown. The main centre keyway should align with the centre of the spacer tube

 

 

 


NOTE: If being used on offshore topside applications where extreme temperature fluctuations or extreme levels of humidity may be present, it is advisable to use Dow Corning 4 Electrical Insulating Compound within the spacer tube to help prevent any possible humidity build-up. See point 15 below

 

 

10. Looking from the front of the connector shell, align the key on the insert to the required key inside the connector and slide the whole assembly into the shell. The EX16 connector has 3 keyways, and all other connectors have 5 possible keyways

 

 

 

 

11. Fully screw the rear engaging nut onto the thread on the connector shell, do not rotate the connector shell during this process. Tighten grub screw in rear engaging nut. There should be a gap visible of no more than 1mm between running coupler and shell

 

 

 

 

12. If the tab washer is being used, fix the tab using the button head screw to the rear engaging nut. Bend the tabs over the
flats of the cable gland.


13. If being used, terminate the external earth to the ring terminal crimp provided with the insert. Remove the button head
screw and spring washer from the rear engaging nut. Attach the crimp to the rear engaging nut as shown above


14. The connector is now ready for use. Please refer to the ‘Hook Up’ procedure.

15. If additional protection is required due to extreme atmospheric conditions, before inserting the assembled connector insert and spacer tube into the connector shell (step 10 above) Dow Corning 4 Electrical Insulating Compound can be used to fill the spacer tube. It is recommended that the running coupler be filled, along with the inner face of the insert to ensure no humidity can affect the contacts

 

 

ControlEx MK IV Connector Hook Up Procedure

 

Before commencing hook up, a visual inspection should be carried out on the cable / gland / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly components have loosened during transportation / cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the cable gland / connector assembly.

 

Areas to be checked:

 

 

 

 

NB: These areas should also be checked as part of a routine maintenance programme.

 

1) Turn off the power to the connectors.
2) Ensure the connectors are both set to the same keying position number and are of the same insert type.

 

 

 

 

3) Engage the CP connector with the BR / CR connector and align the key on the CP connector to the keyway on the BR / CR connector.

 

 

engaging nut clockwise onto the BR/CR shell. If the engaging nut will not screw on more than half a
turn, then the connectors are set to different keying positions.

 

 

5) Tighten the grub screw on the engaging nut.

 

6) If the optional locking pin is being used, this should be fitted at this stage, once the connectors are fully mated.

 

 

7) To disconnect, turn off the power, slacken the tightened grub screw, turn the engaging nut anticlockwise and remove the connector. If power is to be put through the connectors whilst de-mated, then a flameproof cap (available separately) must be fitted.

 

 

 

 

Technical Data

ControlEx MKIV Spec.pdf

ControlEx Spec.pdf

ControlEx MKIV Hookup Procedure 20131105.pdf

ControlEx MKIV Hookup Procedure 20131218.pdf

ControlEx Hook up procedure 20091202.pdf

ControlEx Inline connector termination 20091202.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Additional NEC Approvals and CSA Approvals 사양소개

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke International News, 케이블글랜드/케이블그랜드 제품군의 새로운 승인자료 업데이트분을 소개합니다.

 

 

 

501/421

501/414

501/423

501/453/RAC

501/453/Universal

ICG 623

ICG 653/Universal

CSB 656N

 

Additional NEC / CSA
Approvals for Cable Glands

Hawke International is pleased to announce an important addition to their comprehensive portfolio of international hazardous location approvals.

 

 

 

Canadian Standards Association, cCSAus approvals for both Canada
and America, including Classes and Zones and Classes and Divisions
now cover the following cable gland ranges for use with Marine
Shipboard Cables, Unarmoured and Conduits:-

501/421
501/421R
501/414
501/423
501/453 RAC
501/453
Universal
ICG623
ICG653
Universal
CSB656
CSB656N

 

Additional NEC / CSA Approvals

 

We are pleased to announce an important addition to our comprehensive portfolio of international hazardous location approvals. Canadian Standards Association, cCSAus approvals for both Canada and America, including Classes and Zones and Classes and Divisions now cover the following cable gland ranges for use with Marine Shipboard Cables and Conduits:-

 

These cable gland ranges will be marked with ATEX, IECEX, GOST-R, CEPEL- INMETRO and with cCSAus Class and Zones and Class and Division marking.

 

The additional marking includes:- the CSA Certification number, Class 1 Zone1, AExeII, AExdIIC, AExtD Zone 21, Class I Div 2 ABCD, Class II EFG, and Class III and covers gases, vapours and dusts.

 

These NEC/CSA cable gland ranges compliment the well established UL listed Hawke 7 Series cable glands.

 

This additional approval will provide an improved global certification approach to satisfy our customer’s requirements for a comprehensive range of safe and reliable, globally certified cable gland connection solutions.

 

 

 

 

 

 

NEC CSA Approvals Glands.pdf

1.Cable Glands-Group ll.pdf

1.Cable Glannds-Industrial.pdf

1.Cable Glands-Group I Mining.pdf

1.Cable Glands-American Series NEC,IEC.pdf

1.Cable Glannds-Selection chart.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark Harsh & Hazardous Receptacle Solutions 미니카탈로그

 

안녕하세요 TIATIP 입니다.

 

최근 현장에서 많이 찾고 계시는 Plug, Receptacle 그리고 Connector와 관련하여, 새로운 기술로 선보이는 제품이 출시되고 있습니다. 종합카탈로그에 반영되기에 앞서 신제품 소식을 우선 첨부의 Receptacles Mini-Catalog 로 전해드립니다. 

 

 

Killark Harsh and Hazardous Receptacle Solutions

Expanding Reange of Harsh & Hazardous Receptacle Devices

Killark Receptacle Mini-Catalog

 

Ranging from 20A blade style to 200AMP pin & sleeve devices, Killark provides
numerous and field proven solutions for safely supplying power to fixed and
portable equipment in hostile environments.


Interchangeability with other manufacturers configurations provides user flexibility for real world applications. The range also has exclusive convenience features like breech-lock caps with "3rd Hand" notch.


Devices include plugs, receptacles, panel receptacles, and connectors to extend the reach of portable equipment. For personnel safety, ground fault protected receptacles, both portable and fixed, are available.

 

 

VersaMATE

 30A Selection Information

 60A Selection Information

100A Selection Information

150A Selection Information

200A Selection Information

 

VSQ Switched Receptacles

VSQ-FS Factory Sealed

VBQ Breaker Protected

UGR/UGP Bladed Receptacles

UGRC Selection Information

UGRC Connectors

UGRP Panel Receptacles

UGRS/UGRGF Receptacles

UGFI Ground Fault Protector

Installation Accessories

 

 

 

Killark, Exclusive Quick Wiring Plug(QW Option)

 

 

 

 

 

 

Killark Plug Receptacle PR.pdf

Killark Receptacle Mini CAT EN 20140428.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke InstrumEx Connector 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Exd Connector Series 가운데 InstrumEx 사양을 살펴보도록 하겠습니다.

 

Hawke

Hazardous Area Connector

InstrumEx

Tamb: -40°C to +60°C. II2 GD Exde IIC ExtD T85. IP66, 67

and DTS01 deluge protected.

 

 

 

 

 

Overview

 

This revolutionary design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. The InstrumEx connector is available with two insert options:

The 4-way option will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC & 2.5A (DC1) 60V DC.

The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC & 0.5A (DC1)60V DC. InstrumEx connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.

 

 

 

 

 

 

1. Pre-Terminated

All BR Connectors are supplied with pre-terminated and encapsulated tails to suit your requirements.

 

 

 

 

2. Electrical Insert With Key

Easy to assemble electrical insert allows crimped or soldered connections.

 

 

 

 

 

3. Integral Keying

Machined key and keyway ensures connector alignment. Unique 5 position insert keying system prevents cross-mating.

 

 

 

 

4. Quick Connect

Unique 4 start ACME thread offers a smooth and quick fully mating action in less than two turns. Earth continuity is achieved via a 360° contact clip.

 

 

 

 

5. Keyed Positions

Secondary keying on the actual insert bodies guarantees contact alignment, preventing pin damage.

 

 

 

 

6. Anti-rotation

Profiled Spigot and connector body prevent cable rotation, eliminating cable damage.

 

 

 

 

7. Reversible Armour Clamp

The InstrumEx incorporates our proven and patented armour termination method to accomodate different types of armour or braid.

 

 

 

 

8. Versatile LSFZH Rear Seal

Accommodates a wide range of cable sizes and provides highly effective cable grip and ingress protection.

 

 

 

 

 

HAWKE

Hazardous Area Connector

InstrumEx

Tamb: -40°C to +60°C. II2 GD Exde IIC ExtD T85. IP66, 67

and DTS01 deluge protected.

InstrumEx Connector Dimensions

 

 

 

 

 

How it works

The InstrumEx connectors are designed to provide ease of installation and speed of use, whilst providing a flexible safe and reliable method for mating and disconnection of circuits which are energised.

 

Stage 1.

 

 

The two mating halves are easily engaged and disengaged by two full turns of the ACME custom engaging thread, during which time the pins and socket are protected by the Exd flameproof protection concept. The outer shell of the connector combined with the integral Hawke cable gland seal ensure that the internal connections are protected to the Exe increased safety protection concept.

 

 

Stage 2.

 

 

During connector engagement and disengagement any sparking of the contacts is contained within an arc &lsqo quenching section’ which is housed within the Exd flamepath areas.

 

 

 

Stage 3. 

 

When the connector halves are disengaged, the socket section is protected to IP30 and must have the protective cap fitted immediately to restore the full Exe increased safety requirements and IP rating. The pins and socket inserts are interchangeable between all three connector components: i.e. Bulkhead Receptacle, In-Line Receptacle and Connector Plug. In all installations, the "live" side of the connector must always contain the socket insert.

 

 

 

 

 

Ex Connectors InstrumEx.pdf

Ex Connectors InstrumEx Bro.pdf

Ex Connectors InstrumEx Manual.pdf

Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

  

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke ControlEx Connector 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Exd Connector Series 가운데 ControlEx 사양을 살펴보도록 하겠습니다.

 

 

 

Hawke

Hazardous Area Connector

ControlEx

Tamb: -40°C to +60°C. II2 GD Exd IIC ExtD T95. Extb IIIC Db. IP66, 67

and DTS01 deluge protected.

 

 

 

 

Overview

 

The 3rd generation of ControlEx connectors include many features and refinements as a result of consumer feedback, which makes them particularly suitable for control and low/medium power applications.

The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 660V.

 

 

 

 

1. Threaded Bulkhead

The threaded bulkhead connector utilises industry standard threads and also incorporates an integral 'o' ring seal.

 

 

 

 

2. Fully Inspectable Flameproof Barrier

Provides direct inspection of the flameproof seal and offers users the peace of mind that the connector is safe for installation.

 

 

 

 

3. Keying Position

The unique visual 5 position insert keying system (3 on Ex16) along with the the integral machined keyways prevent contact damage and ensures safe use by eliminating the possibility of misconnection of adjacent circuits.

 

 

 

 

 

4. ACME Thread At Mating Interface

Unique ACME thread offers a smooth and quick fully mating action.

 

 

 

 

5. Easy Fieldwireable

Pin and socket inserts are numbered front and back to assist wiring and avoid termination errors. Crimp and solder inserts available.

 

 

 

 

 

 

6. Keyway Tube

Provides an extended installation keyway, which assists connector assembly by making pin/socket insertion quick and easy.

 

 

 

 

7. Spacer Tube

Improves accessibility for soldering/crimping conductors, as the spacer tube is retrofitted once electrical termination is complete.

 

 

 

 

8. Running Coupler

Allows the connector to be installed onto a pre-assembled cable gland. Connector is rear loading and includes locking engaging nut.

 


 

 

Hawke

Hazardous Area Connector

ControlEx

Tamb: -40°C to +60°C. II2 GD Exd IIC ExtD T95. Extb IIIC Db. IP66, 67

and DTS01 deluge protected.

ControlEx Connector Dimensions

 

 

 

 

 

For connector plugs and connector receptacles, cable glands are required to terminate incoming cables. These can be selected from the cable gland section of our website. These cable glands include but are not restricted to 501/453/Universal and the ICG 653/Universal. For portable applications we recommend the ICG 653/Universal cable gland.

 

 

Ordering Information

 

For ordering information and codes, please see order codes tab.

 

Order Codes

When ordering, select the relevant code from each block as shown in the example below:

ControlEx/Exd-32-S-CP-V-19 x 1.5-S-S-FLFPC-A

 

 

 

 

 

 

 

 

Ex Connectors ControlEx.pdf

Ex Connectors ControlEx Inline connector termination.pdf 

Ex Connectors ControlEx Hook up procedure.pdf

Ex Connectors ControlEx CP.pdf

Ex Connectors ControlEx Bulkhead receptacle termination procedur

Ex Connectors ControlEx BR.pdf

Ex Connectors Master Catalogue 20130819.pdf

Ex Connectors Controlex Config 20140531.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

  

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke PowerEx Connector 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Exd Connector Series 가운데 PowerEx 사양을 살펴보도록 하겠습니다.

 

 

 

Hawke

Hazardous Area Connector

PowerEx

Tamb: -40°C to +60°C. II2 GD Exd IIC ExtD T85. IP66, 67

and DTS01 deluge protected.

 

 

 

 

 

Overview

 

The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications.

Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request.

 

 

 

Hawke

PowerEx Features

 

 

 

 

 

1. Running Coupler

Allows the connector to be installed onto a pre-assembled cable gland.

 

 

 

2. Keying Position

The unique visual 5 position insert keying system along with the the integral machined keyway prevents contact damage and ensures safe use by eliminating the possibility of misconnection of adjacent circuits.

 

 

 

3. Internal Earth

Internal earth fitted as standard. Sized to suit cables earthing facility.

 

 

 

4. Easy Fieldwireable

Insert assembled outside connector shell to assist wiring and allow greater flexibility.

 

 

 

 

5. Multilam Technology

Tried and tested multiple high contact force, low resistance multilams used in all contacts.

 

 

 

 

6. Acme Thread At Mating Interface

Unique ACME thread offers a smooth and quick fully mating action.

 

 

 

Hawke

Hazardous Area Conn

PowerEx

Tamb: -40°C to +60°C. II2 GD Exd IIC ExtD T85. IP66, 67 and DTS01 deluge protected.

PowerEx Connector Dimensions

 

 

 

For connector plugs and connector receptacles, cable glands are required to terminate incoming cables. These can be selected from the cable gland section of our website. These cable glands include but are not restricted to 501/453/Universal and the ICG 653/Universal.

 

 

 

 

Ordering Information

 

For ordering information and codes, please see order codes tab.

 

When ordering, select the relevant code from each block as shown in the example below: PowerEx/Exd-50-S-CR-A-4-50-S-FLFRC-A

 

 

 

 

Ex Connectors-Power.pdf

Manual_PowerEx.pdf

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

  

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

킬락 Killark EXB Series Enclosures, Junction Boxes 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 킬락 Killark Enclosures의 대표적인 베스트셀러 EXB Series Enclosures, Junction Boxes에 대해 살펴봅니다.

            

 

Killark

EXB Series Enclosures

Junction Boxes

 

 

 

 

 

Application

 

- Locations made hazardous due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers and flyings, and areas which are subject to corrosion, weather and dampness.

 

 

 

- Petroeum Refineries, Chemical and Petrochemical plants with indoor and outdoor processes.

 

 

- Applications requiring junction, pull and/or splices boxes.

 

 

- Enclosure to house control stations, meters, relays, starters, circuit breakers, terminal blocks and other equipment or devices.

 

 

 

 

- Global applications (ATEX)

Enclosures are available for global applications with “CEN” suffix.

Assemblies that are modified to CENELEC/ATEX standards maintain their North
American certifications.

 

 

 

 

Explosion-proof Specification

 

Class I, Div. 1 & 2, Groups B①,C,D
Class I, Zones 1 & 2, Groups IIB+H2, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III, Div. 1 & 2
ENCL TYPE 3, 4, 4X②
NEMA 3, 4, 4X2, 7(B,C,D), 9(E,F,G)
CENELEC/ATEX/IEC Ex
Ex d IIB + H2 T5 or T6
Ex tD A21 IP66
Tamb < + 60°C

① Conduits must be sealed within 18” for Group B applications.
② NEMA 4X with optional SU-1 modification.

 

 

 

 

 

Features & Specifications

 

 

 

Features

• Copper-Free Cast Aluminum Construction. High strength, lighter in weight, corrosion resistant


• Fewer Cover Bolts. Computeraided design lessens the number of cover bolts by eliminating corner bolts. Reduces installation and maintenance time


• Gasketed Flange. Nitrile (BUNA-N) “O” ring gasket is located inside bolt circle to prevent water seeping into enclosure


• Ductile Mounting Lugs. Lugs are made of ductile aluminum alloy to adjust to irregular mounting surfaces without damaging enclosure.
Enclosure size 8x12x6 and larger furnished with bi-directional mounting lugs which may be positioned either vertically or horizontally to facilitate mounting


• Hinges. All enclosure sizes 8x12x6 and larger are supplied as standard with hinges mounted on the left side. Smaller enclosures are drilled for field installation of two Killark HINGE-9 assemblies or can be installed at factory by adding SU2 to catalog number. For hinges to be located in other positions, specify when ordering

 

• Recessed Flange Notches. Flanges are notched to allow for easier cover opening with prying instrument without flange damage


• Conduit Openings. Enclosures are cast with wall thickness suitable for drilling and tapping of conduit openings in all sides and back of boxes. Conduit size and location information is found on dimensional chart (see page E32). Conduits can be factory or field installed


• Mounting Pan Bosses. Mounting pan bosses are pre-drilled at factory for field mounting of optional mounting pan

 

 

 

 

 

 

 

 

 

 

 

 

Material/Finish

• Enclosure: Copper-free aluminum (less than 4/10 of 1%)
• Hinges: Aluminum with stainless steel hardware
• Steel Cover Bolts
• Optional Mounting Pans: Sheet aluminum
• Optional Windows: Tempered soda lime glass
• Aluminum

 

 

 

 

 

Killark Catalog Number / Order Number

 

EXB Enclosures, EXB Junction Boxes

EXB-664 N34, EXB-664 N34 MOD, EXB664 N34, EXB664 N34 MOD

EXB-684 N34, EXB-684 N34 MOD, EXB684 N34, EXB684 N34 MOD

EXB-6124 N34, EXB-6124 N34 MOD, EXB6124 N34, EXB6124 N34 MOD

EXB-886 N34, EXB-886 N34 MOD, EXB886 N34, EXB886 N34 MOD

EXB-8104 N34, EXB-8104 N34 MOD, EXB8104 N34, EXB8104 N34 MOD

EXB-8106 N34, EXB-8106 N34 MOD, EXB8106 N34, EXB8106 N34 MOD

EXB-8126 N34, EXB-8126 N34 MOD, EXB8126 N34, EXB8126 N34 MOD

EXB-8128 N34, EXB-8128 N34 MOD, EXB8128 N34, EXB8128 N34 MOD

EXB-10106 N34, EXB-10106 N34 MOD, EXB10106 N34, EXB10106 N34 MOD

EXB-10108 N34, EXB-10108 N34 MOD, EXB10108 N34, EXB10108 N34 MOD

EXB-10146 N34, EXB-10146 N34 MOD, EXB10146 N34, EXB10146 N34 MOD

EXB-10148 N34, EXB-10148 N34 MOD, EXB10148 N34, EXB10148 N34 MOD

EXB-12126 N34, EXB-12126 N34 MOD, EXB12126 N34, EXB12126 N34 MOD

EXB-12128 N34, EXB-12128 N34 MOD, EXB12128 N34, EXB12128 N34 MOD

EXB-12186 N34, EXB-12186 N34 MOD, EXB12186 N34, EXB12186 N34 MOD

EXB-12188 N34, EXB-12188 N34 MOD, EXB12188 N34, EXB12188 N34 MOD

EXB-12246 N34, EXB-12246 N34 MOD, EXB12246 N34, EXB12246 N34 MOD

EXB-12248 N34, EXB-12248 N34 MOD, EXB12248 N34, EXB12248 N34 MOD

EXB-122412 N34, EXB-122412 N34 MOD, EXB122412 N34, EXB122412 N34 MOD, EXB-12368 N34, EXB-12368 N34 MOD, EXB12368 N34, EXB12368 N34 MOD, EXB-123610 N34, EXB-123610 N34 MOD, EXB123610 N34, EXB123610 N34 MOD, EXB-14146 N34 ,EXB-14146 N34 MOD, EXB14146 N34 ,EXB14146 N34 MOD, EXB-14148 N34, EXB-14148 N34 MOD, EXB14148 N34, EXB14148 N34 MOD, EXB-16166 N34, EXB-16166 N34 MOD, EXB16166 N34, EXB16166 N34 MOD, EXB-16168 N34, EXB-16168 N34 MOD, EXB16168 N34, EXB16168 N34 MOD, EXB-16248 N34, EXB-16248 N34 MOD, EXB16248 N34, EXB16248 N34 MOD, EXB-162410 N34, EXB-162410 N34 MOD, EXB162410 N34, EXB162410 N34 MOD, EXB-18186 N34, EXB-18186 N34 MOD, EXB18186 N34, EXB18186 N34 MOD, EXB-18188 N34, EXB-18188 N34 MOD, EXB18188 N34, EXB18188 N34 MOD, EXB-18248 N34, EXB-18248 N34 MOD, EXB18248 N34, EXB18248 N34 MOD, EXB-182410 N34, EXB-182410 N34 MOD, EXB182410 N34, EXB182410 N34 MOD, EXB-18308 N34, EXB-18308 N34 MOD, EXB18308 N34, EXB18308 N34 MOD, EXB-18368 N34, EXB-18368 N34 MOD, EXB18368 N34, EXB18368 N34 MOD, EXB-183610 N34, EXB-183610 N34 MOD, EXB183610 N34, EXB183610 N34 MOD, EXB-203611 N34, EXB-203611 N34 MOD, EXB203611 N34, EXB203611 N34 MOD, EXB-24248 N34, EXB-24248 N34 MOD, EXB24248 N34, EXB24248 N34 MOD, EXB-242410 N34, EXB-242410 N34 MOD, EXB242410 N34, EXB242410 N34 MOD, EXB-24308 N34, EXB-24308 N34 MOD, EXB24308 N34, EXB24308 N34 MOD, EXB-24368 N34, EXB-24368 N34 MOD, EXB24368 N34, EXB24368 N34 MOD, EXB-243610 N34, EXB-243610 N34 MOD, EXB243610 N34, EXB243610 N34 MOD

 

 

 

 

 

 

Killark Enclosure EXB Series IDK.pdf

Killark Enclosures IDK.pdf

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke Exe Enclosure Range 라인업 소개

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 위험지역에 사용되는 호크 Hawke의 Ex'e' Enclosure Range 라인업에 대해 살펴보도록 하겠습니다.

 

 

 

 

Hawke

Exe Enclosure Range For Harsh and Hazardous Location

 

 

 

Hawke International have been producing Exe enclosures for over 30 years which are very highly regarded for their quality and exceptional strength - something extremely important in the demanding environments of the Oil and Gas, Petrochemical and Harsh and Hazardous industries.

 

 

 

 

 

1. PL Series

 

GRP Enclosures
Increased Safety Exe
IECEx / ATEX

 

 

 

2. S-Series

 

Stainless Steel Enclosures
Increased Safety Exe
IECEx / ATEX

 

 

 

3. EJB Series

 

Stainless Steel Enclosures
Increased Safety Exe
IECEx / ATEX

 

 

 

4. SK Series

 

With K-Mass® Fire Protection
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

 

 

Hawke

Exe Enclosure Range For Harsh and Hazardous Location

 

 

 

 

 

Hawke Full catalogues_20101103.zip

Hawke SK Enclosures_20130000.pdf

EJB Enclosure Hawke IDK.pdf

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

  

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke SK-Series Stainless Steel Enclosure with K-Mass Fire Protection 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 새롭게 소개되는 호크 Hawke 의 SK-Series 에 대해 살펴보도록 하겠습니다.

 

 

 

 

Hawke

SK-Series Stainless Steel Enclosure with K-Mass® Fire ProtectionSK-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

Features

 

Hawke SK Range of Stainless Enclosures come with K-Mass® fire protection as standard, designed for safety systems such as fire protection and critical control systems. K-Mass® is a passive fire protection solution which is moulded to the Hawke Enclosure protecting the terminals inside from the extreme temperatures of hydrocarbon based fires for up to 30 minutes. K-Mass® is fire tested to UL 1709 in a hydrocarbon fire for a minimum of 30 minutes at a temperature of 1093°C/2000°F. Hawke Enclosures and K-Mass® coatings have been supplied and specified by the worlds major petrochemical companies for safety related products for over 30 years.

 

 

 

 

 

 

Materials & Finishes

 

Robust 316 Stainless Steel construction with 3mm thick gland plates.

 

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Apparatus Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

04. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

05. Ingress Protection: IP66 to IEC/EN 60529.

06. Deluge Protection to: DTS01

07. Operating Temperature Range: -60°C to +80°C

08. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

09. 160mm, 210mm and 300mm deep options available.

10. Suitable for critical low current Control and Instrumentation applications.

 

 

Hawke

SK-Series Stainless Steel Enclosure with K-Mass® Fire Protection

SK-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

SK-Series Features

 

 

 

1. Rigid Slotted External Mounting Feet

Allows the enclosure to be mounted on most structures.

 

2. Internal/External Earth

 

3. Superior One Piece Silicone Sponge Gaskets

Providing IP66 and DTS01 protection.

 

4.  Single Gland Plate can be Specified on Face C

 

 

5. K-Mass® Fire Protection

Can be added to Hawke Enclosures with minimal increase to the overall footprint.

 

Adding K-Mass® to a Hawke Enclosure does not affect the certification, or the functionality of the enclosure. Not only is the enclosure protected, the cable glands are encased as well to ensure maximum protection and safety.

 

K-Mass® can be moulded to any of the Hawke Stainless Steel Enclosures without interferring with the easy access to terminals and cable glands for maintenance and/or inspection purposes.

 

Moulding K-Mass® to the Hawke Enclosure means that the fire protection can not be omitted.

 

K-Mass® protection does not insulate like other forms of fire protection and will only be activated during a fire.

 

 

 

 

 

 

Hawke SK Enclosures_20130000.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

  

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Range 라인업 소개

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 HAWKE Enclosure 가운데, Stainless Steel 재질의 S-Series의 라인업에 대해 살펴보겠습니다.

 

 

 

 

Hawke

S-Series Enclosure Range

 

 

01. Size 1

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

02. Size 2

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

03. Size 2L

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

04. Size 3

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

05. Size 4

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

06. Size 4L

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

07. Size 5

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

08. Size 6

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

09. Size 7

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

10. Size 8

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

11. Size 9

 

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 9 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 9 Enclosure 사양을 살펴보겠습니다.

  

 

 

 

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 9 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx  

 

 

  

Materials & Finishes

 

316 L Stainless Steel.

  

 

 

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 9 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 9 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

   

 

 

 

Hawke

S-Series Size 9 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

   

 

 

 

  

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

 

 

  

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 

 

 5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

 

 

 

 

 

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

 

 

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 7 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 7 Enclosure 사양을 살펴보겠습니다.

  

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 7 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx 

 

 

  

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 7 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 7 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

  

 

 

 

 

Hawke

S-Series Size 7 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

  

 

 

 

  

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

 

  

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 

 5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

  

 

 

 

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

 

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

  

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 6 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 6 Enclosure 사양을 살펴보겠습니다.

 

 

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 6 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

 

   

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 6 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 6 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

 

 

 

 

 

 

 

Hawke

S-Series Size 6 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

 

 

 

 

  

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

 

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

 

 

 

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 4 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 4 사양을 살펴보겠습니다.

 

 

 

 

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 4 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

  

 

 

 

 

  

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 4 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 4 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

10. 210mm deep option available.

 

 

 

 

 

 

 

Hawke

S-Series Size 4 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

 

 

 

 

 

 

  

 

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

 

 

 

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 

 

 

 5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

 

 

 

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

 

 

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 3 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 3 사양을 살펴보겠습니다.

 

 

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 3 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

  

 

 

  

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 3 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 3 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

10. 210mm deep option available.

 

 

 

 

 

 

Hawke

S-Series Size 3 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

 

 

 

 

  

 

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

 

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 

 5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

 

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 2L 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 2L 사양을 살펴보겠습니다.

 

 

 

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 2L Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

 

 

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 2L Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 2L Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

10. 210mm deep option available.

 

 

 

 

 

 

Hawke

S-Series Size 2L Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

 

 

 

  

 

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

 

 

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 2 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 2 사양을 살펴보겠습니다.

 

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 2 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 2 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 2 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

10. 210mm deep option available.

 

 

Hawke

S-Series Size 2 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

 

 

 

 

 

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

 

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 

5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke S-Series Enclosure Size 1 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘은 호크 Hawke의 Stainless Steel JB/Enclosure로 대표되는 S-Series가운데, Size 1 사양을 살펴보겠습니다.

 

 

Hawke

Junction Boxes/Enclosures

S-Series Size 1 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

 

 

 

 

Materials & Finishes

 

316 L Stainless Steel.

 

 

 

 

 

Technical Data

 

01. Increased Safety ex logo II 2 GD Exe II ExtD

02. Size 1 Certificate No's Baseefa08ATEX0208X and IECEx BAS 08.0065X.

03. Z Size 1 Certificate No's Baseefa08ATEX0207U and IECEx BAS 08.0064U.

04. Suitable for use in: Zone 1, Zone 2, Zone 21 and Zone 22.

05. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

     IEC/EN 61241-0 and IEC/EN 61241-1.

06. Ingress Protection: IP66 to IEC/EN 60529.

07. Deluge Protection to: DTS01

08. Operating Temperature Range: -60°C to +80°C

09. Temperature class & ambient: T6 40°C, optional T5 with ambients up to 65°C.

10. 210mm deep option available.

 

 

Hawke

S-Series Size 1 Enclosure

S-Series Stainless Steel

Increased Safety Exe / Dual Certified ATEX - IECEx

S-Series Features

 

 

 

 

 

1.Softer Finished Rounded Edges

Safer manual handling of enclosure and gland plates.

 

2. Electropolished Surface Finish

Provides high levels of corrosion resistance.

 

 

3.Robust Stainless Steel Construction

Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

4.Rigid Slotted External Mounting Feet

Allows enclosure to be hung onto the structure.

 

 

 

 

5. Extensive Range of Enclosure Sizes Available

Eleven standard enclosure sizes available. Sizes range from 153 x 233 x 130 to 740 x 1000 x 210. Gland plates offered on two sides (Faces B & D) and bottom (Face C) of each enclosure. Alternatively, boxes are available with gland plates on Face C only.

 

 

6. Superior One Piece Silicone Sponge Gaskets

DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance. – EMC mesh option.

 

7.Internal/External Earth Stud Fitted

 

8.Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

Prevents loss of screws during assembly and maintenance. 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke EJB Series Enclosure Range 라인업 소개

 

안녕하세요 TIATIP 입니다.

 

이번 시간에는 호크 Hawke Stainless Steel 박스가운데 EJB Series Enclosure Range에 대하여 살펴보겠습니다.

 

 

 

 

Hawke

Explosion-proof Enclosure

EJB Series Enclosure Range

Stainless Steel

 

 

 

1. EJB1

Hawke

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

2. EJB2

Hawke

Stainless Steel Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

호크 Hawke  Enclosure PL Range 라인업 소개

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 방폭외함/방폭박스 가운데 GRP(Glass Reinforced Polyester)로 대표되는 Hawke의 PL Enclosure Range 에 대하여 살펴보겠습니다.

 

 

  

 

1. PL612 Standard

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

2. PL612

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX 

 

 

 

3. PL615 Standard

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX 

 

 

4. PL615

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

5. PL620

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

6. PL626

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

7. PL630

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

8. PL712 Standard

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

9. PL712

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

 

10. PL722

Hawke GRP Enclosure
Increased Safety Exe
IECEx / ATEX

 

 

 

 

Hawke

GRP(Glass Reinforced Polyester) Enclosures

PL Range

 

 

 

 

 

Hawke

GRP(Glass Reinforced Polyester) Enclosures and SUS Enclosures

 

 

 

 

 

Hawke

GRP(Glass Reinforced Polyester) Enclosures and SUS Enclosures

 

 

 

 

 

 

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

KILLARK, 킬락 조명부문 2014 미니카탈로그 소개자료(신제품출시)

 

안녕하세요 TIATIP입니다.

 

오늘은 KILLARK(킬락)의 조명부문가운데 2014년 새롭게 론칭되는 LED타입의 조명자료로서 2014 미니카탈로그를 소개드립니다. 금년 기대되는 신제품의 출시가 이어질 것이 예고되고 있는 가운데, 종합카탈로그가 준비되는 시점에서 소식전하도록 하게겠습니다.

 

Expanding Range of Harsh & Hazardous LED Luminaires and Sytstems

KILLARK LED MINI CATALOG

 

 

From basic Utility Luminaires to complex Egress Lighting Systems, Killark is a major provider of LED labor and energy saving products for harsh and hazardous locations.


Market demand for this long life, clean white light is growing exponentially. Killark is there with a range of products for Class I, Div. 1 & 2, Zones 1 and 2, plus Class II applications.


Killark also satisfies the need for wet and corrosive environments with NEMA 4X ratings.

 

1. KILLARK LED VSL Series, "Utility Light"

 

 

Introduction

Killark ‘VSL’ Series LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4 areas where wind, water, snow or high ambients can be expected. VSL’s are sized to replace “Utility” type fixtures (incandescent or CFL’s) in hallways, closets, elevator pits, docks, stairwells, access tunnels, and mechanical rooms. These
fixtures can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and
dockside installations, and garage areas.

 

 

 

LED Luminaire Features and Standards
• Compact in Size with Traditional Industrial Appearance and Suitability
• Wide variety of optics including glass globes (clear and tempered, color) plus polycarbonate globes in clear and colors
• Optional Mounting arrangements including Pendant, Wall, Ceiling, Stanchion and Adapters
• Fixtures available unit packed, order option CP
• VSL LED Housings can be retrofitted to existing V Series splice boxes; upgrade from CFL or incandescent
• Energy Savings - less than 13 Watts of Power; less than 16 Watts for VSL1630. Replaces 75W or higher incandescent
• Long Life - 60,500+ maintenance-free hours to 70% initial lumens
• Crisp White Light for Excellent Color Rendering-Chromaticity 5000K (CCT); 70 CRI
• Integral driver - maintains fixture’s compact profile to fit in existing spaces
• Ambient suitability -40°C to 55°C

• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections – Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
• TM-21* method to project long term lumen maintenance
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens

 

Materials
• Body, splice box and guards are corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection
• Reflectors - Polypropylene for pendant or ceiling applications
• Heavy-duty silicone gasketing for NEMA 4 requirements 

 

 

2. KILLARK LED DVL Series, "Class II Utility Light"

 

 

 

Introduction

Killark ‘DVL’ Series LED fixtures are designed for hazardous locations where suspended metal, carbon (such as coal) and grain dusts create explosive or ignitable mixture with the air.

 

LED Luminaire Features and Standards
• Compact in Size with Traditional Industrial Appearance and Suitability
• DVL LED Housings can be retrofitted to existing DV Series splice boxes; upgrade from incandescent housing 100 Series components
• Long Life - 60,500+ maintenance-free hours to 70% initial lumens
• Crisp White Light for Excellent Color Rendering
- Chromaticity 5000K (CCT); 70 CRI
• Integral driver - maintains fixture’s compact profile to fit in existing spaces
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections – Vibration Resistant

 

Compliances
• UL-8750 for LED lighting
• UL 1598 standard for luminaires
• UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Division 2; Class III, Division 2
• CSA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations

 

Materials, Weights
• Body and splice box are corrosion resistant copper-free aluminum alloy. Steel guard.
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection
• Typical Weights (lbs.) with Standard Globe and Guard - DVL Series Pendant 7.7, Ceiling 7.7 and Wall 8.5

 

 

3. KILLARK LED MBL Series, "Compact Size"

 

 

 

Applications
CERTILITE ® MBL LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used
in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications can low ceiling areas in manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities.

 

Compliances
• UL-8750 for LED lighting; UL 1598A
• UL Marine type lighting fixtures
UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X

 

Materials
• Ballast tank, splice box and guards (MBAG, VMAG) corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection
• All external hardware - stainless steel
• Reflectors - Polyester reinforced fiberglass

 

LED Luminaire Features and Standards
• Compact in Size with Traditional Industrial Appearance and Suitability
• Wide variety of optics including globes, globes with reflectors, all-glass refractors, and spin-top refractors
• Optional Mounting arrangements including Pendant, Wall, Ceiling, and Stanchion
• MBL LED Housings can be retrofitted to existing MB splice boxes; upgrade from Fluorescent or HID
• Energy Savings - less than 50 Watts of Power; 25 Watts for MBL2230
• Long Life up to 100,000+ maintenance free hours to 70% initial lumens
• Crisp White Light for Excellent Color Rendering - Chromaticity 5000K (CCT); 70 CRI, TM-21
• Ambient suitability -40°C to 40°C (to 55°C for 14W to 22W)

• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections – Vibration Resistant
• Dual Drivers 40, 45, 50W - Redundant Systems (built-in backup), or for additional energy savings half of MBL luminaire can be turned off
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens (TM-21+ Cal.)

 

 

4. KILLARK LED VM1L Series, "Reduced Profile"

 

 

 

Applications
CERTILITE®V VM1L LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be
used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities.

Compliances
• UL-8750 for LED lighting
• UL Marine type lighting fixtures (HID models)
UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X

 

Materials
• Ballast tank, splice box and cast guards corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection
• All external hardware - stainless steel
• Reflectors - Polyester reinforced fiberglass

 

LED Luminaire Features and Standards
• Reduced profile with Traditional Industrial Appearance and Suitability
• Wide variety of optics including globes, globes with reflectors, all-glass refractors, and spin-top refractors

• Swing-Barrel Nut patented tank mounting system
• Optional Mounting arrangements including Pendant, Wall, Ceiling, Stanchion and others
• VM1L LED Housings can be retrofitted to existing VM splice boxes; upgrade from HID sources
• Energy Savings - less than 55 Watts of Power
• Long Life - 50,000 - 55,000 maintenance free hours to 70% initial lumens
• Crisp White Light for Excellent Color Rendering - Chromaticity 5000K (CCT); 70 CRI
• Ambient suitability -40°C to 55°C
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz

• Solder-LESS LED Board Connections – Vibration Resistant
• Dual Drivers - Redundant Systems (built-in backup), or for additional energy savings half of VM1L4530 can be turned off
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens

 

 

5. KILLARK LED VM2LB, VM2LC, VM4LB and VM4LC Series, "High Wattage"

 

 

 

Applications
CERTALITE® V VM4L LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC/CEC.
Typical applications include manufacturing plants, food processing, and certain
chemical and petrochemical processing facilities, sewage treatment plants,
off-shore and dockside installations, garages and storage facilities.

 

Compliances
• UL-8750 for LED lighting
• UL-844 Standard for lighting fixtures for hazardous locations, Class I,
Division 2; Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X
• IP66 & Marine

 

Materials
• Ballast tank, splice box and cast guards corrosion resistant copper-free
aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete,
uniform corrosion protection
• All external hardware - stainless steel
• Reflectors - Polyester reinforced fiber glass or aluminum

 

LED Luminaire Features and Standards
• Traditional Industrial Appearance, Suitability, and Photometric Performance

• Wide variety of optics including globes, globes with reflectors, all-glass refractors, spin-top refrac tors and flat lens
• Swing-Barrel Nut patented tank mounting system
• Optional Mounting arrangements including Pendant, Wall, Ceiling,
Stanchion and others
• VM4L LED Housings can be retrofitted to existing VM splice boxes;
upgrade from HID sources
• VM2Lx housing is 1.56” shallower for low ceilings to 65 Watt
• Crisp White Light for Excellent Color Rendering - Chromaticity
5000K (CTT range); approx. 70 CRI
• Energy Savings - less than 130 Watts of Power
• Long Life - 50,000 - 55,000 maintenance free hours to 70% initial lumens
• Ambient suitability -40°C to 55°C

• Instant On - Including after power interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections - Vibration Resistant
• Dual Drivers - Redundant Systems (built-in backup) for most models, or
for additional energy savings half of fixture can be turned off
• LM80-08* Measurement of lumen maintenance for LED light sources
(including TM-21)
• LM79-08* Certified “Absolute” Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens
• Two LED internal heat sink styles
- Bulb VM2LB/VM4LB
- Concave VM2LC/VM4LC

 

 

6. KILLARK LED EML Series, "Explosion-Proof"

 

 

Applications
HOSTILELITE® EML LED Series fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4x areas where wind, water, snow or high ambients can be expected. They
can be used in locations made hazardous due to the presence of flammable or explosive gases, vapors and combustible dusts as defined by the NEC.
Applications include classified areas such as paint manufacturing plants, ammunition facilities, oil and gas producing and refining plants,
off-shore and dockside installations, tank farms, pipeline pumping stations and marine loading and fuel transfer terminals.

 

Compliances
• UL-8750 for LED lighting
• UL-844 Electric Lighting Fixtures for use in Hazardous Locations
• UL Marine Type Electric Lighting Fixtures
• CSA C22.2 no. 137-M1981 Electric Luminaires for use in Hazardous Locations
• NEMA 3, 4, 4X, 7CD, 9EFG
 

Materials
• Ballast tank, splice box and guards corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electorstatically applied for complete, uniform corrosion protection
• All external hardware - Stainless Steel
• Reflectors are aluminum with white finish

 

LED Luminaire Features and Standards
• Compact Explosion-proof with Traditional Industrial Appearance and Suitability
• Fluted or Exclusive Clear Globe; Dome or Angle Reflectors

• Optional Mounting arrangements including Pendant, Wall, Ceiling, and Stanchion
• EML LED Housings can be retrofitted to existing EZ splice boxes; upgrade from Incandescent, Fluorescent or HID
• Energy Savings - less than 55 Watts of Power

• Long Life - 50,000 - 55,000 Maintenance Free Hours to 70% Initial Lumens
• Crisp White Light for Excellent Color Rendering - Chromaticity Avg. 4950K (CCT); 69 CRI
• Ambient suitability -40°C to 55°C
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections – Vibration Resistant
• Dual Drivers - Redundant Systems (built-in backup)

• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens
• Factory Sealed Construction - no external seal required, simply wire mouting cap and threadin fixture to install.

 

 

7. KILLARK LED KFLC Series, "Compact Flood"

 

 

Applications
LED Compact Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications include spot lighting or walkways in manufacturing plants,
and certain chemical and petrochemical processing facilities, sewage treatment
plants, off-shore and dockside installations, garages and storage facilities

Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598 (A)
• UL-844 Standard for lighting fixtures for hazardous locations, Class I,
Division 1; Class II, Division 1; Class III
• CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous
locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66

 

Materials
• Body and lens frame corrosion resistant copper-free aluminum alloy with
baked powder epoxy/polyester finish, electrostatically applied for complete,
uniform corrosion protection
• All external hardware - stainless steel
• Thermal shock and impact resistant extra heavy-duty glass lens
• High temperature silicone gasketing
• Trunnion heavy gauge galvanized steel with painted finish

 

LED Flood Features and Standards
• One 3/4” NPT hub & R-21 3/4” x 1/2” reducer is standard
• Crisp White Light for Excellent Color Rendering - Chromaticity 5000K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - 80,000 maintenance free hours to 70% initial lumens
• Ambient suitability -40˚C to 55˚C
• Instant On - Including after power interruption
• Solder-LESS LED Board Connections - Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of initial
Lumens - TM-21* & calculated

 

 

8. KILLARK LED KFL Series, "CID2 Flood"

 

Applications
LED Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities

 

Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598(A)
• UL-844 Standard for lighting fixtures for hazardous locations, Class I,
Division 2; Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous
locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66
• IEX suffix Zone 2 to EN Standards

 

Materials
• Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for
complete, uniform corrosion protection
• All external hardware - stainless steel
• Thermal shock and impact resistant glass lens
• High temperature silicone gasketing
• Trunnion heavy gauge galvanized steel with painted finish

 

LED Flood Features and Standards
• Crisp White Light for Excellent Color Rendering - Chromaticity
5000K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - to 150,000 maintenance free hours to 70% initial lumens
• Ambient suitability -50°C to 55°C
• Instant On - Including after power interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections - Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of initial Lumens - TM-21* & Calculated

 

 

9. KILLARK LED KF1L Series, "CID1 Flood"

 

Applications
LED KF1L Series Explosion-proof Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities

 

Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598A
• UL-844 Standard for lighting fixtures for hazardous locations, Class I,
Division 1; Class II, Division 1; Class III
• CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous
locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66

 

Materials
• Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for
complete, uniform corrosion protection
• All external hardware - stainless steel
• Thermal shock and impact resistant extra heavy-duty glass lens
• High temperature silicone gasketing
• Trunnion heavy gauge 316 SS

 

LED Flood Features and Standards
• Factory Sealed Construction
• Two 3/4 NPT entries (see logic for other choices)
• Supplemental surge protection (AC models) and looping terminals
are standard
• Crisp White Light for Excellent Color Rendering - Chromaticity
5000K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - 80,000 maintenance free hours to 70% initial lumens
• Instant On - Including after power interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections - Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature for Hours of use to 70% of initial
Lumens - TM-21* & calculated

 

 

10. KILLARK LED EBS Series, "Emergency Battery System" 

Applications
Where required by the NEC (or local “Life Safety” code) for safe egress (over
doors, aisleways, stairs, walkways, exit paths, and outer perimeter walls) to
provide illumination during interruption of normal power to area lighting.
In indoor or outdoor locations made hazardous by the presence of flammable
gas, vapors, or dusts. Includes refinery/chemical production and storage, grain processing, waste water treatment facilities and any area requiring heavy-duty dependable emergency lighting.

 

Exclusive Features
• LED Heads provide clear crisp illumination at 5000Kk
• LED Head L70 value 100,000 hours for minimal maintenance
• Up to 500% brighter than competitive conventional unitsl
• Enclosure Type 4 (NEMA 4) for wet and harsh locations
• Group B is standard when using EBSHK type heads
• Automatic Safety Disconnect - Removing main cover disconnects
battery power
• Ambient Suitability 0°C to 45°C Battery Unit; Heads to 55°
• Compact unit requires only two mounting points
• World Voltage 120-277 VAC 50/60Hz input

 

Other Features
• High % of lumens maintained during 90 minute egress cycle
• EBSHK type heads are fully adjustable on unit or remote when ordered with
RFSL Factory Sealed mounting kits

• EBSEL type heads are factory sealed on their EZ type mounting boxes
• Heads can be remote mounted over 300’ from battery unit
• Ni-Cad sealed batteries provide 90 minutes of illumination
• Integral base unit LED pilot light indicates AC power is present
• Choice of Integral or Remote Push-To-Test station to verify
system operation
• Vapor Capsule to inhibit corrosion is standard with main enclsure unit
• Terminal Blocks identified for incoming and outgoing connections

 

Compliances
• UL 1598 Standard for Luminaires
• UL 8750 for LED Lighting
• UL 844 Luminaires for Hazardous Locations
• UL 1203 Explosion-Proof/Dust-Ignition-Proof Electrical Enclosures
• UL 924 Emergency Lighting
• CSA C22.2 no. 137-M1981 Luminaires for Hazardous Locations
• CSA C22.2 no. 30-M1986 C1D1 Enclosures
• CSA 22.2 no. 25-1066 C2D1 EFG Enclosures
• Enclosure Type 4
• NEMA 4, 7BjCD, 9EFG

 

Materials
• Main Enclosure and Heads Copper Free Aluminum alloy with Baked
Powder epoxy/polyester finish, electro statically applied for complete,
uniform corrosion protection
• Attachment fittings copper-free aluminum
• External hardware 316 Stainless Steel
• EBSEL reflectors EXIT accessory aluminum with white paint


 

 

What makes Killark LED products GREEN?

 

Hubbell is committed to be a recognized leader

in conserving natural resources to sustaion our environment.

 

 

 

 

 

Original_V3_2014_LED_Mini_CAT_WEB.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 호크 EZE Series Enclosure Stainless Steel (SUS), EZE62 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke 호크 Stainless Steel(SUS) 박스로 대표되는 EZE Series 가운데 EZE62 타입에 대해 살펴보겠습니다.

 

 

 

Hawke 호크 EZE Series Enclosure SUS EZE62 Juction Box

 

 

Hawke International

Enclosure Type : EZE62

Stainless Steel

Ex'e' Enclosures for Harsh and Hazardous Locations

Increased Safety Exe Dual Certified ATEX/IECEx

HAWKE International

호크

 

 

 

호크 HAWKE Junction Box EZE Series

 

 

Hawke Technical Data

- Increased Safety II 2 GD Exe II, ExtD
- Eze 62 Certificate No’s: Baseefa08ATEX0364X and IECEx BAS 08.0125X.
- ZEze 62 Certificate No’s: Baseefa08ATEX0363U and IECEx BAS 08.0124U.
- Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
- Construction and Test Standards:

   IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
- Ingress Protection: IP66 to IEC/EN 60529.
- Deluge Protection to DTS01.
- Operating Temperature Range: -40°C to +80°C.
- Temperature Class and Ambient: T6 40°C,

   optional T5 with ambients up to 65°C.
- Assembly Instruction Sheet: AI 280.
- Alternative certification options available:

 

 

 

 

 

   

  

General Information

 

 

 

 

호크 Hawke Junction Box

 

 

1. Robust Stainless Steel Construction
Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

2. Electropolished Surface Finish
Provides high levels of corrosion resistance.

 

3. Softer Finished Rounded Edges
Safer manual handling of enclosure and gland plates.

 

4. Rigid Slotted External Mounting Feet
Allows enclosure to be hung onto the structure.

 

5. Stainless Steel Lid Fixing Screws with Nylon Retaining Washers
Prevents loss of screws during assembly and maintenance.

 

6. Superior One Piece Silicone Sponge Gaskets
DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance.

Good chemical resistance – EMC mesh option.

 

7. Extensive Range of Enclosure Sizes Available
Three standard enclosure sizes available,

Sizes range from 224 x 310 x 183 to 624 x 310 x 183.
Gland plate on face C only.


8. Internal/External Earth Stud

 

 

 

 

 

 

Hawke 호크 케이블글랜드(Cable Gland) 및 정크션박스(Junction Box)상의 Cable Entry 설치이미지

 

 

 Hawke 호크 EZE Series SUS Juction Box, EZE Series

  

 

 

 

Hawke Enclosure Catalogue HWK05 March 02.zip

Hawke Full catalogues_20101103.zip

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke EZE Series Enclosure Stainless Steel (SUS), EZE42 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크 Stainless Steel(SUS) 박스로 대표되는 EZE Series 가운데 EZE42 타입에 대해 살펴보겠습니다.

 

 

 

Hawke 호크 EZE Series Enclosure SUS EZE42 Juction Box

 

 

Hawke International

Enclosure Type : EZE42

Stainless Steel

Exe Enclosures for Harsh and Hazardous Locations

Increased Safety Exe Dual Certified ATEX/IECEx

 

 

 

 

Technical Data

- Increased Safety II 2 GD Exe II, ExtD
- Eze 42 Certificate No’s: Baseefa08ATEX0364X and IECEx BAS 08.0125X.
- ZEze 42 Certificate No’s: Baseefa08ATEX0363U and IECEx BAS 08.0124U.
- Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
- Construction and Test Standards:

   IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
- Ingress Protection: IP66 to IEC/EN 60529.
- Deluge Protection to DTS01.
- Operating Temperature Range: -40°C to +80°C.
- Temperature Class and Ambient: T6 40°C,

   optional T5 with ambients up to 65°C.
- Assembly Instruction Sheet: AI 280.
- Alternative certification options available:

 

 

 

 

 

   

  

General Information

 

 

 

 

 

1. Robust Stainless Steel Construction
Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates. Durable stainless steel rating label.

 

2. Electropolished Surface Finish
Provides high levels of corrosion resistance.

 

3. Softer Finished Rounded Edges
Safer manual handling of enclosure and gland plates.

 

4. Rigid Slotted External Mounting Feet
Allows enclosure to be hung onto the structure.

 

5. Stainless Steel Lid Fixing Screws with Nylon Retaining Washers
Prevents loss of screws during assembly and maintenance.

 

6.Superior One Piece Silicone Sponge Gaskets
DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance.

Good chemical resistance – EMC mesh option.

 

7. Extensive Range of Enclosure Sizes Available
Three standard enclosure sizes available,

Sizes range from 224 x 310 x 183 to 624 x 310 x 183.
Gland plate on face C only.


8. Internal/External Earth Stud

 

 

 

Hawke Junction Box/Enclosure Stainless Steel, EZE Series

  

 

 

 

Hawke Enclosure Catalogue HWK05 March 02.zip

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke EZE Series Enclosure Stainless Steel (SUS), EZE22 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크 Stainless Steel(SUS) 박스로 대표되는 EZE Series 가운데 EZE22 타입에 대해 살펴보겠습니다.

 

 

Hawke 호크 EZE Series Enclosure SUS EZE22 Juction Box

 

 

Enclosure Type : EZE22

Stainless Steel

Exe Enclosures for Harsh and Hazardous Locations

Increased Safety Exe Dual Certified ATEX/IECEx

 

 

Hawke Junction Box/Enclosure Stainless Steel, EZE Series

 

Technical Data

- Increased Safety II 2 GD Exe II, ExtD
- Eze 22 Certificate No’s: Baseefa08ATEX0364X and IECEx BAS 08.0125X.
- ZEze 22 Certificate No’s: Baseefa08ATEX0363U and IECEx BAS 08.0124U.
- Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
- Construction and Test Standards:

   IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
- Ingress Protection: IP66 to IEC/EN 60529.
- Deluge Protection to DTS01.
- Operating Temperature Range: -40°C to +80°C.
- Temperature Class and Ambient: T6 40°C,

   optional T5 with ambients up to 65°C.
- Assembly Instruction Sheet: AI 280.
- Alternative certification options available:

 

   

 

 

 

   

  

General Information

 

 

 

1. Robust Stainless Steel Construction
Enclosure material thickness ranges between 1.2 – 2.0mm with 2 – 3mm thick gland plates.
Durable stainless steel rating label.

 

2. Electropolished Surface Finish
Provides high levels of corrosion resistance.

3. Softer Finished Rounded Edges
Safer manual handling of enclosure and gland plates.

 

4. Rigid Slotted External Mounting Feet
Allows enclosure to be hung onto the structure.

5. Stainless Steel Lid Fixing Screws with Nylon Retaining Washers
Prevents loss of screws during assembly and maintenance.

 

6. Superior One Piece Silicone Sponge Gaskets
DTS01 deluge protection.
Provides Ingress Protection to IP66.
Durable with excellent UV stability and chemical resistance.

Good chemical resistance – EMC mesh option.

 

7. Extensive Range of Enclosure Sizes Available
Three standard enclosure sizes available,

Sizes range from 224 x 310 x 183 to 624 x 310 x 183.
Gland plate on face C only.

 

8. Internal/External Earth Stud

 

 

 

Hawke Junction Box/Enclosure Stainless Steel, EZE Series

  

 

 

Hawke Enclosure Catalogue HWK05 March 02.zip

Hawke Full catalogues_20101103.zip

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke EJB Enclosure Stainless Steel (SUS), EJB2 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크 Stainless Steel(SUS) 박스로 대표되는 EJB Series 가운데 EJB2 타입에 대해 살펴보겠습니다.

 

 

 

Hawke 호크 EJB Enclosure SUS EJB2 Juction Box

 

 

Hawke International

Enclosure Type : EJB2

Stainless Steel

Exe Enclosures for Harsh and Hazardous Locations

 

 

 

 

Technical Data

316 L Stainless Steel.
Increased Safety ex logo II 2 GD Exe II C Gb Extb, III C Db.
EJB Certificates:
Baseefa Certificate No. Baseefa08ATEX0208X
IECEx Certificate No. IECEx BAS08.0065X
ZEJB Certificates:
Baseefa Certificate No. Baseefa08ATEX0207U
IECEx Certificate No. IECEx BAS08.0064U
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66 to IEC/EN 60529.
Deluge protection to DTS01.
Operating Temperature Range -40°C to +80°C.
Temperature Class and Ambient: T6 40°C,

optional T5 with ambients up to 65°C.

 

 

 

  

  • EJB Assembly Instructions adobe pdf logo
  • ZEJB Assembly Instructions adobe pdf logo
  • Enclosure Data Sheet adobe pdf logo
  • Enclosure full technical specification
  • Enclosure wattage factor
  • Enclosure combined terminal resistance
  • Maximum physical quantity of terminals
  •  

     

     

     

     

      

      

     

    Please Note :

    Hawke still offer enclosures to customer specifications available from our Box Modifiers.

    The enclosure is supplied with an integral internal/external earth stud assembly.
    The terminals listed are restricted to a minimum operating temperature of -50°C.

     

     

      

    General Information

    1.Robust Stainless Steel Construction

    2. Electropolished Surface Finish

    3. Softer Finished Rounded Edges

    4. Rigid Slotted External Mounting Feet

    5. Stainless Steel Lid Fixing Screws with Nylon Retaining Washers

    6. Superior One Piece Silicone Sponge Gaskets

    7. Extensive Range of Enclosure Sizes Available

    8. Internal/External Earth Stud

     

     

     

     

     

     Hawke 호크 EJB Series SUS Juction Box 

      

     

     

    Hawke Enclosure Catalogue HWK05 March 02.zip

    Hawke Full catalogues_20101103.zip

     

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Killark, 킬락, KFL Series, SBKFL, LED FLOODLIGHT

     

    안녕하세요 TIATIP 입니다.

     

    오늘은  PETRO BRIGHT, KFL시리즈 LED Floodlight 을 신규 브로슈어와 함께 간단히 소개드립니다.

     

     

     

     

     

    KILLARK

    LED Labor and Energy Saving Technology

    KFL Series, Lighting

    FLOODLIGHTS

    CLASS1, Division 2

    CLASS1, Zone 2

    •Up to 125 Lumens Per Watt
    •Harsh & Hazardous Duty
    •L70 Value 150,000+ Hours
    •Crisp White 5,000° Kelvin Light

     

     

     

     

     

    Applications
    LED Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
    Typical applications include manufacturing plants, and certain chemical and
    petrochemical processing facilities, sewage treatment plants, off-shore and
    dockside installations, garages and storage facilities

     

    Compliances
    • UL-8750 for LED lighting
    • ANSI/UL 1598(A)
    • UL-844 Standard for lighting fixtures for hazardous locations, Class I,
    Division 2; Class II, Divisions 1 and 2; Class III
    • CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous
    locations
    • Enclosed and gasketed
    • NEMA 3, 4X, IP66
    • IEX suffix Zone 2 to EN Standards

     

    Materials
    • Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for
    complete, uniform corrosion protection
    • All external hardware - stainless steel
    • Thermal shock and impact resistant glass lens
    • High temperature silicone gasketing
    • Trunnion heavy gauge galvanized steel with painted finish

     

    LED Flood Features and Standards
    • Crisp White Light for Excellent Color Rendering - Chromaticity
    5000° K (CCT); approx. 70 CRI
    • Energy Savings - High lumens per watt
    • Long Life - to 150,000 maintenance free hours to 70% initial lumens
    • Ambient suitability -50°C to 55°C
    • Instant On - Including after power interruption
    • World Voltage 120 - 277VAC 50/60Hz
    • Solder-LESS LED Board Connections -
    Vibration Resistant
    • LM80-08* Measurement of lumen maintenance for LED light sources
    • LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
    • L70 Values - Industry Nomenclature for Hours of use to 70% of initial Lumens - TM-21* & Calculated

    * LM-xx & TM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers.
    For more information go to www.ies.org

     

     

     

     

    Killark Catalog Number

    KFL06030, KFL07030, KFL07530, KFL08530, KFL09030, KFL10530, KFL11030, KFL12530, KFS-6, KFCB, KFWB, K4040, 4041, KFLG, VMSC10, KFL-DARK, KFL-DOOR

     

     

     

     

     

     

     

    Original_SBKFL.pdf

    Original_LED_Mini_CAT_Web.pdf

     

     

         

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Killark, Switchrack Assemblies, Distribution Equipment, DE26

     

    안녕하세요 TIATIP 입니다.

     

    오늘 이 시간에는 KILLARK 의 스위치랙, 분산보드 시스템관련 애플리케이션을 살펴보도록 하겠습니다.

     

     

     

     

    Applications
    • Totally wired motor control center
    • Hazardous locations due to the presence of flammable gases or vapors,
    combustible dust or easily ignitable fibers and flyings, and areas subject
    to corrosion, weather and dampness
    • Petroleum refineries, chemical and petrochemical plants with indoor and
    outdoor processes
    • Applications requiring overcurrent and short circuit protection of lighting,
    appliances, heating and motor circuits

     

     

    Features
    • NEMA 3, 4X (optional) rated for protection from hose directed water and
    corrosion
    • Completely assembled and wired for customer connections to load side of
    starters and breakers
    • Single sided or double sided assemblies per customer specification
    • Killark components supplied include series EXB, B7C, B70, D2L, B7L, GR,
    HKB, D2P, B7P, EZ, VM, EM, ENY, EYS and others

     

     

    Standard Materials
    • Enclosures: Copper-free aluminum (less than 4/10 of 1%)
    • Bus Enclosure (when supplied) is painted steel or stainless steel
    • Frame: Steel (Hot Dipped Galvinized) or Aluminum. All welded construction
    • Bus Bars: Copper, bare or insulated

     

     

    Ordering Information
    • Supply one line diagram or bill of material and Killark will do the rest.
    Assembly drawing and wiring diagram will be supplied for customer approval.

     

     

    Self Sufficient Power Supply
    Provides a mix of 120/240V and 480VAC receptacles and includes
    panel boards and one main shut off.
    May be supplied with trailer as mobile unit or used at a permanent location.

     

    Optional Components
    • Circuit breakers
    • Automatic Transfer Switch
    • Motor Starters
    • Contractors
    • Junction Boxes
    • Control Stations
    • Meter/Instrument Enclosures
    • Ground Detection
    • Panelboards
    • Welding and Convenience Receptacles
    • Photo Cells
    • Light Fixtures
    • Transformers
    • Space Heaters

     

     

    Killark Distribution Equipment DE.pdf

     

     

     

     

      

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Killark, GFCS시리즈, Distribution Equipment, Ground Fault Control Station, Factory Sealed, DE25

     

    안녕하세요 TIATIP 입니다.

     

    오늘 이 시간에는 분산제어 장치중 하나인 Groud Fault Control Station에 대하여 살펴보도록 하겠습니다.

     

     

     

    Applications
    GFCS Series of Ground Fault Control Stations are used for the additional
    safety of personnel, and for equipment protection in remote areas.

    Features
    • Factory Sealed Ground Fault Chamber. (Assemblies in Group B areas must be sealed within 6" of enclosure. Other area classifications do not require the use of seals)
    • 1" NPT top and bottom conduit openings
    • External Push-to-Test Button and Pilot Light for monitoring
    • On-Off-Trip-Reset External Handle can be locked in On-Off positions
    • 5ma Ground Fault Circuit Breaker for People Protection. 30ma Ground
    Fault circuit Breaker for Equipment Protection and heat tracing circuits
    • Electrical Rating-120 VAC (single pole) 120/240 VAC (two pole) (10,000
    AIC)


    Material/Finish
    • Enclosure: Copper-free cast aluminum (less than 4/10 of 1%)
    • External Hardware: Stainless Steel
    • Standard Finish: Electrostatically applied gray powder epoxy polyester
    finish

     

     

     

     

    Killark Catalog Number (Hubbell, Killark)

    GFCS, GFCS05 ,GFCS05151,GFCS05201, GFCS05301,GFCS30, GFCS30151, GFCS30201,GFCS30301,GFCS05152,GFCS05202,GFCS05302,GFCS30152
    GFCS30202,GFCS30302

     

     

     

    Killark Distribution Equipment DE.pdf

     

     

     

     

      

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Killark Catalog 링크 - Lighting (L)

     

    안녕하세요 TIATIP 입니다.

     

    오늘 이 시간에는 킬락(Killark)사의 조명(Lighting)을 각 카테고리별로 구분짓고, 해당 시리즈별 2011년도 버전 카탈로그와의 링크로 사용자에게 도움을 드리고자 합니다.

     

     

     

    Incandescant Fixtures

     

    • NV2 Series Class I, Div.2; NEMA 4X

     

    • V Series Standard Location

     

    • V Series Class I, Div. 2; NEMA 4

     

    • V Series Accessories, Dimensions

     

    • DV Series DV Dust Ignition Proof

     

    • NVPI Series Wet Locations Class II, Div. 2 Non-Metallic/Non-Glass

     

    • EMI Series Hazardous Location NEMA 4X Groups C,D 60-300Watt Incandescent

     

    • E Series/H Series Hazardous Location Groups A,B 200-300 Watt Incandescent

     

    • H Series Replacement Parts

     

    • XHL Series Hazardous Location Handlamps 100 Watt Incandescent

     

     

     

    Compact Fluorescent

     

    • NV2F Series 13-42 Watt Quad-Pin

     

    • NVPF Series 13-26 Watt Class II, Div. 2 Non-Metallic/Non-Glass

     

    • MBF Series 13-39 Watt for Standard & Certain Hazardous Locations

     

    • MBF Series Accessories

     

    • VQ1F/VQ2F Series (Replaces VBF/VQF) 13-84 Watt for Standard & Certain Hazardous Locations

     

     • EBF/EQF Series 13-84 Watt for Hazardous Locations

     

    • XHLF Series Hazardous Location Handlamps 26 Watt Fluorescent

     

    • NWPFN Series Surface Mount Non-Metallic/Non-Glass 13-26 Watt

     

    • EBF/EQF Series 13-84 Watt for Hazardous Locations

     

     

     

    HID and Induction Fixtures

     

    • MB Series

     

    • CertiLite V Series

     

    • CertiLite V Induction

     

    • EZ Series

     

    • EM Series

     

     

     

    LED Fixtures

     

    • CertiLite MBL Series

     

    • CertiLite VM1L Series

     

    • HostileLite EML Series-Explosion-Proof LED CLI, Div.1, CL II, Div. 1, N4X

     

    • EnviroRite NVSL Series LED Signals CLI, Div.2, CL II, Div. 1, N4X Non-Metallic, Non-Glass

     

     

     

    Linear Fluorescent

     

    • DBF Series Fluorescent Class l, Div. 2

     

    • LinearLite LZ2S Series Fluorescent Stainless Steel

     

    • LinearLite LZ2N Series Fluorescent Non-Metallic Class I, Div. 2 Class II, Div. I

     

    • HFX-T Series BIAXIAL Fluorescent Class I, Div. I

     

    • HFX Series Hazardous Location- Paint spray suitable

     

    • Emergency Backed Models

     

     

     

    Floodlights and Wall Mount Fixtures

     

    • KWP Series Wallpack for Class I, Div. 2 & N4

     

    • QL Quartz Floods

     

    • KF Series Floods Aluminum Class I, Div. 2 Marine N4 150 to 1000 Watt

     

    • KF-SS MariGard stainless Class I, Div. 2 Marine N4 150-400 Watt

     

    • EM/DM Portable Floods

     

    • EZ-T Trunnion

     

     

     

    Emergency Signaling Strobe Lighting

     

    • ESX Strobe Class I, Div. 1

     

    •NVSL/NVSZ LED and XENON Non-Metallic, Non-Glass

     

     

     

    Emergency Lighting - Battery Backed

     

    • DE3B/DE4B

     

    • VE3B/VE4B VE3Q/VE4Q Class I, Div. 2/N4 Class ll/N4

     

    • EEQ Class I, Div. 1

     

    • EBB Class I, D1/N3 Halogen Lamps

     

     

     

    Battery Option Fluorescent

     

    • DBFE Linear Fluorescent Class I, D2/N4

     

    • LZ2NE/LZ2SE (FRP or SS) Class I, Div. 2 Class II, Div. 2

     

    • HFXE Class I, Div. 1

     

     

     

    Fixture Hangers and Adapters

     

    • FKA & FHC

     

    • HOOK/LOOP

     

    • FH HOOK

     

    • V Series Fixture Hangers

     

    • HXB & XFH

     

    • EKJ Series Flexible Couplings

     

    • JL & JAL

     

    • ENY-2SET Pendant Seals

     

    • VMCHVM Adapter

     

    • EAC Adapters

     

     

     

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    by TIATIP

    카테고리

    TI Story (947)
    TIA (92)
    TIP (194)
    TIEx (591)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)