'fms-technology'에 해당되는 글 34건

  1. 2013.04.07 에프엠에스(FMS) 데이터시트 다운로드 링크
  2. 2013.04.07 에프엠에스(FMS) 브로슈어 다운로드 링크
  3. 2013.04.07 EMGZ310 Digital Tension Measuring Amplifier
  4. 2013.04.07 FMS A203 Series Force Measuring Sensor
  5. 2013.01.03 FMS의 ZMGZ Force Measuring Journal의 주요특징 및 사양
  6. 2013.01.03 CR Force Measuring Roller의 주요특징 및 사양
  7. 2013.01.03 RMGZ800 Force Measuring Roller의 주요특징 및 기술사양
  8. 2013.01.03 RMGZ300 Force Measuring Roller의 주요특징 및 기술사양
  9. 2013.01.03 RMGZ100 Force Measuring Roller의 주요특징 및 기술사양
  10. 2013.01.03 PMGZ Force Measuring Bearing Block의 주요특징 및 기술사양
  11. 2013.01.03 SMGZ Force Measuring Bearing Block의 주요특징 및 기술사양
  12. 2013.01.03 UMGZ.P Force Measuring Block의 주요특징 및 기술사양
  13. 2013.01.03 CZ205 Force Measuring Journal의 주요특징 및 기술사양
  14. 2013.01.03 FA202 Force Measuring Sensor with Dead Shaft Adapter의 주요특징 및 기술사양
  15. 2013.01.03 CA203 Force Measuring Sensor의 주요특징 및 기술사양
  16. 2013.01.03 EMGZ600 Series Digital Tension Measuring Amplifier의 주요특징 및 기술사양
  17. 2013.01.03 EMGZ480 Force Measuring Amplifier with CAN-BUS® Interface의 주요특징 및 기술사양
  18. 2013.01.03 EMGZ473.W Tension Measuring Amplifiers의 주요특징 및 기술사양
  19. 2013.01.03 EMGZ474 PROFIBUS® Tension Measuring Amplifiers의 주요특징 및 기술사양
  20. 2013.01.03 EMGZ470A.W/EMGZ472A.W PROFIBUS® Tension Measuring Amplifier의 주요특징 및 기술사양
  21. 2013.01.03 EMGZ307 Extra Robust Tension Measuring Amplifier의 주요특징 및 기술사양
  22. 2013.01.03 EMGZ306A Compact Tension Measuring Amplifier의 주요특징 및 기술사양
  23. 2013.01.03 EMGZ321.EIP Left/Right Tension Measuring Amplifier with EtherNet/IP-Bus Interface의 주요특징 및 기술사양
  24. 2013.01.03 EMGZ309 Digital Tension Measuring Amplifier의 주요특징 및 기술사양
  25. 2013.01.03 EMGZ309.EIP Measuring Amplifier with EtherNet/IP Bus의 주요특징 및 기술사양
  26. 2013.01.03 CMGZ480 Controller with CAN-BUS의 주요특징 및 기술사양
  27. 2013.01.03 CMGZ309 Digital Tension Controller의 주요특징 및 기술사양
  28. 2013.01.03 ExMGZ100, ExMGZ200 ATEX Intrinsically Safe Barrier의 주요특징 및 기술사양
  29. 2013.01.03 RTMX42 Wireless Multi-channel Tension Control의 주요특징 및 기술사양
  30. 2013.01.03 RTM X42.IO Wireless Multi-channel Tension Control with Analogue Outputs의 주요특징 및 기술사양

에프엠에스(FMS) 데이터시트 다운로드 링크

 

안녕하세요 TIATIP 입니다.

FMS에서 제공하는 데이터시트를 다음과 같이 링크하였습니다. 편리하게 다운받아 사용하시기 바랍니다.

 

 

 

Force Sensors

 

A 203 Series Force Measuring Sensors

http://www.fms-technology.com/downloads/data/A203_e.pdf

 

 

AMGZ Series Force Measuring Journal

http://www.fms-technology.com/downloads/data/Amgz_e.pdf

 

 

C203 Force Measuring Sensor

http://www.fms-technology.com/downloads/data/C203_e.pdf

 

 

CA203 Force Measuring Sensor

http://www.fms-technology.com/downloads/data/CA203_e.pdf

 

 

CR Force Measuring Roller

http://www.fms-technology.com/downloads/data/CR208_e.pdf

 

 

CZ205 Force Measuring Journal

http://www.fms-technology.com/downloads/data/CZ205_e.pdf

 

 

DMGZ Load Cell

http://www.fms-technology.com/downloads/data/Dmgz_e.pdf

 

 

F202 Force Measuring Sens

http://www.fms-technology.com/downloads/data/F202_e.pdf

 

 

FA202 Force Measuring Sensor with Dead Shaft Adapter

http://www.fms-technology.com/downloads/data/FA202_e.pdf

 

 

IMGZ Series Force Measuring Roller

http://www.fms-technology.com/downloads/data/Imgz_e.pdf

 

 

LMGZ Force Measuring Bearing

http://www.fms-technology.com/downloads/data/Lmgz_e.pdf

 

 

LMGZ.D Double Range Force Measuring Bearing

http://www.fms-technology.com/downloads/data/Lmgz_D_e.pdf

 

PMGZ Force Measuring Bearing Block

http://www.fms-technology.com/downloads/data/Pmgz_e.pdf

 

 

RMGZ100 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz100e.pdf

 

 

RMGZ300 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz300_e.pdf

 

 

RMGZ400 / RMGZ600 Force Measuring Roller

http://www.fms-technology.com/downloads/data/RMGZ400_600_e.pdf

 

 

RMGZ800 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz800e.pdf

 

 

RMGZ900 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz900e.pdf

 

 

RMGZ900mini Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz900_Mini_e.pdf

 

 

SMGZ Force Measuring Bearing Block

http://www.fms-technology.com/downloads/data/Smgz_e.pdf

 

 

UMGZ Force Measuring Bearing Block

http://www.fms-technology.com/downloads/data/Umgz_e.pdf

 

 

UMGZ.P Force Measuring Block

http://www.fms-technology.com/downloads/data/UMGZ_P_e.pdf

 

 

ZMGZ Force Measuring Journal

http://www.fms-technology.com/downloads/data/Zmgz_e.pdf

 

 

 

 

 

Amplifiers

 

EMGZ 310 Digital Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ310_e.pdf

 

 

EMGZ 490 Tension Measuring Amplifier with PROFINET Interface

http://www.fms-technology.com/downloads/data/EMGZ490_e.pdf

 

 

EMGZ306A Compact Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz306_e.pdf

 

 

EMGZ307 Extra Robust Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz307_e.pdf

 

 

EMGZ309 Digital Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ309_e.pdf

 

 

EMGZ309-EIP Measuring Amplifier with EtherNet/IP Bus

http://www.fms-technology.com/downloads/data/EMGZ309-EIP_e.pdf

 

 

EMGZ321 Left/right Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ321_e.pdf

 

 

EMGZ321.EIP Left/Right Tension Measuring Amplifier with EtherNet/IP-Bus

http://www.fms-technology.com/downloads/data/EMGZ321-EIP_e.pdf

 

 

EMGZ470.D/472.D PROFIBUS® Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz470d_e.pdf

 

 

EMGZ470/472A.W PROFIBUS® Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ470_e.pdf

 

 

EMGZ473.W Tension Measuring Amplifiers

http://www.fms-technology.com/downloads/data/Emgz473474_e.pdf

 

 

EMGZ474 PROFIBUS® Tension Measuring Amplifiers

http://www.fms-technology.com/downloads/data/Emgz473474_e.pdf

 

 

EMGZ480 Force Measuring Amplifier with CAN-BUS® Interface

http://www.fms-technology.com/downloads/data/EMGZ480_e.pdf

 

 

EMGZ600 Series Digital Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz600e.pdf

 

 

 

 

 

Controllers

 

CMGZ309 Digital Tension Controller

http://www.fms-technology.com/downloads/data/CMGZ309_e.pdf

 

 

CMGZ480 Controller with CAN-BUS©

http://www.fms-technology.com/downloads/data/Cmgz480_e.pdf

 

 

 

 

 

Ex-proof

 

ExMGZ100/200.ATEX Intrinsically Safe Barrier for Zone 1

http://www.fms-technology.com/downloads/data/Exmgz_e.pdf

 

 

 

 

RTM System

 

RTM 01/02 Radio Transmitted Tension Monitoring System (multi-channel)

http://www.fms-technology.com/downloads/data/RTM_01_02_e.pdf

 

 

RTM X2 - The Cost-Effective System for Wireless Tension Control (2 channels)http://www.fms-technology.com/downloads/data/RTM_X2_e.pdf

 

 

RTM X42 Wireless Multi-channel Tension Control, System Overview

http://www.fms-technology.com/downloads/data/RTM_X32_e.pdf

 

 

RTM X42.IO Wireless Multi-channel Tension Control with Analogue Outputs

http://www.fms-technology.com/downloads/data/RTM_X42_IOs_e.pdf

 

 

RTMX 42.PC Wireless Multi-channel Tension Monitoring with PC-RTM-Software Package

http://www.fms-technology.com/downloads/data/RTM_X42_PC_e.pdf

 

 

 

 

Sensors

 

AZS01B/04B BlueFlash Optical Edge Sensor

http://www.fms-technology.com/downloads/data/Azs01_e.pdf

 

 

DLS2 Line and Edge Sensor

http://www.fms-technology.com/downloads/data/DLS2_e.pdf

 

 

US01B/04B Series Ultrasonic Edge Sensor

http://www.fms-technology.com/downloads/data/US01_e.pdf

 

 

 

 

webMASTER

 

FMS-webMASTER 020

http://www.fms-technology.com/downloads/data/webMASTER020_e.pdf

 

 

FMS-webMASTER 040

http://www.fms-technology.com/downloads/data/webMASTER040_e.pdf

 

 

FMS-webMASTER BKS015 Ultra-compact Web Guide

http://www.fms-technology.com/downloads/data/webMASTER_015_e.pdf

 

 

 

 

webDIRECTOR

 

FMS-webDIRECTOR 041/042

http://www.fms-technology.com/downloads/data/Webdirector_e.pdf

 

 

 

 

winderGLIDE

 

FMS-winderGLIDE Type D.3 Actuator

http://www.fms-technology.com/downloads/data/winderGLIDED3_e.pdf

 

 

FMS-winderGLIDE Type D.6 Actuator

http://www.fms-technology.com/downloads/data/winderGLIDED6_e.pdf

 

 

Equipment

Manual Sensor Adjustment BKS.V

http://www.fms-technology.com/downloads/data/Sensadj_e.pdf

 

 

Manual Sensor Adjustment BKS.V.A

http://www.fms-technology.com/downloads/data/Sensadj_e.pdf

 

 

 

 

Web Guide Controllers

 

BKS 309 Series Digital Web Guide Controller

http://www.fms-technology.com/downloads/data/Bks309_e.pdf

 

 

 

 

 

 

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP
태그 A203, AMGZ, ATEX, AZS01B, AZS04B, BKS.V, BKS.V.A, BKS309, C203, CA203, CMGZ309, CMGZ480, CR, CZ205, D.3, D.6, digital web guide, digital webguide, digital webguide controller, DLS2, DMGZ, EMGZ306A, EMGZ307, EMGZ309, EMGZ309-EIP, EMGZ309.EIP, EMGZ309EIP, EMGZ310, EMGZ321, EMGZ470, EMGZ470.D, EMGZ472, EMGZ472.D, EMGZ472A.W, emgz473, EMGZ473.W, EMGZ474, EMGZ480, EMGZ490, EMGZ600, equipment, ExMGZ100, ExMGZ200, F202, FA202, fms, fms a203, FMS AMGZ, FMS ATEX, fms azs01b, fms azs04b, fms bks.v, fms bks.v.a, fms bks309, FMS C203, FMS CA203, fms can-bus, FMS CMGZ309, FMS CMGZ480, fms cr, fms cz205, fms dls2, fms dmgz, FMS EMGZ306A, fms emgz307, fms emgz309, FMS EMGZ310, fms emgz321, FMS EMGZ321.EIP, FMS EMGZ470, fms emgz470.d, fms emgz472.d, fms emgz472a.w, FMS EMGZ473.W, FMS EMGZ474, FMS EMGZ480, fms emgz490, FMS EMGZ600, fms exmgz100, fms exmgz100.atex, fms exmgz200, fms exmgz200.atex, FMS F202, fms fa202, FMS IMGZ, FMS LMGZ, FMS LMGZ.D, fms pmgz, fms profibus, FMS RMGZ100, fms rmgz300., fms rmgz400, fms rmgz600, fms rmgz800, fms rmgz900mini, fms rtm, FMS RTM01, FMS RTM02, FMS RTMX2, FMS RTMX42, fms rtmx42.io, FMS RTMX42.PC, fms smgz, fms technology, fms umgz, fms umgz.p, fms us01b, fms us04b, fms webmaster, FMS ZMGZ, fms-technology, FMS-webDIRECTOR, fms-webdirector 041, fms-webdirector 042, FMS-webMASTER, fms-webmaster bks015, fms-webmaster020, fms-webmaster040, fms-winderglide type d.3, fms-winderglide type d.6, Force Measuring Journal, force measuring sensor, IMGZ, LMGZ, LMGZ.D, Load Cell, manual sensor adjustment, PMGZ, RMGZ100, RMGZ300, RMGZ400, RMGZ600, RMGZ800, RMGZ900, RMGZ900mini, RTM, RTM01, RTM02, RTMX, RTMX2, RTMX42, RTMX42.IO, RTMX42.PC, Tension Control, UMGZ, UMGZ.P, US01B, US04B, Web Guide Controllers, web guiding, webDIRECTOR041, webDIRECTOR042, WebGuiding, webMASTER020, webMASTER040, winderGLIDE, ZMGZ

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

에프엠에스(FMS) 브로슈어 다운로드 링크

 

안녕하세요 TIATIP 입니다.

 

FMS에서 제공하는 브로슈어 일체를 다음과 같이 링크하였습니다.

편리하게 다운받아 사용하시기 바랍니다.

 

 

 

 

 

 

Converting  

http://www.fms-technology.com/downloads/broschueren/FMS_Converting_e.pdf

 

 

 

Cable and Wire

http://www.fms-technology.com/downloads/broschueren/FMS_Cable_and_Wire_e.pdf

 

 

 

Metals

http://www.fms-technology.com/downloads/broschueren/FMS_Metals_e.pdf

 

 

 

Paper

http://www.fms-technology.com/downloads/broschueren/FMS_Paper_e.pdf

 

 

 

Textile

http://www.fms-technology.com/downloads/broschueren/FMS_Textil_e.pdf

 

 

 

Belt Scales

http://www.fms-technology.com/downloads/broschueren/FMS_BeltScales_e.pdf

 

 

 

 

 

 

 

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.co

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ310 Digital Tension Measuring Amplifier

 

안녕하세요 TIATIP 입니다.

 

FMS에 새롭게 출시된 Tension Measuring Amplifier를 다음과 같이 소개드립니다.

This versatile product includes latest technology and can replace the previous generation of analogue pot adjustment units. Setup is straightforward. All parameters are easily accessible via three keys. Parameter setting and value reading is extremely efficient with the alpha-numeric display.

 

 

 

 

EMGZ310 Digital Tension Measuring Amplifier

 

 

1.  Digital microprocessor controlled
High performance at fastest speeds

 

2.  3-key operation with alpha-numeric LCD
Easily readable, concise display

 

3.  Buttons for fast calibration and offset compensation
Easy to setup and operate

 

4.  Standardised analogue outputs
Connectivity with most industrial PLCs

 

 

EMGZ310 Series

The digital tension measuring amplifiers of the EMGZ 310 Series are suitable for
tension measurement with all FMS force sensors. This versatile product includes latest technology and can replace the previous generation of analogue pot adjustment units. Setup is straightforward.
All parameters are via three easily accessible keys. Parameter setting and
value reading is extremely efficient with the alpha-numeric display.

 

 

Functional Description

The mV signal generated by the force sensors is amplified and fed directly
to a high resolution A/D-converter.
Both Voltage and Current outputs are provided as standard. Functions like
signal filtering, automatic offset compensation, and gain calculation are all part
of the versatility of the EMGZ 310 Series digital amplifier.

 

 

 

 

 

 

 

 

FMS EMGZ310 Flyer.pdf

 

 

국내 기술문의 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS A203 Series Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

 

FMS에서 새롭게 선보이는 Forece Measuring Sensor A203 시리즈 입니다.

The A 203-Series Force Measuring Sensors is for use in live shaft roller applications. Their compact design and straightforward mounting concept provide new options in machines with difficult installation conditions. The installation to the machine side frame is simply accomplished with only using a single mounting screw.

 

 

 A203 Series

 

 

1. Compact Design, Easy Installation
Adaptable in machines with difficult mounting conditions

 

2. Accuracy Class 0.5 %
Highest accuracy even at low loads

 

3. Nominal Forces 50, 125, 250, 500 and 1000 N
Covers low and medium application range

 

4. Sensor Body of High Quality Aluminium
Heavy Duty, durable product with long term stability

 

 

 

A203 Series

The A 203-Series Force Measuring Sensors is for use in live shaft roller applications. Their compact design and straightforward mounting concept
provide new options in machines with difficult installation conditions.
The installation to the machine side frame is simply accomplished with
only using a single mounting screw.
The red point indicates the positive force measuring direction.
A 203 Sensors ensure highly accurate measuring results with any web
material and sizes. Their durability and operational reliability is excellent.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration
in each sensor perform the actual tension measurement. The force values
are received in the FMS measuring amplifier for further processing. The
dual flexion beam design of this sensor eliminates angular deflection under
load and ensures tension measurement with the highest accuracy and reliability. A built in mechanical hard-stop provides high overload protection for operation under the most stringent requirements. The M 8 connector enables straightforward wiring with the amplifier. The A 203-Series is compatible with the full line of FMS electronics.

 

 

A203 Series

A203.50.17

A203.125.17

A203.250.17

A203.500.17

A203.1000.17

 

 

A203 Series Acessories

50003519

50002729

50003520

50003518

50002693

50003485

7120035

50002632

 

 

 

 

 

FMS A203 Flyer.pdf

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

에프엠에스 FMS ZMGZ Force Measuring Journal

 

안녕하세요 TIATIP 입니다.

오늘은 에프엠에스(FMS)의 Force Measuring Journal 인 ZMGZ 시리즈를 소개합니다.

 

The ZMGZ series force measuring journals are used to measure the tension in continuous material processing. Force measuring journals are utilized with rollers that have an internal bearing. A bearing mounts to the bearing seat of the load cell and fits inside the roller.

 

 

 

Maker : FMS          Model : ZMGZ

 

 

에프엠에스(FMS) ZMGZ Series Force Measuring Journal

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring capability
3. Nominal forces from 100 – 3000 N - Sizes available for every application
4. Stainless steel sensor - Corrosion resistant, ultra durable

 

 

에프엠에스(FMS) ZMGZ Series

The ZMGZ Series force measuring journals are used to measure the tension in continuous material processing lines.

Force measuring journals are utilized with rollers that have an internal bearing.

A bearing mounts to the bearing seat of the load cell and fits inside the roller.
Thus the ZMGZ Series saves machine mounting space and providing a compact tension measuring roller assembly.

 

 

Functional Description
The ZMGZ Series force measuring journals utilize the flexion beam principle. When the Journal is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

 

ZMGZ Series

ZMGZ205.100

ZMGZ205.200

ZMGZ205.375

ZMGZ205.750

ZMGZ205.1500

ZMGZ207.100

ZMGZ207.200

ZMGZ207.375

ZMGZ207.750

ZMGZ207.1500

ZMGZ207.3000

 

 

ZMGZ Series Options

H14

H15

H16

H18

H21

H29

H30

 

 

 

 

 

 

FMS 에프엠에스 ZMGZ 01.pdf

 

 

내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

CR Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 CR Force Measuring Roller에 대해 알아보겠습니다.

 

The force measuring rollers of the CR208, CR210 and CR212 Series are ideal devises to measure tensions in wires, cables and narrow flat materials.

 

 

Model : CR208

 

CR 208, CR 210 and CR 212 Series Force Measuring Roller

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring range at high resolution
3. Nominal forces 50, 125, 250, 500, 1000, 1500 N - Covers a wide application range
4. Stainless steel sensor, Aluminium Cover - Corrosion resistant, ultra durable

 

 

CR 208, CR210, CR212 Series

The force measuring rollers of the CR 208, CR 210 and CR 212 Series are ideal devises to measure tensions in wires, cables and narrow flat materials. Because of their ability to accept a wide range of standard sheaves they can be utilised very flexibly. Sheave and bearing mount to the bearing seat of the load cell. The assembly of sheave and sensor to the machine frame is straight forward and quickly done. The red point at the connector indicates the positive measuring direction.

 

 

Functional Description
Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required.

 

 

CR203/CR210/CR212 Series

CR208.50

CR208.125

CR208.250

CR208.500

CR208.1000

CR208.1500

CR210.50

CR210.125

CR210.250

CR210.500

CR210.1000

CR210.1500

CR212.50

CR212.125

CR212.250

CR212.500

CR212.1000

CR212.1500

 

 

CR203/CR210/CR212 Series Options

PH

H14

H16

 

 

 

 

 

 

FMS 에프엠에스 CR208 CR210 CR212 01.pdf

 

 

내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS RMGZ800 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 RMGZ800 Force Measuring Roller 에 대해 알아보겠습니다.

 

FMS force measuring rollers of the RMGZ800 series are used to measure the tension in ropes, cables, wires and narrow web materials - made for higher forces and stability.

 

 

  Model : RMGZ800

 

RMGZ 800 Force Measuring Roller

1. Medium to high tension forces(100 – 8000 N) - Wide material processing range
2. 10 times overload protection - Recalibration is not required
3. Accuracy class 0.5 % - Wide measuring capability at high resolution
4. Lifetime lubricated ball bearings - No maintenance necessary

 

 

Functional Description

FMS force measuring roller RMGZ 800 series is used to measure the tension in wire, cable and narrow flat materials. An application specific sheave or pulley is mounted to the covering of the two lifetime lubricated ball bearings.
A mounting hole with a key-way is required in the machine frame. The key-way holds the position pin which prevents the sensor from twisting.
The location of the position pin depends on the direction of force and the position of the red point.

 

 

Measuring Principle
The force measuring rollers apply the force to the measuring web in a parallel plane as opposed to a typical bending beam. This ensures maximum accuracy and measuring sensitivity. Four foil-type strain gauges configured in a full Wheatstone Bridge are utilized to measure the material tension. A mechanical hard stop ensures the highest overload protection and makes the sensor virtually indestructible. This combination guarantees the highest accuracy and reliability without the need for recalibration.

 

 

RMGZ800 Series

RMGZ821

RMGZ822

RMGZ825

RMGZ831

RMGZ832

RMGZ834

RMGZ836

RMGZ838 

 

 

RMGZ800 Series Options

H14

H16

H18

H29

 

 

 

 

 

 

FMS 에프엠에스 RMGZ800 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ300 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 RMGZ300 Force Measuring Roller 에 관해 살펴보도록 하겠습니다.

 

The RMGZ 300 Series force measuring roller is used to measure the tension in wires, cables and similar materials. This dedicated measuring roller family was developed to work in rotating applications with high revolutions.

 

 

  Model : RMGZ300

 

 

RMGZ 300 Series Force Measuring Roller

1. Engineered to work in high revolution applications - Resistant against Centrifugal and Coriolis forces
2. 10 times overload protection - No recalibration required
3. 20: 1 force measuring range - Wide measuring capability
4. Nominal forces from 50 – 1000 N - Sizes available for every application

 

 

RMGZ300시리즈

The RMGZ 300 Series force measuring roller is used to measure the tension in wires, cables and similar materials.
This dedicated measuring roller family was developed to work in rotating applications with high revolutions. Its special design enables very effectively the compensation of centrifugal and coriolis forces. The sensor can accept a wide range of sheaves. The red point on the sensor body indicates the positive measuring direction.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required.

 

 

RMGZ300 SERIES

RMGZ315

RMGZ321

RMGZ322

RMGZ325

RMGZ331

 

 

RMGZ300 SERIES OPTIONS

H14

H21

 

 

 

 

 

 

FMS IDK RMGZ300 05.pdf

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ100 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

 

오늘은 FMS의 베스트셀러 아이템인 RMGZ100 시리즈를 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ100 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

   

 

Model : RMGZ100

 

 

RMGZ100 Force Measuring Roller

1. Nominal forces from 6N~300 N - Sizes available for every application

2. 10 times overload protection - No recalibration required

3. 20 :1 force measuring range - Wide measuring capability

4. Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ 100 Series force measuring roller is used to measure the tension
in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings

 

 

Functional Description

The RMGZ 100 Series force measuring rollers utilize the flexion beam priciple.
When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

RMGZ Series

RMGZ106A

RMGZ111A

RMGZ112A

RMGZ115A

RMGZ121A

RMGZ121.5A

RMGZ123A

 

 

RMGZ Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

PMGZ Force Measuring Bearing Block

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 PMGZ Force Measuring Bearing Block에 대해 살펴보겠습니다.

 

These force sensors are perfect for difficult ambient conditions, e.g. cooling water, wet paperpulp, high temperatures, humidity, acids and bases. They can be used in virtually any wet environment.

 

  Model : PMGZ

 

 

PMGZ Force Measuring Blocks for the Paper Industry

1. 10 times overload protection - Recalibration is not required
2. Nominal forces from 2 – 100 kN - Sizes for every application
3. Stainless steel force sensors - Permanently corrosion-resistant
4. Waterproof and Hi-Temperature capable to 120°C - Performance in a variety of environments

 

 

PMGZ

PMGZ force measuring blocks are extremely durable, accurate and reliable. Tension values as low as 5 % of the nominal force can be consistently measured with a high level of accuracy. The combination of stainless steel and mechanical overload protection makes PMGZ force measuring blocks ideal for all paper tension measuring applications.
These force sensors are perfect for difficult ambient conditions, e.g. cooling water, wet paperpulp, high temperatures and humidity.
They can be used in virtually any wet environment.
PMGZ force measuring blocks can be combined with all FMS measuring amplifiers.

 

 

Measuring Princple

The measuring force is applied to the force sensor via the plummer block. Four foil-type strain gauges configured in a full Wheatstone bridge hermetically sealed and encapsulated measure the applied forces and thus the material tension. A mechanical hard stop ensures the highest
overload protection and makes the sensor virtually indestructible.
This combination guarantees the highest accuracy and reliability without the need for recalibration.

 

 

Functional Description

The measuring force is applied to the force sensor via the plummer block.
A horizontal or vertical measuring direction (depending on the type of force measuring block) guarantees an accurate measurement of the resulting force. The red point on the force sensor indicates the measuring direction. The PMGZ force measuring blocks provide an extremely accurate and precise web tension measurement even with small wrap angles and heavy rollers.

 

 

PMGZ Series

PMGZ100

PMGZ200

PMGZ300

PMGZ400.350

PMGZ400.390

PMGZ500

 

 

 

 

 

FMS 에프엠에스 PMGZ 01.pdf

 

 

국내 기술지원 및 제품상담구매

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS SMGZ Force Measuring Bearing Block

 

안녕하세요 TIATIP 입니다.

오늘은 SMGZ Force Measuring Bearing Block에 대해 살펴보겠습니다.

 

UMG, SMGZ force sensors are used in difficult ambient conditions, e.g. hydrocarbon media like, rolling oils or in high temperatures environments. They can be used in virtually any metal strip process.

 

 

 Model : SMGZ

 

 

SMGZ Force Measuring Blocks for Metal Strips

Point 1. Overload protection, 10 times nominal measuring force - No recalibration required
Point 2. Nominal forces of 2 – 100 kN - Forces suitable for all uses
Point 3. Stainless steel force sensors - Permanently corrosion-resistant
Point 4. 24 months guarantee - High level of operational safety

 

 

SMGZ

SMGZ force measuring blocks are extremely durable, accurate and reliable.
Tension values of down to 5% of the nominal force can be measured with a high level of accuracy. The combination of stainless steel and mechanical overload protection makes SMGZ force measuring blocks ideal sensors for all tension measuring applications. Sensors are used in difficult ambient conditions, e.g. cooling water, rolling oils, high temperatures, humidity. They can be used in virtually any process, but are typically used in cold rolling plants, steel and aluminium refining and processing plants. SMGZ force measuring blocks can be combined with all FMS measuring amplifiers.

 

 

Measurement Principle
The measuring force is applied to the force sensor via the plummer block.
A Wheatstone full-bridge circuit, hermetically sealed and encapsulated and containing four foil-based strain gauges, measures the actual strip tension. This measuring signal is output to an FMS measuring amplifier for further processing.

 

 

Functional Description

The measuring force is applied to the force sensor via the plummer block.
A horizontal or vertical measuring direction (depending on the type of force measuring block) guarantees an accurate measurement of the resulting force. The red point on the force sensor indicates the measuring direction. The SMGZ force measuring blocks provide an extremely accurate and precise web tension measurement even with small wrap angles and heavy rollers.

 

 

SMGZ Series

SMGZ100

SMGZ200

SMGZ300

SMGZ400.350

SMGZ400.390

SMGZ500

 

 

SMGZ Series Options

H14

Cable protective tube with junction box

 

 

 

 

 

FMS 에프엠에스 SMGZ 01.pdf

 

 

 

국내 기술지원 및 제품상담구매

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS UMGZ.P Force Measuring Block

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 UMGZ.P Force Measuring Block에 대해 알아보도록 하겠습니다.

 

UMGZ.P force measuring blocks are a first-rate substitute for the discontinued Philips products PR 9951/52. They are with regards to the outline dimensions and mounting holes 1-to-1 compatible with the former Philips blocks. UMGZ.P blocks feature all typical characteristics of FMS products like simplicity, quality and enduring precision. They are the ideal sensors for a retrofit.

 

  Model : UMGZ.P

 

 

UMGZ.P Force Measuring Blocks

1. Drop-in replacement for Philips PR 9951/52 measuring blocks - Easy exchange without machine frame modifications
2. Overload protection 10 times nominal force - No recalibration required
3. Accuracy class 0.3 % - Highly linear measuring characteristic
4. Nominal force ratings from 1 kN (225 lbf) to 10 kN (2248 lbf) - Forces suitable for many applications
5. Stainless steel force sensor - Corrosion resistant, ultra durable

 

 

UMGZ.P Series

UMGZ.P force measuring blocks are meant to be a substitute for the discontinued Philips products PR 9951/52. The measuring blocks from FMS are with regards to the outline dimensions and mounting holes 1-to-1 compatible with the former Philips blocks. The FMS blocks feature exceptional durability and operational reliability. Constructed of stainless steel and with their high overload protection these rugged products provide accurate web tension measurement even under the most stringent requirements. They are used in any application where an easy access to and fast change of rollers is vital.

 

 

Measuring Principle

The measuring force is applied via the plummer block to the force sensor.
A Wheatstone full-bridge circuit, containing four foil-based strain gauges, measures the current strip tension. This measuring signal is received in the FMS measuring amplifier for further processing. The used measuring principle eliminates angular deflection and ensures tension measurement with the highest accuracy and reliability even at low wrap angles and with heavy rollers. The UN-22 connector enables straightforward wiring with the amplifier. The UMGZ.P sensors are compatible with the full line of FMS electronics.

 

 

Functional Description

UMGZ.P load cell and plummer block together are combined to form the measuring point – an arrangement that allows for easy mounting and fast bearing / roller change. The UMGZ.P load cells measure the horizontal force component in both directions i. e. the force in longitudinal direction, parallel to the base plate. The red point on the force sensor indicates the positive measuring direction. The UMGZ.P force measuring blocks provide an extremely accurate and precise web tension measurement even with small wrap angles and heavy rollers.

 

 

UMGZ.P Series

UMGZ.P200.1k

UMGZ.P200.2k

UMGZ.P200.5k

UMGZ.P200.10k

 

 

UMGZ.P Series Options

H14

H16

H21

 

 

 

 

 

FMS 에프엠에스 UMGZ.P 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS CZ205 Force Measuring Journal

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 CZ205 Force Measuring Journal에 대해 살펴보겠습니다.

 

The force measuring journals of the CZ 205 Series undertake the tension measurement in all kinds of continuous material processing applications

 

FMS 에프엠에스 CZ205.tif  Model : CZ205

 

 

CZ 205 Series Force Measuring Journal

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring range at high resolution
3. Nominal forces 50, 125, 250, 500, 1000, 1500 N - Covers a wide application range
4. Stainless steel sensor, aluminium cover - Corrosion resistant, ultra durable

 

 

CZ 205 Series

The force measuring journals of the CZ 205 Series undertake the tension measurement in all kinds of continuous material processing applications.
They are utilized with rollers that have an internal bearing with a bearing seat of 25 mm. The bearing mounts to the bearing seat of the load cell and fits inside the roller. This results in a compact tension measuring roller saving a lot machine mounting space.
The red point at the connector indicates the positive measuring direction.

 


Functional Description
Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required

 

 

CZ205 Series

CZ205.50

CZ205.125

CZ205.250

CZ205.500

CZ205.1000

CZ205.1500

 

 

CZ205 Series options

FL

H14

H16

 

 

 

 

 

FMS 에프엠에스 CZ205 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FA202 Force Measuring Sensor with Dead Shaft Adapter

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Dead Shaft Adapter가 있는 Force Measuring Sensor인 FA202 을 살펴보겠습니다.

 

The FA202 Series

Force Measuring Sensor is for use in dead shaft roller applications where limited space is available. The slim sensor design provides a new option for accurate web tension measurement on machines where wider sensor designs simply will not fit. The range of adapters covers the most popular shaft diameters.

 

Model : FA202

 

Functional Description
The sensor utilizes foil type strain gauges mounted in a full Wheatstone Bridge configuration to provide extremely accurate tension measurement.
The dual flexion beam design and built-in mechanical hard-stop eliminates angular deflection while reducing the possibility of recalibration or damage due to an overload condition. The connector on the sensor provides for fast wiring and easy installation, while the self-aligning bearing within the dead shaft adapter accommodates limited roller misalignment. The FA 202 Force Measuring Sensor is compatible with the full line of FMS Tension Measuring Amplifiers and Tension Controllers.

 

 

FA202 Series

F202.50

F202.125

F202.250

F202.500

 

 

FA202 Series Adapter

FA202.DI.075

FA202.DI.100

FA202.DM.20

FA202.DM.25

 

 

FA202 Series Accessories

50001930

50000558

50002226

50002227

 

 

 

 

 

FMS 에프엠에스 FA202 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS CA203 Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Force Measuring Sensor인 CA203 을 살펴보겠습니다.

 

The CA203 series is made for dead shaft applications. FMS dual flexion beam technology sensors set new benchmarks with regards to precision, reliability and economic efficiency.

 

 Model : CA203

 

 

Force Measuring Sensor with Dead Shaft Adapter

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring range at high resolution
3. Nominal forces 50, 125, 250, 500, 1000, 1500 N - Covers a wide application range
4. Stainless steel sensor, Aluminium Cover - Corrosion resistant, ultra durable

 

 

CA 203 Series

The CA 203 Series is designed as dead shaft Force Measuring Sensors to allow easy roller change in continuous material processing applications.
They can be easily mounted to the machine side frame with a single mounting screw or to the top frame utilizing optional mounting brackets.
The range adapters covers the most popular shaft diameters.
The red point at the connector indicates the positive measuring direction.
CA 203 Force Measuring Sensors ensure that even with low material wrap angles and high roller weights, tension will still be measured accurately.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required

 

 

CA203 Series

CA203.50

CA203.125

CA203.250

CA203.500

CA203.1000

CA203.1500

 

 

CA203 Series Options

PH

H14

H16

 

 

 

 

 

FMS 에프엠에스 CA203 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ600 Series Digital Tension Measuring Amplifier

 

안녕하세요 TIATIP 입니다.

 

Microprocessor controlled tension measuring amplifier for up to 4 channels with user programming keys, LCD display, robust housing and several special functions built-in.

 

 EMGZ600

 

 

EMGZ 600 Series Digital Tension Measuring Amplifiers

1. Digital Microprocessor controlled - High performance & speed capability
2. Up to 4 independent channels - Saves machine space and money
3. 4 key programming - Easy to set-up and operate
4. BUS interfacing capability - Remote connectability and integration simplicity
5. Special features built-in - Powerful and user-friendly in one package

 

 

EMGZ 600 Series

The EMGZ 600 Series digital tension measuring amplifier with large dual line LCD display, plain text in different languages, and only 4 programming keys makes this a very easy to set-up and operate measuring unit.
All parameters and functions can be set with keys or remotely via PC or BUS interface. Digital signal filtering, automatic offset calculation, automatic short circuit or cable break detection, built in gain switching facility along with all the other features creates a very powerful and userfriendly tension measuring system.

 

 

Functional Description

The EMGZ 600 Series digital tension measuring amplifier is available in 1 to 4 channel versions. They are suitable for tension measurement with almost any kind of strain gauge based force sensors.
The EMGZ 600 Series digital tension measuring amplifier is available in wall and panel mount housing. Design and function are optimised for tension measuring applications. The mV signal of the sensors is preamplified with a fixed gain and then fed directly to the A/D converter. Signal conditioning is done digitally. The 14 bit (± 8192 digits) resolution results in high accuracy across a wide force range

 

 

EMGZ600 Series

EMGZ611

EMGZ612

EMGZ613

EMGZ614

EMGZ621

EMGZ622

EMGZ642

 

 

 

 

 

FMS 에프엠에스 EMGZ600 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ480 Force Measuring Amplifier with CAN-BUS® Interface

 

안녕하세요 TIATIP 입니다.

 

In the tension measuring amplifiers of the EMGZ480 series parameter setting and data transmission are performed via an integrated CAN-Bus interface using the Open CAN CiA-DS 301® protocol. The amplifiers come in rugged, resilient aluminium housings. They were designed for dependable operation in rotating stranding machines for the most demanding environments.

 

 

 Model : EMGZ480

 

 

EMGZ 480 Measuring Amplifier with CAN-BUS® Interface

1. Microprocessor controlled - Top performance at high machine speed
2. Data transfer and parameter setting via CAN-BUS® - Easy set-up and programming
3. Compact design, protection class IP 67 - Low space requirements, easy mounting
4. Galvanically isolated - Protected against electrical noise

 

 

EMGZ 480

The digital tension measuring amplifiers EMGZ 480 are suitable for tension measurement with all FMS force sensors. Parameter setting of the amplifier as well as data transmission is performed via an integrated CAN-BUS® interface using the Open CAN CiA-DS 301® protocol. EMGZ 480 amplifiers come in rugged, resilient aluminium housings. They were designed for dependable operation in the most demanding environments. The sealed housing is rated for a protection class of IP 67.

 

The force measuring sensor gathers the tension force in the material and transmits the value as a mV signal to the electronic unit. There the mV signal is amplified and conditioned depending on the chosen configuration.
Data is transferred via the CAN-BUS® to the CAN-BUS® master.
The application dependent calculations are done by the CAN-BUS® master.
The system allows a fast and very flexible operation.

 

 

EMGZ480 Series

EMGZ480

EMGZ480.M16

 

 

EMGZ Series Options

M16

 

 

 

 

 

FMS 에프엠에스 EMGZ480 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ473.W Tension Measuring Amplifiers

 

 

안녕하세요 TIATIP 입니다.

 

Tension measuring amplifier with PROFIBUS® interface in a robust aluminium housing.

 

 Model : EMGZ473.W

 

EMGZ473.W / EMGZ474 Series
PROFIBUS® Tension Measuring Amplifier

1. Microprocessor controlled - High performance and speed
2. Functions parameterized via PROFIBUS® - Easy set-up and programming
3. Compact design, IP 67 / DIN Rail - Low space requirements, easy mounting
4. Galvanically isolated - Protected against electrical noise

 

 

EMGZ473.W, EMGZ474 Series

The digital tension measuring amplifiers EMGZ 473.W / EMGZ 474 are suitable for tension measurement with all FMS force sensors. The complete operation is done by the integrated PROFIBUS® connection.
The cover of the EMGZ 473.W housing has an electrical design identical to the PROFIBUS® standard plug on the EMGZ 474. This allows disconnection of the measuring amplifier from PROFIBUS® without disrupting the bus line.


The mV signal of the sensors is pre-amplified with a fixed gain and then fed directly to the A/D converter. Signal conditioning is done digitally. The PROFIBUS® interface provides flexible signal processing by the control unit.

For maximum flexibility, two different PROFIBUS® operating modes are possible:
„Feedback with status“ (4 data byte) and „Full Control“ (6 data byte).

 

EMGZ473.W Series, EMGZ474 Series

EMGZ473.W

EMGZ474

 

 

 

 

FMS 에프엠에스 EMGZ473 EMGZ474 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

 www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ474 PROFIBUS® Tension Measuring Amplifiers

 

안녕하세요 TIATIP 입니다.

 

Tension measuring amplifier with PROFIBUS® interface made for DIN rail assembly.

 

 Model : EMGZ474

 

EMGZ474 Series PROFIBUS® Tension Measuring Amplifier

1. Microprocessor controlled - High performance and speed
2. Functions parameterized via PROFIBUS® - Easy set-up and programming
3. Compact design, IP 67 / DIN Rail - Low space requirements, easy mounting
4. Galvanically isolated - Protected against electrical noise

 

 

EMGZ474 Series PROFIBUS® Tension Measuring Amplifier

The digital tension measuring amplifiers EMGZ 473.W / EMGZ 474 are suitable for tension measurement with all FMS force sensors. The complete operation is done by the integrated PROFIBUS® connection. The cover of the EMGZ 473.W housing has an electrical design identical to the PROFIBUS® standard
plug on the EMGZ 474. This allows disconnection of the measuring amplifier from PROFIBUS® without disrupting the bus line.


The mV signal of the sensors is pre-amplified with a fixed gain and then fed directly to the A/D converter. Signal conditioning is done digitally. The PROFIBUS® interface provides flexible signal processing by the control unit.

For maximum flexibility, two different PROFIBUS® operating modes are possible:
„Feedback with status“ (4 data byte) and „Full Control“ (6 data byte).

 

 

 

 

 

FMS 에프엠에스 EMGZ473 EMGZ474 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ470A.W/EMGZ472A.W PROFIBUS® Tension Measuring Amplifier

 

안녕하세요 TIATIP 입니다.

 

The EMGZ470/472 is a single channel, digital tension measuring amplifier with integrated PROFIBUS® interface.

 

 EMGZ470A.W

 

EMGZ 470 A.W/472 A.W PROFIBUS® Tension Measuring Amplifier

1. Microprocessor controlled - High performance and speed
2. Functions parameterized via PROFIBUS® - Easy set-up and programming
3j. IP 67 aluminium housing - Can be used in harsh environments
4. Galvanically isolated - Protected against electrical noise

 

 

Functional Description

The EMGZ 470A.W/472A.W digital tension measuring amplifiers are suitable for tension measurement with all FMS force sensors.

The complete operation is performed by the integrated PROFIBUS® connection.

Design and function are optimized for tension measuring applications.
The mV signal of the sensors are pre-amplified with a fixed gain and then fed directly to the A/D converter. Signal conditioning is done digitally.
The PROFIBUS® interface provides flexible signal processing by the control unit. For maximum flexibility, two different PROFIBUS® operating modes are possible:„Feedback with status“ (3 data bytes) and „Full Control“ (6 data bytes).

 

 

 

 

FMS 에프엠에스 EMGZ470AW EMGZ472AW 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ307 Extra Robust Tension Measuring Amplifier

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Extra Robust Tension Measuring Amplifier 인 EMGZ307을 살펴보겠습니다.

 

The EMGZ 307 series is a single channel analogue tension measuring amplifier in a robust, sealed aluminium housing.

 

 

 Model : EMGZ307

 

 

EMGZ 307 Series Tension Measuring Amplifier

1. IP67 aluminium housing - Can be used in harsh enviroments
2. No programming required - Easy to setup
3. Standardised analogue outputs - Multiconnectable with PLC, Display etc.
4. Galvanically isolated - Protected against electrical noise
5. Utilises SMT Hybrid technology - Durability, Stability, and Upgradability

 

 

Functional description

The EMGZ 307 Series is a single channel analogue tension measuring amplifier based on a hybrid circuit.
There can be 1 or 2 force sensors connected. All settings are done with 10-turn trimmers which are easily accessible. Additional jumpers allow the system to operate with fixed gain and offset (when operating with PLC or PC). For filtering the output signals, capacitors can be added. The IP 67 aluminium housing is designed specifically for use in harsh conditions.

 

 

 

 

FMS 에프엠에스 EMGZ307 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ306A Compact Tension Measuring Amplifier

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Amplifier 가운데 베스트셀러인 EMGZ306A를 소개하고자 합니다.

 

The EMGZ306A series is a single channel analogue tension measuring amplifier.

 

 Model : EMGZ306A

 

1.  No programming required - Easy to setup

2.  Standardised analogue outputs - Multiconnectable with PLC, Display etc.

3.  Galvanically isolated - Protected against electrical noise

4.  DIN rail mount - Easy to mount in cabinet

5. Gain and offset setting by 20-turn trimmers - Precise adjustment guaranteed

 

 

FMS EMGZ306A Series

The EMGZ 306A Series is a single channel analogue tension measuring
amplifier. There can be two force sensors connected. All settings are
done with 20-turn trimmers which are easily accessible from the front.
The amplifier outputs are standardized ± 10 V tension output and 0…20 mA or 4…20 mA current output (switchable by jumpers).

 

For filtering of the output signals capacitors can be added.
As options 10 VDC sensor supply voltage and compound-filled versions
with additional vibration protection are available. The compound-filled version is used for rotating applications such as stranding machines, etc.

 

 

FMS EMGZ306A.CAL

This version provides a pushbutton to simulate 50 % of the nominal sensor
load. This allows to do the calibration of the amplifier by calculation instead
of physical simulation of the tension.

 

 

 

 

 

FMS 에프엠에스 EMGZ306A 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ321.EIP Left/Right Tension Measuring Amplifier with EtherNet/IP-Bus Interface

안녕하세요 TIATIP 입니다.

 

오늘은 FMS의 이터넷통신 및 IP버스통신이 가능한 Tension Measuring Amplifier 인 EMGZ321.EIP를 알아보겠습니다.

 

EMGZ321.EIP amplifiers are an innovative enhancement of the successful EMGZ321 series. With a built-in EtherNet/IP field bus the electronics offers data transfer with cycle times down to 2ms. The fast data rates enable real time tension control over Ethernet. This two channel strain gauge amplifier measures the material tension on both sides of the roller independently. Thus it is possible to monitor the load distribution over the measuring roller with great accuracy.

 

 Model : EMGZ321.EIP

 

 

1.  Separate force evaluation for left and right - Precise tension monitoring over the measuring roller

2.  Integrated EtherNet/IP fieldbus - Straightforward integration in an Ethernet network and possibility of real time control over the field bus

3. Freely configurable digital inputs and outputs - Provides special monitoring functions and flexibility for application changes.

4.  3 housing / mounting options - DIN Rail, Wall Mount (IP65), and panel mount

 

 

EMGZ321.EIP

EMGZ321.EIP amplifiers are an innovative enhancement of the successful EMGZ321 series. With a built-in EtherNet/IP field bus the electronics offers data transfer with cycle times down to 2ms. The fast data rates enable real time tension control over the bus. The EMGZ321.EIP, a left/right strain gauge amplifier, measures the material tension on both sides of the roller independently. Thus it is possible to monitor the load distribution over the measuring roller with great accuracy. The EMGZ321 series can be used in connection with all FMS force sensors.

 

 

Functional Description

The mV signals generated by the force sensors are amplified and conditioned in the EMGZ309.EIP amplifier. The whole signal processing is fully digitised.
Data is transferred via the EtherNet/IP bus to a central machine control or PLC
where data processing and application dependent calculations are carried out.
The EIP interface provides an efficient integration and configuration of the
tension amplifiers in a EtherNet network.

 

 

 

 

FMS 에프엠에스 EMGZ321.EIP 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ309 Digital Tension Measuring Amplifier

안녕하세요 TIATIP 입니다.

오늘은 FMS의 디지털타입 Tension Measuring Amplifier를 알아보겠습니다.

 

Digital plug & play amplifier with Ethernet capability. Parameter set-up is carried out either via the 3 keys or through a web browser.

 

Model : EMGZ309

 

 

EMGZ 309 Tension Measuring Amplifier

1.  Digital microprocessor controlled - High performance at fastest speeds
2.  3 key operation and two-line LCD - Easy to setup and operate
3.  3 housing /mounting types - DIN Rail, wall mount (IP 65) and panel mount
4.  Plug & Play or utilize Web Browser connection - Easy to operate and provides flexible set-up

 

 

EMGZ 309

The digital tension measuring amplifiers of the EMGZ 309 Series are suitable for tension measurement with all FMS force sensors. This versatile product comes as a plug & play replacement for analogue pot twisting units and is very easy to setup. More advanced users can access all the internal parameters via the 3 keys or through a Web Browser.
 

 

Functional Description

The mV signal generated by the sensors is amplified and fed directly to a high resolution A/D-converter. Both Volt and Current outputs are provided standard.
Functions like signal filtering, automatic offset compensation, and gain calculation are all part of the versatility of EMGZ 309 digital amplifier series.
The Web Browser provides an efficient and fast way for parameter setting.

 

 

 

 

 

FMS 에프엠에스 EMGZ309 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

EMGZ309.EIP Measuring Amplifier with EtherNet/IP Bus

안녕하세요 TIATIP 입니다.

 

오늘 이시간에는 FMS의 이더넷 아이피버스통신을 활용한 Measuring Amplifier를 소개해 드립니다.

 

All FMS tension measuring amplifiers are fully compatible with all FMS force sensors and tension controllers. They are specially adapted to measurements of dynamic processes.

 

 

 Model : EMGZ309.EIP

 

 

EMGZ309.EIP amplifiers are an innovative enhancement of the successful 309 series. They are available with a built-in field bus based on EtherNet/IP technology (CIPTM Common Industrial Protocol IEC61158). The popular EtherNet/IP bus offers data transfer with cycle times of ≥2ms. The fast data rates enable real time tension control over the fieldbus.

 

EMGZ309.EIP Series

1.  Integrated EtherNet/IP Field Bus - Straightforward integration in EtherNet
network, possibility of real time control over the field bus

2.  Plug & play or utilize EtherNet/IP Bus - Fast set-up or full utilization of extended parameter set

3.  Three housing / mounting options - DIN Rail, Wall Mount (IP65), and panel mount

4.  Polyvalent and powerful - Quick change-over of manufacturing processes, continues monitoring of relevant production parameters

 

Functional Description

The mV signals generated by the force sensors are amplified and conditioned in the EMGZ309.EIP amplifier. The whole signal processing is fully digitised.
Data is transferred via the EtherNet/IP bus to a central machine control or PLC
where data processing and application dependent calculations are carried out.
The EIP interface provides an efficient integration and configuration of the
tension amplifiers in a EtherNet network.

 

 

 

 

FMS 에프엠에스 EMGZ309 EIP 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

CMGZ480 Controller with CAN-BUS©

안녕하세요 TIATIP 입니다.

오늘은 FMS의 CAN BUS통신을 활용한 컨트롤러 CMGZ480을 알아봅니다.

 

Thanks to its specific features the controller CMGZ480 is ideally suited for fast application e.g. in stranding machines. They were designed for dependable operation in the most demanding environments. The rugged, resilient aluminium housings is sealed and rated for a protection class of IP67.

 

 Model : CMGZ480

 

 

CMGZ480 Digital Tension Controller with CAN-BUS® Interface

1.  PID Controller with 2 ms cycle time -High performance and fast reaction time
2.  Functions parameterized via CAN-BUS® - Easy set-up and programming
3.  Compact design, IP 67 Protection - Low space requirements, easy mounting
4.  Galvanically isolated - Protected against electrical noise

 

 

CMGZ480

The digital tension controllers CMGZ 480 can be used with all FMS force sensors. Thanks to its specific features the controller is ideally suited for fast application e.g. in stranding machines. CMGZ 480 controllers come in rugged, resilient aluminium housings. They were designed for dependable operation in the most demanding environments. The sealed housing is rated for a protection class of IP 67.

 

 

Functional Description

Design und functionality of the CMGZ480 is optimised for tension control.

The tension force values are fed to the controller via a fast A/D converter.

Signal processing and controlling tasks are performed digitally.

This results in excellent long term temperature stability and control performance.

The CMGZ480 operates on a 2 millisecond cycle time for fast reaction and high performance. Parameter setting as well as data transmission is performed via an integrated CAN-BUS® interface using the Open CAN CiA-DS 301 protocol.

 

 

 

 

FMS 에프엠에스 CMGZ480 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Tension Controllers for Web Tension, CMGZ309 Digital Tension Controller

 

안녕하세요 TIATIP 입니다.

 

오늘 이시간에는 FMS의 CMGZ309 컨트롤러에 대해 알아보겠습니다.

 

All FMS tension controllers are fully compatible with all FMS force sensors and tension measuring amplifiers. They are specially adapted to measurements of dynamic processes.

 

  Model : CMGZ309

 

The CMGZ309 tension controller responds to a broad range of missions. Its field of application is in production lines where moving web products are manufactured, processed or finished. All internal parameters are also accessible through a web browser. The CMGZ309 is a versatile and economic PID tension controller that solves even your most demanding control tasks.

 

 

CMGZ 309 Digital Tension Controller

1.  Plug & Play or utilize Ethernet connection Easy to operate and provides flexible set-up
2.  Configurable for brake and drive applications, for unwind and rewind stands One controller can handle all functions
3.  3 housing / mounting options DIN Rail, Wall Mount (IP 65), and panel mount
4.  All-in-One version CMGZ 309.W.B.ACV With built-in break amplifier 24V or 90V and supply unit

 

 

Functional Description

Design und functionality of the CMGZ 309 series is optimised for precise close loop tension control. It offers selectable control of unwind brake or drive, intermediate drive, or rewinding drive.
Signal processing and controlling tasks are fully digitalised. This results in an excellent long term temperature stability and control performance. The CMGZ 309 operates on a 1 millisecond cycle time. Its fast reaction time, digital signal filtering, automatic offset calculation, built in taper tension option and automatic start-up ramping function along with a lot of other features creates a very powerful and user-friendly tension control system.

 

 

 

 

FMS 에프엠에스 CMGZ309 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

ExMGZ100/ExMGZ200.ATEX Intrinsically Safe Barrier for Zone 1

안녕하세요 TIATIP 입니다.

오늘은 방폭환경에서 요구되는 Amplifier 제품을 소개드리도록 하겠습니다.

 

The ExMGZ100/200.ATEX intrinsically safe barrier for zone 1 can be used with any FMS amplifier, controller and force sensor.

 

 Model : ExMGZ100

 

The ExMGZ100/200.ATEX intrinsically safe barrier is used for applications in intrinsically safe or explosion-proof environments. It is designed for single or double channel tension measurement and is placed between amplifier respectively controller and force sensor.

 

 

ExMGZ 100 / 200.ATEX Intrinsically Safe Barrier

1.  ATEX certified - Approval II (2) GD [EEx ib] IIB / IIC
2.  Compensation of voltage drop over zener barrier - Full sensor excitation voltage, high precision
3.  Two independent intrinsically safe inputs - For 1 or 2 sensors
4.  Circuit and power supply galvanically isolated - Shielded from electrical noise

 

 

Functional description

The ExMGZ 100/200.ATEX intrinsically safe barrier utilizes a zener limiter on the force sensor side. It controls the voltage to the force sensor while preventing over voltage. A zener barrier is provided for each channel on the intrinsically safe side. Therefore the explosion proof area remains safe from hazardous voltage levels while still allowing the tension measurement or control to perform in the process. A control circuit ensures that the voltage drop of the zener barrier is compensated and it is guaranteed that the full excitation voltage is provided to the force sensors.

 

 

 

 

FMS 에프엠에스 EXMGZ 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RTMX42 Wireless Multi-channel Tension Control, System Overview

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Tension Contrl을 위한 무선시스템에 대해 전반적으로 살펴보도록 하겠습니다.

 

The FMS RTM system (radio transmitted tension monitoring system) is the first tension measurement system for rotating applications which doesn't require any sliprings. Find information about applications of the RTM system.

 

 Model : RTMX42

 

 

The RTMX42 utilizes force sensors to measure the tension of individual wires or strands, and transmits this data wirelessly from the rotating to the static part of the machine. The new RTMX42 series is available in 5 variants for pure monitoring solutions or for tension control via a PLC. A sophisticated range of interface options allows a quickly and efficiently integrations into the existing communication and control infrastructure of the stranding machine. RTMX42 is primarily suitable for Cage or Tubular Stranders.

 

 

 

 

FMS 에프엠에스 RTMX42 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RTM X42.IO Wireless Multi-channel Tension Control with Analogue Outputs

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 아나로그출력을 내장한 멀티채널형 Tension Control을 소개드립니다.

 

 

 Model : RTMX42.IO

 

The RTMX42.IO series utilizes force sensors to measure the tension of individual wires or strands, and transmits this data wirelessly from the rotating to the static part of the machine. Analogue outputs can interface a PLC or equivalent devices for controlling purposes. Designed as a flexible multi-channel system, RTMX42.IO is primarily suitable for Cage or Tubular Stranding Machines with up to 42 pay-off stations.

 

 

 

 

FMS 에프엠에스 RTMX42IO 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)