에프엠에스(FMS) 데이터시트 다운로드 링크

 

안녕하세요 TIATIP 입니다.

FMS에서 제공하는 데이터시트를 다음과 같이 링크하였습니다. 편리하게 다운받아 사용하시기 바랍니다.

 

 

 

Force Sensors

 

A 203 Series Force Measuring Sensors

http://www.fms-technology.com/downloads/data/A203_e.pdf

 

 

AMGZ Series Force Measuring Journal

http://www.fms-technology.com/downloads/data/Amgz_e.pdf

 

 

C203 Force Measuring Sensor

http://www.fms-technology.com/downloads/data/C203_e.pdf

 

 

CA203 Force Measuring Sensor

http://www.fms-technology.com/downloads/data/CA203_e.pdf

 

 

CR Force Measuring Roller

http://www.fms-technology.com/downloads/data/CR208_e.pdf

 

 

CZ205 Force Measuring Journal

http://www.fms-technology.com/downloads/data/CZ205_e.pdf

 

 

DMGZ Load Cell

http://www.fms-technology.com/downloads/data/Dmgz_e.pdf

 

 

F202 Force Measuring Sens

http://www.fms-technology.com/downloads/data/F202_e.pdf

 

 

FA202 Force Measuring Sensor with Dead Shaft Adapter

http://www.fms-technology.com/downloads/data/FA202_e.pdf

 

 

IMGZ Series Force Measuring Roller

http://www.fms-technology.com/downloads/data/Imgz_e.pdf

 

 

LMGZ Force Measuring Bearing

http://www.fms-technology.com/downloads/data/Lmgz_e.pdf

 

 

LMGZ.D Double Range Force Measuring Bearing

http://www.fms-technology.com/downloads/data/Lmgz_D_e.pdf

 

PMGZ Force Measuring Bearing Block

http://www.fms-technology.com/downloads/data/Pmgz_e.pdf

 

 

RMGZ100 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz100e.pdf

 

 

RMGZ300 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz300_e.pdf

 

 

RMGZ400 / RMGZ600 Force Measuring Roller

http://www.fms-technology.com/downloads/data/RMGZ400_600_e.pdf

 

 

RMGZ800 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz800e.pdf

 

 

RMGZ900 Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz900e.pdf

 

 

RMGZ900mini Force Measuring Roller

http://www.fms-technology.com/downloads/data/Rmgz900_Mini_e.pdf

 

 

SMGZ Force Measuring Bearing Block

http://www.fms-technology.com/downloads/data/Smgz_e.pdf

 

 

UMGZ Force Measuring Bearing Block

http://www.fms-technology.com/downloads/data/Umgz_e.pdf

 

 

UMGZ.P Force Measuring Block

http://www.fms-technology.com/downloads/data/UMGZ_P_e.pdf

 

 

ZMGZ Force Measuring Journal

http://www.fms-technology.com/downloads/data/Zmgz_e.pdf

 

 

 

 

 

Amplifiers

 

EMGZ 310 Digital Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ310_e.pdf

 

 

EMGZ 490 Tension Measuring Amplifier with PROFINET Interface

http://www.fms-technology.com/downloads/data/EMGZ490_e.pdf

 

 

EMGZ306A Compact Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz306_e.pdf

 

 

EMGZ307 Extra Robust Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz307_e.pdf

 

 

EMGZ309 Digital Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ309_e.pdf

 

 

EMGZ309-EIP Measuring Amplifier with EtherNet/IP Bus

http://www.fms-technology.com/downloads/data/EMGZ309-EIP_e.pdf

 

 

EMGZ321 Left/right Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ321_e.pdf

 

 

EMGZ321.EIP Left/Right Tension Measuring Amplifier with EtherNet/IP-Bus

http://www.fms-technology.com/downloads/data/EMGZ321-EIP_e.pdf

 

 

EMGZ470.D/472.D PROFIBUS® Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz470d_e.pdf

 

 

EMGZ470/472A.W PROFIBUS® Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/EMGZ470_e.pdf

 

 

EMGZ473.W Tension Measuring Amplifiers

http://www.fms-technology.com/downloads/data/Emgz473474_e.pdf

 

 

EMGZ474 PROFIBUS® Tension Measuring Amplifiers

http://www.fms-technology.com/downloads/data/Emgz473474_e.pdf

 

 

EMGZ480 Force Measuring Amplifier with CAN-BUS® Interface

http://www.fms-technology.com/downloads/data/EMGZ480_e.pdf

 

 

EMGZ600 Series Digital Tension Measuring Amplifier

http://www.fms-technology.com/downloads/data/Emgz600e.pdf

 

 

 

 

 

Controllers

 

CMGZ309 Digital Tension Controller

http://www.fms-technology.com/downloads/data/CMGZ309_e.pdf

 

 

CMGZ480 Controller with CAN-BUS©

http://www.fms-technology.com/downloads/data/Cmgz480_e.pdf

 

 

 

 

 

Ex-proof

 

ExMGZ100/200.ATEX Intrinsically Safe Barrier for Zone 1

http://www.fms-technology.com/downloads/data/Exmgz_e.pdf

 

 

 

 

RTM System

 

RTM 01/02 Radio Transmitted Tension Monitoring System (multi-channel)

http://www.fms-technology.com/downloads/data/RTM_01_02_e.pdf

 

 

RTM X2 - The Cost-Effective System for Wireless Tension Control (2 channels)http://www.fms-technology.com/downloads/data/RTM_X2_e.pdf

 

 

RTM X42 Wireless Multi-channel Tension Control, System Overview

http://www.fms-technology.com/downloads/data/RTM_X32_e.pdf

 

 

RTM X42.IO Wireless Multi-channel Tension Control with Analogue Outputs

http://www.fms-technology.com/downloads/data/RTM_X42_IOs_e.pdf

 

 

RTMX 42.PC Wireless Multi-channel Tension Monitoring with PC-RTM-Software Package

http://www.fms-technology.com/downloads/data/RTM_X42_PC_e.pdf

 

 

 

 

Sensors

 

AZS01B/04B BlueFlash Optical Edge Sensor

http://www.fms-technology.com/downloads/data/Azs01_e.pdf

 

 

DLS2 Line and Edge Sensor

http://www.fms-technology.com/downloads/data/DLS2_e.pdf

 

 

US01B/04B Series Ultrasonic Edge Sensor

http://www.fms-technology.com/downloads/data/US01_e.pdf

 

 

 

 

webMASTER

 

FMS-webMASTER 020

http://www.fms-technology.com/downloads/data/webMASTER020_e.pdf

 

 

FMS-webMASTER 040

http://www.fms-technology.com/downloads/data/webMASTER040_e.pdf

 

 

FMS-webMASTER BKS015 Ultra-compact Web Guide

http://www.fms-technology.com/downloads/data/webMASTER_015_e.pdf

 

 

 

 

webDIRECTOR

 

FMS-webDIRECTOR 041/042

http://www.fms-technology.com/downloads/data/Webdirector_e.pdf

 

 

 

 

winderGLIDE

 

FMS-winderGLIDE Type D.3 Actuator

http://www.fms-technology.com/downloads/data/winderGLIDED3_e.pdf

 

 

FMS-winderGLIDE Type D.6 Actuator

http://www.fms-technology.com/downloads/data/winderGLIDED6_e.pdf

 

 

Equipment

Manual Sensor Adjustment BKS.V

http://www.fms-technology.com/downloads/data/Sensadj_e.pdf

 

 

Manual Sensor Adjustment BKS.V.A

http://www.fms-technology.com/downloads/data/Sensadj_e.pdf

 

 

 

 

Web Guide Controllers

 

BKS 309 Series Digital Web Guide Controller

http://www.fms-technology.com/downloads/data/Bks309_e.pdf

 

 

 

 

 

 

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP
태그 A203, AMGZ, ATEX, AZS01B, AZS04B, BKS.V, BKS.V.A, BKS309, C203, CA203, CMGZ309, CMGZ480, CR, CZ205, D.3, D.6, digital web guide, digital webguide, digital webguide controller, DLS2, DMGZ, EMGZ306A, EMGZ307, EMGZ309, EMGZ309-EIP, EMGZ309.EIP, EMGZ309EIP, EMGZ310, EMGZ321, EMGZ470, EMGZ470.D, EMGZ472, EMGZ472.D, EMGZ472A.W, emgz473, EMGZ473.W, EMGZ474, EMGZ480, EMGZ490, EMGZ600, equipment, ExMGZ100, ExMGZ200, F202, FA202, fms, fms a203, FMS AMGZ, FMS ATEX, fms azs01b, fms azs04b, fms bks.v, fms bks.v.a, fms bks309, FMS C203, FMS CA203, fms can-bus, FMS CMGZ309, FMS CMGZ480, fms cr, fms cz205, fms dls2, fms dmgz, FMS EMGZ306A, fms emgz307, fms emgz309, FMS EMGZ310, fms emgz321, FMS EMGZ321.EIP, FMS EMGZ470, fms emgz470.d, fms emgz472.d, fms emgz472a.w, FMS EMGZ473.W, FMS EMGZ474, FMS EMGZ480, fms emgz490, FMS EMGZ600, fms exmgz100, fms exmgz100.atex, fms exmgz200, fms exmgz200.atex, FMS F202, fms fa202, FMS IMGZ, FMS LMGZ, FMS LMGZ.D, fms pmgz, fms profibus, FMS RMGZ100, fms rmgz300., fms rmgz400, fms rmgz600, fms rmgz800, fms rmgz900mini, fms rtm, FMS RTM01, FMS RTM02, FMS RTMX2, FMS RTMX42, fms rtmx42.io, FMS RTMX42.PC, fms smgz, fms technology, fms umgz, fms umgz.p, fms us01b, fms us04b, fms webmaster, FMS ZMGZ, fms-technology, FMS-webDIRECTOR, fms-webdirector 041, fms-webdirector 042, FMS-webMASTER, fms-webmaster bks015, fms-webmaster020, fms-webmaster040, fms-winderglide type d.3, fms-winderglide type d.6, Force Measuring Journal, force measuring sensor, IMGZ, LMGZ, LMGZ.D, Load Cell, manual sensor adjustment, PMGZ, RMGZ100, RMGZ300, RMGZ400, RMGZ600, RMGZ800, RMGZ900, RMGZ900mini, RTM, RTM01, RTM02, RTMX, RTMX2, RTMX42, RTMX42.IO, RTMX42.PC, Tension Control, UMGZ, UMGZ.P, US01B, US04B, Web Guide Controllers, web guiding, webDIRECTOR041, webDIRECTOR042, WebGuiding, webMASTER020, webMASTER040, winderGLIDE, ZMGZ

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS A203 Series Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

 

FMS에서 새롭게 선보이는 Forece Measuring Sensor A203 시리즈 입니다.

The A 203-Series Force Measuring Sensors is for use in live shaft roller applications. Their compact design and straightforward mounting concept provide new options in machines with difficult installation conditions. The installation to the machine side frame is simply accomplished with only using a single mounting screw.

 

 

 A203 Series

 

 

1. Compact Design, Easy Installation
Adaptable in machines with difficult mounting conditions

 

2. Accuracy Class 0.5 %
Highest accuracy even at low loads

 

3. Nominal Forces 50, 125, 250, 500 and 1000 N
Covers low and medium application range

 

4. Sensor Body of High Quality Aluminium
Heavy Duty, durable product with long term stability

 

 

 

A203 Series

The A 203-Series Force Measuring Sensors is for use in live shaft roller applications. Their compact design and straightforward mounting concept
provide new options in machines with difficult installation conditions.
The installation to the machine side frame is simply accomplished with
only using a single mounting screw.
The red point indicates the positive force measuring direction.
A 203 Sensors ensure highly accurate measuring results with any web
material and sizes. Their durability and operational reliability is excellent.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration
in each sensor perform the actual tension measurement. The force values
are received in the FMS measuring amplifier for further processing. The
dual flexion beam design of this sensor eliminates angular deflection under
load and ensures tension measurement with the highest accuracy and reliability. A built in mechanical hard-stop provides high overload protection for operation under the most stringent requirements. The M 8 connector enables straightforward wiring with the amplifier. The A 203-Series is compatible with the full line of FMS electronics.

 

 

A203 Series

A203.50.17

A203.125.17

A203.250.17

A203.500.17

A203.1000.17

 

 

A203 Series Acessories

50003519

50002729

50003520

50003518

50002693

50003485

7120035

50002632

 

 

 

 

 

FMS A203 Flyer.pdf

 

 

국내 기술지원 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ400/RMGZ600 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘은 에프엠에스 FMS의 Force Measuring Roller 가운데 RMGZ400과 RMGZ600 을 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ400/600 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

 

  Model : RMGZ400

 

 

RMGZ 400 and RMGZ 600  Series Force Measuring Roller

1. Nominal forces from 60 – 4000 N - Wide material processing range
2. 10 times overload protection - Recalibration is not required
3. 50 : 1 force measuring range - Wide measuring capability at high resolution
4. Lifetime lubricated ball bearings built-in - No maintenance necessary

 

 

RMGZ 400 and RMGZ 600

FMS force measuring roller RMGZ 400/600 series are used to measure the tension in wires, cables and narrow flat materials. An application specific sheave is mounted to the covering of the lifetime lubricated ball bearings.
A mounting hole with a key-way is required in the machine frame.
The key-way holds the position pin which prevents the sensor from twisting. The location of the position pin depends on the direction of force and the position of the red point.

 

 

Functional Description

The force measuring rollers RMGZ 400/600 work based on an enhanced bending beam principal. This ensures maximum accuracy and high measuring sensitivity. Four foiltype strain gauges configured in a full Wheatstone Bridge are utilized to measure the material tension. A mechanical hard stop ensures the highest overload protection and makes the sensor virtually indestructible. This combination provides highest accuracy and reliability without the need for recalibration.

 

 

RMGZ400, RMGZ600 Series

RMGZ400

RMGZ416B

RMGZ421B

RMGZ422B

RMGZ425B

RMGZ600

RMGZ631B

RMGZ632B

RMGZ634B

 

 

RMGZ400, RMGZ600 Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ400 RMGZ600 01.pdf

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ100 Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

 

오늘은 FMS의 베스트셀러 아이템인 RMGZ100 시리즈를 살펴보겠습니다.

 

FMS force measuring rollers of the RMGZ100 series are used to measure the tension in ropes, cables, wires and narrow web materials.

 

   

 

Model : RMGZ100

 

 

RMGZ100 Force Measuring Roller

1. Nominal forces from 6N~300 N - Sizes available for every application

2. 10 times overload protection - No recalibration required

3. 20 :1 force measuring range - Wide measuring capability

4. Lifetime lubricated ball bearings - No maintenance necessary

 

 

RMGZ100 Series

The RMGZ 100 Series force measuring roller is used to measure the tension
in wire, cable and similar materials. An application specific sheave or pulley is mounted to the two lifetime lubricated ball bearings

 

 

Functional Description

The RMGZ 100 Series force measuring rollers utilize the flexion beam priciple.
When the roller is subjected to a force, bending stress is applied to the measuring web. Four foil-type strain gauges in a full Wheatstone bridge configuration measure the bending and thus the material tension. The position of the red point depends on the application. If the force acts in the direction of the red point, positive values will result from the measuring amplifier output.

 

RMGZ Series

RMGZ106A

RMGZ111A

RMGZ112A

RMGZ115A

RMGZ121A

RMGZ121.5A

RMGZ123A

 

 

RMGZ Series Options

H14

H16

 

 

 

 

 

FMS 에프엠에스 RMGZ100 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

RMGZ900mini Force Measuring Roller

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 RMGZ900mini Force Measuring Roller에 대해 알아보겠습니다.

 

The RMGZ900mini series sensors are designed as self contained cantilever mount sensors that minimise machine space requirements in narrow material processing applications.

 

 

  Model : RMGZ9000mini

 

 

RMGZ 900 mini Series Force Measuring Roller

Point 1. 10 times overload protection - Recalibration is not required
Point 2. 20 : 1 force measuring range - Wide measuring capability
Point 3. Parallel plane / double flexion beam design - Material position and measurement consistent
Point 4. Stainless steel sensor, anodised roller - Corrosion resistant, ultra-durable

 

 

Functional Description

The RMGZ 900 mini Series sensors are designed as self contained cantilever mount sensors that minimise machine space requirements in narrow material processing applications. They can be mounted horizontally or vertically directly to the machine frame. The red point on the base of the sensor indicates the positive measuring direction. Even with low material wrap angles, the design of the RMGZ 900 mini Series offers high accuracy measuring capability.

 

 

Measuring Principle
Foil type strain gauges mounted in a full Wheastone Bridge configuration perform the actual tension measurement. The dual flexion beam design ensures accurate measurement at any position on the roller while maintaining the parallel position of the material and eliminating angular deflection. A built in mechanical hard-stop provides high overload protection ensuring that recalibration is not required.

 

 

RMGZ900 mini Series

RMGZ912.100.40.E

RMGZ915.100.40.E

RMGZ921.100.40.E

RMGZ922.100.40.E

RMGZ915.150.40.E

RMGZ921.150.40.E

RMGZ922.150.40.E

RMGZ915.200.40.E

RMGZ921.200.40.E

RMGZ922.200.40.E

 

 

RMGZ900 Series Options

H14

H29

 

 

RMGZ900 Series Mounting Flange

RMGZ900.581699

RMGZ900.582185

 

 

 

 

 

 

FMS 에프엠에스 RMGZ900mini 01.pdf

 

 

 

국내 기술영업 및 제품구매상담

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FA202 Force Measuring Sensor with Dead Shaft Adapter

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Dead Shaft Adapter가 있는 Force Measuring Sensor인 FA202 을 살펴보겠습니다.

 

The FA202 Series

Force Measuring Sensor is for use in dead shaft roller applications where limited space is available. The slim sensor design provides a new option for accurate web tension measurement on machines where wider sensor designs simply will not fit. The range of adapters covers the most popular shaft diameters.

 

Model : FA202

 

Functional Description
The sensor utilizes foil type strain gauges mounted in a full Wheatstone Bridge configuration to provide extremely accurate tension measurement.
The dual flexion beam design and built-in mechanical hard-stop eliminates angular deflection while reducing the possibility of recalibration or damage due to an overload condition. The connector on the sensor provides for fast wiring and easy installation, while the self-aligning bearing within the dead shaft adapter accommodates limited roller misalignment. The FA 202 Force Measuring Sensor is compatible with the full line of FMS Tension Measuring Amplifiers and Tension Controllers.

 

 

FA202 Series

F202.50

F202.125

F202.250

F202.500

 

 

FA202 Series Adapter

FA202.DI.075

FA202.DI.100

FA202.DM.20

FA202.DM.25

 

 

FA202 Series Accessories

50001930

50000558

50002226

50002227

 

 

 

 

 

FMS 에프엠에스 FA202 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

 

F202 Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Force Measuring Sensor인 F202 을 살펴보겠습니다.

 

The F202 Series Force Measuring Sensor is for use in live shaft roller applications where limited space is available. Their slim design provides a new option for accurate web tension measurement on machines where wider sensor designs simply did not fit. The sensor is easily mounted to the machine side frame with two shoulder bolts.

 

  Model : F202

 

 

F 202 Series Force Measuring Sensor

1. Ultra Slim Design - Adaptable in machines with difficult space conditions
2. 30 : 1 Force Measuring Range - Accurate measurements also at low loads
3. Accuracy Class 0.3 % - Highly linear measuring characteristic
4. Nominal Forces 50, 125, 250 and 500 N - Covers low and medium application range
5. Sensor body of stainless steel - Corrosion resistant, ultra durable

 

 

F202 Series

The F 202 Series Force Measuring Sensor is for use in live shaft roller applications where limited space is available. Their slim design provides a new option for accurate web tension measurement on machines where wider sensor designs simply did not fit. The high-performance F 202 Force Measuring Sensor ensures that even with low material wrap angles and high roller weights, tension will still be measured accurately. Their durability and operational reliability is excellent. The sensor is easily mounted to the machine side frame with two shoulder bolts. The red point located on the body of the sensor indicates the positive force measuring direction.

 

 

Functional Description

The sensor utilizes foil type strain gauges mounted in a full Wheatstone Bridge configuration to provide extremely accurate tension measurement. The dual flexion beam design and built-in mechanical hard-stop eliminates angular
deflection while reducing the possibility of recalibration or damage due to an overload condition. The connector on the sensor provides for faster wiring and installation, while the recommended self-aligning bearing accommodates
limited roller misalignment. The F 202 Force Measuring Sensor is compatible with the full line of FMS Tension Measuring Amplifiers and Tension Controllers

 

 

F202 Series

F202.50

F202.125

F202.250

F202.500

 

 

F202 Series Accessrories

50001930

50000558

50002226

50002227

 

 

 

 

 

FMS 에프엠에스 F202 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS CA203 Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Force Measuring Sensor인 CA203 을 살펴보겠습니다.

 

The CA203 series is made for dead shaft applications. FMS dual flexion beam technology sensors set new benchmarks with regards to precision, reliability and economic efficiency.

 

 Model : CA203

 

 

Force Measuring Sensor with Dead Shaft Adapter

1. 10 times overload protection - No recalibration required
2. 20 : 1 force measuring range - Wide measuring range at high resolution
3. Nominal forces 50, 125, 250, 500, 1000, 1500 N - Covers a wide application range
4. Stainless steel sensor, Aluminium Cover - Corrosion resistant, ultra durable

 

 

CA 203 Series

The CA 203 Series is designed as dead shaft Force Measuring Sensors to allow easy roller change in continuous material processing applications.
They can be easily mounted to the machine side frame with a single mounting screw or to the top frame utilizing optional mounting brackets.
The range adapters covers the most popular shaft diameters.
The red point at the connector indicates the positive measuring direction.
CA 203 Force Measuring Sensors ensure that even with low material wrap angles and high roller weights, tension will still be measured accurately.

 

 

Functional Description

Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required

 

 

CA203 Series

CA203.50

CA203.125

CA203.250

CA203.500

CA203.1000

CA203.1500

 

 

CA203 Series Options

PH

H14

H16

 

 

 

 

 

FMS 에프엠에스 CA203 01.pdf

 

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

FMS C203 Force Measuring Sensor

 

안녕하세요 TIATIP 입니다.

오늘은 FMS의 Force Measuring Sensor인 C203 을 살펴보겠습니다.

 

The dual flexion beam sensors of the C203 series set new benchmarks with regards to precision, reliability and economic efficiency.

 

 

  Model : C203

 

C203 Series Force Measuring Sensor

1. 10 times overload protection - No re-calibration required
2. 20 : 1 force measuring range - Accuracy class 0.5 %
3. Nominal forces 50, 125, 250, 500, and 1000 N. - Covers a wide application range
4. Stainless steel sensor, Aluminium Cover - Corrosion resistant, ultra durable

 

 

C203 Series

The C 203 Series Force Measuring Sensors are designed as live shaft sensors to allow easy roller change in continuous material processing applications. They can be easily mounted to the machine side frame with the included mounting screws or to the top frame utilizing an optional mounting bracket. The red point on the connector indicates the positive measuring direction. The C 203 Force Measuring Sensor ensures that even with low material wrap angles and high roller weights, tension will still be measured accurately.


 

Functional Description
Foil type strain gauges mounted in a full Wheatstone Bridge configuration in each sensor perform the actual tension measurement. The dual flexion beam design eliminates angular deflection under load and ensures tension measurement with the highest accuracy and reliability under the most stringent requirements. A built in mechanical hard-stop provides high overload protection and ensures that frequent calibration is not required.

 

 

FMS C203 Series

C203.50.17

C203.127.17

C203.250.17

C203.500.17

C203.1000.17

 

 

FMS C203 Series Options

FL

H14

H16

 

 

 

 

 

FMS 에프엠에스 C203 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

LMGZ Force Measuring Bearing

 

안녕하세요 TIATIP 입니다.

 

오늘은 에프엠에스 FMS의 Force Measuring Bearing인 LMGZ 시리즈를 살펴보겠습니다.

LMGZ시리즈는 국내 산업철강분야 즉, Metal, Steel & Iron 분야는 물론 타이어산업 분야등에서 많이 사용되고 있습니다.

 

제품은 아래 설명과 같이 FAG가 FMS로 거듭나는 시기에 FAG의 MGZ시리즈가 FMS의 LMGZ 시리즈로 재탄생한 것입니다.

 

FMS was founded in 1993, following a buyout from the FAG Kugelfischer company. Since that time, a dedicated team has been establishing its own company history in the web tension and web guiding industry through market-leading developments and successful international expansion. Today, FMS is the company of choice for manufacturers and users of web processing equipment around the globe. Success has been achieved in a wide cross-section of industries, processes, and materials.

 

The LMGZ series tension sensors offer the highest accuracy, reliability, and durability in the industry. The ultra flat sensor can be used in the most stringent space conditions.

 

 Model : LMGZ Series

 

 

Force Measuring Sensors (Load Cells) for Web Tension Control

All FMS force measuring sensors are characterised by its highest overload protection and its designated accuracy. It is achieved by a mechanical hardstop and four foil-type strain gauges in a full wheatstone bridge configuration. The red point on the outside of the sensor indicates the positive measuring direction. Most FMS force measuring sensors are also available as vacuum sensors.

 

 

LMGZ Series

LMGZ200

LMGZ201

LMGZ203

LMGZ205

LMGZ307

LMGZ310

LMGZ313

 

LMGZ Series Options 

H10

H13

H14

H15

H16

H18

H19

H21

H29

H30

 

 

 

 

FMS 에프엠에스 LMGZ 01.pdf

 

 

국내 기술지원 및 상담구매처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (948)N
TIA (92)
TIP (194)
TIEx (592)N
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)