'tiatip'에 해당되는 글 451건

  1. 2014.12.17 Chalmit ARRAN Exn LED Floodlight 기술사양
  2. 2014.12.08 T&B Fittings, Rigid and Intermediate Metal Conduit Fittings, Locknuts 기술사양
  3. 2014.11.12 T&B TnB Wiring Duct Cover TY3CPG6 사양소개
  4. 2014.11.12 T&B TnB Wiring Duct TY3X3WPG6 사양소개
  5. 2014.11.12 T&B TnB Wiring Duct Cover TY2CPG6 사양소개
  6. 2014.11.12 T&B TnB Wiring Duct TY2X3WPG6 사양소개
  7. 2014.11.07 T&B Ring Terminal RCT713 기술사양
  8. 2014.11.07 T&B Ring Terminal RCT863 기술사양
  9. 2014.11.07 T&B Ring Terminal RCT363 기술사양
  10. 2014.11.07 T&B Ring Terminal RBT873 기술사양
  11. 2014.11.07 T&B Ring Terminal RBT863 기술사양
  12. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Sterling II HF Stainless Steel Surface Mounted Fluorescent 사양소개
  13. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Curie Luminaire Recessible Fluorescent 사양소개
  14. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Sterling II Stainless Steel Luminaire Surface Mounted Fluorescent 사양소개
  15. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Sterling II High Frequency Luminaire Surface Mounted Fluorescent 사양소개
  16. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Sterling II Luminaire Surface Mounted Fluorescent 사양소개
  17. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Acclaim Luminaire Recessible Fluorescent 사양소개
  18. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Protecta Stainless Steel Luminaire 사양소개
  19. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Protecta Emergency Luminaire 사양소개
  20. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개
  21. 2014.11.01 Chalmit Light 샬밋라이트 Industrial Fluorescent 제품라인업 소개
  22. 2014.11.01 Chalmit Light 샬밋라이트 Zone 2 Fluorescent 제품라인업 소개
  23. 2014.11.01 Chalmit Light 샬밋라이트 Zone 1 Fluorescent 제품라인업 소개
  24. 2014.11.01 Chalmit Light 샬밋 Fluorescent 제품라인업 소개
  25. 2014.10.21 Chalmit 샬밋 Solas LED Floodlight 기술사양
  26. 2014.10.21 Chalmit 샬밋 487 EPDM Floodlight 기술사양
  27. 2014.10.21 Chalmit 샬밋 458 EPDM Floodlight 기술사양
  28. 2014.10.21 Chalmit 샬밋 800 Series Floodlight 기술사양
  29. 2014.10.10 Chalmit 샬밋 비방폭 일반산업형 Bulkhead 라인업 소개
  30. 2014.10.10 Chalmit 샬밋 방폭위험지역 Zone2에 적용되는 Bulkhead 라인업 소개

Chalmit ARRAN Exn LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Chalmit에서 새롭게 선보이는 LED Floodlight 인 ARRAN Series에 대해 함께 살펴보고자 합니다.

 

 

 

Chalmit Lighting

Exn LED Floodlighting

ARRAN

ATEX Category3

Zone2 & Zone22 Applications

 

 

 

The Arran LED floodlight range is low energy with an instant on output and 80,000 maintenance free hours to L70 (70% initial lumens). Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used in locations where flammable vapours, gases or combustible dusts exist.

 

 

Chalmit ARRAN Series - Technical Data & Std. Cat. No.

 

Arran LED Exn Zone2 201408XX.pdf

 

ARRN/06L/LE,ARRN/10L/LE,ARRN/11L/LE,ARRN/15L/LE

ARRN06LLE,ARRN10LLE,ARRN11LLE,ARRN15LLE

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B Fittings, Rigid and Intermediate Metal Conduit Fittings, Locknuts 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Thomas&Betts의 Rigid and Intermediate Metal Conduit Fittings 제품군 가운데 Locknuts 와 관련하여 함께 살펴보도록 하겠습니다.

 

 

 

 

Thomas&Betts

TnB

T&B Fittings

Rigid and Intermediate Metal Conduit Fittings

 

 

1. Locknuts

Available in your choice of steel/malleable iron or aluminum.

• Steel from 1⁄4" to 2" and malleable iron from 21⁄2" to 6"
• Aluminum 624 in all sizes

 

 

 

 

2. Sealing Locknuts

Provides positive seal against water and oil.

• For use with rigid and intermediate metal conduits or fittings
• Provides watertight or raintight seal at all enclosures

 

 

 

 

3. Bonding Locknuts

Ensures positive bonding of conduit to box and prevents loosening due to vibration!

• Steel or malleable iron (steel through 2")
• Can be used anywhere an ordinary locknut is installed
• Also can be used for Service Entrance applications in conformance with code
• T&B rigid conduit and EMT (thinwall) fittings comply with Federal Specification A-A-50553

 

Technical Data & Std. Cat No.

 

ECPS A TnB Fittings Vol1 Locknuts 2007XXXX Section A.pdf

 

139,140,141,142,143,144,145,146,147,148,149,150,151,152,153,

141AL,142AL,143AL,144AL,145AL,146AL,147AL,148AL,149AL,

150AL,151AL,152AL, 153AL,141-SST,142-SST,143-SST,144-SST,

145-SST,146SST,141SST,142SST,143SST, 144SST,145SST,146SST,

141SL, 142SL, 143SL, 144SL, 145SL, 146SL,

106,107,108,109,110,111,112,113,114,115

 

△ Notice : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

 

  

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B TnB Wiring Duct Cover TY3CPG6 사양소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Thomas&Betts 의 Wiring Duct Cover가운데 TY3CPG6 사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

 

Thomas&Betts

T&B TnB Catalog Number : TY3CPG6

Wiring Duct Cover 

 

 

 

 

Features

- Wide fingers and slots increase rigidity and enable insertion of bundles. V-Shaped slot lead-in enables easier and faster wire installation. Rounded edges keep hands and wires free of abrasion.

- Non-slip cover does not slide easily and resists vibration. Flush cover attaches flush with sidewall for finished look.

- Dual score lines are designed to yield clean breakoffs at the base of the slot and the duct. Versatile North American and DIN Standard mounding holes enables same duct for multiple applications

 

 

 

 

Catalog Number must be completed by adding suffix G for Gray, W for White, B for Black, I for Intrinsic Blue. To order Adhesive-Backed duct, add suffix A. To order duct without mounting holes, add suffix NM to catalog number. Contact Customer Service for pricing and availability

 

 

 

 

Standard lengths are 6 feet

 

 

 

 

 

 

 

T&B TnB Wiring Duct Cover TY3CPG6 Technical Data

TY3CPG6.pdf

TnB Tyduct Overview.pdf

TnB Tyduct Specifications.pdf

TnB Tyduct Technical wideslot.pdf

TnB Tyduct Drawing.pdf

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

  

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B TnB Wiring Duct TY3X3WPG6 사양소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Thomas&Betts 의 Wiring Duct 가운데 TY3X3WPG6 사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

Thomas&Betts

T&B TnB Catalog Number : TY3X3WPG6

Wiring Duct

 

 

 

 

Features

- Wide fingers and slots increase rigidity and enable insertion of bundles. V-Shaped slot lead-in enables easier and faster wire installation. Rounded edges keep hands and wires free of abrasion.

- Non-slip cover does not slide easily and resists vibration. Flush cover attaches flush with sidewall for finished look.

- Dual score lines are designed to yield clean breakoffs at the base of the slot and the duct. Versatile North American and DIN Standard mounding holes enables same duct for multiple applications

 

 

 

 

 

Catalog Number must be completed by adding suffix G for Gray, W for White, B for Black, I for Intrinsic Blue. To order Adhesive-Backed duct, add suffix A. To order duct without mounting holes, add suffix NM to catalog number. Contact Customer Service for pricing and availability

 

 

 

 

Standard lengths are 6 feet

 

 

 

 

  

T&B TnB Wiring Duct TY3X3WPG6 Technical Data

TY3X3WPG6.pdf

TnB Tyduct Overview.pdf

TnB Tyduct Specifications.pdf

TnB Tyduct Technical wideslot.pdf

TnB Tyduct Drawing.pdf

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B TnB Wiring Duct Cover TY2CPG6 사양소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Thomas&Betts 의 Wiring Duct Cover가운데 TY2CPG6 사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

Thomas&Betts

T&B TnB Catalog Number : TY2CPG6

Wiring Duct Cover

 

 

 

 

Features

- Wide fingers and slots increase rigidity and enable insertion of bundles. V-Shaped slot lead-in enables easier and faster wire installation. Rounded edges keep hands and wires free of abrasion.

- Non-slip cover does not slide easily and resists vibration. Flush cover attaches flush with sidewall for finished look.

- Dual score lines are designed to yield clean breakoffs at the base of the slot and the duct. Versatile North American and DIN Standard mounding holes enables same duct for multiple applications

 

 

 

 

Catalog Number must be completed by adding suffix G for Gray, W for White, B for Black, I for Intrinsic Blue. To order Adhesive-Backed duct, add suffix A. To order duct without mounting holes, add suffix NM to catalog number. Contact Customer Service for pricing and availability

 

Standard lengths are 6 feet

 

 

 

 

 

T&B TnB Wiring Duct Cover TY2CPG6 Technical Data

TY2CPG6.pdf

TnB Tyduct Overview.pdf

TnB Tyduct Specifications.pdf

TnB Tyduct Technical wideslot.pdf

TnB Tyduct Drawing.pdf

 

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B TnB Wiring Duct TY2X3WPG6 사양소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 Thomas&Betts 의 Wiring Duct 가운데 TY2X3WPG6 사양에 대해 살펴보도록 하겠습니다.

 

 

 

Thomas&Betts

T&B TnB Catalog Number : TY2X3WPG6

Wiring Duct

 

 

Features

- Wide fingers and slots increase rigidity and enable insertion of bundles. V-Shaped slot lead-in enables easier and faster wire installation. Rounded edges keep hands and wires free of abrasion.

- Non-slip cover does not slide easily and resists vibration. Flush cover attaches flush with sidewall for finished look.

- Dual score lines are designed to yield clean breakoffs at the base of the slot and the duct. Versatile North American and DIN Standard mounding holes enables same duct for multiple applications

 

 

 

Catalog Number must be completed by adding suffix G for Gray, W for White, B for Black, I for Intrinsic Blue. To order Adhesive-Backed duct, add suffix A. To order duct without mounting holes, add suffix NM to catalog number. Contact Customer Service for pricing and availability

 

 

Standard lengths are 6 feet

 

 

 

 

T&B TnB Wiring Duct TY2X3WPG6 Technical Data

TY2X3WPG6.pdf

TnB Tyduct Overview.pdf

TnB Tyduct Specifications.pdf

TnB Tyduct Technical wideslot.pdf

TnB Tyduct Drawing.pdf

 

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B Ring Terminal RCT713 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 T&B(TnB)의 Ring Terminal RCT713 제품에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

 

 

T&B

Ring Termianl

T&B Catalog Number : RCT713

Description : Insulated Flouropolymer Ring Terminal For Wire Range 12-10 Stud Size 1/4, Clear/Yellow Stripe

  

 

 

 

Features

Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams.

  

 

 

 

 

Technical Data

RCT713.pdf

TnB StaKon Overview.pdf

StaKon Wireguie.pdf

TnB Tool Chart.pdf

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B Ring Terminal RCT863 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 T&B(TnB)의 Ring Terminal RCT863 제품에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

 

 

T&B

Ring Termianl

T&B Catalog Number : RCT863

Description : Insulated Flouropolymer Ring Terminal For Wire Range 12-10 Stud Size #8, Clear/Yellow Stripe

 

 

 

 

 

Features

Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams.

 

 

 

 

Technical Data

RCT863.pdf

TnB StaKon Overview.pdf

StaKon Wireguie.pdf

TnB Tool Chart.pdf

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다.

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B Ring Terminal RCT363 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 T&B(TnB)의 Ring Terminal RCT363 제품에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

 

 

T&B

Ring Termianl

T&B Catalog Number : RCT363

Description : Insulated Flouropolymer Ring Terminal For Wire Range 12-10 Stud Size #10, Clear/Yellow Stripe

 

 

 

 

 

 

 

Features

Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams.

 

 

 

 

 

 

 

Technical Data

RCT363.pdf

TnB StaKon Overview.pdf

StaKon Wireguie.pdf

TnB Tool Chart.pdf

 

 

FYI : Specification are subject to change without notice.

소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해해주시기 바랍니다. 기타 상세한 상담은 전문대리점을 통해 진행해 주시기 바랍니다. 고맙습니다. 

 

 

 

 

 

  

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B Ring Terminal RBT873 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 T&B(TnB)의 Ring Terminal RBT873 제품에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

T&B

Ring Termianl

T&B Catalog Number : RBT873

Description : Insulated Flouropolymer Ring Terminal For Wire Range 16-14 Stud Size #10, Clear/Blue Stripe

 

 

 

 

 

Features

Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams

 

 

 

 

 

 

Technical Data

RBT873.pdf

TnB StaKon Overview.pdf

StaKon Wireguie.pdf

TnB Tool Chart.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

  

국내 상담문의 및 기술지원

CUSTOMER  SUCCESS  IDK

deric@jadongwha.com

http://www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

T&B Ring Terminal RBT863 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 T&B(TnB)의 Ring Terminal RBT863 제품에 대해 살펴보도록 하겠습니다.

 

 

 

T&B

Ring Termianl

T&B Catalog Number : RBT863

Description : Insulated Flouropolymer Ring Terminal For Wire Range 16-14 Stud Size #8, Clear/Blue Stripe

 

 

 

Features

Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams.

 

 

 

 

Technical Data

RBT863.pdf

TnB StaKon Overview.pdf

StaKon Wireguie.pdf

TnB Tool Chart.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com       

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Sterling II HF Stainless Steel Surface Mounted Fluorescent 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Sterling II HF Stainless Steel Surface Mounted Fluorescent  사양에 대해 살펴보도록 하겠습니다.

   

 

Chalmit

Sterling II HF Stainless Steel

Surface Mounted Fluorscent 

  

 

 

 

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas, available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic control gear, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.
 

 

 

 

CAT Ref.

SS2I/118/BI,

SS2I/118/BI/EM

SS2I/118/EM/HF

SS2I/136/BI/HF

SS2I/136/BI/EM

SS2I/136/BI/EM/HF

SS2I/158/BI

SS2I/158/BI/EM

SS2I/158/BI/EM/HF

SS2I/218/BI

SS2I/218/BI/EM

SS2I/218/BI/EM/HF

SS2I/218/BI/HF

SS2I/236/BI

SS2I/236/BI/EM

SS2I/236/BI/EM/HF

SS2I/236/BI/HF

SS2I/258/BI

SS2I/258/BI/EM

SS2I/258/BI/EM/HF

SS2I/258/BI/HF

S3004-100001

S3004-100003

S3004-100004

SPOL4-100004

SPOL4-100005

SPOL4-100005

 

 

Technical Data

Sterling IISSHF Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 및 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.   

 

 

 

 

  

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Curie Luminaire Recessible Fluorescent 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Curie Luminaire Recessible Fluorescent  사양에 대해 살펴보도록 하겠습니다.

  

 

 

Chalmit

Curie Luminaire

Recessible Fluorscent 

  

 

 

 

The Curie range of fluorescents is available in normal and emergency versions is designed purposely for use industrial applications where  recessible emergency lighting is required. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with the textured side facing downwards. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light output and duration in accordance with emergency lighting standards and comprehensice battery management & automatic self-testing is available as an option. 
  

 

 

 

CAT Ref.

CURI/218/BI

CURI/218/BI/EM

CURI/236/BI

CURI/236/BI/EM

CURI/418/BI

CURI/418/BI/EM

CURI/436/BI

CURI/436/BI/EM

 

 

Technical Data

Curie Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

  

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Sterling II Stainless Steel Luminaire Surface Mounted Fluorescent 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Sterling II Stainless Steel Luminaire Surface Mounted Fluorescent  사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

 

Chalmit

Sterling II Stainless Steel Luminaire

Surface Mounted Fluorscent 

 

 

 

 

The Sterling II luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a copper & iron switchstart ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Highfrequency ballast (HF), please refer to the appropriate product page for details.

  

 

 

 

CAT Ref.

SS2I/118/BI

SS2I/118/BI/EM

SS2I/118/BI/EM/HF

SS2I/118/BI/HF

SS2I/136/BI

SS2I/136/BI/EM

SS2I/136/BI/EM/HF

SS2I/136/BI/HF

SS2I/158/BI

SS2I/158/BI/EM

SS2I/158/BI/EM/HF

SS2I/158/BI/HF

SS2I/218/BI

SS2I/218/BI/EM

SS2I/218/BI/EM/HF

SS2I/218/BI/HF

SS2I/236/BI

SS2I/236/BI/EM

SS2I/236/BI/EM/HF

SS2I/236/BI/HF

SS2I/258/BI

SS2I/258/BI/EM

SS2I/258/BI/EM/HF

SS2I/258/BI/HF

S3004-100001

S3004-100003

S3004-100004

SPOL4-100004

SPOL4-100005

SPOL4-100006

 

 

Technical Data

Sterling IISS Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다

 

 

 

  

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Sterling II High Frequency Luminaire Surface Mounted Fluorescent 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Sterling II High Frequency Luminaire Surface Mounted Fluorescent  사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit

Sterling II High Frequency Luminaire

Surface Mounted Fluorscent 

 

 

 

 

 

The Sterling II is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a 230/240V 50Hz copper and iron ballast as standard, available in 18W, 36W and 58W fluorescent lamp options. Other supply voltage options are available.

Emergency models have an internal Ni-Cad battery.
Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with high frequency electronic ballast; please refer to the Sterling II HF product page for details.

  

 

CAT Ref.

SS2I/118/BI

SS2I/118/BI/EM

SS2I/118/BI/EM/HF

SS2I/118/BI/HF

SS2I/136/BI

SS2I/136/BI/EM

SS2I/136/BI/EM/HF

SS2I/136/BI/HF

SS2I/158/BI

SS2I/158/BI/EM

SS2I/158/BI/EM/HF

SS2I/158/BI/HF

SS2I/218/BI

SS2I/218/BI/EM

SS2I/218/BI/EM/HF

SS2I/218/BI/HF

SS2I/236/BI

SS2I/236/BI/EM

SS2I/236/BI/EM/HF

SS2I/236/BI/HF

SS2I/258/BI

SS2I/258/BI/EM

SS2I/258/BI/EM/HF

SS2I/258/BI/HF

S3004-100001

S3004-100003

S3004-100004

SPOL4-100004

SPOL4-100005

SPOL4-100006 

NPRO4-0008

NPRO4-0012

NPRO4-0022

 

 

 

Technical Data

Sterling IIHF Industrial.pdf

 

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

  

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Sterling II Luminaire Surface Mounted Fluorescent 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Sterling II Luminaire Surface Mounted Fluorescent  사양에 대해 살펴보도록 하겠습니다.

 

Chalmit

Sterling II Luminaire

Surface Mounted Fluorscent

 

  

 

 

 

 

The Sterling II is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a 230/240V 50Hz copper and iron ballast as standard, available in 18W, 36W and 58W fluorescent lamp options. Other supply voltage options are available.

Emergency models have an internal Ni-Cad battery.
Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with high frequency electronic ballast; please refer to the Sterling II HF product page for details.
 

 

 

 

CAT Ref.

ST2I/118/BI

ST2I/118/BI/EM

ST2I/118/BI/EM/HF

ST2I/118/BI/HF

ST2I/136/BI

ST2I/136/BI/EM

ST2I/136/BI/EM/HF

ST2I/136/BI/HF

ST2I/158/BI

ST2I/158/BI/EM

ST2I/158/BI/EM/HF

ST2I/158/BI/HF

ST2I/218/BI

ST2I/218/BI/EM

ST2I/218/BI/EM/HF

ST2I/218/BI/HF

ST2I/236/BI

ST2I/236/BI/EM

ST2I/236/BI/EM/HF

ST2I/236/BI/HF

ST2I/258/BI

ST2I/258/BI/EM

ST2I/258/BI/EM/HF

ST2I/258/BI/HF

NPRO4-0008

NPRO4-0012

NPRO4-0022

S3004-100001

S3004-100003

S3004-100004

SPOL4-100004

SPOL4-100005

SPOL4-100006

 

 

Technical Data

Sterling II Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Acclaim Luminaire Recessible Fluorescent 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Acclaim Luminaire Recessible Fluorescent  사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

 

 

Chalmit

Acclaim Luminaire

Recessible Fluorscent

 

  

 

 

The Acclaim recessible lighting range is suitable for a range of industry standard ceiling types. Available as both emergency and non-emergency versions, the Acclaim can be used with 18W or 36W fluorescent lamps. The Acclaim has an IP ratnig of IP54 and is also certified to for use in fire resistant ceilings up to solas B15 rating.

 

Teh polycarbonate diffuser is aviable in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed. 

 

The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light ouput and duration in accordance with emergency lighting standards.

 

ATEX Category 2 (Zone 1) hazardous area versions are available.

 

 

 

CAT Ref.

ACLI/218/BI

ACLI/218/BI/EM

ACLI/236/BI

ACLI/236/BI/EM

 

 

Technical Data

Acclaim Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Stainless Steel Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Stainless Steel Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit

Protecta Stainless Steel Luminaire

Surface Mounted Fluorscent

 

 

 

 

The Protecta industrial fluorescent is available with a stainless steel body. Protecta has excellent durability as it is constructed using high grade 316S31 stainless steel and a polycarbonate diffuser. A standard non-emergency and emergency versions are available in both 18W and 36W lamp options.

The product is intended for industrial applications where chemical agents are present which could attack GRP bodied luminaires. The stainless steel enclosure affords a high degree of ingreas protection (IP66/67). Its design also utilised the Protecta's key features providing ease of access to lamps and control gear. This ensures that installation and maintenance will be completed quickly and efficiently.

The Emergency version is also available complete with 3 hour Ni-Cad battery back-up.

 

 

 

 

CAT Ref.

PRSI/118/BI

PRSI/118/BI/EM

PRSI/136/BI

PRSI/136/BI/EM

PRSI/218/BI

PRSI/218/BI/EM

PRSI/236/BI

PRSI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

ProtectaSS Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Emergency Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Emergency Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit

Protecta Emergency Luminaire

Surface Mounted Fluorscent

 

 

 

 

 

 

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions.

As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

The Protecta Emergency comes complete with integral three hour Ni-Cd battery backup. The incoming mains supply to the luminaire has the facility for two live supplies: continuous live (Lc) which supplies constant power to the battery and switched live (Ls) which is for external switching, allowing the luminaire to be locally switched off without the emergency battery pack unintentionally operating the lamps.

If external switching is not required Lc and Ls are made common at the mains terminal block. ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available.

 

 

 

 

CAT Ref.

PRGI/118/BI

PRGI/118/BI/EM

PRGI/136/BI

PRGI/136/BI/EM

PRGI/218/BI

PRGI/218/BI/EM

PRGI/236/BI

PRGI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

ProtectaE Emergency Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

Chalmit

Protecta Luminaire

Surface Mounted Fluorscent

 

 

 

 

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

CAT REF.

PRGI/118/BI

PRGI/118/BI/EM

PRGI/136/BI

PRGI/136/BI/EM

PRGI/218/BI

PRGI/218/BI/EM

PRGI/236/BI

PRGI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

Protecta Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Industrial Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 일반산업환경에 적용가능한 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Protecta Luminaire

Surface Mounted Fluorscent

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

 

(2) Chalmit Protecta Emergency Luminaire

Surface Mounted Fluorescent

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions.

As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

The Protecta Emergency comes complete with integral three hour Ni-Cd battery backup. The incoming mains supply to the luminaire has the facility for two live supplies: continuous live (Lc) which supplies constant power to the battery and switched live (Ls) which is for external switching, allowing the luminaire to be locally switched off without the emergency battery pack unintentionally operating the lamps.

If external switching is not required Lc and Ls are made common at the mains terminal block.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available.

 

 

 

 

 

(3) Chalmit Protecta Stainless Steel Luminaire

Surface Mounted Fluorescent

The Protecta industrial fluorescent is available with a stainless steel body. Protecta has excellent durability as it is constructed using high grade 316S31 stainless steel and a polycarbonate diffuser. A standard non-emergency and emergency versions are available in both 18W and 36W lamp options.

The product is intended for industrial applications where chemical agents are present which could attack GRP bodied luminaires. The stainless steel enclosure affords a high degree of ingress protection(IP66/67). Its design also utilised the Protecta's key features providing ease of access to lamps and control gear. This ensures that installation and maintenance will be completed quickly and efficiently.

The Emergency version is also available complete with 3 hour Ni-Cad battery back-up.

 

 

 

 

 

(4) Chalmit Acclaim  Luminaire

Recessible Fluorescent

The Acclaim recessible lighting range is suitable for a range of industry standard ceiling types. Available as both emergency and non-emergency versions, the Acclaim can be used with 18W or 36W fluorescent lamps. The Acclaim has an IP ratnig of IP54 and is also certified to for use in fire resistant ceilings up to solas B15 rating.

 

The polycarbonate diffuser is avaiable in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light output and duration in accordance with emergency lighting standards.

ATEX Category 2 (Zone 1) hazardous area versions are available.

 

 

 

 

 

(5) Chalmit Sterling II Luminaire

Surface Mounted Fluorescent

The Sterling II is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a 230/240V 50Hz copper and iron ballast as standard, available in 18W, 36W and 58W fluorescent lamp options. Other supply voltage options are available.

Emergency models have an internal Ni-Cad battery.
Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with high frequency electronic ballast; please refer to the Sterling II HF product page for details.

 

 

 

 

 

(6) Chalmit Sterling II High Frequency Luminaire

Surface Mounted Fluorescent

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a GRP body and polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.

 

 

 

 

 

(7) Chalmit Sterling II Stainless Steel Luminaire

Surface Mounted Fluorescent

The Sterling II luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas. It is available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II has a copper & iron switchstart ballast, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Highfrequency ballast (HF), please refer to the appropriate product page for details.

 

 

 

 

 

(8) Chalmit Curie Luminaire

Recessible Fluorescent

The Curie range of fluorescents is available in normal and emergency versions is designed purposely for use industrial applications where  recessible emergency lighting is required. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with the textured side facing downwards. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light output and duration in accordance with emergency lighting standards and comprehensice battery management & automatic self-testing is available as an option.

 

 

 

 

(9) Chalmit Sterling II HF Stainless Steel

Surface Mounted Fluorescent

The Sterling II High frequency luminaire is designed to provide a high quality, cost effective fluorescent luminaire for industrial areas, available in single and twin body versions. The construction features a marine grade 316S31 stainless steel body and transparent polycarbonate diffuser. These are secured using quick release stainless steel clips allowing easy access for rapid installation and maintenance.

The Sterling II H/F has a high frequency electronic control gear, available in 18W, 36W and 58W fluorescent lamp options.
 
Emergency models have an internal Ni-Cad battery. Please note that single lamp emergency versions are only supplied in a twin lamp body.

A version of the Sterling II is also available with a Copper & Iron ballast, please refer to the appropriate product page for details.

 

 

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Zone 2 Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 방폭위험지역 Zone 2에 적용가능한 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Sterling II Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II s a quality and cost effective luminaire designed to provide instant glare free white light for Zone 2 hazardous areas.

The GRP body and polycarbonate diffuser is secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance. The protection is Ex n with IP65 sealing.

The Sterling II is designed as a single product for both Gas & Dust atmospheres and is certified under the ATEX 94-9-EC directive for Categories 3 G and 3 D. The range is also IECEx compliant.

The Sterling is suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

 

 

 

 

 

(2) Chalmit Sterling II Emergency Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II emergency fluorecent luminaire designed for Zone 2 areas with a 3 hour emergency duration. The GRP body and polycarbonate diffuser are secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance.

The Sterling II is designed as a single product for both Gas & Dust atmospheres. It is certified with Ex n protection under the ATEX 94-9-EC directive for Categories 3 G and 3 D and has IP65 sealing. The range is also IECEx compliant.

The Sterling suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

 

 

 

 

 

(3) Chalmit Sterling II Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II stainless is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear and high frequency ballast.

 

 

 

 

 

(4) Chalmit Sterling II Emergency Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II stainless emergency is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage. The emergency version provides safety critical lighitng for three hours in the event of a mains power failure.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear.

 

 

 

 

 

(5) Chalmit Protecta II Luminaire

Ex n Fluorescent / ATEX Category 3

The Protecta Category 3 Ex n luminaire combines the strength and integrity of the Category 2 increased safety enclosure with the Category 3 lamp and control gear package used in the Sterling. The range is suitable for T8 tubular fluorescent lamps in the nominal 18W and 36W sizes.

Protecta is constructed using glass reinforced polyester (GRP) and polycarbonate which resist saline and other corrosive environments. A key feature is the Protecta's rugged duribility. This comes from strength of the enclosure combined with toughened mounting points together and the very high degree of ingress protection.
 
The Zone 2 luminaire certified Ex n with IP66/67 sealing for ignitable gas and dust applications. The ATEX Categories are 3 G and 3 D.

The simple design and ease of access to lamps and control gear means that installation and maintenance can be completed quickly and efficiently. The Protecta offers the facility of four cable entries. The standard range has electronic control gear and all
emergency versions come  complete with 3 hour battery duration.

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Zone 1 Fluorescent  제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 방폭위험지역 Zone 1 에 적용가능한  Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Protecta III Luminaire

Ex e Fluorescent / ATEX Category 2

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas The rugged Protecta combines high quality and low maintance. It is constructed of a glass reinforced polyester (GRP) body and a polycarbonate diffuser to resist highly saline and other harsh, corrosive environments.

Major features of the luminaire are the strength of the enclosure and mounting points together wih the very high degree of ingress protection afforded by the simple reliable construction.
 
All the control gear is mounted on a gear tray. This ease of access to lamps and control gear ensures that installation and maintenance will be completed quickly and efficiently.

 

 

 

(2) Chalmit Protecta III Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

The Protecta III Ex e emergency luminaire is a technologically advanced and high quality fluorescent suitable for use in Zone 1 and Zone 21 hazardous areas. The luminaire incorporates comprehensive self testing features to ensure lamp, battery and supply integrity. The Protecta construction has a glass reinforced polyester (GRP) body and polycarbonate diffuser, this makes it highly resistant to saline and corrosive environments, ideal for use on an Offshore Platform or FPSO.

The Protecta fluorescent is available as both maintained and non-maintained versions. During emergency operation light output can be up to 50% of one lamp with 90 minute duration as standard.

Other key features of the luminaire include extreme durabilty due to the rugged enclosure design and toughened mounting points together combined with very high ingress protection. The Protecta's simple construction ensures ease of access to lamps and control gear making installation and maintenance both quick and efficient.

 

 

 

(3) Chalmit Protecta III Stainless Steel Emergency

Ex e Fluorescent / ATEX Category 2

The hazardous area Ex e Protecta III fluorescent is also available in a stainless steel body version. This product shares the technical features of the GRP bodied range but provides increased mechanical protection for the toughest of environmental conditions.

The durability of the stainless steel Protecta is ensured due to its construction from high grade stainless steel and a polycarbonate diffuser. The product is intended for applications where a risk of mechanical damage or exposure to chemical agents exist.

The enclosure also affords the high degree of ingress protection(IP66) required for use in Zone 1 and Zone 21 hazardous areas. The design  provides ease of access to lamps and control gear ensuring that installation and maintenance will be completed quickly and efficiently.

 

 

 

(4) Chalmit Lomond Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

The Lomond Ex d fluorescent is a traditional flameproof luminaire for use with linear and compact fluorescent lamps. It is suitable for Zone 1 and Zone 21 hazardous areas.

The Lomond is designed for applications are where white instant light is needed. The aluminium and glass construction is suitable for aggressive chemical environments such as paint spraying, which could otherwise attack plastics.

An emergency version with the 8W lamp is particularly suitable for over door lighting. This is designed for maintained operation as standard, a non-maintained emergency option is also available.

The design features a single flameproof path giving easy access for wiring, lamp replacement and to the control gear. The cable entry is the simple direct type using flameproof Ex d cable glands.

 

 

(5) Chalmit Acclaim Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

The Acclaim range fluorescent luminaires is certified for use in Zone 1 and Zone 21 hazardous areas. It is designed for use in offshore accommodation areas and control rooms where it provides recessible emergency and escape lighting.

Manufactured from zinc coated sheet steel the luminaire is suitable for installation in fire resistant ceilings up to solas B15 rating. The polycarbonate diffuser is available in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed into a variety of ceiling types..

The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light output and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration.

 

 

 

Please note: The Acclaim III is supplied with a high frequency self-test ballast. If using the Acclaim for sleeping quarters, please select the non-self test option (Suffix to Cat No. /NST).

 

(6) Chalmit Curie Elite Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

available in normal and emergency versions. It is designed for use in Oil & Gas and Marine environments where it provides working, recessible emergency and escape lighting. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with textured side facing down. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light output and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration.

 

Please note: The Curie Elite is supplied with a high frequency self-test ballast. If using the Curie for sleeping quarters, please select the non-self test option (Suffix to Cat No: /NST).


 

 

 

 Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋 Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

 

 

1. Zone 1

(1) Chalmit Protecta III Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(2) Chalmit Protecta III Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(3) Chalmit Protecta III Stainless Steel Emergency

Ex e Fluorescent / ATEX Category 2

 

 

 

(4) Chalmit Lomond Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(5) Chalmit Acclaim Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(6) Chalmit Curie Elite Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

2. Zone 2

(1) Chalmit Sterling II Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(2) Chalmit Sterling II Emergency Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(3) Chalmit Sterling II Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(4) Chalmit Sterling II Emergency Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(5) Chalmit Protecta II Luminaire

Ex n Fluorescent / ATEX Category 3

 

3. Industrial

(1) Chalmit Protecta Luminaire

Surface Mounted Fluorscent

 

 

 

(2) Chalmit Protecta Emergency Luminaire

Surface Mounted Fluorescent

 

 

 

(3) Chalmit Protecta Stainless Steel Luminaire

Surface Mounted Fluorescent

 

 

 

(4) Chalmit Acclaim  Luminaire

Recessible Fluorescent

 

 

 

(5) Chalmit Sterling II Luminaire

Surface Mounted Fluorescent

 

 

 

(6) Chalmit Sterling II High Frequency Luminaire

Surface Mounted Fluorescent

 

 

 

(7) Chalmit Sterling II Stainless Steel Luminaire

Surface Mounted Fluorescent

 

 

 

(8) Chalmit Curie Luminaire

Recessible Fluorescent

 

 

(9) Chalmit Sterling II HF Stainless Steel

Surface Mounted Fluorescent

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Solas LED Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 일반산업형 조명군 가운데 Chalmit Solas LED Floodlight 제품에 대하여 살펴보겠습니다.

Chalmit Lighting

Solas LED Floodlight

Emergency LED Floodlight

 

 

 

The Chalmit Solas is a new generation of LED lighting ideal for installations where area lighting is required but traditional re-lamping can be difficult.

The product uses ultra bright white LEDs to provide the illumination required for task and working areas. Output is equivalent with a 70W HPS lamp.  

 

 

 

The luminaires rugged construction of cast aluminium and toughened flat glass is suitable for the most environmentally challenging areas, offshore and marine environments.

Solas is available as an emergency version which is operable in either maintained mode or non-maintained mode. This gives the flexibility of using the luminaire for both normal lighting and in emergency situations. A remote inhibition facility is also available.

 

 

 

 

The LEDs operate at 100% lumen output when the power fails for a duration of 90 minutes. Battery recharge time is 24 hours. They also provide instant on lighting from both mains or battery mode.

 

 

 

 

CAT REF.

SOLD/O34/LE

SOLD/034/LE/EM

SOLD/034/LE/EM/NM

S2610-0001

S2610-0005

 

 

Technical Data

Solas Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 487 EPDM Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 일반산업형 조명군 가운데 Chalmit 487 EPDM Floodling 사양에 대해 살펴보도록 하겠습니다.

 

 

Chalmit Lighting

487 EPDM Floodlight

Industrial Application

  

 

 

The Chalmit 487 compact, robust and weatherproof EPDM floodlight is versitile in its mounting suitability as this is available in a base-mounted version (/B) and pole-mounted option (/P). The range has excellent vibration resistance making it ideal for use in hostile marine environments.

 

 

Manufactured from EPDM rubber, the Chalmit 487 has a toughened front glass and wire guard for maximum protection. Ingress Protection of IP54 (with wire guard) and IP67 version available (silicone sealing ring fitted to glass. No guard fitted) with the suffix of /IP67 to the partcode.

 

 

 

 

The Chalmit 487 is suitable for GLS lamps up to 200W wtih a recommended maximum continuous operating ambient temperature of +30°C and a minimum temperature of -40°C.

 

 

CAT REF.

487I/200/GL


 

Technical Data

487 Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 458 EPDM Floodlight 기술사양

 

안녕하세요 TIATIP입니다. 오늘 이 시간에는 샬밋 일반조명제품군 가운데 Chalmit 458 EPDM Floodling 에 대해 살펴보도록 하겠습니다.

 

 

Chalmit Lighting

458 EPDM Floodlight

Industrial Application

 

 

 

The Chalmit 458 is high wattage, weatherproof, robust EPDM floodlight is versitile in its mounting suitability as this is available in a base-mounted version (/B) and pole-mounted option (/P). The range has excellent vibration resistance making it ideal for use in hostile marine environments.

 

 

The Chalmit 458 is manufactured from EPDM rubber with a heavy duty borosilicate front glass and wire guard for maximum protection. The Chalmit 458 is suitable for GLS and hps lamps with maximum continuous operating temperature of +30°C.

Models with GLS lamps can operate at an ambient temperature as low as -40°C. A universal control gear box is required for models with hps lamps.
 
Available in 150W HPS, 250W HPS and 300W GLS lamp options.

 

 

 

CAT REF.

458I/150/HS

458I/250/HS

458I/300/GL

 

Technical Data

458 Industrial.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 800 Series Floodlight 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 일반산업형 Floodlight 가운데, Chalmit 800 Series Floodlight 에 대해 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

800 Series Floodlight

Stainless Steel Luminaire

Industrial Application

 

 

The 800 Series is an asymmetric floodlight range specifically designed for corrosive atmospheres. Constructed from marine grade stainless steel, the range is fitted with internal control gear and can be quickly relamped by removing the toughened glass front cover via the specially designed front cover clamps 

 

 

There is the option of a remote gear box for all HPS and metal halide lamp models although for certain models this is standard. Other options include M25 cable entries, auxillary tungsten halogen lamps, looping, narrow beam reflector and timed cut-out ignitor.

 

 

For high vibration applications there is the option of a strengthened mounting arrangement for added safety.

 

ATEX Category 3 (Zone 2) hazardous area versions are available.


 

 

 

CAT REF.

844I/070/MS

S8444-0001

S8444-0002

S8444-0005

854I/100/HS

854I/150/MS

854I/250/MS

854I/400/MS

854I/500/TH

S2400-0002

S8544-0002

S8544-0004

S8544-0007

864I/150/HS/120

864I/250/HS/120

864I/250/MS

864I/250/MS/120

864I/400/HS/120

864I/400/MS

864I/600/HS

S2400-0002

S8644-0002

S8644-0004

S8644-0008

 

 

Technical Data

800Series Industrial.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 비방폭 일반산업형 Bulkhead 라인업 소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 조명가운데 비방폭 일반산업형의  Chalmit Bulkhead 라인업에 대해 살펴보도록 하겠습니다.

 

1. Chalmit Lighting Nexxus Heavy Duty Bulkhead

Industrial Type

 

 

The industrial version of the Nexxus bulkhead luminaire is suitable for HID incandescent and compact fluorescent lamps. Its construction consists of a black-painted marine grade die cast aluminium LM6 alloy body with a heat resistant prismatic glass cover, silicone rubber sealing gasket and stainless steel fixings.

The Nexxus bulkhead offers a compact and versatile solution in many applications especially those with high levels of dirt and /or moisture.

They are simple to install, easy to maintain and durable.  The wide range of light sources and wiring options also makes the Nexxus a very versitile luminaire for many industrial applications.

ATEX Category 3 (Zone 2) hazardous area versions are available.

 

 

 

 

2. Chalmit Lighting Nexled LED Bulkhead

Industrial Type

The NexLED bulkhead luminaire utilises high output 1 Watt light emitting diodes (LED's) that provide a white, instant light that is highly visible.

 

Bulkheads offer a compact and versatile solution for many applications, especially in exposed conditions with high levels of dust and moisture.

 

 The enclosure is corrosion resistant marine grade aluminium with a toughened glass cover, silicone rubber sealing gasket and stainless steel fixings. The product can be fitted with either two or eight low power LED's making the NexLED an efficient luminaire for both mains and emergency mode operation from the backup battery. The use of LED technology means that light output in emergency mode is identical to mains operation, lamps switch off for one second when the mains fail then restart to indicate battery operation.

 
The bulkhead is simple to install, easy to maintain and durable. The LED's are more efficient than incandescent and most tungsten halogen lights and operate for up to 80000 hours eliminating relamping in many applications. This new lamp technology emits no heat forward, no ultra violet light, is mercury free and is not susceptible to vibration. Suitable for a wide range of ambient temperatures from -45°C to +55°C with light output unaffected by low temperatures. Where emergency lighting is required in ambient temperatures below -5°C the NexLED is available with a heated battery compartment which maintains the batteries at the required temperature to sustain emergency duration.

 

 

 

    

Technical Data (Datasheet)

Nexxus Heavy Duty Bulkhead Industrial.pdf

Nexled LED Bulkhead Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 방폭위험지역 Zone2에 적용되는 Bulkhead 라인업 소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명가운데 위험지역 Zone2에 적용가능한 Chalmit Bulkhead 라인업에 대해 살펴보고자 합니다.

 

  

 

 

1. Chalmit Lighting Nexxus Bulkhead

Ex n Luminaire

Zone 2 Application
ATEX CATEGORY 3

 

 

 


The Nexxus bulkhead luminaire is suitable for a wide range of discharge lamps, incandescent lamps and also compact fluorescent lamps.

The explosion protection is Ex nR utilising a restricted breathing enclosure. Bulkheads offer a compact and versatile solution in many applications especially those where conditions are exposed and have high levels of dirt and moisture. The enclosure is corrosion resistant aluminium with a heat resistant glass cover, silicone rubber sealing gasket and stainless steel fixings.

The bulkhead is simple to install, easy to maintain and durable. The wide range of light sources and wiring options makes the Nexxus a very versatile luminaire. Suitable for a wide range of ambient temperatures, -45°C to +55°C, dependant on lamp type and wattage.

New reflector system giving 20% increase in photometric performance.

 

 

 

 

 

2. Chalmit Lighting Nexxus II LED Bulkhead

Ex nR tb Luminaire

Zone 2
ATEX CATEGORY 3

 

 

The Nexxus II bulkhead luminaire is suitable for Zone 2 applications incorporating an array of light emitting diodes(LEDs) providing an instant white light that is highly visible.

The explosion protection is Ex nR tb utilising a restricted breathing enclosure. Bulkheads offer a compact and versatile solution in many applications especially those where conditions are exposed and have high levels of dirt and moisture. The enclosure is corrosion resistant aluminium with a heat resistant glass cover, silicone rubber sealing gasket and stainless steel fixings.

The bulkhead is a very low power consumption reulting in ultra long lifespan where relamping is not required. The Nexxus a very versatile luminaire that is easy to install with a high corrosion resistance, suitable for a wide range of ambient temperatures, -45°C to +55°C.

New reflector system giving 20% increase in photometric performance.

 

 

 

  

  

Technical Data (Datasheet)

Nexxus Bulkhead Hazardous.pdf

Nexxus II LED Bulkhead Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (949)
TIA (92)
TIP (194)
TIEx (593)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)