Chalmit 샬밋 Zone2 Wellglass 라인업 소개

 

 안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명 가운데 위험지역 Zone2에 적용되는 Wellgalss 제품군에 대해 살펴보도록 하겠습니다.

 

 

 

1. Chalmit Lighting Eclipse II Well-Glass

Ex n Luminaire / ATEX Category 3

 

The Eclipse II is a Zone 2 well-glass for high pressure discharge lamps of up to 400W.

It has a lightweight corrosion resistant aluminium body, heat resistant glass and stainless steel fasteners. It has been tested to IP66 and is suitable for use in harsh environments. The protection is Ex nA nR, incorporating a restricted breathing lamp chamber and a non-sparking control gear and terminal housing. This design removes the need for special cable or cable glands. The lamp glass has a screwed thread for quick access.

 

The control gear housing hinges on the mounting and termination cover and is held in position by a single screw barrel nut. The single screw barrel nut permits easy access and closure of the luminaire during installation and should maintenance be required. There is a range of wall, surface and stanchion mountings which may be integrated in the design. An enclosed reflector for highbay applications is also available. A range of external reflectors is available to direct light efficiently to where it is required, please refer to the product datasheet for further details.

 

 

2. Chalmit Lighting Eclipse Junior Well-Glass

Ex n Luminaire / ATEX Category 3

 

The Eclipse Junior is a Zone 2 well-glass luminaire suitable for high pressure discharge lamps up to 70W and GLS lamps up to 150W.

It has a lightweight corrosion resistant aluminium body, heat resistant glass cover with stainless steel fasteners. The Eclipse Junior is tested to IP66 and is suitable for use in harsh and hazardous environments.

The protection method is Ex nAR incorporating a restricted breathing lamp chamber and an unrestricted control gear and terminal housing. This removes the need for special cable or glands. The lamp-glass has a screwed thread for quick access. The main enclosure containing the control gear hinges on the mounting part but is not fastened to it. This allows ready access to the terminals and the easy removal of the control gear and lamp enclosure if maintenance is needed.

There is a range of wall, surface and stanchion mountings integrated into the designs, please refer to the datasheet for further details. This small well-glass offers a compact lighting solution for use where all round lighting is needed in positions having limited space and access. 

 

 

 

 

Technical Data (Datasheet)

Eclipse II Hazardous.pdf

Eclipse Junior Hazardous.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Zone1 Wellglass 라인업 소개

 

 안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명 가운데 위험지역 Zone1에 적용가능한 Wellgalss 제품군에 대해 살펴보도록 하겠습니다.

 

 

 

 

1. Chalmit Lighting 216 Well-Glass

Ex d e Luminaire / ATEX Category 2

The 216 well-glass luminaire is ideal for use where a compact, robust and efficient source of localised lighting is needed. Designed for use in Zone 1 and 21 hazardous areas, the range accommodates high pressure discharge lamps up to 80W Mercury Vapour, 70W HPS, incandescent lamps up to 200W and compact fluorescent lamps up to 26W.

The 216 is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings and has an IP66/67 rating.

The luminaire features a large side mounted increased safety terminal chamber eliminating the need for flame-proof cable glands and allowing flush mounting. 

 

 

2. Chalmit Lighting 238 Well-Glass

Ex d e Luminaire / ATEC Category 2

 

 

The 238 well-glass luminaire is ideal for use where a compact and powerful source of area lighting is needed. The hazardous area range accommodates high pressure discharge lamps up to 250W and incandescent GLS lamps up to 300W.
 
External reflectors are available to provide light control for efficient low and medium height operation.

The luminaire is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings. It has an IP66/67 rating.

The luminaire features a large side mounted increased safety terminal chamber eliminating the need for flame-proof cable glands and allowing flush mounting. The 238 is suitable for a wide range of high and low temperature applications. 

 

 

 

3. Chalmit Lighting 261 Well-Glass

Ex d Luminaire / ATEX Category 2

 

The 261 well-glass is a high light out luminaire ideally suitable for demanding and hazardous environments. It accommodates high pressure discharge lamps up to 400W and also incandescent lamps up to 500W.
 
External reflectors are available making the 261 suitable for medium and high bay applications.

The luminaire is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings and has an IP66/67 rating. It features a large side mounted increased safety terminal chamber eliminating the need for flameproof cable glands and allowing for flush mounting.

Versions of the 261 are available for low temperature operation at -40ºC on certain lamp ranges. 
 

 

 

 

 

Technical Data (Datasheet)

216 Hazardous.pdf

238 Hazardous.pdf

261 Hazardous.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Industrial Eclipse Junior Well-Glass 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 비방폭형(일반산업형) 조명가운데 Chalmit Eclipse Junior Well-Glass 제품을 살펴보도록 하겠습니다.

 

 

 

Chalmit Lighting

Well-Glass

Industrial Type

Eclipse Junior Well-Glass

Highbay Luminaire

 

 

 

The Eclipse Junior is a robust, corrosion resistant wellglass/highbay luminaire suitable for discharge lamps up to 80W and GLS lamps up to 150W which offer a compact lighting solution where all round lighting is needed in positions having limited space and access.

 

The luminaire has a lightweight die cast aluminium alloy hinged body and lid with a lamp glass which is unscrewed for quick access. The main enclosure containing the control gear hinges on the mounting part of the Eclipse Junior but is not fastened to it, allowing ready access to the terminals and easy removal of the control gear and lamp enclosure when maintenance is required.
 

 

 

Direct ceiling-mounted is standard but stanchion-mounted and wall-mounted versions are available. The Eclipse Junior is ideally suited for use in harsh industrial environments.

ATEX Category 3 ( Zone 2) hazardous area version is available.

 

 

CAT Ref.

ECJI/050/HS

ECJI/070/MS

ECJI/080/MV

ECJI/125/MV

ECJI/150/GL

E0850-0048

SECL0-0001

SECL0-0002

 

Technical Data (Datasheet)

Eclipse Junior Industrial.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Industrial Eclipse II Well-Glass 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 비방폭형(일반산업형) 조명가운데 Chalmit Eclipse II Well-Glass 사양에 대해 살펴보도록 하겠습니다.

Chalmit Lighting

Well-Glass

Industrial Type

Eclipse II Well-Glass

Highbay Luminaire

 

 

 

The Eclipse II is a robust wellglass/highbay luminaire suitable for high pressure discharge lamps of up to 400W.

 

It has a lightweight corrosion resistant cast aluminium body and heat resistant glass construction complete with stainless steel fasteners. It has been tested to IP65 and is suitable for use in harsh industrial environments. 
 

 

 

The lamp glass has a screwed thread for quick access. The control gear housing hinges on the mounting and termination cover and is held in position by a single screw barrel nut. The single screw barrel nut permits easy access and closure of the luminaire during installation,should maintenance be required.

 

These is a range of wall, surface and stanchion mountings which may be integrated into the design. An enclosed reflector for highbay applications is also available. A range of external reflectors is available to direct ight efficiently to where it is required.

A Zone 2 hazardous area version is available.

 

 

 

 

CAT Ref.

EC2I/050/HS

EC2I/070/MS

EC2I/080/MV

EC2I/100/

 

 

Technical Data (Datasheet)

Eclipse II Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 261 Well-Glass 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 샬밋 방폭조명가운데 방폭위험지역 Zone1에 사용되는 Chalmit 261 Wellglass 제품사양에 대해 살펴보도록 하겠습니다.

 

 

 

 

Chalmit Lighting

샬밋

261 Well-Glass

Explosionproof 방폭 
Ex d Luminaire
ATEX CATEGORY 2

 

 

 


The 261 well-glass is a high light output luminaire ideally suitable for demanding and hazardous environments. It accommodates high pressure discharge lamps up to 400W and also incandescent lamps up to 500W.
 
External reflectors are available making the 261 suitable for medium and high bay applications.

 

 

 

The luminaire is made from corrosion resistant aluminium alloy and toughened boro-silicate glass using stainless steel fastenings and has an IP66/67 rating. It features a large side mounted increased safety terminal chamber eliminating the need for flameproof cable glands and allowing for flush mounting.

Versions of the 261 are available for low temperature operation at -40ºC on certain lamp ranges.

 

ATEX Certified

GOST R Approved

 

 

 

 

CAT REF.

216D/050/HS

216D/070/HS

216D/080/MV

216D/100/GL

216D/113/CF

216D/118/CF

216D/126/CF

216D/200/GL

216D/213/CF

216D/218/CF

S2160-0002

S2160-0004

S2160-0007

S2160-0010

 

 

Technical Data(Datasheet)

261.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (947)
TIA (92)
TIP (194)
TIEx (591)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)