Hawke 호크 Enclosure PL-Range GRP Series, PL612 Type Juction Box

Hawke 호크 Enclosure PL-Range GRP Series, PL612 Type Junction Box

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크 GRP 박스로 대표되는 PL Range 가운데 막내 PL612 타입에 대해 살펴보겠습니다.

Hawke 호크 PL612 GRP Juction Box 

 

Enclosure Type : PL612

Glass Reinforced Polyester

Exe Enclosures for Harsh and Hazardous Locations

The Dual ATEX/IECEx Approved PL612 Enclosure

 

 

 

Hawke 호크 PL612 GRP Juction Box 

 

 

Technical Data

Increased Safety II 2 GD Exe IIC Gb, Extb IIIC Db.

PL612 Certificates:
Baseefa Certificate No. Baseefa06ATEX0117X.
IECEx Certificate No. IECEx BAS 06.0028X.

ZPL612 Certificates:
Baseefa Certificate No. Baseefa06ATEX0116U.
IECEx Certificate No. IECEx BAS 06.0027U.

Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.

Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7,

IEC/EN 60079-31.

Ingress Protection: IP66 and IP67 to IEC/EN 60529.

Deluge protection to DTS01.

Operating Temperature Range: -60°C to +75°C.

Temperature Class and Ambient: T6 40°C,

optional T5 with ambients up to 65°C.

 

 

 

 

• PL612 Assembly Instructions
• ZPL612 Assembly Instructions
• Enclosure Data Sheet
• Enclosure full technical specification
• Enclosure wattage factor
• Enclosure combined terminal resistance
• Maximum physical quantity of terminals

 

 

 

Hawke 호크 PL612 GRP Juction Box 

 

Please Note :

Hawke still offer enclosures to customer specifications available from our Box Modifiers.

 

Terminals listed are only suitable for a minimum operating temperature of -50°C.

 

 

Hawke 호크 PL612 GRP Juction Box 

 

 

Materials And Finishes

Glass Reinforced Polyester. Natural Black Finish.
Flame Retardant to IEC 92.1 Clause 2.38

 

Hawke 호크 PL612 GRP Juction Box 

 

 

General Information

Standard PL612 Enclosures are supplied complete with:
Steel Earth Continuity Plate.
1 x M20 offset tapped entry per face (entries not plugged).

 

 

 

 

 

General Information

 

1. The Ultimate in Robust GRP Construction
Designed to withstand impact resistance up to 20Nm for PL6 series (7Nm for PL7 series). GRP construction provides a high degree of resistance to corrosive atmospheres.

2. Anti-Static Properties Removes the risk of ignition sources through static
induced sparking resistivity. Insulation resistance less than 1GΩ.

3. External Mounting Feet Eliminates the need to remove the lid when
mounting the enclosure on the wall.

4. Earth Continuity Plate Optional.

5. Stainless Steel Rating Label Highly durable and corrosion resistant.

6. Corrosion Resistant Stainless Steel Lid
Fixing Screws with Nylon Retaining Washers Prevents loss of screws during assembly and maintenance.

7. One Piece Durable Captive Moulded Silicone Gasket
DTS01 deluge protection. Provides Ingress Protection to IP66 and IP67.
Optimum performance at low and high temperature extremes.

 

 

Hawke Junction Boxes - PL  Range GRP Series

 

 

 

 

Hawke Enclosure Catalogue HWK05 March 02.zip

Hawke Full catalogues_20101103.zip

 

 

 

 

 

 

국내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com