KILLARK EXB-Lite EXBLT Series 2018 신제품 론칭안내

 

안녕하세요 TIATIP 에디터입니다. 이번에 킬락 KILLARK 의 대표적인 방폭박스이자 국내 고객들에게도 친숙한 EXB 시리즈의 성원에 힘입어, 이번에 높은 작업현장 및 공간에서 유용한 가볍고 경제적인 EXB Lite 버전이 출시되었습니다. 오늘 이시간에는 유럽지역과 아시아에서 벌써부터 많은 관심과 반응을 보이고 있는 EXBLT Series 에 대해 관련 자료를 포스팅합니다.

 

 

Hubbell

KILLARK Enclosures for Harsh and Hazardous Environments

EXB LITE, EXBLT Series

 


Bolted enclosures for use in areas that are hazardous due to the presence of flammable gases and vapors. Combustible dust, or easy ignitable fibers and flyings. Locations that are corrosive, wet, hose down, dust, dirty, for both hot and cold industrial applications.

 

• Pulp & Paper Mills
• Breweries
• Electrical Power Plants
• Refineries
• Petrochemical Plants
• Chemical Plants
• Wastewater Treatment
• Grain Facilities
• Marine, Docks, Ports
• Coal Handling
• Off Shore Platforms
• Pumping Stations
• Textile manufacturing
• Food Processing
• Used to link electrical wires. Provide access to conductors for maintenance and system expansions
• Primary circuits for distribution to field control devices.
• Enclosure to house control stations, meters, relays, motor starters circuit
breakers, terminal blocks and other electrical equipment.
• Enclosures are available blank for field modifications or with factory
modifications, options and accessories.

 

 


Features
• The EXBLTP series is up to 35% light than the EXB Series enclosures.
• Copper free cast / plate aluminum construction. High strength, lighter in
weight, highly corrosion resistant.
• Choice of two covers, flat aluminum plate cover, EXBLTP, or the original aluminum sand casts cover, EXBLTC.
• Fewer cover bolts – reduces installation and maintenance time. Offered in Plated Carbon Steel, 316SS and 316SS Tri-Lead for quicker access.
• Gasketed cover flange as standard. Nitrile (BUNA-N) “O” ring gasket is located inside the bolt circle to prevent water from seeping into the enclosure.
• Ductile mounting lugs. Lugs are made of a ductile aluminum alloy to adjust to irregular mounting surfaces without damaging the enclosure. EXBLTs 8x12x6x and larger supplied with bi-directional mounting pads. Lugs can installed either horizontal or vertical by the factory or in
the field. Easily replaced if damage does occur.
• Hinges supplied as standard on the 6x12x4, 6x12x6 8x12x6 and larger as a standard. Smaller sizes can be ordered with hinges by adding SU2 to the catalog number. Hinges can be mounted on any of the 4 sides.
• Enclosures can be drilled and tapped with conduit openings up to 2” NPT or M63 openings, factory or field.

• Covers both plate and cast can be drilled and tapped for G Series control
operators openings and EXH disconnect handles, factory or field. The original aluminum sand casts cover, EXBLTC, can be provided with the GLXR rectangular viewing windows and the GL round threaded viewing windows.
• Cover flanges supplied with recessed notches for prying the covers open
without damaging the ground flame path.
• The mounting pan bosses are pre-drilled for the factory or field installation of the optional back pans

 

 

 

 

Material/Finish
• Box: Molded from 356-T6 copper free aluminum, less than 4/10 of 1% copper alloy and less than 6% magnesium.
• Cover: EXBLTP plate cover is made of 6061-T6 aluminum alloy.
• Cover: EXBLTC cast from 310 copper free aluminum, less than 4/10 of 1% copper alloy and less than 6% magnesium.
• Bolts: Plated carbon steel.
• Hinges: Extruded aluminum with stainless steel pin and hardware.
• Optional: Mounting pans sheet aluminum 6061-T6 or 5052-H34.
• Optional: Viewing windows tempered soda lime glass.
• Finish: Enclosures supplied natural without paint.

 

 

Technical Data

Hubbell, Killark, EXB, EXBLITE, EXBLT, Junction Box, Enclosure, 허벨, 킬락, 방폭박스, 방폭주물박스, EXD박스, d박스, 킬락박스, UL방폭박스, ATEX방폭박스, IECEx방폭박스

EXBLT 20180118 DS IDK EN.pdf

Killark Enclosure EXB Series IDK 2015XXXX.pdf

5.Killark Enclosures IDK E.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.  

 

 

  

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

Posted by TIATIP TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP

카테고리

TI Story (978)
TIA (98)
TIP (194)
TIEx (614)
TIS (37)
TiNoTe (10)
TIO (23)
The OtherS (1)