Killark, Acceptor시리즈, Plugs, Receptacles, Adapter and Accessories, PR26
안녕하세요 TIATIP 입니다.
Universal Adapter Kit
ACCEPTOR® receptacles are available with an adapter kit for mounting to
Crouse-Hinds® EDS Series or Appleton® EFD Series back boxes.
ACCEPTOR receptacles properly installed with these adapter kits are
U.L. Listed for use in Class I, Div. 2, Groups B,C,D hazardous locations and
Zone II, Groups IIB + H2, IIA. Kit contains one ACCEPTOR® receptacle
plus adapter plate and mounting bolts.
XHL Series Hand Lamps
A handy accessory to the ACCEPTOR® Series, these hand lamps can be used
as an illumination source where flammable materials are present, such as
processed finish goods, storage vats, or handling areas.
XHLF Fluorescent
GFI Protected Receptacle
Utilizes FXS GFI and ACCEPTOR® receptacle to interrupt a circuit, when a
ground fault is detected on equipment which may be handled by personnel in hazardous locations.
Features
• Factory Sealed
• Test and Reset push buttons are provided on cover assembly, with
optional pilot light available Unit should be tested monthly
• Includes new GFCI to meet latest UL943 GFCI standards revisions
• Exterior gasket provides NEMA 3 weatherproof protection
• Ground boss for grounding in the splice box
• Color coded wiring and stainless steelcover bolts
• Receptacle used is UGRO-20231.
Electrical Rating
GFI units are rated at 20A, 120 VAC, 60Hz. Class A.
4-6 miliamp trip setting Trip Time-UL Curve
The GFCI protected ACCEPTOR® is the solution to OSHA's requirements for
GFCI protection when using portable equipment in hazardous and wet locations.
For use with 125V, or125/250V 15 or 20 amp receptacles without GFCI
protection, the Adapter Unit provides GFCI and circuit protection to connected
apparatus by simply being plugged into an existing receptacle.
The Hard-Wired Unit provides the same protection and is used directly
as a GFCI protected device. Units are feed-through with one close-up plug.
Adapter Unit
• No need to permanently alter existing installations; Portable Unit can be
temporarily hung using included strap near an existing receptacle wherever
protection is required
• Factory Sealed Unit
• Acceptor® plug and cord set included with Adapter Unit. Cord is 36"
Hard-Wired Unit
• provides GFCI and circuit protection in new installations, or as an upgrade or
replacement for non-GFCI receptacles
• Factory Sealed, except Group B
Adapter and Hard-Wired Unit
• GFCI device also provides circuit protection, for connected apparatus,
against current overload and short circuits
• Acceptor® receptacles and plugs are intermateable with both Crouse-Hinds® Ark-Gard®2 and Appleton® U-Line® products
• Amber pilot light provides indication that the receptacle is energized.
• Units can be Padlocked OFF for maintained safety
• Fully gasketed GFCI compartment prevents moisture from damaging
electronic components
• Same high quality materials as the standard ACCEPTOR®
Catalog Number
UGFI20AD
UGFI15AD
UGFI202AD
UGFI152AD
UGFI20C1
UGFI20C2
UGFI20C3
UGFI15C1
UGFI15C2
UGFI15C3
UGFI202C3
UGFI202C3
UGFI202C3
UGFI152C3
UGFI152C3
UGFI152C3
Killark Plug Receptacle PR.pdf
국내 기술지원 및 구매상담처
CUSTOMER SUCCESS IDK