Killark, 킬락, LED Technology for Harsh and Hazardous Environments, V & VSL Series
안녕하세요 TIATIP 입니다.
Killark, 킬락에서 새롭게 선보이는 Low Voltage Vapor Tight 타입의 조명제품군 V시리즈와 VSL시리즈를 소개합니다.
KILLARK® is pleased to announce LOW WATTAGE “Vapor Tight” LED labor
and energy saving luminaires. Sized to replace “utility” type incandescent or
CFL’s, the VSL Series provides exceptionally long life with numerous mounting options and the industry’s broadest COLOR globe offering for Hazardous Locations in both glass and polycarbonate. The VSL utilizes time-tested industrial grade components, and offers an upgrade path for existing installations in 1000’s of locations worldwide. Market demand for this clean white light is growing exponentially, and Killark’s VSL fits the bill for wet, corrosive and NEMA 4 locations that are classified as Class I Division 2; Class II Division 2.
Key Features and Benefits
• L70 60,500 hours life at up to 55°C (5+ years to 70% of initial output)
equals Minimal Maintenance.
• LM79-08 Certified Photometrics Tested (NIST Recognized Lab)
• LM80-08 Lumen Maintenance Measurement
• Solder-LESS LED Board Connections - Vibration Resistant
• Less than 13 Watts of Power for VSL1330, less than 16 Watts for VSL1630
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Crisp white light - 5000°K (CCT);70 CRI
• Wide variety of optics, including Glass Globes, (Standard, Tempered,
Color) plus polycarbonate (Clear and Color)
• Optional Mounting arrangements, including Pendant, Wall, Ceiling,
Stanchion and adapters
• Copper-Free Aluminum Construction with electrostatically applied
epoxy/polyester powder paint for corrosion resistance
• Traditional Industrial Appearance, Superior Performance
V SERIES LED
Introduction
Killark ‘VSL’ Series LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4
areas where wind, water, snow or high ambients can be expected. VSL’s are sized to replace “Utility” type fixtures (incandescent or CFL’s) in
hallways, closets, elevator pits, docks, stairwells, access tunnels, and mechanical rooms. These fixtures can be used in locations made hazardous
by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and
certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, and garage areas.
LED Luminaire Features and Standards
• Compact in Size with Traditional Industrial Appearance and Suitability
• Wide variety of optics including glass globes (clear and tempered, color) plus polycarbonate globes in clear and colors
• Optional Mounting arrangements including Pendant, Wall, Ceiling, Stanchion and Adapters
• Fixtures available unit packed, order option CP
• VSL LED Housings can be retrofitted to existing V Series splice boxes; upgrade from CFL or incandescent
• Energy Savings - less than 13 Watts of Power; less than 16 Watts for VSL1630. Replaces 75W or higher incandescent
• Long Life - 60,500+ maintenance-free hours to 70% initial lumens
• Crisp White Light for Excellent Color Rendering - Chromaticity 5000°K (CCT); 70 CRI
• Integral driver - maintains fixture’s compact profile to fit in existing spaces
• Ambient suitability -40°C to 55°C
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections – Vibration Resistant
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
• TM-21* method to project long term lumen maintenance
• L70 Values - Industry Nomenclature for Hours of use to 70% of Initial Lumens
Compliances
• UL-8750 for LED lighting
• UL 1598 standard for luminaires
• UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Division 2; Class III, Division 2
• CSA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4
Materials
• Body, splice box and guards are corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection
• Reflectors - Polypropylene for pendant or ceiling applications
• Heavy-duty silicone gasketing for NEMA 4 requirements
* LM-xx & TM-21 are Illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to www.ies.org
①When mounted (globe down) to V series boxes; not Class II, iv. 2 or NEMA 4 on VBA, VFPS, VB or VFL adaptors to sheet etal boxes.
②Glass globe models to 55°C; Polycarbonate suitable to 40°C.
Killark Catalog Number
VSL1330A1SG, VSL1330A1HG, VSL1330A1PN, VSL1330A2SG, VSL1330A2HG, VSL1330A2PN, VSL1630A1SG, VSL1630A1HG, VSL1630A1PN, VSL1630A2SG, VSL1630A2HG, VSL1630A2PN, VSL1330F1SG, VSL1330F1HG, VSL1330F1PN, VSL1330F2SG, VSL1330F2HG, VSL1330F2PN, VSL1630F1SG, VSL1630F1HG, VSL1630F1PN, VSL1630F2SG, VSL1630F2HG, VSL1630F2PN,
VSL1330X1SG, VSL1330X1HG, VSL1330X1PN, VSL1330X2SG, VSL1330X2HG, VSL1330X2PN, VSL1630X1SG, VSL1630X1HG, VSL1630X1PN, VSL1630X2SG, VSL1630X2HG, VSL1630X2PN,
VSL1330C1SG, VSL1330C1HG, VSL1330C1PN, VSL1330C2SG, VSL1330C2HG, VSL1330C2PN, VSL1630C1SG, VSL1630C1HG, VSL1630C1PN, VSL1630C2SG, VSL1630C2HG, VSL1630C2PN,
VSL1330H1SG, VSL1330H1HG, VSL1330H1PN, VSL1330H2SG, VSL1330H2HG, VSL1330H2PN, VSL1630H1SG, VSL1630H1HG, VSL1630H1PN, VSL1630H2SG, VSL1630H2HG, VSL1630H2PN,
VSL1330D1SG, VSL1330D1HG, VSL1330D1PN, VSL1330D2SG, VSL1330D2HG, VSL1330D2PN, VSL1630D1SG, VSL1630D1HG, VSL1630D1PN, VSL1630D2SG, VSL1630D2HG, VSL1630D2PN,
VSL1330RASG, VSL1330RAHG, VSL1330RAPN, VSL1630RASG, VSL1630RAHG, VSL1630RAPN, VSL1330SASG, VSL1330SAHG, VSL1330SAPN, VSL1630SASG, VSL1630SAHG, VSL1630SAPN,
VSL1330W1SG, VSL1330W1HG, VSL1330W1PN, VSL1330W2SG, VSL1330W1HG, VSL1330W2PN, VSL1630W1SG, VSL1630W1HG, VSL1630W1PN, VSL1630W2SG, VSL1630W2HG, VSL1630W2PN,
VSL1330V1SG, VSL1330V1HG, VSL1330V1PN, VSL1330V2SG, VSL1330V1HG, VSL1330V2PN, VSL1630V1SG, VSL1630V1HG, VSL1630V1PN, VSL1630V2SG, VSL1630V2HG, VSL1630V2PN,
VSL1330FLSG, VSL1330FLHG, VSL1330FLPN, VSL1630FLSG, VSL1630FLHG, VSL1630FLPN, VSL1330D4SG, VSL1330D4HG, VSL1330D4PN, VSL1630D4SG, VSL1630D4HG, VSL1630D4PN, VSL1330, VSL1630, VGA-1, VGA-2, VGH-1, VGH-2, VGC01, VGC-2, VGX-1, VGX-2, VXA-1, VXA-2, VBC-1, VBC-2, VXAB, VBA, VFPS, VB-1, VB-2, VFL, VD-4
VCG-100, VCGP-100, VPLCG-100, VAMG-100, VAMGP-100, VPLCG-100A, VBG-100, VBGP-100, VRG-100, VRGP-100, VPLCG-100R, VRSG-100 G, VPLCG-100G, VPG-100, VGG-100, VGGP-100, VWG-100, VWGP-100, VPLCG-100W, VAG-100, VAG-100R, VTG-S, VTGG1-S, VPRSD-100, VSL1330, VSL1630,
MCVLED.pdf
국내 기술지원 및 구매상담처
CUSTOMER SUCCESS IDK
'TIEx > KILLARK' 카테고리의 다른 글
| Killark, 킬락, PETRO BRIGHT, KF1L Series LED FLOODLIGHT (0) | 2013.11.01 |
|---|---|
| Killark, 킬락, LED Floodlight, PETRO BRIGHT Series (0) | 2013.11.01 |
| Killark, Factory Sealed Controls, SEAL-XM Series (0) | 2013.10.04 |
| Killark, 킬락, WH Series, Fittings, Conduit Hubs in Stainless Steel (0) | 2013.10.04 |
| Killark, Switchrack Assemblies, Distribution Equipment, DE26 (0) | 2013.07.14 |