까다롭고 위험한 지역에서 실력을 발휘하는 호크케이블글랜드의 차별화된 특성 5가지

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 Hawke cable gland 가 Flameproof and Increased safety를 요구하는 Harsh and Hazardous Area를 만나 발휘되는 주요 장점 5가지를 살펴봅니다.

 

 

 

 

1. Unique Rear Sealing System
This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

 

2. Unique Inspectable Compound Chamber
The revolutionary Hawke compound chamber has been designed with
inspectability in mind. The pre-lubricated compound chamber can be removed
once the compound has fully cured, allowing full inspection of the flameproof seal. If required minor surface voids can be repaired in situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal, resulting in reduced piece parts, as there is no longer a requirement to separate the seal from the compound chamber.

 

 

 

 

 

3. Zero Cable Damage
The unique Hawke diaphragm sealing system does not damage cable with
'Cold Flow' characteristics. The diaphragm type seal is the only elastomeric seal to comply fully with EN 60079-14 and IEC 60079-14 and is therefore suitable on cables which would otherwise require barrier style cable glands.
The Hawke diaphragm seal is also unique in that it is the only flameproof
elastomeric seal that can be visually inspected in operation - A real benefit to
ATEX inspectors.

 

 

 


4. The Original Reversible Armour Clamp
The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accomodate all types of cable armour or braid. Unlike many of our competitors the correct clamping orientation is marked clearly with a 'W', 'Z' or 'X' and backed up by the presence of a groove in the component. Hawke's RAC clamping system is also fully inspectable when positioned on the cable.

 

 

 

 

 

5. Inspectable Deluge Seal
Hawke's inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01.

 

 

 

Indeed Hawke's deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which could potentially corrode the cable armour

 

 

 

 

 

 

 

기술문의 및 제품상담

고객성공  아이디케이

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 호크 케이블글랜드의 최적선정을 위한 기준 10가지

 

안녕하세요 TIATIP 입니다.

 

오늘은 산업용 케이블글랜드의 선정에 필요한 내용으로는 무엇이 있는지 살펴보도록 하겠습니다. 기본적으로 다음의 10가지 사항에 대한 기본적인 컨셉으로 환경에 적합한 사양을 선정할 수 있겠습니다.

 

 

 

Hawke Cable Glands

 

 

1. 사용환경에 대한 정보확인

□비방폭용

□방폭용

   *Area : Zone0 Zone1 Zone2 

   *Gas : IIA IIB IIC

   *Enclosure Volume=2dm3(2Liter) 보다 크다/작다

  

     

2. 실제 고객사이트에서 요구되는 Standard & Certification

NEC (UL Others    ) 

IEC (CENELEC ATEX IECEx Bassefa Others     )

 

 

3. 케이블의 용도 (단순참고)

Power

Instrument

Control 

□기타

 

 

4. 케이블의 구조타입은 무엇인가

Non-armoured type        

Armoured type

   (Steel tape Single wire, SWA Wire braided MC Jacket Lead sheath  

    □기타 :   )

 

 

 

 

 

5. 케이블의 외경범위는  ( 케이블의 고유 오차범위를 고려할 것 )

Outer sheathe Min.(mm) :                              

Outer sheathe Max.(mm) :                          

 

 

6. Junction Box (단순참조)

   □방폭 등급 :

   □박스 사양 (Ex‘d’,  Ex‘e’,  □기타 방폭(          ),  □비방폭

   □박스 재질 :

   □박스 두께(mm) :

   □박스 Open size :

   □박스 나사산구조 :

 

 

Hawke Cable Gladns and Connectors for Junction boxes

 

Hawke Junction Boxes/Enclosures

 

 

7. Cable glands 의 재질(materials)

Brass     Nickel plated brass   Stainless steel (SUS :      )   Aluminium  

□ 기타 (                   )

 

 

8. Entry thread type and size

*Metric

Metric (M16, M20, M25, M32, M40, M50, M63, M75, M80, M90, M100)

 

*NPT

NPT (1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”, 2-1/2”, 3”, 3/1/2”, 4”       □기타(                  )

 

 

9. Technical Option

Compression (Single, Double)

Cold Flow characteristics

Deluge (DTS01) Ingress protection

Reversing Armour Clamp(RAC) clamping system

Compound barrier type

□ 기타 :

 

 

 

10. Hawke Accessories (해당 사이즈 및 재질 포함한 정보가 요구됩니다)

Sealing washer (Nylon, Red Fibre Washer)

Serrated washer               

Earth Tag

Locknut 

Shroud(LSFZH)

Stopping plug 

Adapter

Thread Conversion Item

□ 기타

 

 

 

 

 

 

 

 

 

내 기술지원 및 구매 상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com


 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke 153RAC Cable Gland

 

안녕하세요 TIATIP 입니다.

 

오늘은 Hawke 호크케이블 그랜드의 베스트셀러 501453RAC과 닮았지만 비방폭지역에서 사용되는 제품인 153RAC를 소개합니다. 폭넓은 산업플랜트 어플리케이션으로 국내외 EPC컴퍼니에서 가장 많이 찾고 계신 타입입니다.

 

 

 

 

 

Hawke Cable Glands
Industrial Area
153RAC Cable Glands

 

 

 

 

 

 

Application

⊙ Outdoor or indoor use.
⊙ For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour 'Y' and steel tape armour ‘Z’ elastomer and plastic insulated cables.

 

 

Hawke 153RAC

 

 

Features

⊙ Provides armour clamping using one clamping arrangement for all armour/braid types.
⊙ Provides a seal on the cables inner sheath.
⊙ Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

 

 

Materials & Finishes

⊙ The 153/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
⊙ Brass NPT entries are nickel plated as standard.
 

 

 

Technical Data

⊙ Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type E1W, E1X, E1Y and E1Z.
⊙ Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
Deluge protection to DTS01 (Deluge seal optional).
⊙ Operating Temperature Range: -60°C to +80°C.

 

 

 

Hawke Accessories for Cable Glands and Junction Boxes/Enclosures

 

 

Hawke Thread Conversion Solutions for Cable Glands and Junction Boxes/Enclosures

 

 

 

153RAC Specification 01.pdf

153RAC Assembly 01.pdf

Hawke 호크 Accessories Old.pdf

Hawke 호크 Accessories New.pdf

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Cable Glands 악세서리모음

 

안녕하세요 TIATIP 입니다.

 

오늘 이시간에는 앞서 살펴보았던 케이블그랜드에 추가로 검토되어야 하는 최적의 악세서리군을 소개하도록 하겠습니다. 각각의 사이트환경과 최종고객사와 EPC사등이 제안하는 RFQ등을 꼼꼼히 살펴보아야 하며, 특히 방폭규정과 국제표준에 위배되지 않는지 기술평가가 이루어져야 할 것입니다.

 

 

Adaptors And Reducers

 

Provides a means of attachment between dissimilar thread types or thread sizes.

 

  • Type 476 Adaptors And Reducers
  •  

     

     

     

  • Type 383 Earth Lead Adaptor
  •  

     

     

  • Type 479 Inline Adaptor (Male to Male)
  •  

     

     

     

  • Type 480 Inline Adaptor (Female to Female)
  •  

     

     

     

     

    Earth Tags

     

    Earthtags are installed between the cable gland and equipment to provide an earth/bond connection.

     

     

     

     

     

     

     

    Entry Thread Sealing Washers

     

    For use at the cable gland/enclosure interface to maintain the ingress protection rating of the equipment.

     

     

     

     

     

     

    Locknuts

     

    Locknuts are used to secure the cable gland body to the cable gland plate or the equipment.

     

     

     

     

     

     

    Stopping Plugs

     

    Provides a means of sealing and stopping unused threaded entries in enclosures where the certification requires the use of stopping plugs.

     

     

     

     

     

     

    Shrouds

     

    We offer a range of shrouds which are used to minimise the risk of dirt or foreign substances gathering on the cable gland body.

     

     

     

     

     

    Insulated Adaptors

     

    Provides electrical insulation between a cable gland or a conduit fitting and an electrical enclosure.

     

     

     

     

     

     

    Blanking/Adaptor Flanges

     

    To close unused cable gland entries and maintain the flameproof integrity of the equipment. To allow metric threaded group 1 cable gland types (653/Universal, 653/T, 623, 453/T, 453/Universal and 453/RAC) to be used in size up spigot entries.

     

     

     

     

    Breather Draining Devices

     

    Provides a method of preventing moisture build-up within a hazardous area approved enclosure whilst ensuring the integrity and Ex approval of the installation is maintained.

     

     

     

     

     

     

    In-Line Swivel Couplings

     

     

     

     

     

      

    Swivel Elbows

     

     

     

     

     

     

     

    Unions

     

    Type 481 (M to F) Union

     

     

     

     

     

    Type 482 (F to F) Union

     


     

     

    각 제품(악세서리)별 상세사양은 첨부파일을 참고하시기 바랍니다.

    2012년까지 제작된 버전과 새롭게 Hawke 전용라인을 통해 공급될 2013년이후 버전이 함께 사용될 수 있겠습니다.

     

     

     

     

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 Thread Conversion 01.pdf

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 321 Cable Gland

     

    안녕하세요?  TIATIP 입니다.

     

    오늘은 Hawke 호크케이블그랜드 가운데 Increased Safety, Ex'e' 타입의 애플리케이션에 해당하는 제품인 Hawke 321 케이블그랜드를 소개합니다.

     

     

     

     

    Hawke

    Cable Glands
    Hazardous Area
    Increased Safety Exe
    Dual Certified ATEX / IECEx

    Hawke 321 Cable Gland

     

     

     

     

     

    The 321 Cable Gland is only available from Hawke nternational distributor Stahl-Syberg.

     

     

     Hawke 321 Cable Gland

     

     

    Application

    The 321 cable gland provides a seal on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland certifi ed Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.

     

     

    Features

    • When used in Increased Safety applications, this cable gland may be used

       with braided cable where the braid and the outer sheath pass into the

       enclosure.

    • The braid must then be suitably terminated inside the enclosure.
       Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079

       series standards for Exe applications.

    • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or

       Aluminium.

    • Brass NPT entries are nickel plated as standard.

     

     

    Hawke Accessories for Cable Glands and Junction Boxes/Enclosures

     

     

     

     

    Technical Data

    • Increased Safety Exe II 2 GD ExtD A21.

    • Certifi cate No’s: Baseefa06ATEX0059X and IECEx BAS 06.0016X.

    • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA,

       IIB and IIC.

    • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN

      61241-0 and IEC/EN 61241-1.

    • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

      60529 and NEMA 4X.

    • Deluge Protection to DTS01.

    • Operating Temperature Range: -60°C to +100°C.

    • Assembly Instruction Sheet: AI 307.

    • Alternative certifi cation options available:

     

     

     

     

    품번예시(기본틀)

    321/2K/M16,321/Os/M20,321/O/M20,321/A/M20,321/B/M25,321/C/M32,

    321/C2/M40,321/D/M50,321/E/M63,321/F/M75,321/G/M80,321/H/M90,

    321/J/M100,321/Os/1/2"NPT,321/O/1/2"NPT,321/A/3/4"NPT,321/A/1/2"NPT,

    321/B/1"NPT,321/B/3/4"NPT,321/C/1-1/4"NPT,321/C/1"NPT,321/C2/1-1/2"NPT,

    321/C2/1-1/4"NPT,321/D/2"NPT,321/D/1-1/2"NPT,321/E/2-1/2"NPT,

    321/E/2"NPT,321/F/3"NPT,321/F/2-1/2"NPT,321/G/3-1/2"NPT,

    321/H/3-1/2"NPT,321/J/4"NPT

     

     

     

     

    Hawke Thread Conversion Solutions for Cable Glands and Junction Boxes/Enclosures

     

     

     

    보다 자세한 사양(Technical Specification)은 다음의 세가지 첨부파일을 참고하시기 바랍니다.

     

     

    321 IDK Spec 20110609.pdf

    321 IDK Spec 20140611.pdf

    321 Assembly 3.pdf

    1.Cable Glands-Group ll.pdf

    2.Hawke Accessories 2013 IDK.pdf

     

     

     

     

     

    내 기술지원 및 구매상담처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke 153RAC Cable Gland의 주요특징 및 기술사양  (0) 2013.01.04
    Hawke Cable Gland 악세서리모음  (0) 2012.12.18
    Hawke 321 Cable Gland  (0) 2012.12.18
    Hawke SB474 Cable Gland  (0) 2012.12.18
    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke SB474 Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크케이블그랜드 가운데 Hazardous Area Cable Glands타입인  SB474 를 알아봅니다.

     

     

     

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    Hawke SB474 Cable Gland

     

     

    Hawke SB474 Cable Gland

     

     

     

    Application

    Outdoor or indoor use. For particular use with:

    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures for gas group IIC, under 2 litres in volume and containing an ignition source.
    d) Enclosures for gas groups IIA or IIB, which are greater than 2 litres in volume and contain an ignition source.

     

     

     

    Features

    • Provides a barrier seal between the individual insulated cores within the

      cable and prevents entry of the products of an explosion into the cable.

    • The required number of holes for the cores are punched in the seal by means

      of a special tool to suit the core size.

    • Provides female running coupler for cable gland or conduit entry.

    • Manufactured in Brass (standard), Nickel Plated Brass,316 Stainless Steel or 

      Aluminium.

    • Brass NPT entries are nickel plated as standard.

     

    악세서리

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

       60529 and NEMA 4X.
    Deluge protection to DTS01.
    • Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

     

    보다 자세한 사양(Technical Specification)은 다음의 세가지 첨부파일을 참고하시기 바랍니다.

     

    Hawke 호크 SB474 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 SB474 조립도 01.pdf

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke Cable Gland 악세서리모음  (0) 2012.12.18
    Hawke 321 Cable Gland  (0) 2012.12.18
    Hawke SB474 Cable Gland  (0) 2012.12.18
    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke PSG553RAC Cable Gland

     

    안녕하세요 TIATIP 입니다

    오늘 이 시간에는 Hawke 호크케이블그랜드 가운데 Hazardous Area Cable Gland Type인 PSG553RAC를 알아봅니다

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    Hawke PSG553RAC Cable Gland

     

     

     

     

    Hawke PSG 553/RAC Cable Gland

     

     

     

    Application

    • Outdoor or indoor use.
    • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures for gas group IIC, under 2 litres in volume and containing an ignition source.
    d) Enclosures for gas groups IIA or IIB, which are greater than 2 litres in volume and contain an ignition source.

     

     

    Features

    • Provides a barrier seal to the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
    • The required number of holes for the cores are punched in the seal by means of a special tool to suit the core size.
    • Provides armour clamping using one clamping arrangement for all armour/braid types.
    • Deluge protection option available contact Hawke Technical Sales for details.
    Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

     

     

    Materials & Finishes

    • The PSG 553/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
    • Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

     

    Technical Data

    • Flameproof Exd and Increased Safety Exe  II 2 GD ExtD A21.
    • Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
    Deluge protection to DTS01. (Deluge seal optional).
    Operating Temperature Range: -60°C to +80°C.
    Alternative certification options available:

     

     

    보다 자세한 사양(Technical Specification)은 다음의 세가지 첨부파일을 참고하시기 바랍니다.

     

    Hawke 호크 PSG553RAC 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 PSG553RAC 조립도 01.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke 321 Cable Gland  (0) 2012.12.18
    Hawke SB474 Cable Gland  (0) 2012.12.18
    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke ICG653Universal/L Cable Gland

     

    안녕하세요 TIATIP입니다.

    오늘은 Hawke 호크케이블그랜드 가운데 Hazardous Area Cable Gland Type인  ICG653Universal/L 을 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    ICG 653/UNIVERSAL/L (for Lead Sheath Cables) Cable Gland

     

     

     

     

     

     

     

     

    ICG 653/UNIVERSAL/L (for Lead Sheath)

     

     

     

    Application

    • Outdoor or indoor use.
    • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.
    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

     

     

    Features

    • Provides a barrier seal between the individual insulated cores within the

       cable and prevents entry of the products of an explosion into the cable.
    • Assembly of the cable gland compresses and distributes the compound

       evenly to create a barrier seal at the point of entry into the enclosure.
    The compound chamber may be separated from the cured compound to

       ensure that the chamber has been effectively filled. If required, external voids

       can be repaired.
    Provides armour clamping, using one clamping arrangement for all

      armour/braid types.
    • Provides a seal and an electrical bond on the cables lead inner sheath.
    • Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    • Provides a cable retention and low smoke and fume, zero halogen seal onto

      the cables outer sheath.

     

     

     

    Materials & Finishes

    • The ICG 653/Universal/L cable gland is manufactured in Brass (standard),

       Nickel Plated Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

    • Exd IIC Gb, Exe II Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    IECEx Certificate No. IECEx BAS 06.0015X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 

      60529  and NEMA 4X.
    Deluge protection to DTS01.
    • Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

     

    보다 자세한 사양은 첨부의 세가지 파일을 참고하시기 바랍니다.

     

    Hawke 호크 ICG653 Universal L 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 ICG653 Universal L 조립도 01.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke SB474 Cable Gland  (0) 2012.12.18
    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke ICG653Universal Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크케이블그랜드 Hazardous Area Cable Gland Type인  ICG653Universal 을 알아보도록 하겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe & Restricted
    Dual Certifi ed ATEX / IECEx

    Hawke ICG 653/Universal Cable Gland

     

     

     

     

     

    Hawke ICG 653/Universal Cable Gland

     

     

     

     

    Application

     

    • Outdoor or indoor use.
    • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’

       elastomer and plastic insulated cables.
    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape

        bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or

        containing an ignition source in a Zone 1 area and exceeding 2 litres in

        volume.

     

     

    Features

     

    • Provides a barrier seal between the individual insulated cores within the

      cable and prevents entry of the products of an explosion into the cable.
    • Assembly of the cable gland compresses and distributes the compound

      evenly to create a barrier seal at the point of entry into the enclosure.
    The compound chamber may be separated from the cured compound to

       ensure that the chamber has been effectively filled. If required, external voids

       can be repaired.
    Provides armour clamping, using one clamping arrangement for all

      armour/braid types.
    Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    • Provides a cable retention and low smoke and fume, zero halogen seal onto

      the cables outer sheath.

     

     

    Materials & Finishes

     

    • The ICG 653/Universal cable gland is manufactured in Brass (standard), 

       Nickel Plated Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

     

    • Exd IIC Gb, Exe II Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    IECEx Certificate No. IECEx BAS 06.0015X.
    • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    • Suitable for use in Gas Groups IIA, IIB and IIC.
    • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

      60529 and NEMA 4X.
    Deluge protection to DTS01.
    • Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

     

    보다 상세한 자료는 첨부된 파일 3개를 확인하시기 바랍니다.

     

    Hawke 호크 ICG653 Universal 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 ICG653 Universal 조립도 01.pdf

     

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke PSG553RAC Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Hawke 501453Universal Cable Glands 제품사양  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke ICG623 Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크케이블그랜드 가운데 Hazardous Area Cable Glands Type인  ICG623 을 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    ICG623 Cable Gland

     

     

     

     

     

     

    ICG 623 Cable Gland

     

     

     

     

    Application

    • Outdoor or indoor use.
    • For use with non-armoured elastomer and plastic insulated cables.
    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

     

     

    Features

    • Provides a barrier seal between the individual insulated cores within the

      cable and prevents entry of the products of an explosion into the cable.
    • Assembly of the cable gland compresses and distributes the compound

      evenly to effect a barrier seal at the point of entry into the enclosure.
    • The compound chamber may be separated from the cured compound to

      ensure that the chamber has been effectively filled. If required, external voids

      can be repaired.
    • Provides a cable retention seal onto the cables outer sheath.

     

     

    Materials & Finishes

    • The ICG 623 cable gland is manufactured in Brass (standard), Nickel Plated 

       Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

    악세서리

     

     

    Technical Data

    • Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    IECEx Certificate No. IECEx BAS 06.0015X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

       60529 and NEMA 4X.
    Deluge protection to DTS01.
    Operating Temperature Range: -60°C to +80°C.
    • Alternative certification options available:

     

    보다 자세한 사양은 첨부의 파일 3가지를 참고하시기 바랍니다.

     

    Hawke 호크 ICG623 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 ICG623 조립도 01.pdf

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke ICG653Universal/L Cable Gland  (0) 2012.12.18
    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Hawke 501453Universal Cable Glands 제품사양  (0) 2012.12.18
    Hawke 501453RAC/L Cable Gland  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke CSB656N Cable Gland

     

    안녕하세요 TIATIP 입니다.

    오늘은 Hawke 호크케이블 그랜드가운데 Hazardous Area Cable Gland Type, CSB656N 을 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe & Restricted
    Dual Certifi ed ATEX / IECEx

    Hawke CSB656N Cable Gland

     

     

     

    Hawke CSB 656N Cable Gland

     

     

     

    Application

    • Outdoor or indoor use.
    • For use with conduit incorporating individual insulated conductors or

    • For particular use with:-
    a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
    b) Cables that exhibit ‘cold flow’ characteristics.
    c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

     

     

    Features

    • Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable or conduit.
    • Seals conductors at entry to enclosure via conduit or enables an existing cable gland to be converted to a barrier type cable gland.
    • The device is fitted with a simple compound filled chamber which permits packing around individual insulated conductors.
    • Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
    • The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
    • Provides female running coupler for cable gland or conduit entry.

     

     

    Materials & Finishes

    • The CSB 656N cable gland is manufactured in Brass (standard), Nickel Plated

       Brass, 316 Stainless Steel or Aluminum.
    • Brass NPT entries are nickel plated as standard.

     

     

    Hawke Accessories for Cable Glands and Junction Boxes/Enclosures

     

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0058X.
    ECEx Certificate No. IECEx BAS 06.0015X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

      60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

      60529 and NEMA 4X.
    Deluge Protection to DTS01.
    Operating Temperature Range: -60°C to +80°C.
    Alternative certification options available:

     

    그 외 상세한 사양은 첨부의 3가지 파일을 참고하시기 바랍니다.

     

    Hawke 호크 CSB656N 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 CSB656N 조립도 01.pdf

     

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke ICG653Universal Cable Gland  (0) 2012.12.18
    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Hawke 501453Universal Cable Glands 제품사양  (0) 2012.12.18
    Hawke 501453RAC/L Cable Gland  (0) 2012.12.18
    Hawke 501453RAC Cable Glands 제품사양  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501453Universal Cable Glands 제품사양

     

    안녕하세요?  TIATIP 입니다.

     

    오늘 이시간에는 Hawke 호크케이블그랜드 가운데 글로벌특허의 집합체이자 타사에서 모방할 수 없는 기술 집약의 명품그랜드를 소개합니다.

    세계적으로 선주들이 직접 사양을 지정할 만큼 조선업계에서는 꾸준히 사용되는 그랜드인데요 바로 501453Universal 입니다.

     

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe & Restricted
    Breathing ExnR Dual Certifi ed ATEX / IECEx

    Hawke 501453Universal Cable Gland

     

     

     

     

    501/453/Universal 시리즈는 Metric Thread와 NPT Thread에 따라 종류가 크게 나누어 지고, 해당 Thread상에서는 Cable의 Outer Sheath의 Min.~Max. 범위에 따라 Size 참조(OS,O,A, B,C, C2, D, E, F, G, H, J)가 각각 나누어 집니다. 하기의 품번은 모두 표준품이 Brass재질의 경우이며, 최근 많이 사용되고 있는 Nickel Plated Brass 재질은 품번 끝에 별도명시하면 됩니다. 간략히 N.P. 또는 N.P.B라고 명시되기도 합니다.

     

    501/453/Universal 시리즈

     

    501/453/Universal/Os/M20

    501/453/Universal/O/M20

    501/453/Universal/A/M20

    501/453/Universal/B/M25

    501/453/Universal/C/M32

    501/453/Universal/C2/M40

    501/453/Universal/D/M50

    501/453/Universal/E/M63

    501/453/Universal/F/M75

    501/453/Universal/G/M80

    501/453/Universal/H/M90

    501/453/Universal/J/M100

    501/453/Universal/Os/1/2"NPT

    501/453/Universal/O/1/2"NPT

    501/453/Universal/A/3/4"NPT

    501/453/Universal/A/1/2"NPT

    501/453/Universal/B/1"NPT

    501/453/Universal/B/1/2"NPT

    501/453/Universal/C/1-1/4"PT

    501/453/Universal/C/1'NPT

    501/453/Universal/C2/1-1/2"NPT

    501/453/Universal/C2/1-1/4"NPT

    501/453/Universal/D/2"NPT

    501/453/Universal/D/1-1/2"NPT

    501/453/Universal/E/2-1/2"NPT

    501/453/Universal/E/2"NPT

    501/453/Universal/F/3"NPT

    501/453/Universal/F/2-1/"NPT

    501/453/Universal/G/3-1/2"NPT

    501/453/Universal/H/3-1/2"NPT

    501/453/Universal/J/4"NPT

     

     

    Application

    • Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘ Z’

      elastomer and plastic insulated cables.
    For particular use with cables that exhibit ‘cold flow’ characteristics.

     

     

     

     

    Features

    Provides armour clamping using one clamping arrangement for all armour/braid

      types.
    Provides a diaphragm seal on the cables inner sheath which will not damage

      cable that has ‘cold flow’ characteristics.
    Provides an outer deluge seal to prevent moisture ingress to the cable

      armour/braid.
    Provides a cable retention and low smoke and fume, zero halogen seal onto the

      cables outer sheath.

     

     

     

     

    Materials & Finishes

     

    The 501/453/Universal cable gland is manufactured in Brass (standard), Nickel 

       Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

     

    Hawke Accessories for Cable Glands and Junction Boxes/Enclosures

     

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, ExnR IIC Gc, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0057X. For sizes Os - F.
    Baseefa Certificate No. Baseefa06ATEX0056X For sizes G - J.
    IECEx Certificate No. IECEx BAS 06.0014X. For sizes Os - F.
    IECEx Certificate No. IECEx BAS 06.0013X. For Sizes G - J.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

    60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529

      and NEMA 4X.
    Deluge Protection to DTS01.
    Operating Temperature Range: -60°C to +80°C.
    Alternative certification options available:

     

     

     

     

    추가 상세사양은 첨부 파일을 참고해 주시기 바랍니다.

     

    Hawke 호크 501453Universal 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501453Universal 조립도 01.pdf

    Hawke 호크 501453Universal 조립도 02.pdf

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고

    'TIEx > HAWKE' 카테고리의 다른 글

    Hawke ICG623 Cable Gland  (0) 2012.12.18
    Hawke CSB656N Cable Gland  (0) 2012.12.18
    Hawke 501453Universal Cable Glands 제품사양  (0) 2012.12.18
    Hawke 501453RAC/L Cable Gland  (0) 2012.12.18
    Hawke 501453RAC Cable Glands 제품사양  (0) 2012.12.18
    Hawke 501423 Cable Glands 제품사양  (0) 2012.12.18
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501453RAC/L Cable Gland

     

    안녕하세요 TIATIP 입니다.

     

    오늘 이시간에는 Hawke 호크 501453RAC/L Cable Gland 를 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    501453RAC/L (for Lead Sheath Cables) Cable Glands

     

     

     

    501/453/RAC/L (for Lead Sheath Cables)

     

     

     

    Application

    • Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’

      elastomer and plastic insulated cables with a lead inner sheath.

     

     

    Features

    Provides armour clamping using one clamping arrangement for all

       armour/braid types.
    Provides a seal and an electrical bond on the cables lead inner sheath.
    Deluge protection option available, contact Hawke Technical Sales for details.
    Provides a cable retention and low smoke and fume, zero halogen seal onto

      the cables outer sheath.

     

     

    Materials & Finishes

    The 501/453/RAC/L cable gland is manufactured in Brass (standard), Nickel

       Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

    악세서리

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

      60529 and NEMA 4X.
    Deluge protection to DTS01 (Deluge seal optional).
    Operating Temperature Range: -60°C to +80°C.
    Alternative certification options available:

     

     

    추가 상세사항은 첨부의 파일 4가지를 참고하시기 바랍니다.

     

    Hawke 호크 501453RAC L 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501453RAC L 조립도 01.pdf

    Hawke 호크 501453RAC L 조립도 02.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501453RAC Cable Glands

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크케이블 그랜드의 베스트셀러 501453RAC 를 소개합니다.

     

     

     

     

    폭넓은 산업플랜트 어플리케이션으로 국내외 EPC사와 조선분야 마린 어플리케이션에서 가장 많이 찾고 계신 타입입니다.

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    501453RAC Cable Glands

     

     

     

     

    501/453RAC 시리즈의 일반적(Brass재질)인 품번은 다음과 같습니다.

    최근에는 Nickel Plated Brass 재질을 많이 사용하고 있으며, 품번 끝에 해당 재질을 기재하면 됩니다. 또는 약식으로 Fully N.P. 라고 명시되기도 합니다.

     

     

    501/453RAC 시리즈

     

     

    501/453/RAC/Os/M20

    501/453/RAC/O/M20 

    501/453/RAC/B/M25 

    501/453/RAC/C/M32

    501/453/RAC/C2/M40

    501/453/RAC/D/M50 

    501/453/RAC/E/M63 

    501/453/RAC/F/M75 

    501/453/RAC/G/M80

    501/453/RAC/H/M90 

    501/453/RAC/J/M100

    501/453/RAC/Os/1/2"NPT

    501/453/RAC/O/1/2"NPT

    501/453/RAC/A/M20

    501/453/RAC/A/3/4"NPT

    501/453/RAC/A/1/2"NPT

    501/453/RAC/B/1"NPT

    501/453/RAC/B/3/4"NPT

    501/453/RAC/C/1-1/4"NPT

    501/453/RAC/C/1"NPT

    501/453/RAC/C2/1-1/2"NPT

    501/453/RAC/C2/1-1/4"NPT

    501/453/RAC/D/2"NPT

    501/453/RAC/D/1-1/2"NPT

    501/453/RAC/E/2-1/2"NPT

    501/453/RAC/E/2"NPT

    501/453/RAC/F/3"NPT

    501/453/RAC/F/2-1/2"NPT

    501/453/RAC/G/3-1/2"NPT

    501/453/RAC/H/3-1/2"NPT

    501/453/RAC/J/4"NPT

     

     

    Application

    • Outdoor or indoor use.
    For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’

       elastomer and plastic insulated cables.

     

     

     

    Features

    Provides armour clamping using one clamping arrangement for all

       armour/braid types.
    Provides a seal on the cables inner sheath.
    Deluge protection option available, contact Hawke Technical Sales for details.
    Provides a cable retention and low smoke and fume, zero halogen seal onto

       the cables outer sheath.

     

     

     

    Materials & Finishes

    The 501/453/RAC cable gland is manufactured in Brass (standard), Nickel

       Plated Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

     

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

       60529 and NEMA 4X.
    Deluge protection to DTS01 (Deluge seal optional).
    Operating Temperature Range: -60°C to +80°C.
    Alternative certification options available:

     

     

    보다 상세한 자료는 첨부파일을 참고하시기 바랍니다.

     

    Hawke 호크 501453RAC 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501453RAC 조립도 01.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501423 Cable Glands 제품사양

     

    안녕하세요 TIATIP 입니다

     

    오늘은 Hawke 호크 케이블그랜드 가운데 501423 을 살펴보겠습니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    501423 Cable Glands

     

     

    501/423 Cable Glands 시리즈

     

     

     

    501/423 시리즈는 Double Compression 타입의 Non-Amoured 케이블에 적합한 사양으로 관통형입니다. 표준재질인 Brass에 해당하는 품번이며, Nickel Plated Brass의 경우에는 품번 끝단에 Nickel Plated Brass 또는 Fully N.P.B 라고 명시됩니다.

     

    501/423/Os/M20

    501/423/O/M20

    501/423/A/M20

    501/423/B/M25

    501/423/C/M32

    501/423/C2/M40

    501/423/D/M50

    501/423/E/M63

    501/423/F/M75

    501/423/G/M80

    501/423/H/M90

    501/423/J/M100

     

    501/423/Os/1/2"NPT

    501/423/O/1/2"NPT

    501/423/A/3/4"NPT

    501/423/A/1/2"NPT

    501/423/B/1"NPT

    501/423/B/3/4"NPT

    501/423/C/1-1/4"NPT

    501/423/C/1"NPT

    501/423/C2/1-1/2"NPT

    501/423/C2/1-1/4"NPT

    501/423/D/2"NPT

    501/423/D/1-1/2"NPT

    501/423/E/2-1/2"NPT

    501/423/E/2"NPT

    501/423/F/3"NPT

    501/423/F/2-1/2"NPT

    501/423/G/3-1/2"NPT

    501/423/H/3-1/2"NPT

    501/423/J/4"NPT

     

     

    Applicaiton

    The 501/423 cable gland provides two independent seals on non-armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath. The cable gland is dual certified Exd and Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.

     

     

    Features

    • Provides superior cable retention to standard unarmoured cable glands, with

       seal at two independent points.
    When used in increased safety applications, this cable gland may be used

       with braided cable where the braid and the outer sheath pass into the

       enclosure. The braid must be suitably terminated inside the enclosure.

    Material & Finishes

    The 501/423 cable gland is manufactured in Brass (standard), Nickel Plated 

       Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

    악세서리

     

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN

       60529 and NEMA 4X.
    Deluge protection to DTS01.
    Operating Temperature Range: -60°C to +100°C.
    Alternative certification options available:

     

    보다 자세한 사양은 첨부파일을 참고하시기 바랍니다.

     

    Hawke 호크 501423 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501423 조립도 01.pdf

     

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501414 Cable Glands 제품사양

     

    안녕하세요 TIATIP 입니다.

     

    오늘은 Hawke 호크케이블그랜드 중에서 501414 타입을 살펴보도록 하겠습니다.

    호크의 일반적인 케이블글랜드와는 달리 Conduit Entry 타입의 케이블글랜드 입니다.

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    호크 501414 Cable Gland

     

     

     

     

    호크 501/414 Cable Gland 시리즈

     

     

    501/414 시리즈의  ISO Metric Thread 타입과 NPT 타입을 각각 다음과 같이 나누어 볼 수 있으며 각각의 Thread타입은 Cable의 Outer sheath의 Min.~Max. 범위별 Size 참조(Os, O, A, B, C, C2, D, E, F)로 구분됩니다.

     

    일반적인 표준사양인 Brass재질의 궁성이며, Nickel Plated Brass는 품번 끝에 별도표기를 하시면 됩니다.

     

    501/414의 고유특성상 Male Entry Thread Size와 Female Entry Thread Size를 상세하게 표기하는 방법으로 품번오류를 최소화할 수 있겠습니다.

     

    501/414/Os/M20(Male)xM20(Female)

    501/414/O/M20(Male)xM20(Female)

    501/414/A/M20(Male)xM20(Female)

    501/414/B/M25(Male)xM25(Female)

    501/414/C/M32(Male)xM32(Female)

    501/414/C2/M40(Male)xM40(Female)

    501/414/D/M50(Male)xM50(Female)

    501/414/E/M63(Male)xM63(Female)

    501/414/F/M75(Male)xM75(Female)

     

    501/414/Os/1/2"NPT(Male)x1/2"NPT(Female)

    501/414/O/1/2"NPT(Male)x1/2"NPT(Female)

    501/414/A/3/4"NPT(Male)x3/4"NPT(Female)

    501/414/A/1/2"NPT(Male)x1/2"NPT(Female)

    501/414/B/1"NPT(Male)x1"NPT(Female)

    501/414/B/3/4"NPT(Male)x3/4"NPT(Female)

    501/414/C/1-1/4"NPT(Male)x1-1/4"NPT(Female)

    501/414/C/1"NPT(Male)x1"NPT(Female)

    501/414/C2/1-1/2"NPT(Male)x1-1/2"NPT(Female)

    501/414/C2/1-1/4"NPT(Male)x1-1/4"NPT(Female)

    501/414/D/2"NPT(Male)x2"NPT(Female)

    501/414/D/1-1/2"NPT(Male)x1-1/2"NPT(Female)

    501/414/E/2-1/2"NPT(Male)x2-1/2"NPT(Female)

    501/414/E/2"NPT(Male)x2"NPT(Female)

    501/414/F/3"NPT(Male)x3"NPT(Female)

    501/414/F/2-1/2"NPT(Male)x2-1/2"NPT(Female)

     

     

    Application

    • Outdoor or indoor use.

    • For use with non-armoured elastomer and plastic insulated cables installed
      in conduit.

    • See technical section for installation rules and regulations.

     

     

     

    Features

    Provides a cable retention seal onto the cables outer sheath.
    When used in increased safety applications, this cable gland may be used with braided cable where the braid and the cables outer sheath pass into the enclosure.

    The braid must be suitably terminated into the enclosure.
    •  Provides female running coupler for cable gland or conduit entry.

    •  The 501/414 cable gland is manufactured in Brass (standard), Nickel Plated  

       Brass, 316 Stainless Steel or Aluminium.
    •  Brass NPT entries are nickel plated as standard.

     

     

    악세서리

     

     

    Technical Data

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529

       and NEMA 4X.
    Deluge protection to DTS01.
    Operating Temperature Range: -60°C to +100°C.

     

    상세사양은 첨부파일을 참고하여 주시기 바랍니다.

     

    Hawke 호크 501414 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501414 조립도 01.pdf

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    Hawke 501421 Cable Glands 제품사양

     

    안녕하세요 TIATIP 입니다.

     

    오늘 이시간에는 Hubbell 허벨그룹에 속해 Connection Solutions 을 책임지고 있는 Hawke 호크제품을 소개합니다.  호크케이블그랜드는 세계젹으로 그 명성을 떨치고 있으며, 중공업 및 EPC사에서 진행하는 조선 및 플랜트분야 애플리케이션에 준하는 모든 벤더에 속해있는 라인업을 갖추고 있습니다.

     

     

     

     

    Hawke 501421 Cable Gland

     

     

     

     

    Cable Glands
    Hazardous Area
    Flameproof Exd & Increased Safety Exe
    Dual Certifi ed ATEX / IECEx

    501421 Cable Gland

     

     

     

    501/421 시리즈는 Single Compression 타입의 Non-Amoured 케이블에 적합한 사양으로 관통형입니다. 표준재질인 Brass에 해당하는 품번이며, Nickel Plated Brass의 경우에는 품번 끝단에 Nickel Plated Brass 또는 Fully N.P.B 라고 명시됩니다.

     

    501/421/2K/M16,501/421/Os/M20,501/421/O/M20,501/421/A/M20,501/421/B/M25

    501/421/C/M32,501/421/C2/M40,501/421/D/M50,501/421/E/M63,501/421/F/M75

    501/421/G/M80,501/421/H/M90,501/421/J/M100, 501/421/Os/1/2"NPT,501/421/O/1/2"NPT,501/421/A/3/4"NPT,501/421/A/1/2"NPT,

    501/421/B/1"NPT,501/421/B/3/4"NPT,501/421/C/1-1/4"NPT,501/421/C/1"NPT,501/421/C2/1-1/2"NPT,501/421/C2/1-1/4"NPT,501/421/D/2"NPT,501/421/D/1-1/2"NPT,501/421/E/2-1/2"NPT,501/421/E/2"NPT,501/421/F/3"NPT,501/421/F/2-1/2"NPT,501/421/G/3-1/2"NPT,501/421/H/3-1/2"NPT,501/421/J/4"NPT

     

     

    501/421 시리즈

     

     

    Application

    The 501/421 cable gland provides a seal on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland is dual certifi ed Exd and Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.

     

     

    Features

    • When used in increased safety applications, this cable gland may be used with

       braided cable where the braid and the cables outer sheath pass into the

       enclosure.

    The braid must be suitably terminated inside the enclosure.

     

     

     

    Materials & Finishes

    The 501/421 cable gland is manufactured in Brass (standard), Nickel Plated

       Brass, 316 Stainless Steel or Aluminium.
    Brass NPT entries are nickel plated as standard.

     

    악세서리

     

     

    Technical Data

     

    Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
    Baseefa Certificate No. Baseefa06ATEX0056X.
    IECEx Certificate No. IECEx BAS 06.0013X.
    Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
    Suitable for use in Gas Groups IIA, IIB and IIC.
    Construction and Test Standards: EC/EN 60079-0, IEC/EN 60079-1, IEC/EN

       60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
    Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529

       and NEMA 4X.
    Deluge protection to DTS01.
    Operating Temperature Range: -60°C to +100°C.


     

    보다 상세한 사양검토는 첨부파일의  케이블그랜드와 악세서리 파트를 각각  참고하시기 바랍니다.

     

    Hawke 호크 501421 01.pdf

    Hawke 호크 Accessories 01.pdf

    Hawke 호크 501421 조립도 01.pdf

     

     

     

     

    국내 기술지원 및 상담구매처

    CUSTOMER SUCCESS IDK

    deric@jadongwha.com

    www.tiatip.com

     

     

     

    저작자 표시
    신고
    Posted by TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


    BLOG main image
    by TIATIP

    카테고리

    TI Story (949)
    TIA (92)
    TIP (194)
    TIEx (593)
    TIS (36)
    TIO (23)
    TiNoTe (10)
    The OtherS (1)