'허벨'에 해당되는 글 167건

  1. 2017.09.04 Killark Expansion Fittings & Deflection Fittings 2017 하반기 킬락 신제품 소개
  2. 2017.08.28 HAWKE 호크 Local Control Station - Hazcon Control Stations 신제품 소개
  3. 2017.07.26 HAWKE 신제품 TOUGHMATE & FIREMATE 시리즈 론칭자료 소개
  4. 2017.06.29 Hubbell 허벨의 2017년도 주요 프로덕트 라인업 훑어보기
  5. 2017.03.08 KILLARK EXB70 Series Motor Starters 소개자료
  6. 2017.01.06 Hubbell Product Categories 허벨프로덕트 카테고리 2017
  7. 2016.12.26 KILLARK 킬락 Terminal Boxes 터미널박스 제품군 소개자료
  8. 2016.08.20 KILLARK 킬락 HKH Rocker Switch 신제품 출시안내
  9. 2016.05.27 케이블 및 케이블글랜드 악세서리 Shroud 의 설치방법소개
  10. 2016.04.23 Punch Tools for SB474 and PSG553RAC Cable Glands 소개자료
  11. 2016.04.13 HUBBELL 허벨그룹 프로덕트 및 시스템 라인업소개 2015 (2)
  12. 2016.03.16 KILLARK Flame Arrestor KB Series 사양소개
  13. 2015.11.17 허벨 Hubbell Harsh & Hazardous Product Lineup (2015 Revision4)소개
  14. 2015.05.15 Killark KDE Series Drain Breather 신제품 출시안내
  15. 2015.01.16 KILLARK KRS KRJ Series Plug KP-303E67 기술사양
  16. 2014.11.01 Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개
  17. 2014.11.01 Chalmit Light 샬밋라이트 Zone 2 Fluorescent 제품라인업 소개
  18. 2014.11.01 Chalmit Light 샬밋라이트 Zone 1 Fluorescent 제품라인업 소개
  19. 2014.11.01 Chalmit Light 샬밋 Fluorescent 제품라인업 소개
  20. 2014.10.06 Chalmit 샬밋 Nevis LED Bulkhead 기술사양
  21. 2014.07.05 Hawke ATEX INLINE Connector, ControlEx Termination Hook up Procedure 자료
  22. 2014.07.05 Hawke Exd Connector, MK IV ControlEx 기술사양
  23. 2014.07.05 Hawke Exd Connector, InstrumEx 기술사양
  24. 2014.07.05 Hawke Live Demateable Connector, InstrumEx Termination Hook up Procedure 자료
  25. 2014.07.05 Hawke Power Connector, PowerEx Termination Hook up Procedure 자료
  26. 2014.07.05 Hawke Exd Connector, PowerEx 기술사양
  27. 2014.06.18 Hawke Thread Conversion Solutions Fixed Elbows 496(F to F) Series 기술사양 소개 (UPD20140531)
  28. 2014.06.18 Hawke Thread Conversion Solutions Fixed Elbows 495 (M to M) Series 기술사양 소개 (UPD20140531)
  29. 2014.06.18 Hawke Thread Conversion Solutions Fixed Elbows 494 Series 기술사양 소개 (UPD20140531)
  30. 2014.06.18 Hawke Cable Gland 321/R Series 기술사양 소개 (UPD20140611)

Killark Expansion Fittings & Deflection Fittings 2017 하반기 킬락 신제품 소개

 

안녕하세요 TIATIP 에디터입니다. 하늘을 보면 가을이 성큼 다가오고 있음을 느끼게 됩니다. 오늘도 건강하고 활기찬 최고의 하루 만들어가시길 바라면서, 킬락에서 2017년도 하반기 새롭게 출시된 Expansion Fittings, Deflection Fittings 자료를 포스팅합니다. 추후 실물자료가 입수되는 대로 스터디하여 추가 포스팅하도록 하겠습니다.

 

 

HUBBELL Harsh & Hazardous

KILLARK

Expansion Fittings & Deflection Fittings

Solutions for the Construction Industry

 

 

1. Expansion Fittings - AF Series, AF8 Series

Applications
AF/AF8 Series Expansion Fittings are for use with IMC or rigid conduit installations. The AF/AF8 Series prevents damage of the electrical installations typically used in buildings and bridges by compensating linear movement due to temperature fluctuation or structural movement. This series provides up to a maximum 4” and 8” conduit movement (2” and 4” in either direction).

 

For applications involving IMC, a 15” minimum length of rigid conduit should be used entering the expansion fitting due to the slightly smaller O.D. of the IMC

 

 

 

 

 

2. Deflection Expansion Fittings - DF Series

 

 

 

Applications
DF Series Deflection Fittings compensate any directional movement between two conduit joints. These fittings can withstand sporadic vibrations channeled by rotating equipment or vehicular traffic. The DF
Series allows for a ¾” contraction and extension movement as well as a 30° angular deflection to any direction and still maintain its structural integrity.

 

3. Expansion Fittings - TAF Series

 

Applications
TAF Series Expansion Fittings compensate for linear movement between two conduit joints in runs of EMT (electrical magnetic tubing) conduit. This series provides up to a maximum 4” conduit movement (2” in either direction). Aids in preventing damaged conduit runs caused by temperature fluctuations and structural variations by assisting in movement.

 

4. Bonding Jumpers - AJ Series, AJE Series

 

Applications Type AJ is used for bonding two rigid, EMT or IMC steel/aluminum conduits together to ensure the required electrical conductivity between raceways.


Type AJE is used for bonding conduit to flat surfaces, such as boxes to ensure the required electrical conductivity between raceways.

 

5. Expansion Combo Fittings - AF Series, DF Series, AFDF Series

 

 

Applications
AFDF Series Expansion/Deflection Combo Fittings compensates for linear and 3/4” level movement in any direction between two conduit joints in runs of IMC or rigid conduit.
AFDF Series combines the DF style fitting with the AF style fitting for an additional 4” movement (2” in either direction) when the 3/4” linear movement in the DF is not enough. Helps prevent damaged conduit
runs caused by temperature fluctuations and structural variations by assisting in movement.

 

 

Technical Data

Hubbell, Killark, Fittings, Fitting, Expansion Fittings, Deflection Fittings, Expansion/Deflection Combo Fittings, Expansion Conduit Unions, Bonding Jumpers, AF Series, AF8 Series, AFDF Series, AJ Series, AJE Series, DF Series, TAF Series, UNFS Series, UNYS Series, UNFL Series, UNYL Series, 허벨, 킬락, 피팅, 방폭피팅

KILLARK Expansion & Deflection Fittings 20170904 EN.pdf

6.Killark Fittings IDK F.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

HAWKE 호크 Local Control Station - Hazcon Control Stations  2017 신제품 소개

 

안녕하세요 TIATIP 에디터 입니다.

오늘 이 시간에는 HAWKE 사에서 공급되는 방폭위험지역용 LCS(Local Control Station), CS (Control Station) Hazcon Sereis 에 대하여 간단히 소개드립니다.

 

 

Hawke

Hazcon Control Stations

Glass Reinforced Polymer (GRP) & Stainless Steel (SUS) Control Stations
The Hazcon control station range is a key addition to the Hubbell Harsh and Hazardous product line. Developed to exceed customer expectations, the range further enhances our connection and control solution based product portfolio.

 

 

 

 

Applications

• For use in areas designated Zone 1/21, Zone 2/22, where explosive gases and combustible dusts are present, i.e. petrochemical facilities, power plants, chemical sites and petroleum refineries.
• Fuel processing or storage plants where potential hazards exist
• Wide range of pushbuttons and 2 or 3 way selector switches, for use in actuation and indication of control systems status in remote environments and maintaining operator safety with immediate action Emergency Stop systems

 

 

 

 

Features

• Ambient temperature operational range -50ºC to +60ºC
• Available in 316 stainless steel or grade 316L or high impact resistant Glass Reinforced Anti-static Polymer
• UL flame retardant rating of V-0 on GRP enclosure
• IP66 ingress protection
• Brass earth continuity plates available for metric size cable entries (GRP version)
• 5 enclosure sizes offering 1 - 6 gang operator options
• LED indicator with 5 coloured lenses (amber, red, blue, green or clear)
• Single and double pushbuttons
• Emergency stop button option - pull or twist to release. Key release option also available.
• Silicone gasket on operators and enclosures
• Moulded one piece Silicone gasket on operators and enclosures
• High switch current contact blocks
• LED's are suitable for multifunction voltages for both AC and DC applications ranging from 12V to 254 volts.
• Easy installation onto structures without removing the enclosure lid

 

 

 

 

 

Global Certification

One of the design criteria of the Hazcon range was to achieve a universal solution that met the testing standards of ATEX/ IECEx and UL. Certified by Demko to the ATEX standards and UL to IECEx, Canadian & US standards, the product can be optionally marked cULus for use in both America and Canada. ATEX/IECEx labeled products are also marked EAC and Inmetro, making the product suitable for installation in Brazil, Russia, Belarus and Kazakhstan.

 

 

 

Technical Data

Hubbell, Hawke, Hazcon, Local Control Station, LCS, Control Station, CS, 허벨, 호크, 컨트롤스테이션, 토컬컨트롤스테이션, 콘트롤스테이션, 로컬콘트롤스테이션

Hazcon Control Station CAT 20170707.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

 

       

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

HAWKE 신제품 TOUGHMATE & FIREMATE 시리즈 론칭자료 소개

 

안녕하세요 TIATIP 입니다. 2017 여름 호크 HAWKE 사의 HOT한 신제품 ToughMate, FireMate Series 를 간단히 살펴보도록 하겠습니다.

 

 

HAWKE

HAWKE International

ToughMate for the most servere environments

FireMate for the most servere environments

 

 

Introducing the new FireMate and ToughMate range from Hawke International. Designed to provide unparalleled strength in evacuation and rescue systems, the FireMate and ToughMate range of Connectors, Cable Glands and Enclosures will provide a safe and reliable solution wherever safety is the highest priority. 

 

 

 

 

Safety, when you need it most !

When you need to get people out, you need a system that can take the pressure. The FireMate and ToughMate range has been designed specifically to provide a complete solution for rescue and evacuation applications. Combining the FireMate’s fireproof technology with the ToughMate’s unparalleled industrial strength the range provides a system that will maintain its structural integrity – even in the most severe conditions. Ideal for overground and underground rail networks, mariner safety and commercial and public buildings – choose FireMate and ToughMate wherever safety is imperative.

 

 

HAWKE ToughMate Cable Glands

 

The ToughMate range combines the Hawke International's market-leading Cable Gland technology with rigorous in-house third party industrial testing to ensure exceptional performance, even in the most severe conditions. Ideal for heavy industrial or critical safety environments which are exposed to harsh chemical, dust or extreme weather conditions the ToughMate Cable Gland range combines easy assembly with exceptional strength to increase productivity and give you peace of mind when you need it most.

 

- ToughMate CW Cable Gland (TM CW Cable Gland)

 

- ToughMate E1W Cable Gland (TM E1W Cable Gland)

 

- ToughMate A2 Cable Glans (TM A2 Cable Gland)

 

 

HAWKE ToughMate Connectors (TM Connector)

The ToughMate connector has been developed to be used on underground and overground rail networks, commercial and public buildings where equipment needs to withstand the harshest of environments.

 

 

 

 

Tested to the latest Industrial BS EN 61984 and LVD 2014/35/ EU our connector will maintain its electrical and structural integrity during the toughest conditions. The product is designed to be used in emergency lighting circuits; fire alarms; voice alarms; shutdown systems and fire detection.

 

 

 

HAWKE ToughMate EJB Enclosures (TM EJB Series Enclosure)

 

 

 

Our best-selling EJB Enclosure just got tougher. Developed to be used on underground and overground rail networks and commercial and public buildings where equipment needs to withstand the harshest environments, the ToughMate EJB Enclosure is ideal for applications where safety is imperative.

 

 

 

 

 

HAWKE FireMate Cable Glands

The FireMate range of Cable Glands combine Hawke International's marketing leading Cable Gland design with unparalleled fireproof strength. For incredible quality and easy assembly look no further than the Hawke International FireMate cable gland range.

 

 

- FireMate CW Cable Gland (FM CW Cable Gland)

 

- FireMate E1W Cable Gland (FM E1W Cable Gland)

 

- FireMate A2 Cable Gland (FM A2 Cable Gland)

 

 

HAWKE FireMate Connectors (FM Connector)

The FireMate safety critical connector has been developed to be used on underground and overground rail networks, commercial and public buildings where it is critical for equipment to work during an evacuation and rescue situation.

 

 

Tested to the latest fire standards BS EN50200:2006 and BS8434-2:2003 + A2 2009 our connector will maintain its electrical and structural integrity during the harshest of fire conditions. The product is designed to be used in escape route safety equipment; emergency lighting circuits; fire alarms; voice alarms; shutdown systems; fire detection.

 

 

HAWKE FireMate EJB Enclosures (FM EJB Series Enclosure)

 

The FireMate EJB Enclosure combines all the incredible strength and corrosion resistance of our best-selling EJB range with incredible fire-proof technology. For simple installation and superior strength, the FM EJB is the ideal choice

 

 

 

 

 

Technical Data

허벨, 호크, Hubbell, Hawke, Tough Mate, Fire Mate, TM Cable Gland, FM Cable Gland, TM Connector, FM Connector, TM Enclousre, FM Enclosure

HAWKE ToughMate.zip

HAWKE FireMate.zip

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

       

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hubbell 허벨의 2017년도 주요 프로덕트 라인업 훑어보기

 

안녕하세요  TIATIP 입니다. 오랜만에 포스팅시간을 갖네요.

더운 여름, 많은 불확실성과 변화속에서 어려움을 겪고 있는 육상플랜트 및 해양플랜트 그리고 선박조선산업에 시원한 훈풍이 다시 불어오길 희망하면서, 여러분을 응원하겠습니다.

 

오늘 이시간에는 허벨의 2017년도 주요 브랜드별 프로덕트 라인업을 간략히 소개드리고자 합니다. 허벨그룹의 대표 웹사이트(www.hubbell.com)  를 통해 보다 자세한 내용을 확인하실 수 있겠습니다.

 

 

 

1. KILLARK

 

 

Controls

 

 

 


The Killark portfolio of control products come in both metallic and non-metallic designs. Our broad line of controllers will work in harsh areas where corrosion and chemical breakdown can affect a product that is
not suitable for the environment.
• Push buttons, Selector switches, Mushroom ESTOPS & more
• LED Pilot Lights
• Class 1 Division 1 & 2, Zone 1 & 2, 21 & 22
• Quad Listed for UL, NEC, CSA, IECEx/ATEX directives

 

 

Plugs and Receptacles

• Plugs and receptacles provide solutions for safely supplying power
to fixed and portable equipment in hazardous location areas
• Copper-free, corrosion resistant aluminum construction
• NEMA “Blade”-style product line includes 15A/20A, 125V/250V
configurations
• Pin-and-sleeve devices available in up to 600V/ up to 200A
configurations
• Interchangeability with other manufacturer’s devices ensures
installation flexibility

 

 

Connectors, Fittings, and Cable Glands

 


Killark/Hawke fitting lines not only exceed the demands of the challenging and hostile market but integrate ALL applications for industrial areas as well. Our Connectors, Seal Off, and features include:
• Fitting hub sizes from ½” to 4”
• Optioned copper-free aluminum or tri-coated Duraloy® iron
• Suitable for harsh and hazardous OR standard locations
• Corrosive resistant material
• NEC, CEC, ATEX and IEC certifications on variety of fittings and cable glands

 

 

Enclosures / OEM Solutions

 

 


• Killark enclosures can be factory or field modified per customer’s
specifications Extensive range of sizes in copper free cast aluminum
alloy, 316 stainless steel and high carbon painted steel.
• For Class I, Class I Div. 2, Class II, Ex db, Ex e Ex tb Zone 1 & 2, Type
4X IP66 ratings.
• The widest selections of viewing windows, control operators, switch
operating handles, drain breathers.
• QUAD Approvals for global certifications: UL, CSA, ATEX, IEC
Ex, INMETRO

 

 

Distribution and Control Equipment

 


• Our Harsh & Hazardous group offers solutions for your power
distribution and control needs. Lighting, trace heating and power
distribution, both factory-sealed and non-factory sealed.
• Quad Approval for global certification, our product versatility
allows Killark to use multiple enclosure coupling techniques to
cater to all demands of our clients.

 

 

Lighting

 

 


• Killark offers a full line Company offering; HID, Fluorescent, QL, Xenon, and LED technologies
• Encompass the latest in long life, and energy and labor saving LED
technology.
• Many Quad listed products. Quad Listed for UL, NEC, CSA, IECEx/ATEX
directives
• Lighting Layout Design Services Available

 

 

 

 

2. Acme Electric

 

Land Rig Rated Transformers

 

 

• Structure, Core & Coil designed for land rig drilling applications
• Rigid supports for HV and LV terminals
• Low and Medium voltages available
• Forklift accessible base for ease of installation
• NEMA 3R outdoor enclosure

 

 

3. Burndy

 

 

HYGROUND


Compression Grounding
BURNDY HYGROUND is the safest, most costs-effective, time-efficient and easily inspected grounding system available today. HYGROUND can be used in even the most inclement weather conditions – rain, wind or snow.
• Easy installation – No special training necessary
• No galvanic corrosion – Made of pure wrought copper like the conductor
• Safe – Non hazardous installation
• Meets Industry Standards and Codes – IEEE 837, UL467, NEC, NFPA, and
more.

 

 

 

4. Chalmit

 

 

Protecta (Non-emergency and emergency)

 

 

 

 


Approved to: ATEX, IECEX, Inmetro, EAC
Features:
• Boasting a market leading 120,000 maintenance free hours
• Industry unrivalled performance and photometry
• Multiple mounting options: Ceiling, wall, suspended and pole mounted
options available
• IP66/IP67 ingress protection and DTS01 deluge protected
• Battery heating for low temperature emergency operat

 

NexLED

 


(Non-emergency and emergency)
Approved to: ATEX, IECEX, Inmetro, EAC, CSA
Features:
• Can be installed in gas groups IIA, IIB and IIC, with highly visible and
instant light
• Long life with no re-lamping required. Over 60,000 hours
continuous operation
• Highly energy efficient, with very low power consumption
• Available in both standard and emergency options, with low
temperature versions operating down to -45°C

 

 

5. Gai-Tronics

 

 

GAI-Tronics IP Solutions SP2

    

 


• Serverless IP paging and intercom system
• Simple operation with cutting-edge technology
• 2 to 4,096 stations
• UL, IEC, and ATEX approvals
• Type 4X, 12 & IP65, 66 Elemec3
• Networked IP Public Address and General Alarm (PA/GA) system
• Multiple single, N+1, and A/B architectures on a single network
• Up to 35.2 kW of audio power per controller in up to 64 zones
• Compliant to UKOOA, PFEER, IMO, ABS, SOLAS, DNV, CCS, and NORSOK
guidelines Hazardous Area Telephones
• World’s first UL Class I Division 1 VoIP telephone
• Native VoIP operation
• Noise-cancelling microphone
• Simple online configuration
• Type 4X, available PoE operation

 

 

6. Greason Reel

 

 

FESTOON SYSTEMS

 


I-Beam Festoon Systems and Trolleys
• Standard & Custom sizes
• 4 Types of Finish
• Stainless Steel
• Galvanized
• Marine Duty Paint
• Standard Paint
• Can be fitting with spark proof wheels


DRAG CHAINS
PowerTrak® Cable Carriers
House and protect expensive cables during movement
• Custom Designed for your needs
• Available in 316 Stainless
• 304 Stainless
• Carbon Steel with zinc plating

 

 

 

7. HADAR

 

 

HDL106 (Non-emergency and emergency)

 


Approved to: ATEX, IECEX, Inmetro
Features:
• Ex em construction
• Modular design allowing up to 6 interlinked luminaires, each providing a
delivered output of >5000lm
• 80,000 maintenance free hours
• Highly efficient, with instant on crisp white light output
• At only 6kg per module, it is an extremely lightweight solution
• Emergency version only 9kg, over 60% lighter than Exd products

 

 

8. HAWKE

 

Cable Glands


Approved to: ATEX, IECEx, Inmetro, EAC, cCSAus, Burea
Veritas, DNV, CNEX, UL, Soncap, ABS
Features:
• Features multiple patented features to offer unrivalled safety, ease of
installation and inspection and lowest lifetime cost of ownership
• Fully inspectable Exd barrier gland seals
• Only proven solution to prevent damage to cables exhibiting cold
flow characteristics

 

Exe Enclosures


Approved to: ATEX, IECEx, Inmetro, EAC, UL, ULc, cCSAus, Burea Veritas,
DNV, Soncap
Features:
• Available in 316 stainless steel or GRP with 34 standard sizes available
to suit every application

• Amazing flexibility

– available fully populated, drilled and assembled, or as empty component
certified enclosures
• Up to 55% greater aperture access than other manufacturers allowing
for faster termination and inspection

 

Ex Connectors

 


Approved to: ATEX, IECEx, Inmetro, EAC, cCSAus, Burea Veritas, DNV
Features:
• Complete range including fiber optic, data, instrumentation,
control and power connectors

• InstrumEx connectors offer live make-and-break functionality for
improved safety
• ControlEx connectors offer solutions for cables ranging from
3-core, up to 60 cores, and 0.5mm2 to 35mm2 conductors

 

 

9. HUBBELL Industrial Controls

Hubbell DC Devices

  

 


Heavy-Duty DC Contactor and Switch designs with 40+ years in-service
(Formerly produced by Allis-Chalmers/Siemens) used in rail/transit, gas and
oil well drilling equipment, mining machinery, and more.
• High DC-Current Interruption and Switching (Models range from 200A to 5000A)
• DC-Voltage Controlled (12-250VDC) (AC Control Available on Some
Models)
• Silver Alloy Main Contact Tips
• Silver Plated Current Carrying Parts
• High Dielectric & Mechanical Strength
• Up to 8 Auxiliary Contact Circuits

 

 

10. POWEROHM RESISTORS

 

 

Powerohm® Resistors

 


Resistor solutions for the Gas and Oil Industry

• Power Resistors
• Force Cooled Braking Resistors
• Brake Modules
• Neutral Grounding Resistors
• High Resistance Grounding Systems (HRG)

 

 

11. RIGPOWER

 

 

RigPower Connectivity

 


RigPower offers an extensive collection of connectivity solutions for the
drilling, industrial, and entertainment industry. Benefits include:
• High Amperage, Single Pole Connectors
• Amperages suitable for up to 1135A (Single Pole Devices) and up to
4000A (in Bolted Designs)
• Color Coded Connectors (10 Configurations available) allow for
ease of installation and reduction in misconnection of electrical phases
• Application specific features (such as available “Flexible Electromagnetic
Shield” for Variable Frequency Drive installations)

VFD-1 Series
• Service Ratings: 1135 Amps, 2000 Volts
• Small #24 Shell Size Footprint
• Contact Technology provides self-adjusting (Multilam) contact
force for resistance to the severe load variations and vibration
encountered in drilling service
• The conductivity of the cable shield braid is carried completely
through the connector to ensure uninterrupted 360 degree
protection of EMI radiation
• Cable-Receptacle mating pairs

• Available in nine colors for easy equipment/phase identification

 

 

12. Vantage Technology

 

XP STAR-LINE

 

Area Classification: Class I, Div. 1 & 2, Groups B, C & D
Class II, Div. 1 & 2, Groups F & G
Ex D IIC
Class I, Zone 1, AEx D IIC
II 2 GD Ex D IIC
Ambient: -45°C to 60°C
Ingress Protection / Type: IP 66 / 67
T-Code: T6 (T 70°C)
Listed By: UL / CSA / KEMA / QPS / CML
Compliance With: NEC / CEC / ATEX / IECEx
Conforming To: UL 1203 / UL 60079 / CSA 22.2 / E60079
EN 60079 / ISO-IEC 60079
Features:
• 10 through 100 Contact Control Inserts @ 250, 480 Vac or 125 Vdc
• 32, 64, 125 & 260A Power Inserts @ 1000Vac or 500Vdc
• Cable / Cord or Tapped NPT Mount Plug
• J-Box, Panel, NPT or In-Line Receptacle
• Live Make-Break @ 50/60 or 400Hz
• Aluminum or Stainless Steel

 

 

13. WIEGMANN

 

JIC and Traditional Wall Mount Enclosures

Industry Standards:
• UL Listed Types 4, 4X & 12
• NEMA Type 4, 4X & 12
• UL Classified IEC 60529 IP66
• CSA Certified

Features:
• Made in USA from 304 and 316 Stainless Steel
• Continuously welded seams
• Poured-in-place polyurethane door gasket
• With external door clamps or with ¼ Turn Latches
• Grained finish
• Extensive accessory offering
• Offered in sizes from 6”x6”x4” to 60”x36”x12” (HxWxD)
• Units with openings to accept disconnect handles are also offered

 

 

Technical Data

허벨, 킬락, 호크, 샬밋, Hubbell, Killark, Acme Electric, Burndy, Chalmit, Chalmit Lighting, Gai-Tronics, GaiTronics, Greason Reel, Hadar, Hawke, Hubbell  Industrial Controls, POWEROHM, PowerOhm Resistors, RIGPOWER, Vantage Technology, Wiegmann

Hubbell Products at a Glance 2017 EN.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

     

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

KILLARK EXB70 Series Motor Starters 소개자료

 

안녕하세요 TIATIP 입니다. 어느덧 봄이 우리앞에 다가서 있습니다.

KILLARK 킬락에서는 이번에 새로운 방폭위험지역에서 사용가능한 모터스타터 구성을 선보이고 있는데요. 다음과 같이 간단히 살펴보고자 합니다.

 

 

HUBBELL Harsh & Hazardous

KILLARK

EXB70 Series

Motor Starters for Harsh and Hazardous Environments

 

 

MOTOR STARTERS TO MEET THE GLOBAL DEMANDS
FOR HARSH & HAZARDOUS LOCATIONS
BOTH ON SHORE AND OFF SHORE APPLICATIONS

 

 

Killark offers a wide range of motor starters supplied with internal motor controllers from leading internationally recognized control manufacturers. We provide across the line magnetic starter only, combination magnetic starters and manual starters with both NEMA and IEC controllers.


Applications include Explosion / Flame Proof, Hazardous Dust, Wet, Hose Down and Corrosive environments on shore and off shore.

 

 

 

 

Applications
The EXB70 Series of across-the-line starter and combination motor control centers utilize SSNR (single speed non-reversing) IEC starters. The EXB70 starters is for use in locations made hazardous due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers and flyings, and areas which are subject to corrosion, weather and dampness.
• Petroleum Refineries
• Oil Rigs & Platforms
• Chemical/Petrochemical Plants
• Pharmaceutical Facilities
• Automotive Repair Facilities
• Aircraft Facilities
• Wet/Corrosive Environments
• Grain Elevators
The EXB70 Series is offered with the ABB brand AF contactor / TF overload relay, XT circuit breakers and motor circuit protectors.

 


Materials
• Box & cover: Cooper free aluminum (less than 4/10 of 1%)
• Finish: Aluminum lacquer paint – Grey
• O-Ring Gasket Material: Nitrile (BUNA-N) compound
• Stainless steel, A2, cover screw.
• CB/MCP Handle – Copper free aluminum
• Reset Operator – Thermoplastic polyester button molded onto stainless steel shaft. Aluminum shroud, black anodized.

 

 

Features
• Copper free cast aluminum construction. High in strength, lighter in weight, corrosion resistant

• Stainless steel metric cover bolts
• Cover o-ring supplied as standard for TYPE 4X and IP66 applications.
• Starters supplied with hinged covers as standard
• Bi-directional bolt on mounting lugs made from a ductile aluminum alloy which will adjust to irregular surfaces without causing damage to the casting.
• Starter only supplied as standard with a manual reset button and two future control operator openings with plugs.
• Combination starter supplied as standard with a manual reset button, through the door circuit breaker handle and two future control operator openings with plugs.
• Each starter comes with three NPT conduit openings in both the top and in the bottom allowing for power, control and drain/breathers.
• The EXB70 can be ordered with custom sizes & quantity of holes both in NPT and metric.
• Additional control operators can be supplied along with addition future operator openings.

 

 

Technical Data

Hubbell, Killark, Harsh & Hazardous, Explosion proof, EXB, EXB70 Series, B70 Series, B7MS Compact Series, B7MSN Compact Series, XS Series, FXS Series, Motor Starters, 허벨, 킬락, 방폭박스, 방폭외함, 모터스타터, 모터스타터박스, 모터컨트롤박스

EXB70 Motor Starter 201701XX EN.pdf

5.Killark Enclosures IDK E.pdf

4.Killark Distribution IDK DE.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hubbell Product Categories 허벨프로덕트 카테고리 2017

 

안녕하세요 TIATIP 입니다. 희망가득한 새해 열어가고 계신지요. 새해 노력하시고 도전하시는 일들과 소망하시는 일들모두 순조롭게 이루어지길 기원합니다. 이번에 허벨그룹의 홈페이지가 새롭게 개편되면서, 카테고리별로 편입된 다양한 브랜드에 대해 간략히 소개드리고자 합니다. 하기 주소링크를 통해 검토가 가능합니다.

 

 

 

 

 

HUBBELL_LIGHTING  CONTROLS

indoor, outdoor, decorative, emergency, controls, inverters

commercial outdoor lighting, residential lighting, controls & sensors, industrial lighting, commercial indoor lighting, lighting controls & sensors, lighting components, emergency & exit lighting, harsh & hazardous lighting

 

 

 

 

HUBBELL_WIRING & ELECTRICAL

wiring devices, electrical systems, rough-in, wire management, testers

ladders & platforms, electrical system & devices, wiring devices, cabel and wire management, industrial controls, connectors, inhibitors, contact adis, sealants, construction rough-in, wire/cable/hose management, safety, grounding, enclosures, test equipment, hardware, controls and distribution, tools, dies & accessories, steel boxes, covers & accessories, HAVC, commercial fittings, nonmetallic cable boxes, floor boxes, kits & accessories, wall plates, weatherproof

 

 

 

 

 

HUBBELL_POWER & UTILITIES

arresters, bushings, insulators, hadward, earth anchors, drains

bushings, communication, utility switching & fusing, fasteners, enclosure-below groud, line construction, insulators, ground & bonding, drain & trench system, inhibitors, contact aids, sealant, anchoring * foundation, connectors, toos, dies & accessories, enclosures-above ground, arrestors

 

 

 

 

 

HUBBELL_DATACOM

copper, fiber optic systems and connectors, racks, wireway

outside plant (OSP) hardware, tool, dies & accessories, grounding and bonding, hardware, datacom, wire/cable/hose management, copper solutions, audio/vdio, metal, inhibitors, contact aids, fiber, connectors, delivery, residential solutions

 

 

 

 

Searching for specific HUBBELL brand ?

https://www.hubbell.com/hubbell/en/brands

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

KILLARK 킬락 Terminal Boxes 터미널박스 제품군 소개자료

 

안녕하세요 TIATIP 입니다.

이제 2016년도 딱 한 주가 여러분들에게 남아있습니다. 올 한 해 마무리 잘 하시고, 희망이 있는 내년과 그 이후를 멋지게 설계해 가시길 바랍니다.

 

오늘 이 시간에는 킬락에서 제공하고 있는 터미널박스의 제품군 자료를 모아,

여러분들께 다시한번 소개해드리는 시간을 갖고자 합니다. 여러 Conduit System 및 Fittings 공사에 있어 유용하게 사용되는 애플리케이션이므로, 다양한 자재와 관련 구성을 눈여겨 보셨으면 합니다.

 

 

Hubbell Harsh & Hazardous

KILLARK

Terminal Boxes for Harsh and Hazardous Environments

USF Series, SJIC Series, SJICH Series, GE Series, HK Series, GEB Series

 

 

 

TERMINAL BOXES TO MEET THE GLOBAL DEMANDS FOR HARSH & HAZARDOUS LOCATIONS BOTH ON SHORE AND OFF SHORE APPLICATIONS


The widest range of enclosure sizes in market today. A variety of material to choose from, stainless steel to cast aluminum. Flat covers with latches to threaded round screw covers. The choice of rail mounted terminal blocks from internationally recognized terminal block manufacturers. Applications include Explosion Proof, Increase Safety, Wet, Hose Down and
Corrosive environments.

 

 

 

 

TERMINAL BOX QUICK SELECTION

 

 

SJIC & SJICH Series

SJIC & SJICH Series Screw cover JIC terminal boxes in powder painted
carbon steel or 316 stainless steel. Optional hinged covers available, 15
sizes to choose from.
Class I Div. 2’ Class II Div.1 & 2, Ex e II; Ex IIIC IP66, TYPE 4

 

 

 

USF Series

 

 

USF Series Slope flange, hinged & latch style terminal boxes. 316 stainless
steel as standard. Optional paint carbon steel. 38 Sizes to choose from.
Class I Div. 2; Class II Div.1 & 2, TYPE 4X, Ex e II; Ex IIIC IP66

 

 

 

 HK-T Series

HK-T Series threaded screw cover terminal boxes. Small compact sizes.
Multi cover options. Copper free cast aluminum.
Class I Groups B, C & D, Class II Groups E, F & G, TYPE 4X Ex d IIC, Ex e II, Ex IIIC, IP66

 

 

 

 

GEB-TB Series

GEB-TB Series threaded screw cover terminal boxes. Small and compact
with a wide variety of conduit / gland opening sizes, both NPT and metric.
Copper free cast aluminum.
Class I Groups B, C & D, Class II Groups E, F & G, TYPE 4X, Ex d IIC, Ex e II, Ex IIIC IP66

 

 

 

GEC-TB Series

GEC-TB Series threaded screw cover terminal boxes. Small and compact
with a variety 3/4 NPT conduit opening arrangements. Copper free cast
aluminum.
Class I Groups B, C & D, Class II Groups E, F & G, TYPE 4.

 

 

Technical Data

Hubbell, Killark, Terminal Box, Junction Box, Enclosure, USF Series, SJIC Series, SJICH Series, GE Series, HK Series, GEB Series

Original_HKSB-TERMBOX.pdf

5.Killark Enclosures IDK E.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

KILLARK 킬락 HKH Rocker Switch 신제품 출시안내

 

안녕하세요 TIATIP 입니다. 새롭게 업그레이드된 KILLARK 킬락 HKH Rocker Switch 가 미국에 이어 론칭을 맞이하게 되었습니다. 관련자료가 간단히 준비되어 이를 공유합니다. .

 

 

 

 

 

KILLARK

Controls

HKH Series

POCKER SWITCH for Harsh and Hazardous Environments

 

 

 

 

Features:
• Positive functions for ON and OFF to protect against accidental activation
• Luminous Strip for ease of sight
• 20A Contact Blocks
• For Wet Locations requiring Nema 4X or IP66
• Indoors or Outdoors in Class 1 Div 2 Harsh and Hazardous Locations
• IECEx and ATEX Certified, IP66 Ingress Protection
• Zone 1 & 2, Zone 21 & 22, Exde IIC Gb

 

 

 

 

Technical Data

킬락, 허벨, KILLARK, Hubbell, HAZCON, HKH Series, Rocker Switch, HKSRS, HKH1AND2RS4K8, HKH1ANDARS4, HKH1AND2RS1K8, HKH1ANDARS1, HKH1BND2RS4K8, HKH1BNDARS4, HKH1BND2RS1K8, HKH1BNDARS1

HKH RS Press Release 201608XX EN.pdf HKH RS Introduction Sheet 201608XX EN.pdf HKH RS BRO 201605XX EN.pdf

HKH RS Flyer 201608XX EN.pdf

2.Killark Controls IDK C.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다. 

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

케이블 및 케이블글랜드 악세서리 Shroud 의 설치방법소개

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 산업현장의 Connection Solution 가운데 Cable 과 Cable Glands 악서리 Shroud 의 설치가이드를 제시하고자 합니다.

 

 

Shroud (슈라우드)

사전적의미로는 슈라우드는 원래 덮다, 싸다의 뜻을 가지고 있으며, 보호가 필요한 케이블글랜드와 케이블의 연결부를 감싸는 기능을 갖고 있습니다.

 

 

 

 

Shroud는 Amoured Cable/Cable Glands  및 Non-Armoured Cable/Cable Glands 모두 적용가능하며, 각각의 Shroud는 케이블의 외경 즉, Size Reference (Outer Sheath Diameter of the Cable) 별로 이니셜이 표기되어 있습니다. 이는 케이블글랜드의 사이즈과 동일하게 맞추어 선정하면 되겠습니다. 참고로 상기 그림에서는 Size Ref. B 로 표기되어 있습니다.

 

 

 

 

이렇게 케이블(Cable), 케이블글랜드(Cable Glands), 그리고 슈라우드(Shroud)가 준비되었다면, 하기와 같이 "A" 부분을 살펴봐주시기 바랍니다.

 

 

 

고깔모양에서 각 치수별 구분선을 육안으로 확인하실 수 가 있는데요, 

이는 여러방법으로 케이블의 외경을 측정한 뒤, 상기의 A 부분에서 적합한

외경사이즈, 즉 절단부부분을 체크하기 위함입니다.

 

현장에서 요구되는 사이즈에 알맞도록 Tools (가위 또는 칼 등)을 이용하여, 단면적이 균일하도록 잘라내고, 케이블글랜드가 없는 상태에서 해당 케이블에 끼워 사전에 가공부의 사이즈가 적합한지 확인, 점검 및 수정을 합니다.

 

 

 

적합가능한 상태가 되면, 케이블과 슈라우드가 체결된 상태에서, 케이블글랜드의 체결작업을 시행합니다. 

 

 

 

 

Enclosures 또는 Junction Boxes, 그 밖의 다양한 Equipment 등의 Entry에 케이블글랜드의 체결을 정상적으로 마치고, Shroud를 이동하여, 하기의 그림에서와 같이 케이블글랜드를 감싸주게 되면, 관련 설치가 모두 마무리됩니다.

 

 

 

과거 현장에서는 PCP Shroud, PVC Shroud, 심지어 수축튜브형태 등이 사용되어 왔으나, 최근 트랜드를 선도하는 On-shore, Off-shore 주요 방폭공사 및 전기공사에는 화재폭발시 연기나 그을음이 적고 인체에 유해한 가스영향이 적으며 내환경성까지 갖춘 TPE Shroud 가 대부분 채택되어 사용되고 있습니다.

 

 

 

 

Material :

Manufactured in Low Smoke and Fume, Halogen Free TPE material with excellent UV, ozon and weathering resistance.

 

 

Color :

Black supplied as standard, other colour options are available

 

 

 

 

Technical Data

Hubbell, 허벨, Hawke, 호크, Shrouds, Shroud, 슈라우드, PVC Shrouds, PCP Shrouds, TPE Shrouds, LSFZH

Shroud Spec TCS02.pdf

Shroud Spec 20100128.pdf

2.Hawke Accessories for Cable Gland TSC01 201201 IDK R1.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Punch Tools for SB474 and PSG553RAC Cable Glands 소개자료

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 최근 Compound Barrier 구성의 케이블글랜드 니즈와 관련하여, 사용자편의성 및 안전을 고려한 Sealing 타입이 각광을 받고 있어, 새롭게 포스팅을 하게 되었습니다.

 

HAWKE INTERNATIONAL

Cable Galnds & Tools

Punch Tool

SB474 Cable Glands, PSG553RAC Cable Glands

 

현장으로부터의 경화시간의 단축, 편리한 체결구성, 깔끔하고 컴팩트한 구성 및 화학물질에 대한 안전등 전반적인 편의성과 공수절감등이 요구되는 조건에 최적의 솔루션으로 주목받고 있습니다. 

 

기존의 고형타입 또는 액상타입의 컴파운트(Compound)/퍼티(Putty)를 사용하지 않는 대신 케이블의 각 Core Size별로 오렌지색의 Seal을 타공하여 현장에서 즉시 사용할 수 있습니다.

 

HAWKE PUTTY (Compound for ICG653UNIV Series &., )

 

HAWKE PUTTY (Epoxy Compound Seal for ICG653UNIV Series &., )

 

 

 

HAWKE Barrier Seal for SB474 Series & PSG553/RAC Series

 

 

Punch Tools의 개봉이미지를 소개드리며, 기타 상세한 사항은 첨부의 자료를 참고하여주시기 바랍니다.

 

1. 먼저 Punch Tool 포장구성입니다. (No.1, No2 & No.3 종합구성의 제품기준)

 

 포장패키지를 열면, 하기와 같이 Punch Tools No.1, No.2, No.3 과 함께,

고정용 Stand 및 Orange 색상의 Barrier Seal 1개로 구성이 되어 있습니다.

 

위에서 내려본 내구구성품의 이미지입니다.

 

가까지 접근해서 본 이미지 구성입니다.

 

2. Punch Tools의 각 호수별(No.1, No.2, No.3) 별 Punch Hole의 사이즈가 다르게 구성되어 있음을 확인하실 수 있습니다.

 

각 툴의 끝단은 날카로우므로 보관 및 사용 또는 작업시 다치지 않도록 주의하시기 바라며, Barrier Seal 에만 적용되도록 가공된 Tools 이므로 다른 제품에 적용하지 않도록 하시기 바랍니다. 보관하실 때에는 안전처리를 기본적으로 해주시기 바랍니다. 

 

각각의 Punch Tools 들은 빨강색의 핸들부 상단에 No.1, No.2, No.3 라고 표기가 되어 있습니다.  

 

각각의 Punch Tools 들은 하기와 같이 측면에도 음각으로 No.1, No.2, No.3 라고 표기가 되어 있습니다.  사용하실 때 반드시 주의하여 확인후 작업을 진행해주시기 바랍니다. 

 

 

3. Cable Gland Size for Conductor 데이터입니다.

Cores Cross Section Area (㎟) 별, 최대 Core의 수가 지정되어 있습니다.

 

4. Punch Tool Size Details 입니다.

No.1, No2. No3. 별 Core Cross Section Area(㎟) 범위를 참조하시기 바랍니다.

 

5. Orange색상의 Barrier Seal 의 전면, 후면 그리고 측면의 이미지 컷입니다.

Max. No. fo Cores 가 7이므로 적정한 타공관련 가이드가 양면에 표기되어 있습니다. 1~4 Core일경우, 5~7Core 일경우에 맞추어 적절하게 적용하면 되겠습니다.

 

하기의 이미지는 최대 7 Core용 단면입니다. 

 

Barrier Seal 의 측면 이미지입니다.

 

6. Punch Tools 의 고정 Stand 입니다.

 

Punch Tools Stand 안쪽의 모습니다.

 

 

7. Punch Tools 의 고정 Stand 바닥면의 붉은색 원판에 Barrier Seal을 올려놓고, 타공 방향을 정합니다.

 

Barrier Seal의 방향을 정하고 정해진 위치에 올려놓은 이미지 입니다.

 

Barrier Seal을 셋팅후 상부에서 내려다본 이미지 입니다.

 

 

8. Punch Tools 의 고정 Stand 바닥면의 붉은색 원판에 Barrier Seal을 올려놓고, 타공 방향을 정했으면, 적정 툴의 번호(No.1, No.2, No.3) 를 선정하고 Seal상의 가이드를 고려하여 위치별 타공을 하면 됩니다.

 

9. 각 조건셋팅이후 타공위치를 정확히 맞추어 Punch Tool의 헤드부를 눌러 수동으로 타공하게 됩니다. 

 

10. Barrier Seal 의 정 중앙에 1개를 타공한 사진입니다. 

 

 

11. Barrier Seal 을 사용하는 대표적인 케이블글랜드 SB474 Series 입니다. 

Barss (Standard) 재질의 사양이며, 측면의 이미지 입니다.

 

SB474 Cable Glands 을 분해하면 하기와 같이 크게 3가지 파트로 나누어 집니다.  체결용 유니온 후진된 모습입니다.

 

체결용 유니온을 임의 전진해 놓은 이미지 입니다.

 

SB474 세가지 구성에 대해 상부에서 내려다본 이미지 1 입니다.

 

SB474 세가지 구성에 대해 상부에서 내려다본 이미지 2 입니다.

 

SB474의 Female 측 장치 상부이미지 입니다.

 

SB474의 Female 측 장치에 Barrier Seal 이 놓인 이미지 입니다.

 

SB474 케이블글랜드에 케이블없이 Barrier Seal 을 체결하기 직전모습입니다.

 

SB474 케이블글랜드의 Male 측 기본 이미지 입니다.

 

SB474 케이블글랜드의 Female 측 기본 이미지입니다.

 

 

12. Barrier Seal 을 사용하는 대표적인 케이블글랜드 SB474 Series 와 Punch Tools 과의 조합구성입니다. 

 

 

 

13. Barrier Seal 을 사용하는 대표적인 케이블글랜드 PSG553RAC Series 입니다. 

이상으로 HAWKE SB474 및 PSG553RAC Series 에 사용되는 Barrier Seal 과, 케이블별 구성체결을 위한 전용 Punch Tools 에 대해 간단히 살펴보았습니다. 최근 Onshore, Offshore 의 다양한 애플리케이션에서 안전하고 신뢰할 수 있는 Harsh & Hazardous Solutions 이 요구되고 있으며, 많은 니즈와 함께 까다로운 사양이 많이 발생되고 있는 가운데, 여러분의 환경에서 현명한 선택의 폭이 하나 늘었으면 하는 바람입니다.

 

 

 

Technicla Data

HUBBELL, HAWKE, Cable Gland, Barrier Seal, Compound Barrier, Barrer Sealing, Putty, SB474, SB/474, PSG553RAC PSG/553/RAC, PSG553/RAC, ICG/653/UNIV, ICG653UNIV, ICG653/UNIV, ICG653/Universal

SB474 Spec 20141114.pdf

SB474 Assembly 201603XX R.pdf

SB474 Assembly Tool Manual.pdf

PSG553RAC Spec 20141114.pdf

PSG553RAC Assembly 201603XX Q.pdf

1.Cable Glands-Group ll.pdf

2.Hawke Accessories for Cable Gland TSC01 201201 IDK R1.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

  

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

HUBBELL 허벨그룹 프로덕트 및 시스템 라인업소개 2015

 

안녕하세요 TIATIP 입니다.

해마다 새롭게 조정/개편되는 허벨그룹 프로덕트, 시스템 및 서비스 라인업에 대해

2015년말기준으로 관련자료를 소개드리고자 합니다.

 

허벨의 세가지 플랫폼인 HES, HLI 그리고 HPS 에 대해 많은 관심을 부탁드리겠습니다.

Hubbell Corporate Overview

Hubbell Incorporated is an international manufacturer of quality electrical and electronic products for a broad range of residential and non-residential construction, industrial and utility applications. With 2015 revenues of $3.4 billion, Hubbell Incorporated operates manufacturing facilities in the United States and around the world. The corporate headquarters is located in Shelton, CT.

 

 

 

 

Hubbell’s three platforms

– Hubbell Electrical Systems (HES), Hubbell Lighting (HLI) and Hubbell Power Systems (HPS) – offer a unique set of brands and products.

 

 

 

 

1. Hubbell Electrical Systems

Offering an array of electrical and electronic wiring devices, wire management systems, occupancy sensors and specialized wiring products for the marine and healthcare markets. A comprehensive source of electrical boxes, fittings and enclosures for a variety of world-wide markets including harsh / hazardous location, commercial and residential markets. Innovative solutions for high voltage power supplies and test equipment, heavy duty cable management, industrial, outdoor and hazardous location communications equipment.

 

 

 

Hubbell Electrical Systems (HES), headquartered in Shelton, Connecticut, includes the original business started in Bridgeport, Connecticut by Harvey Hubbell in 1888, the Wiring Device Kellems division. This group is now comprised of 30 different business units and a staff of more than 6,300 employees worldwide. Its success was born from excellent leadership, employee and customer loyalty, high quality products, and a dedicated sales force. HES offers a variety of products for the commercial, industrial, residential and institutional markets, including harsh & hazardous environments.

Brands:

 

 

2. Hubbell Lighting

Provides a full range of indoor and outdoor lighting products for commercial, industrial, institutional, sports lighting, landscape and residential markets, including green initiatives for vacancy sensors and daylight harvesting controls.

 

 

Hubbell Lighting (HLI) headquartered in Greenville, South Carolina, is a leader in lighting technology. HLI is ranked among the top lighting companies in the world with more than 20 brands and 3,000 employees. Their applications cover countless markets, including commercial, outdoor, industrial, hazardous location, lighting controls, emergency and exit, and downlighting and track lighting systems.

Brands:

 

 

3. Hubbell Power Systems

Providing a broad line of products and components to serve the utility industry and support the infrastructure for transmission and distribution of electrical power throughout the globe.

 

 

Hubbell Power Systems (HPS), headquartered in Columbia, South Carolina, operates power utility facilities in the US and other parts of the world. With more than 3,600 employees, HPS supplies products that deliver power to millions worldwide and competes in the generation, transmission, distribution, substation, communication, and commercial and industrial markets.

Brands:

 

 

 

 

 

 

Technical Data

허벨,킬락,샬밋,호크,Hubbell, Acme, Austdac, Bell, Bryant Electric, Burndy, Chalmit Lighting, GAI-Tronics, Gleason Reel Corp., Haefely Test AG, Hawke International, Hubbell Industrial Controls, Hubbell Marine Electrical Products, Hubbell Premise Wiring, Hubbell Wiring Device-Kellems, Killark Electric, Pulsecom, RACO, TYAMAC, Tettex Instruments, Transtar, Victor Lighting, Wiegmann, Wirecon, Alera Lighting, Architectural Area Lighting, Beacon Products, Columbia Lighting, Compass Products, Devine Lighting, Dual-Lite, HomeStyle Lighting, Hubbell Building Automation, Hubbell Industrial Lighting, Hubbell Outdoor Lighting, Kim Lighting, Kurt Versen, Precision-Paragon, Prescolite, Progress Lighting, Security Lighting Systems, Spaulding Lighting, Sportsliter Solutions, Sterner Lighting Systems, Whiteway, Anderson, Atlas, CDR, Chance, Chance-Civil, Electro Composites, Fargo Mfg. Company Inc.,Hubbell Cable Accessories, Hubbell Power Systems, Ohio Brass, PCORE Electric, Polycast, Quazite,USCO Power Switches

 

Hubbell brochure 2015 EN Rev5.pdf

Hubbell 2015 Annual Report.pdf

 

 

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

  

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

  1. 2017.07.31 16:41 신고
    댓글 주소 수정/삭제 댓글
    한국 귀사의 에이젼트 전화번호좀 알려주세요.
    감사합니다
  2. 2017.09.18 11:24 신고
    댓글 주소 수정/삭제 댓글
    안녕하세요 TIATIP 에디터입니다.

    문의주신 제품은 허벨그룹의 다양한 제품군 가운데, 일반산업형 전기자재 및 통신자재의 경우입니다. 따라서 하기 사이트를 통해 전문적인 상담지원이 가능하므로 직접 연락을 취해주시면 감사하겠습니다.

    한국허벨주식회사
    www.hubbell.kr

KILLARK Flame Arrestor KB Series 사양소개 및 제품 개봉기

 

안녕하세요 TIATIP 입니다. 최근 방폭위험지역에 대한 배관(파이핑)기술과 관련하여 많은 문의가 이루어지고 있는 플레임 어레스터(Flame Arrestor)에 대해 메이커 킬락(KILLARK) 제품위주로 간략히 소개드리고, 관련 이미지를 통해 이해에 도움이 되길 바랍니다.

 

 

 

 

KILLARK

Flame Arrestor

Explosion-proof Type

KB Series

 

 

 

 

Applications

The flame arrestor provides a means to connect gas analysis equipment and electro pneumatic devices’ pipe or tubing system through the wall of an explosion-proof enclosure.

 

Body Material

6061-T6 series aluminum provided as standard.

Optional stainless steel or brass for special orders.

 

 

 

 

Certification

ATEX Certified, IECEx Certified and c CSA us Certified

 

Specifications

Air flow = 83 + 15 / -25 SCFH at 5PSI
Pressure drop = 1.3 PSI at 100 PSI
Maximum flow pressure = 800 PSI
Volume = For use in enclosures with a maximum internal volume of 9526 cubic
inches or 160 liters.

 

 

Typical Installation

 

 

 

Dimension

 

 

 

실물개봉자료

 

 1. 샘플아이템은 KILLARK 사의 CAT No.: KBM20FAM16SS6 의 제품을 기준으로 하였으며, 재질은 Stainless Steel 316 으로 하기와 같은 나사산형식을 갖추고 있습니다.

- External Hub Thread Size : M20

- Internal & External Process Piping Thread Size : M16

 

 

2. 각각의 제품은 1PC 별로 안전하게 포장되어 있으며, 제품의 품번 및 기본사양과 관련한 내용으로 라벨이 부착되어 있습니다.

 

 

3. 포장내부에 들어있는 KILLARK Flame Arrestor 의 기본 이미지 입니다.

플레임어레스터의 External Thread 부분에 보호 캡이 장착되어 있습니다.

 

 

4. KILLARK Flame Arrestor 의 보호캡을 뺀 이미지컷입니다.

 

5. KILLARK Flame Arrestor 를 확대한 이미지 입니다.

 

 

6. KILLARK Flame Arrestor 의 바디에 표기되어 있는 각종 사양 및 인증관련 정보입니다.

 

 

7. KILLARK Flame Arrestor 의 세로, 후면 이미지 입니다.

 

 

8. KILLARK Flame Arrestor 의 세로이미지로 Internal Thread를  확인하실 수 있습니다.

 

 

9. KILLARK Flame Arrestor 의 내부 나사산의 확대이미지 입니다.

 

 

10. KILLARK Flame Arrestor 의 세로전환 이미지 입니다.

 

 

11. KILLARK Flame Arrestor 의 내부나사산 기준의 전체 이미지 입니다.

 

 

12. KILLARK Flame Arrestor 의 측면 이미지 입니다.

 

 

13. KILLARK Flame Arrestor 의 측면부 확대 이미지 입니다.

 

 

14. KILLARK Flame Arrestor 의 내부 상세 이미지(1) 입니다.

 

 

15. KILLARK Flame Arrestor 의 내부 상세이미지(2) 입니다.

 

 

16. KILLARK Flame Arrestor 의 측면 세로 이미지 입니다.

 

 

17. KILLARK Flame Arrestor 의 상단부 이미지 입니다.

 

 

18. KILLARK Flame Arrestor 의 상단부 상세 이미지 입니다.

 

 

19. KILLARK Flame Arrestor 의 External Thread 확대 이미지 입니다.

 

 

20. KILLARK Flame Arrestor 와 관련하여 검토가능한 악세서리 (LockNut, Sealing Washer) 의 참조 이미지 입니다.

 

 

21. KILLARK Flame Arrestor 와 관련 악세서리의 Assembly 이미지 입니다.

이는 메이커측의 공식추전자료가 아니며, 현장 상황표현을 위해 임의로 가공, 설정한 자료 입니다. 관련 악세서리는 HAWKE 사의 제품을 적용하였습니다.

 

Technical Data

허벨, HUBBELL, 킬락, KILLARK, 플레임 어레스터, Flame Arrestor, Flame Arrester, KB Series, KB1FA25, KB1FAM16, KBM20FA25, KBM20FA16, KBM20FAM16SS6, KBM20FA25SS6, KB1FAM16SS6, KB1FA25SS6

Flame Arrestor CAT 2015-2016.pdf

6.Killark Fittings IDK F 2015-2016.pdf

Note : Specifications are subject to change without notice.

소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

허벨 Hubbell Harsh & Hazardous Product Lineup (2015 Revision4)소개

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 새롭게 허벨그룹의 Harsh&Hazardous 카테고리에 추가된 브랜드를 소개드리고자 합니다. 기존의 브랜드에 대해서도 새로운 기술로 많은 라인업이 추가되고 신제품들이 출시되고 있으니, 자세한 내용은 해당 사이트를 통해 살펴봐 주시기 바랍니다.

 

 

 

HUBBELL

Harsh & Hazardous

The Complete Electrical Solution for Industrial Environments

Extreme environments demand superior performance, which is why you will find
Hubbell products and systems installed in many of the most arduous and safetycritical locations worldwide.

 

The Hubbell Harsh & Hazardous group combines dedicated, market leading brands within the Hubbell portfolio to provide a complete package for
companies operating in some of the toughest environments on the planet.

 

We are committed to providing quality products and services that will meet and exceed your expectations. Our principal activity is the design and manufacture
of rugged and hard wearing products. These include telephones and communication products, lighting, control gear and electrical connection products; all designed to operate primarily in extreme outdoor, hazardous and corrosive areas.

 

As a group, we encourage engineering excellence. We are driven to utilize leading edge technologies and manufacturing techniques to help you fulfill your
specific requirements. Our product ranges are designed and certified to many of the leading global standards:

 

 

 

■ Austdac (www.austdac.com.au)

 

 

Austdac was formed in 1983 to provide intrinsically safe (I.S.) telephone systems and communications equipment to the Australian coal industry, the business has grown over time and we now supply communications, gas monitoring systems, safety equipment, intrinsically safe lighting, power supplies and conveyor control equipment to coal mines and general industry in Australia and around the world. We can provide a complete range of solutions from deep underground, all the way up to the surface.

- Conveyor Control & Monitoring

- Safety Equipment

- Gas and Monitoring Equipment

- Power Supplies, Lighting and Monitoring

- Intrinsically Safe Telephone System

- Longwall Equipment

 

 

■ Chalmit (www.chalmit.com)

 

 

Chalmit was originally founded in 1910 to manufacture and supply equipment for the large marine market based on the River Clyde. Today, Chalmit is a world leading supplier of premium quality fluorescent, LED and HID lighting products for use in hazardous area, industrial and marine environments. To meet the
demands of global project specifications we can provide a complete product range that complies with all international codes and standards.

 

Chalmit luminaires are designed to operate in potentially explosive and corrosive atmospheres. Our products will function as required, when required no matter what the environmental conditions. Energy efficiency and photometric excellence are fundamental criteria in the Chalmit design philosophy.


Although Chalmit is predominantly involved with hazardous area and specialized industrial lighting, we are totally committed to the promotion of good and efficient lighting practices and we continuously strive to raise the standards in safety, performance and education in lighting.

 

- Evolution - Photometric Excellence

- Leading LED Design

- HID and Fluorescent Lighting

 

 

■ GAI-TRONICS (www.gai-tronics.com)

 

 

GAI-Tronics designs and manufactures rugged communications equipment and solutions for demanding environments worldwide; supplying PA/GA systems, evacuation systems and intercom equipment to industry and the public sector. The ability to withstand unforgiving extremes of temperature, moisture, contamination, sunshine, wind, dust and salt, make GAI-Tronics equipment perfect for remote and hazardous applications.


All products meet stringent safety specifications and are approved and certified by leading international regulatory bodies. Founded in 1946, GAI-Tronics equipment can be found on rail and road networks, oil and gas installations, sterile areas and public assistance locations. GAI-Tronics’ intercoms, paging systems, and telephones have been heard loud and clear for 60 years.

 

- Public Address, General Alarm & Evacuation Systems

- Industrial Telephones

- Intercom / Paging

 

 

■ HAWKE International (www.ehawke.com)

 

 

For those who demand quality, reliability and above all, safety, Hawke International is the obvious choice.


Hawke International has provided peace of mind to contractors,
installers and end users for over 55 years. Our innovative range of cable connection and termination products, specifically designed with the customer in mind, have gained worldwide approval and credibility for the testing conditions found in hazardous locations and hostile environments.


Our customers’ requirements for sustained safety and reliability under extreme conditions are Hawke's primary objectives. Furthermore our superior designs allow ease of installation, use long life materials and are manufactured to rigorous quality standards. All this provides the customer with unparalleled benefits of the lowest lifetime cost of purchase.


Hawke International recognizes that the demands of the customer base never stand still and we are therefore committed to the ongoing development of our products and features to provide improved safety, versatility, reliability and ease of use.

 

- Exe Enclosure Range

- Glass Reinforced Polyester PL Range

- Stainless Steel Series Range

- Ex Connector Range

- Cable Gland Range

 

 

■ KILLARK (www.killark.com)

 

 

Established in 1913, Killark has become a global provider of harsh and hazardous location products. The Killark range encompasses industrial and explosion proof equipment engineered to withstand the toughest extremes in climate from the dry and arid Middle East, tropical Asia, to the extreme climate of Canada.


Safety and reliability has been the cornerstone of our business for more than a century. Killark is dedicated to exceeding customer needs, with engineering solutions, new product development and on-time delivery during every phase of the project.


This commitment underpins our proven ability to supply lower cost total system solutions and savings over the entire lifetime of a project.

 

- Enclosures / OEM Solutions / Controls

- Distribution and Control Equipment

- Lighting

- Plugs and Receptacles

- Connectors and Fittings

 

 

■ Victor Lighting (www.victor-lighting.com)

 

 

Victor was founded in 1929 to supply hazardous area equipment including
lighting, cable couplers and connectors to the mining industry. From these
beginnings Victor Lighting has evolved to develop luminaires for a wide range
of hazardous areas above ground including the oil and gas industry. Over 80
years of experience in manufacturing hazardous area equipment, ensures that
Victor luminaires are built to the highest standards of quality and reliability.


As a company we have used our knowledge of hazardous and industrial environments to inspire a number of unique design concepts. The result is a range of innovative lighting solutions that combine quality and durability with excellent photometric output. Offshore or onshore, we believe there is a Victor luminaire to meet your lighting requirements no matter how arduous your environment.

 

- Unique Lighting Solutions for Hazardous Areas

- Innovative Wellglass Design

- High Performance and LED Solutions

- Floodlighting

 

 

■ BURNDY (www.burndy.com)

 

 

BURNDY is a leading manufacturer of electrical connectors,
installation tools, and cable accessories for standard, harsh,
and hazardous environments.

 

We have over 90 years of extensive experience in producing power and
grounding connectors, mechanical, battery, and hydraulic installation
tools, and wiring accessories such as cable ties and heat shrink tubing.

BURNDY is a major participant in the OEM, commercial and industrial
construction and maintenance segments of both the domestic and
international electrical construction materials market.

Today, BURNDY is known for providing individual customer solutions for
difficult applications along with offering standard connectors and tools.

For cables from #26 AWG to 2500 kcmil and above (0.3 to 1000 mm2 +),
we can tap, terminate or splice it for you. Our in-house lab capabilities
allow R&D efforts to support new product development as well as user
defined requirements.

 

- BURNDY® Grounding

- BURNDY® Installation Tooling

 

 

■ Cableform (www.cableform.com)

 

 

Founded in 1945, Cableform provides safe, reliable, and environmentally sound DC control solutions used in harsh industrial environments. As the world’s leader in the design and supply of Digital DC Motor Control Solutions for severe duty cranes, hoists, traction, and magnet control applications in steel, mining,
tunneling and traction industries, Cableform continues to develop innovative and patent protected solutions in partnership with our customers and vendors to increase the safety, reliability, efficiency and performance of equipment and processes.

 

- Mining Vehicle Traction Controls: Digital Control of DC Traction Motors

- Onboard Battery Chargers

- Linear Accelerator Units

- AC/DC Shuttle Car Control

- DC Modular Solid State Motor Controller

 

 

■ Gleason Reel (www.hubbell-gleason.com)

 

 

 

 

Since 1911, the Gleason Reel Corporation has been producing high-quality cable/hose management systems for demanding environments such as potash mines, steel mills, chemical plants, land-based & offshore drillings and more. Our products are manufactured in the USA at our Mayville Wisconsin facility.

 

- Gleason PowerTrak® (drag chain)

- Gleason Cable/Hose Reels

- Gleason Static Discharge Reels

- Gleason Festoon Systems

 

 

■ Hubbell Product (Burton) (www.hubbell.co.uk)

 

 

Hubbell Products (Burton) manufactures and supplies a range of electrical switchgear and control equipment suitable for industrial conditions and hazardous environments.

 

- Fuse Switches

- Hi-Tech Contactors

 

 

■ Hubbell Industrial Control Division (www.hubbell-icd.com)

 

 

Formerly produced by Siemens-Canada, these rugged, high performance DC
Devices are now manufactured in our Archdale, NC facility. They are in great
demand by industries needing reliable solid-state adjustable speed drives,
uninterruptible power supplies, fuel cells, crane controls, transit and rail
vehicles, gas and oil well drilling equipment, mining machinery, and more.

 

- Type 720 Series - 200 600V DC Contactor

- Type 264 Series - 400 600V DC Contactor

- Type 700 Series - 1250A 1000V SPNO DC Contactor
- Type 716 Series - 1600A 1500V SPNO DC Contactor

 

 

■ Metron Eledyne (www.metroneledyne.co.uk)

 

 

Metron Eledyne is a leading global provider of fire pump controllers,
power distribution equipment and custom controls. These products
are used in commercial, residential and industrial buildings, oil and gas
plants and petrochemical facilities. Metron Eledyne occupies a
modern engineering facility in Grantham England and enjoys a worldwide
reputation for its chemical and petrochemical projects.

 

- FD4e Series Fire Pump Controller

- MP600 Series Fire Pump Controller

- FD2e / Ex P IIB T4 Series Fire Pump Controller

- MP300-800 / Ex P IIB T4 Series fire Pump Controller

 

 

■ Powerohm Resistors (www.powerohm.com)

 

 

Powerohm Resistors is known as an innovative leader in the power resistor industry applying years of design and manufacturing experience to produce quality resistor solutions for the Automation and Power Distribution Industries.

 

Powerohm offers many resistor styles to optimize an efficient and economical solution for harsh and hazard environments. Standard element selections include case, wirewound, smoothwound, ventwound, edgewound, punched grid, and continuous ribbon.

 

- Dynamic Braking Resistors for VFD’s and Shunt Resistors for Servo Drives

- Dynamic Braking Chopper Modules

- Neutral Grounding Resistors (NGR) & High Resistance Grounding (HRG) Systems

 

 

■ RigPower (www.rigpower.com)

 

 

 RigPower manufactures and distributes several series of advanced design, quick connect/disconnect single pole electrical connector series that are rated up to 1,135 amps, 4,000 volts. RigPower’s growth over the past ten years has come about by introducing a new product each year during the Offshore Technology Conference in Houston, Texas.

 

- High Performance Cable Connectors

- RMP II™ Series

- VFD-1™ Series

- MCC-1™ & HP20™ Series

 

 

■ Vantage Technology (www.vantagexp.com)

  

 

Vantage Technology is the premier manufacturer of third-party certified electrical connectors for use in hazardous environments.

 

- Industry Leading Features

- Proven Reliability in Hazardous(Classified) Areas

- XP Star-line Victory Series

- XP Star-line Millennium Series

- Value Added Solutions

 

 

■ WIEGMANN (www.hubbell-wiegmann.com)

 

 

With over 85 years of extensive experience in the manufacture of electrical enclosures, Wiegmann specializes in extreme/corrosion environmental
protection. Enclosures are offered in 316SS, 304SS, aluminum and in non–metallic for severe service applications, as well as in carbon steel for more
traditional duty.

 

- Ultimate® Drive Enclosures

- Ultimate® Enclosures

- Floor Mount NEMA 4X Stainless Steel Double Door Enclosures

- JIC NEMA 4X Stainless Steel Single Door Junction Boxes

 

 

 

 

HUBBELL Harsh &  Hazardous

 

As a group, Hubbell Incorporated designs and manufacturers a wide range of
quality electrical and electronic products for non-residential and residential construction, industrial, and utility applications.


Hubbell Harsh & Hazardous is part of the Electrical Systems division. There are also many other Hubbell brands you may recognize. Further details on each brand can be found at www.hubbell.com.

 

Other Hubbell Electrical Systems Brands:

 

 

 

Hubbell Power Systems Brands:

 

 

 

Hubbell Lighting Brands:

 

 

Our brands are all long established and well respected businesses within each of their industries. To find out more about a specific brand visit the  websites listed.

  Hubbell brochure 2015XXXX EN Rev4.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

   

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Killark KDE Series Drain Breather 신제품 출시안내

 

안녕하세요 TIATIP 입니다. KILLARK(킬락)에서 새롭게 선보이는 Drain Breather, Breather Darin 제품군인 KDE Series에 대해 간략한 소개자료를 포스팅합니다.

 

 

Hubbell Harsh & Hazardous

KILLARK

KDE Series

Drain Breather / Breather Drain

for Harsh and Hazardous Environments

 

 

 

• cCSAus, ATEX, IEC Ex Certified for Class I Div. 2 & Ex e Zone 1 Hazardous Areas
• Small Compact Size With Low Profile-Supplied With 316 Stainless Steel Locknut
• Available in Fiberglass, 316 Stainless Steel, Aluminum & Brass
• Wide Chose of Thread Sizes, 1/2 NPT, 3/4 NPT, M20 & M25
• Type 4, 4X and IP66 Certified for Hose Down and Harsh Areas
• For Use in Ambient Temperatures Ranging From -55°C to +80°C

 

 

KDE Series Drain Breather

 

 

 

 

FEATURES-SPECIFICATIONS
Applications
When installed in the bottom of a thin wall enclosure the KDE allows water from
condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal.

 

 

Features
• Silicone o-ring supplied as standard and suitable for use in a -55°C to +80°C
temperature range.
• Varity of thread sizes 1/2 & 3/4 NPT, 1/2 & 3/4 NPSM, M20 & M25.
• Available in 300 series stainless steel, 316 stainless steel, aluminum and 30% glass filled nylon.
• Internal 316 stainless steel locknut supplied as standard. When tighten to
the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66
application.

 

 

Materials
• 303 or 304 stainless steel, 316 stainless steel, brass, aluminum or 30% glass filled nylon.
• Internal locknut 316 stainless steel.
• High temp silicone o-ring

 

 

 

 

Certificate

Class I, Div. 2, Groups A, B, C, D
Class l, Zone 1 & 2, Ex e / AEx e llC, A/Ex tb
Class II, Div. 1j & 2, Groups E, F, G
Class III, Ambient Temperature Range -55°C to +80°C
Enclosure Type 3, 4 & 4Xk IP66
Ex II 2 G D    CE 0539
Ex e IIC Gb
Ex tb IIIC Db IP66
Ta = -55°C to + 80°C


PATENT PENDING

CSA 2714851

CML 15ATEX3028X
IECE x QPS 15.0 0 0 2X 

 

 

Hubbell

Killark KDE Series Drain Breather

Catalog Number Logic : KDE - 1st   2nd   3rd

 

1st : Material Type

AL = Alum
BR = Brass
S3 = 303 Stainless Steel
S4 = 304 Stainless Steel
S6 = 316 Stainless Steel
GF = 30% Glass Filled Nylon

 

2nd : Plating Type

0 = Unplated
1 = Nickel
2 = Zinc
6 = Chromatise
8 = Electroles Nickel

 

3rd : Thread Size Type

M20 = M20 Metric
M25 = M25 Metric
050 = 1/2". NPT
075 = 3/4". NPT
050NPSM = 1/2". NPSM
0705NPSM = 3/4". NPSM

 

Technical Data

Breather Drain HKCS KDE.pdf

Breather Drain DPE Spec.pdf

Breather Drain FlameArrestor Cat 2014XXXX.pdf

Breather Drain CAT 2005XXXX.pdf

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

KILLARK KRS KRJ Series Plug KP-303E67 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 킬락의 KR 시리즈 플러그 및 리셉터클 가운데, 방위산업 및 우주항공에서 많은 적용이 되고 있는 KP 30 AMP Plug KP-303E67 에 대해 살펴보도록 하겠습니다.

 

 

 

Killark

KR Series Plugs and Receptacles

30 AMP 115/230 V.A.C. 7 AMP 460 V.A.C.

KRS KRJ Series Plug

KP-303E67

 

 

 

 

CAT No. and Technical Data

KP-303D23, KP-304D23, KP303-D45, KP-304D45, KP-303E45, KP-304E45, KP-303E67, KP-304E67, KP303D23, KP304D23, KP303D45, KP304D45, KP303E45, KP304E45, KP303E67, KP304E67

 

Killark Plug Receptacle PR.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 상담문의 및 기술지원

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Lighting 샬밋라이팅 Industrial Protecta Luminaire 사양소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 샬밋라이팅의 일반산업형 조명제품군 가운데 Chalmit Protecta Luminaire 사양에 대해 살펴보도록 하겠습니다.

 

 

Chalmit

Protecta Luminaire

Surface Mounted Fluorscent

 

 

 

 

The Protecta (Industrial) is a robust GRP fluorescent with high IP rating designed for use in the most arduous environments. It is constructed from the same GRP body design as the hazardous area versions. 
 
As such the industrial version features the Protecta's trademark quick-release GRP clamp bar which secures the hinged clear polycarbonate diffuser. This provides quick and easy access to the control gear.

All of the control gear is mounted on to the reflector/gear-tray which is fitted to the body. Ease of access to the lamps ensures that installation and maintenance times are kept to a minimum.

ATEX Categories 2 & 3 (Zones 1 & 2) hazardous area versions are available which are commonly used on Offshore Platforms, FPSO’s and FSO’s.

 

 

 

 

CAT REF.

PRGI/118/BI

PRGI/118/BI/EM

PRGI/136/BI

PRGI/136/BI/EM

PRGI/218/BI

PRGI/218/BI/EM

PRGI/236/BI

PRGI/236/BI/EM

NPRO4-0008

NPRO4-0012

SPOL4-100001

SPOL4-100002

SPOL4-100003

SPRO4-0002

SPRO4-0005

SPRO4-0006

SPRO5-0005

SPROT-0021

 

 

Technical Data

Protecta Industrial.pdf

 

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Zone 2 Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 방폭위험지역 Zone 2에 적용가능한 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Sterling II Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II s a quality and cost effective luminaire designed to provide instant glare free white light for Zone 2 hazardous areas.

The GRP body and polycarbonate diffuser is secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance. The protection is Ex n with IP65 sealing.

The Sterling II is designed as a single product for both Gas & Dust atmospheres and is certified under the ATEX 94-9-EC directive for Categories 3 G and 3 D. The range is also IECEx compliant.

The Sterling is suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

 

 

 

 

 

(2) Chalmit Sterling II Emergency Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II emergency fluorecent luminaire designed for Zone 2 areas with a 3 hour emergency duration. The GRP body and polycarbonate diffuser are secured with multiple stainless steel clips to ensure good corrosion resistance and allow rapid access for installation and maintenance.

The Sterling II is designed as a single product for both Gas & Dust atmospheres. It is certified with Ex n protection under the ATEX 94-9-EC directive for Categories 3 G and 3 D and has IP65 sealing. The range is also IECEx compliant.

The Sterling suitable for T8 tubular fluorescent lamps in 18/36/58W sizes. Electronic high frequency control gear is fitted as standard.

 

 

 

 

 

(3) Chalmit Sterling II Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II stainless is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear and high frequency ballast.

 

 

 

 

 

(4) Chalmit Sterling II Emergency Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

The Sterling II stainless emergency is a robust, high quality luminaire designed for Zone 2 environments where there is a high risk of mechanical damage. The emergency version provides safety critical lighitng for three hours in the event of a mains power failure.
 
The stainless steel body and polycarbonate diffuser is secured using multiple stainless steel clips ensure excellent corrosion resistance and IP sealing. The quick release clips also provide rapid access for installation and maintenance.
 
The stainless steel body is designed to provide high impact strength and resistance to those chemicals which might damage GRP. The range is suitable for T8 tubular fluorescent lamps in the nominal 18/36/58W sizes. The standard range has electronic control gear.

 

 

 

 

 

(5) Chalmit Protecta II Luminaire

Ex n Fluorescent / ATEX Category 3

The Protecta Category 3 Ex n luminaire combines the strength and integrity of the Category 2 increased safety enclosure with the Category 3 lamp and control gear package used in the Sterling. The range is suitable for T8 tubular fluorescent lamps in the nominal 18W and 36W sizes.

Protecta is constructed using glass reinforced polyester (GRP) and polycarbonate which resist saline and other corrosive environments. A key feature is the Protecta's rugged duribility. This comes from strength of the enclosure combined with toughened mounting points together and the very high degree of ingress protection.
 
The Zone 2 luminaire certified Ex n with IP66/67 sealing for ignitable gas and dust applications. The ATEX Categories are 3 G and 3 D.

The simple design and ease of access to lamps and control gear means that installation and maintenance can be completed quickly and efficiently. The Protecta offers the facility of four cable entries. The standard range has electronic control gear and all
emergency versions come  complete with 3 hour battery duration.

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋라이트 Zone 1 Fluorescent  제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 방폭위험지역 Zone 1 에 적용가능한  Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

(1) Chalmit Protecta III Luminaire

Ex e Fluorescent / ATEX Category 2

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas The rugged Protecta combines high quality and low maintance. It is constructed of a glass reinforced polyester (GRP) body and a polycarbonate diffuser to resist highly saline and other harsh, corrosive environments.

Major features of the luminaire are the strength of the enclosure and mounting points together wih the very high degree of ingress protection afforded by the simple reliable construction.
 
All the control gear is mounted on a gear tray. This ease of access to lamps and control gear ensures that installation and maintenance will be completed quickly and efficiently.

 

 

 

(2) Chalmit Protecta III Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

The Protecta III Ex e emergency luminaire is a technologically advanced and high quality fluorescent suitable for use in Zone 1 and Zone 21 hazardous areas. The luminaire incorporates comprehensive self testing features to ensure lamp, battery and supply integrity. The Protecta construction has a glass reinforced polyester (GRP) body and polycarbonate diffuser, this makes it highly resistant to saline and corrosive environments, ideal for use on an Offshore Platform or FPSO.

The Protecta fluorescent is available as both maintained and non-maintained versions. During emergency operation light output can be up to 50% of one lamp with 90 minute duration as standard.

Other key features of the luminaire include extreme durabilty due to the rugged enclosure design and toughened mounting points together combined with very high ingress protection. The Protecta's simple construction ensures ease of access to lamps and control gear making installation and maintenance both quick and efficient.

 

 

 

(3) Chalmit Protecta III Stainless Steel Emergency

Ex e Fluorescent / ATEX Category 2

The hazardous area Ex e Protecta III fluorescent is also available in a stainless steel body version. This product shares the technical features of the GRP bodied range but provides increased mechanical protection for the toughest of environmental conditions.

The durability of the stainless steel Protecta is ensured due to its construction from high grade stainless steel and a polycarbonate diffuser. The product is intended for applications where a risk of mechanical damage or exposure to chemical agents exist.

The enclosure also affords the high degree of ingress protection(IP66) required for use in Zone 1 and Zone 21 hazardous areas. The design  provides ease of access to lamps and control gear ensuring that installation and maintenance will be completed quickly and efficiently.

 

 

 

(4) Chalmit Lomond Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

The Lomond Ex d fluorescent is a traditional flameproof luminaire for use with linear and compact fluorescent lamps. It is suitable for Zone 1 and Zone 21 hazardous areas.

The Lomond is designed for applications are where white instant light is needed. The aluminium and glass construction is suitable for aggressive chemical environments such as paint spraying, which could otherwise attack plastics.

An emergency version with the 8W lamp is particularly suitable for over door lighting. This is designed for maintained operation as standard, a non-maintained emergency option is also available.

The design features a single flameproof path giving easy access for wiring, lamp replacement and to the control gear. The cable entry is the simple direct type using flameproof Ex d cable glands.

 

 

(5) Chalmit Acclaim Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

The Acclaim range fluorescent luminaires is certified for use in Zone 1 and Zone 21 hazardous areas. It is designed for use in offshore accommodation areas and control rooms where it provides recessible emergency and escape lighting.

Manufactured from zinc coated sheet steel the luminaire is suitable for installation in fire resistant ceilings up to solas B15 rating. The polycarbonate diffuser is available in clear, prismatic or with a glare control louvre. The mounting and cover details are flexible to allow luminaires to be recessed into a variety of ceiling types..

The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy. The emergency version has excellent light output and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration.

 

 

 

Please note: The Acclaim III is supplied with a high frequency self-test ballast. If using the Acclaim for sleeping quarters, please select the non-self test option (Suffix to Cat No. /NST).

 

(6) Chalmit Curie Elite Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

available in normal and emergency versions. It is designed for use in Oil & Gas and Marine environments where it provides working, recessible emergency and escape lighting. The body is made from zinc coated sheet steel and the diffuser from prismatic polycarbonate with textured side facing down. Where it meets the ceiling apeture the body is fitted with a flipper seal providing excellent sealing against surface irregularities.

The range is flexible to allow luminaires to be recessed into either plasterboard and modular (600x600mm & 600x1200mm) ceiling types. The control gear and batteries are mounted internally on a gear tray and access for lamp replacement and maintenance is simple and easy.

The emergency version has excellent emergency light output and duration in accordance with emergency lighting standards. Comprehensive self-testing periodically confirms the availability of sufficient emergency duration.

 

Please note: The Curie Elite is supplied with a high frequency self-test ballast. If using the Curie for sleeping quarters, please select the non-self test option (Suffix to Cat No: /NST).


 

 

 

 Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit Light 샬밋 Fluorescent 제품라인업 소개

 

안녕하세요 TIATIP 입니다.

오늘 이 시간에는 Chalmit Light 샬밋조명가운데 Fluorescent 타입의 제품군에는 어떠한 것들이 있는지 대략 살펴보도록 하겠습니다.

 

 

 

1. Zone 1

(1) Chalmit Protecta III Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(2) Chalmit Protecta III Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(3) Chalmit Protecta III Stainless Steel Emergency

Ex e Fluorescent / ATEX Category 2

 

 

 

(4) Chalmit Lomond Emergency Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(5) Chalmit Acclaim Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

 

(6) Chalmit Curie Elite Recessible Luminaire

Ex e Fluorescent / ATEX Category 2

 

 

2. Zone 2

(1) Chalmit Sterling II Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(2) Chalmit Sterling II Emergency Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(3) Chalmit Sterling II Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(4) Chalmit Sterling II Emergency Stainless Steel Luminaire

Ex n Fluorescent / ATEX Category 3

 

 

 

(5) Chalmit Protecta II Luminaire

Ex n Fluorescent / ATEX Category 3

 

3. Industrial

(1) Chalmit Protecta Luminaire

Surface Mounted Fluorscent

 

 

 

(2) Chalmit Protecta Emergency Luminaire

Surface Mounted Fluorescent

 

 

 

(3) Chalmit Protecta Stainless Steel Luminaire

Surface Mounted Fluorescent

 

 

 

(4) Chalmit Acclaim  Luminaire

Recessible Fluorescent

 

 

 

(5) Chalmit Sterling II Luminaire

Surface Mounted Fluorescent

 

 

 

(6) Chalmit Sterling II High Frequency Luminaire

Surface Mounted Fluorescent

 

 

 

(7) Chalmit Sterling II Stainless Steel Luminaire

Surface Mounted Fluorescent

 

 

 

(8) Chalmit Curie Luminaire

Recessible Fluorescent

 

 

(9) Chalmit Sterling II HF Stainless Steel

Surface Mounted Fluorescent

 

 

 

Technical Data

0.Chalmit Lighting Master CAT 20110611 02.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Chalmit 샬밋 Nevis LED Bulkhead 기술사양

 

안녕하세요 TIATIP 입니다. 오늘 이 시간에는 방폭위험지역 Zone1에 적용되는 샬밋 Bulkhead가운데 Chalmit Nevis LED Bulkhead에 대해 알아보도록 하겠습니다.

 

 

Chalmit Lighting

샬밋

Nevis LED Bulkhead
Explosionproof

Ex d e Luminaire
ATEX CATEGORY 2

The Nevis LED bulkhead is an ATEX rated bulkhead suitable for Zone 1 and Zone 21 applications.  The ultra bright LEDs will deliver an instant white light which has a longer life with light output & efficiency equivalent to a 70W HPS, making this a very cost effective luminaire.

 

The Nevis LED has these key benefits:
·          Long Operational Lifespan = 60,000 hours
·          Reduced Power Consumption = Cost effective
·          Operational at Low Temperatures -55°C

 

 

 

 

The Nevis has a side mounted increased safety terminal chamber, this eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

 

Designed for low profile applications, the bulkhead can be mounted on walls, handrails and ceilings - ideal for walkways or restricted height areas making the Nevis suitable for extreme environmental conditions.

 

 

 

 

Technical Data (Datasheet)

NevisLED.pdf

 

Notice : Specification are subject to change without notice.

주의사항 : 소개된 제품 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 상담은 하기 전문대리점을 통해 진행해 주시기 바랍니다.

 

 

 

 

국내 기술지원 및 구매상담

CUSTOMER SUCCESS IDK

CS CENTER 010.5353.9110

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke ATEX INLINE Connector, ControlEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke ATEX INLINE Connector, ControlEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다. 

 

 

 

HAWKE

ControlEx Termination Procedure

 

IMPORTANT NOTE


1. Hawke International does not recommend the use of their ControlEx Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable / semi-portable applications.


2. Barrier type glands must be fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components. Where connectors are terminated to topside umbilical cables, or portable connectors, a barrier type cable gland should always be used.


3. Hawke Ex Connector products are designed to be used in multi-voltage applications in circuits up to 660V AC/DC. It is
possible that on certain installations, there may be a mix of applications utilising different voltages on the Connector
products. In these instances, the installer / circuit designer must ensure that the plugs and sockets, or their associated
cabling, is clearly marked with the correct circuit voltage and current rating to ensure that the equipment being supplied is
matched correctly with the supply voltage. The variable insert positions which are a feature of the Connectors may also be
used to provide additional means of safety in these applications.

 

ControlEx Hook Up Procedure

 

1. Remove the CP/CR connector assembly, electrical insert and cable gland
(sold separately) from their packaging.


2. Terminate the cable into the cable gland in accordance with the manufacturer’s Instructions. Ensure a minimum tail length of 130mm.

 


 

3. Unscrew the rear engaging nut from the connector shell, removing the rear shell and keyway tube.

 

  

4. Slide the rear engaging nut over the rear shell as shown and screw the rear shell onto the entry thread of the cable gland ensuring there is a sealing washer between the gland and rear shell. A small amount of Loctite 638
or equivalent can be added to the cable gland thread at this stage to further help prevent loosening of the cable gland in portable applications.

 


Where a thread adaptor is being used, ensure a suitable IP seal is fitted between the cable gland and thread adaptor, and thread adaptor & running coupler. If the thread adaptor has an integral O-Ring, please ensure this makes full contact with the cable gland and running coupler to maintain the IP
protection. Check to ensure the captive O-Ring seal on the rear shell is in place and is undamaged

 

If the tab washer is being used, ensure this is fitted in the orientation shown. Use the flats on the rear shell to further tighten.

 

 

 

 

5. Cut the conductors to the length shown in the table below.

 

 

Note: Maximum tolerance is to allow for twisted cables and placement of cores within connector shell. If core spacing relative to insert numbering does not require excess core, use minimum cut lengths.

 

6. Strip back the insulation from the conductor’s as shown

 

 

 

 

7. Proceed to step 8 if internal earthing is not required.

 


NOTE: If internal earthing is not being used, the internal earth crimp must not be fitted and the grub screw in the rear shell must be removed

 


If earthing is required slide the internal crimp (supplied with CP/CR inserts) over the earth conductor and crimp using suitable tool. The stud can then be fitted into the rear shell and fastened using the grub screw shown. The stud on the earth crimp should not protrude from the outer diameter of the rear shell. Adjust if necessary.

 

 

8. a) Solder inserts – black (1.5 – 35mm²). Tin the conductors and fill the solder cups on the back of the inserts with solder as required Solder conductors in place and remove any solder spikes/excess from the solder cup. It is advised that heat shrink should be fitted over the connection at this point

b) Solder inserts – white (1.5 – 4mm2). As above, however, inserts should be soldered outside of the insert body and not fully assembled. If the contacts are to be solder terminated to the conductors, this must be done prior to insertion
through the rear contact retainer. It is advised that heat shrink should be fitted over the connection at this point Then follow (c ii & iii).


c) Crimp Inserts (1.5 – 4mm²) – white.

 

i) Crimp the conductors into the contacts using Weidmuller CTX CM 1.6/2.5 crimp tool HCT1, or Astro Crimp Tool HCT2. For 0.75 to 1.5mm² conductors use the 1.5 die. For 1.6 to 4mm² use the 2.5 die. It is advised that heat shrink should be fitted over the connection at this point


ii) Feed the contacts through the required numbered hole on the rear contact retainer and slide the insertion tool over the contacts up to the groove (one end for pin and one for socket). Clip the groove on the contact into position in the rear contact retainer with the tool.

 

 

 

iii) Align the main pip on the rear contact retainer with the key on the front contact retainer and slide over the contacts into position. Ensure the 2 smaller pips are also in line

 

 

d) Crimp Inserts (6 – 35mm²) – black. Undo the grub screws on the crimp barrels and slide them off the back of the contacts. Slide the conductors into the back of the barrel. Orientate the barrel so that the grub screws are pointing
outwards and crimp with a suitable crimp tool.


Push the barrels back onto the rear of the contacts and tighten grub screw into the groove on the contact. Back off grub screw half a turn on crimp barrels of 10mm² or larger to allow them to slide up and down the contact slightly

 

 

 

 

 

9. Clip spacer tube over conductors. Bend conductors slightly so that there is no or minimal gap between the insert/spacer tube and rear shell. On crimp insert of 10mm² or larger, slide the crimp barrels up and down the contacts to achieve this and then lock them in place by tightening the grub screw’s on the crimp barrels.

The insert has 3 pips, shown below, which should be located as shown. The main centre keyway should align with the centre of the spacer tube

 

 

 


NOTE: If being used on offshore topside applications where extreme temperature fluctuations or extreme levels of humidity may be present, it is advisable to use Dow Corning 4 Electrical Insulating Compound within the spacer tube to help prevent any possible humidity build-up. See point 15 below

 

 

10. Looking from the front of the connector shell, align the key on the insert to the required key inside the connector and slide the whole assembly into the shell. The EX16 connector has 3 keyways, and all other connectors have 5 possible keyways

 

 

 

 

11. Fully screw the rear engaging nut onto the thread on the connector shell, do not rotate the connector shell during this process. Tighten grub screw in rear engaging nut. There should be a gap visible of no more than 1mm between running coupler and shell

 

 

 

 

12. If the tab washer is being used, fix the tab using the button head screw to the rear engaging nut. Bend the tabs over the
flats of the cable gland.


13. If being used, terminate the external earth to the ring terminal crimp provided with the insert. Remove the button head
screw and spring washer from the rear engaging nut. Attach the crimp to the rear engaging nut as shown above


14. The connector is now ready for use. Please refer to the ‘Hook Up’ procedure.

15. If additional protection is required due to extreme atmospheric conditions, before inserting the assembled connector insert and spacer tube into the connector shell (step 10 above) Dow Corning 4 Electrical Insulating Compound can be used to fill the spacer tube. It is recommended that the running coupler be filled, along with the inner face of the insert to ensure no humidity can affect the contacts

 

 

ControlEx MK IV Connector Hook Up Procedure

 

Before commencing hook up, a visual inspection should be carried out on the cable / gland / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly components have loosened during transportation / cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the cable gland / connector assembly.

 

Areas to be checked:

 

 

 

 

NB: These areas should also be checked as part of a routine maintenance programme.

 

1) Turn off the power to the connectors.
2) Ensure the connectors are both set to the same keying position number and are of the same insert type.

 

 

 

 

3) Engage the CP connector with the BR / CR connector and align the key on the CP connector to the keyway on the BR / CR connector.

 

 

engaging nut clockwise onto the BR/CR shell. If the engaging nut will not screw on more than half a
turn, then the connectors are set to different keying positions.

 

 

5) Tighten the grub screw on the engaging nut.

 

6) If the optional locking pin is being used, this should be fitted at this stage, once the connectors are fully mated.

 

 

7) To disconnect, turn off the power, slacken the tightened grub screw, turn the engaging nut anticlockwise and remove the connector. If power is to be put through the connectors whilst de-mated, then a flameproof cap (available separately) must be fitted.

 

 

 

 

Technical Data

ControlEx MKIV Spec.pdf

ControlEx Spec.pdf

ControlEx MKIV Hookup Procedure 20131105.pdf

ControlEx MKIV Hookup Procedure 20131218.pdf

ControlEx Hook up procedure 20091202.pdf

ControlEx Inline connector termination 20091202.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Exd Connector, MK IV ControlEx 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 방폭커넥터 제품군 가운데, Contrl 관련 애플리케이션에 적합한 Hawke MK IV ControlEx 시리즈를 살펴보도록 하겠습니다.

 

 

 

HAWKE

Range For Harsh and Hazardous Locations

Hazardous Area Connector

MK IV ControlEx

IECEx/ATEX Certificate 

 

Note: Inline connector receptacle (CR) also available

 

 

Overview

 

The 4th generation ControlEx has been designed as a result of over 20 years of plug-and-socket experience. Manufactured in Stainless steel, the connectors provide unrivalled durability in hostile environments.

 

Both ATEX/IECEX, GOST & NEC certified, the connectors are Exd rated with an Ingress Protection rating of IP66 / IP67 and have industry leading DTS01 deluge protection.

 

 

 

 

The wide range of insert variables can handle up to 60 cores.

 

Other improvements include an all-new padlock facility, allowing the connectors to be securely locked to prevent accidental un-plugging of equipment and improved secure cap fixings.

 

The 4th generation ControlEx maintains many of the original features which made its predecessor extremely popular, including a variable keying system to prevent accidental cross-mating, modular gold-plated field crimpable inserts for ease of wiring and a fully inspectable flameproof barrier providing direct inspection of the flameproof seal.

 

 

 

 

 

Tamb: -40°C to +60°C.

II2 GD Exd IIC Gb, Extb IIIC T95Db.

IP66, 67

DTS01 deluge protected.

Certificate No's Baseefa12ATEX0014X & IECEx BAS 12.0006X.

 

ControlEx Features

 

(1) Easy Fieldwireable
Pin and socket inserts are numbered front and back to assist wiring and avoid
termination errors. Crimp and solder inserts available.

 

 

(2) Internal Keyway Spacer

Eases accessibility for termination as tube fitted after termination complete,
along with allowing easy installation into the required keyed position (See (4))

 

 

(3) Locking Pin
Optional locking pin provides the facility for mated connectors to be permanently
locked, via the use of a padlock, ensuring they cannot be separated under load. (Padlock not supplied)

 

 

 

 

(4) Keying Position
The unique visual 5 position insert keying system (3 on Ex16) along with the integral machined keyways prevent contact damage and ensures safe use by eliminating the possibility of misconnection of adjacent circuits.

 

 

 

(5) Running Coupler
Allows the connector to be installed onto a pre-assembled cable gland. Connector is rear loading and includes locking engaging nut.

  

 

 

(6) Acme Thread at Mating Interface
Unique ACME thread offers a smooth and quick fully mating action.

 

 

 

(7) Fully Inspectable Flameproof Barrier
Provides direct inspection of the flameproof seal and offers users the peace of mind that the connector is safe for installation.

 

 

 

(8) Anti-Rotation Device
Connector plugs and receptacles come complete with anti-rotation ring, which
when fitted between the connector and gland, helps to eliminate the possibility of the gland loosening, locking this in position.

 

 

 

 

 

Technical Data

 

ControlEx MKIV Spec.pdf

ControlEx MKIV Hookup Procedure 01.pdf

ControlEx MKIV Hookup Procedure 02.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Exd Connector, InstrumEx 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 방폭커넥터 제품군 가운데, Instrument 연결 애플리케이션에 적합한 Hawke InstrumEx 시리즈를 살펴보도록 하겠습니다.

 

 

HAWKE

Range For Harsh and Hazardous Locations

Hazardous Area Connector

InstrumEx

IECEx/ATEX Certificate 

 

Overview

This revolutionary design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. The InstrumEx connector is available with two insert options:

 

 

 

The 4-way option will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC & 2.5A (DC1) 60V DC.

 

The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC & 0.5A (DC1)60V DC. InstrumEx connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.

 

 

 

 

Tamb: -40°C to +60°C.

II2 GD Exd IIC ExtD T85.

IP66, 67

DTS01 deluge protected.

 

 

 

Technical Data

InstrumEx Spec.pdf

InstrumEx BRO 200808XX.pdf

InstrumEx Manual 20140403.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

  

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Live Demateable Connector, InstrumEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Live Demateable Connector, InstrumEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다.

 

 

 

 

HAWKE

InstrumEx Termination Procedure

 

IMPORTANT NOTE

1. Hawke International does not recommend the use of their InstrumEx Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable/semi-portable applications.


 

2. Hawke International recommends that barrier type glands are fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components.


 

3. Hawke Ex Connector products are designed to be used in multi-voltage applications in circuits: 4 way up to 250V AC, 4 way up to 60V DC and 8 way up to 60V AC/DC. It is possible that on certain installations, there may be a mix of applications utilising different voltages on the Connector products. In these instances, the installer / circuit designer must ensure that the plugs and sockets, or their associated cabling, is clearly marked with the correct circuit voltage and current rating to ensure that the equipment being supplied is matched correctly with the supply voltage. The variable insert positions which are a feature of the Connectors may also be used to provide additional means of safety in these applications.

 

 

 

 

CP / CR PROCEDURE


1) Unscrew the middle nut and back nut from the connector body and remove the armour clamping ring, spigot and insert. If you have purchased a connector with the optional backnut clamp and / or flange, slide these down the cable now (clamp first).

 

 

2) Remove the two seal assembly’s from the box and choose the required seal to suit the diameter of the cable outer jacket.

 

 

 

3) Insert the seal into the back nut, ensuring that the flange on the seal goes past the thread as shown.

 

 

 

 

 

4) Screw the back nut onto the middle nut. Do not compress the seal at this stage.

 

 

 

5) Slide the middle nut, backnut and armour clamping ring over the cable ensuring that the clamping ring is pointing in the required direction for the size of armour / braid. The alternative ring is supplied in the box.

 

                          

 

 

 

6) Strip back the outer jacket and armour (if present) as shown below.

 

 

 

7) Strip back the inner sheath level with the armour to expose the insulated conductors as shown below. If unarmoured, strip back to the outer jacket.

 

 

 

 

 

ARMOURED / BRAIDED CABLE


8) Push the inner sheath of the cable through the spigot.
Spread the armour / braid over the spigot until the end of the armour / braid is up against the shoulder of the spigot. Position the armour clamping ring onto the armour/braid.

 

 

 

9) Place the connector body over the spigot engaging the octagonal portion of the spigot. Move the middle nut up to meet the connector body. Place a 27 A/F spanner on the flats of the connector body and hold it in position.
Hand tighten the middle nut to the connector body, then turn a further ½ to ¾ turn with a 27 A/F spanner.

 

 

 

10) Unscrew the middle nut and visually inspect the armour has been  successfully clamped between the armour spigot and the clamping ring.

 

 

 

 

UNARMOURED CABLE
(If earth is to be terminated to connector shell. Otherwise proceed to step 15)


11) Strip back the earth conductor as shown below. If the earth is being carried through a contact as well as being connected to the shell, see fig b.

 

 

 

12) Crimp the flat blade earth crimp onto the earth conductor as shown below. Ensure the blade of the crimp is outermost as shown and that the crimp is pushed all the way up to the insulation of the earth conductor.

 

 

13) Push the conductors through the spigot and place the blade of the crimp on the taper of the spigot.

 

 

 

 

 

 


the blade of the crimp and lock into position by following steps 9 and 10 of the armoured / braided cable procedure.

 

15) Strip back the conductors as shown below.

 

 

 

 

 16) Remove the contacts from the contact retainers. Crimp the contacts onto the conductors using the Hawke crimp tool only (part number 901849). Ensure that the insulation of the conductor is up against the shoulder of the contact. When terminating 0.5mm² or 1.5mm² wire, ensure the conductor is pushed all the way into the smaller hole of the contact and that the contact is square in the crimp tool.


CAUTION: EXCESSIVE FORCE MAY BEND THE CONTACTS


Alternatively, conductors may be soldered into the contacts. Ensure that the cable installation is the same on the mating half. Hawke recommends that wiring details are placed on the cable outer jacket near to the connector.

 

 

17) Splay out the contacts and fit them through the slots in the rear contact retainer, ensuring they line up with the relevant numbered hole on the front contact retainer (ensure keys are aligned - see step 18). Unused contacts
should be omitted if not required to ease assembly.

 

 

 

18) Slide the front contact retainer over the contacts and snap into place with the rear contact retainer. Push the clips of the rear contact retainer firmly down to ensure they are not protruding (will only fit in the correct orientation).

 

 

19) Slide the insert into the connector body, aligning the half round key on the rear contact retainer with the required half round keyway in the connector body. (The colour coded or numbered keying position is shown on the front of the connector body. No colour coding or numbering for default 12 o’clock position – see picture inset). It should be noted that colour coded and numbered connector bodies are mutually interchangeable. Push the octagonal portion of the spigot into the connector body.

 

 

20) Slide the middle nut over the clamp / spigot and hand tighten onto the connector body, then further tighten ½ to ¾ of a turn with a 27 A/F spanner while holding the front shell with a 27 A/F spanner

 

 

 

 

 

21) Hand tighten the backnut onto the middle nut. Further tighten 1 to 1 ½ turns with a 27 A/F spanner while holding the middle nut with a spanner.

 

 

 

22) If the optional mounting flange is required, slide the flange over the backnut and position on the middle nut. Align the grub screw with one of the flats and tighten. If the flange is being used on a CR connector, it may also be
placed on the connector body as shown over.

 

 

23) If the optional cable clamp has been purchased, tighten the screws on the clamping bars equally until the clamping bars touch the cable. Tighten each screw a further 2-4 turns or until adequately clamped.


DO NOT OVERTIGHTEN AS THIS COULD DAMAGE THE CABLE.


If the cable clamp is being used with unarmoured cable, the connector should be earthed via the crimp with a 4mm² conductor.

 

 

 


24) Screw the cap back onto the connector. Stick the corresponding round colour coded / numbered sticker onto label in the circular space provided.
(white = 12 o’clock / Position 1)

 

 

25) The connector is now ready for hook up. Please refer to the hook up procedure.

 

 

BR PROCEDURE
1) The BR connector is supplied ready terminated with tails.
Simply fit into suitable junction box / equipment as required. To maintain the IP rating of the equipment, a sealing washer should be used (available separately) as shown below.

 

 

2) Terminate the conductors and earth wire inside the junction box / equipment.


3) The connector may also be earthed externally via the crimp with a 4mm² conductor if required.

 

 

4) The connector is now ready for hook up. Please refer to the hook up procedure.

 

HOOK UP PROCEDURE

 

WARNING:
Only the socket insert is allowed to remain energised while de-mated. If being used with bi-directional signals, isolate elswhere before connecting / disconnecting.

 

Before commencing hook up, a visual inspection should be carried out on the cable / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly components have
loosened during transportation / cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the connector assembly.

 

1) Remove connector caps.


2) Ensure the connectors are both set to the same keying position colour or numbered (no colour or number for default 12 o’clock position on BR/CR) and are of the same insert type.
It should be noted that colour coded and numbered connector bodies are mutually interchangeable.

 

 

3) Engage the CP connector with the BR / CR connector and align the keyway on the CP connector to the key on the BR / CR connector.

 

 

 

4) Engage the two connectors by screwing the engaging nut clockwise without interruption onto the BR/CR shell. If the threads will not engage, the connectors
are set to different keying positions.

 

 

5) If anti-vibration protection is required, tighten the grub screw on the CP shell.

 

 

6) To disconnect, slacken the tightened grub screw, turn the engaging nut anti-clockwise and remove the connector. Fit the caps.

 

Technical Data

InstrumEx Spec.pdf

InstrumEx Manual 20140403.pdf

InstrumEx BRO 200808XX.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Power Connector, PowerEx Termination Hook up Procedure 자료

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke Power Connector, PowerEx 시리즈의 Termination Hook up Procedure 관련 자료를 소개합니다.

 

 

Hawke

PowerEx Termination Procedure

 

IMPORTANT NOTE
Hawke International does not recommend the use of their Power Connectors in applications where rigid PVC/SWA/PVC power cabling (typically to BS 6346 standards) is used in portable / semi-portable applications.


In addition, Hawke recommends that barrier type glands are fitted to flexible power and loose filled control cabling entering the connectors to maintain the Exd protection concept and to reduce the potential for core movements within the cable being transferred to the connector’s internal components. 

 

 

 

 

CP / CR PROCEDURE
1) Terminate the cable into the Exd cable gland as per the manufacturer’s instructions. Consider at this stage the relative position of the phases.

 

 

 

2) Cut the conductors to the lengths shown. (For earth conductors which are being terminated to the earth ring (see step 6) but not carried through the contact, cut back X = 100mm for all sizes, see 10 - 13)

 

 

 

3) Strip back the insulation as shown. (For all earth conductors terminated via the internal earth ring, cut back the insulation flush with the gland entry thread, see 10 - 13).

 

 

 

4) Unscrew the rear engaging nut from the CP / CR shell. Remove the rear shell, spacer tube and insert from the CP / CR shell.

 

 

5) a) CONTACT SIZES 50 - 240mm².

Remove the screws from the front of the contacts only and push the crimp lugs out of the insert.

 

 

b) CONTACT SIZES 300 – 630mm².

Remove the screw from the plastic housing and remove the contact from inside.

 

 

 

6) Remove the internal earth ring from the rear shell sub assembly by backing off the 2 grub screws on the flats. If internal earthing is not required, the internal earth ring assembly along with the fixing grub screws should be discarded.

 

 

 

7) Crimp the lugs or contacts onto the conductors

(excluding internal earth wire if being used) using suitable crimp tool. (Hawke recommend Elpress crimp tools).
Contact sizes of 185mm² and larger should be adjacently double crimped as shown.

 


 

8) Feed the conductors through the rear shell assembly and screw this onto the cable gland entry thread ensuring the sealing washer is present.

 

 

 

9) Measure the distance from the front of the rear shell to the end of the crimp lug (50 – 240mm²) or contact (300 - 630mm²). It should be as shown. If not, remove the rear shell and add or remove the spacer washers supplied to get the required length. At least 1 washer must be present to maintain IP rating.

 

 

 

Internal earth procedure (skip to step 13 if not used or you have single phase connector).


10) Slide the internal earth ring down over the conductors with the lug going over the bare earth wire.

 

 

 

 

11) Position the internal earth ring inside the rear shell and tighten the grub screws into the groove on the earth ring. Excessive force could distort rear shell.

 

 

 

 

 

12) Tighten the 2 grub screws on the internal earth lug into the earth conductor as tight as possible so that the earth wire is sufficiently clamped. If earth is to be carried through to a contact, crimp contact prior to tightening grub screws.

 

 

 

 

13) Slide the spacer tube over the conductors and onto the rear shell.

 

 

 

 

14) a) CONTACT SIZES 50 - 240mm².
Push the insert assembly fully onto the crimp lugs. The insert should push inside the spacer tube. Refit the 4 screws into the ends of the contacts. Ensure these are fully tightened.

 

 

 

 

b) CONTACT SIZES 300 – 630mm².
Push the rear retainer over the contact. Place the split tube around the contact. Slide the front contact retainer over the contact and split tube. Slide the rear contact retainer over the rear of the contact and tighten the screw fully.

 

 

 

15) Slide the CP / CR shell over the insert and line the yellow dot on the insert up with the required keying position 1 to 5 marked on the CP / CR shell.

 

 

16) Screw the rear engaging nut fully onto the CP / CR shell.
Measure the distance between the front of the rear engaging nut to the back of the engaging nut which should be no greater than the distance shown.

 

 

 

17) Tighten down the 2 grub screws on the rear engaging nut.

 

 

 

18) Terminate the equipotential external earth to the ring terminal crimp provided if applicable. Remove the button head screw, spring washer and crimp from the rear engaging nut. Crimp the external earth wire into the crimp and reassemble.

 

 

 

19) Refit the protective or flameproof cap if applicable.

 

 

 

20) The connector is now ready for installation. Please refer to the hook up procedure.

 

 

 

HOOK UP PROCEDURE
Before commencing hook up, a visual inspection should be carried out on the cable / gland / connector assembly. The assembly should be checked to ensure that all of the assembly components are tight. If the assembly  components have loosened during transportation/cable installation, they should be retightened in accordance with the relevant assembly instruction sheets without twisting the cable in the cable gland/connector assembly. No hazardous gases should be present.

 

1) Turn off the power to the connectors.


2) Ensure the connectors are both set to the same keying position number, are of the same insert type and phase orientation.

 

 

3) Engage the CP connector with the BR / CR connector and align the key on the CP connector to the keyway on the BR / CR connector.

 

 

4) Engage the two connectors by screwing the engaging nut clockwise onto the BR/CR shell. If the engaging nut will not screw on more than half a turn, then the connectors are set to different keying positions.

 

 

5) Fully tighten the engaging nut with strap wrench if necessary and then tighten the grub screw on the engaging nut.

 

 

 

6) To disconnect, turn off the power (no hazardous gases should be present), slacken the tightened grub screw, turn the engaging nut anti-clockwise and remove the connector. If power is to be put through the connectors whilst demated, then a flameproof cap (available separately) must be fitted.

 

 

Technical Data

PowerEx Spec.pdf

PowerEx Manual 20070619.pdf

0.Ex Connectors Master Catalogue 20130819.pdf

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Exd Connector, PowerEx 기술사양

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 호크 방폭커넥터 제품군 가운데, Power 연결 애플리케이션에 적합한 Hawke PowerEx 시리즈를 살펴보도록 하겠습니다.

HAWKE

Range For Harsh and Hazardous Locations

Hazardous Area Connector

PowerEx

IECEx/ATEX Certificate 

 

Overview

The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications.

 

 

 

Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request.

 

 

Tamb: -40°C to +60°C.

II2 GD Exd IIC ExtD T85.

IP66, 67

DTS01 deluge protected.

 

 

 

 

Hawke Exd Connector Range For Harsh and Hazardous Locations, PowerEx

 

Technical Data

PowerEx Spec.pdf

PowerEx Manual 20070619.pdf

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Thread Conversion Solutions Fixed Elbows 496(F to F) Series 기술사양 소개 (UPD20140531)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 05월 31일자로 업데이트된 호크 케이블글랜드의 Thread Conversion Solutions 자료 가운데, 496시리즈 (F to F) 90˚ Fixed Elbow에 대해 살펴보겠습니다.

 

 

 

HAWKE International

A Division of Hubbell Incorporated

90˚ Fixed Elbow

496 Series

Hazardous Area

Flameproof Exd

Increased Safety Exe

Dust Protection Extb

Dual Certified ATEX/IECEx

 

 

 

  

 

Certification Details

Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2GD.

• Certifi cate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U.

• Operating Temperature Range -60°C to +200°C.

• Group II and III.

 

 

 

 

 

 

General Information

• Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel.

• M20 to M75 as standard.

• Other parallel male thread options available on request, including BSPP, PG, ET and NPSM.

• NPT female threads can also be supplied in sizes ranging from ½ " to 3".

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.

• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31.

• Ingress Protection: IP66.

• Assembly Instruction Sheet: AI 430.

 

 

 

 

 

Note:

Diff erent thread sizes and types are permitted at each end of the elbow, a step of one thread size is permitted between the two threads. Where diff erent thread types/sizes are supplied, the overall dimensions may increase in size.

 

 

 

 

 

Ordering Example :

496/M32 Female x M32 Female 1.5mm Brass Nickel Plated

 


Technical Data :

496 Spec IDK 20140531.pdf

494 IDK Spec 20140531.pdf

495 IDK Spec 20140531.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Thread Conversion Solutions Fixed Elbows 495 (M to M) Series 기술사양 소개 (UPD20140531)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 05월 31일자로 업데이트된 호크 케이블글랜드의 Thread Conversion Solutions 자료 가운데, 495시리즈 (M to M) 90˚ Fixed Elbow에 대해 살펴보겠습니다.

 

 

 

 

HAWKE International

A Division of Hubbell Incorporated

90˚ Fixed Elbow

495 Series

Hazardous Area

Flameproof Exd

Increased Safety Exe

Dust Protection Extb

Dual Certified ATEX/IECEx

 

 

 

 

 

Certification Details

• Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and
Dust Extb IIIC Db II 2GD.

• Certifi cate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U.

• Operating Temperature Range -60°C to +200°C.

• Group II and III.

 

 

 

General Information

• Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel.

• M20 to M75 as standard.

• Other thread options available on request, including BSPP, PG, ET and NPSM. NPT threads are not permitted.

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.

• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31.

• Ingress Protection: IP66.

• Assembly Instruction Sheet: AI 429.

 

 

Note:

Diff erent thread sizes and types are permitted at each end of the elbow, a step of one thread size is permitted between the two threads. Where diff erent thread types/sizes are supplied, the overall dimensions may increase in size.

 

 

 

 

Ordering Example :

495/M32 Male x M32 Male 1.5mm Brass Nickel Plated

 

 

 


Technical Data :

495 IDK Spec 20140531.pdf

496 Spec IDK 20140531.pdf

494 IDK Spec 20140531.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Thread Conversion Solutions Fixed Elbows 494 (M to F) Series 기술사양 소개 (UPD20140531)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 05월 31일자로 업데이트된 호크 케이블글랜드의 Thread Conversion Solutions 자료 가운데, 494시리즈 (M to F) 90˚ Fixed Elbow에 대해 살펴보겠습니다.

 

 

HAWKE International

A Division of Hubbell Incorporated

90˚ Fixed Elbow

494 Series

Hazardous Area

Flameproof Exd

Increased Safety Exe

Dust Protection Extb

Dual Certified ATEX/IECEx

 

 

 

Certification Details

• Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2GD.

• Certifi cate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U.

• Operating Temperature Range -60°C to +200°C. • Group II and III.

 

 

 

General Information

 • Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel.

• M20 to M75 as standard.

• Other parallel male thread options available on request, including BSPP, PG, ET and NPSM.

• NPT female threads can also be supplied in sizes ranging from ½ " to 3".

• NPT threads are not permitted on the Male threaded selection.

• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.

• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31.

• Ingress Protection: IP66.

• Assembly Instruction Sheet: AI 428

 

 

 

 

Note:

Diff erent thread sizes and types are permitted at each end of the elbow, a step of one thread size is permitted between the two threads. Where diff erent thread types/sizes are supplied, the overall dimensions may increase in size.

 

 

Ordering Example :

494/M32 Male x M32 Female 1.5mm Brass Nickel Plated

 

 

 


Technical Data :

494 IDK Spec 20140531.pdf

495 IDK Spec 20140531.pdf

496 Spec IDK 20140531.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

Hawke Cable Gland 321/R Series 기술사양 소개 (UPD20140611)

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 2014년 06월 11일자로 업데이트된 호크 케이블글랜드 321/R 시리즈에 대한 사양에 대해 살펴보겠습니다.

 

 

 

 

HAWKE International

A Division of Hubbell Incorporated

Cable Glands

321/R Series

Hazardous Area

Increased Safety Exe

Class-Zones-Divisions

Certified ATEX/IECEx/cCSAus

 

 

 

 

Application
The 321/R cable gland provides a seal and cable clamp on the
outer cable sheath and is intended for use on non-armoured
elastomer and plastic insulated cables. The cable gland certifi ed
Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22)
hazardous areas.

 

 

 

 

Technical Data

 

ATEX/IECEx
- Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2 GD.
- Certifi cate No’s: Baseefa06ATEX0059X and IECEx BAS 06.0016X.
- Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22.
- Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31.
- Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
- Deluge Protection to DTS01.
- Operating Temperature Range: -60°C to +100°C.
- Assembly Instruction Sheet: AI 452.

 

cCSAus
- Increased Safety AExe IIC and Dust AExtD Zone 21.
- Explosion-proof Class 1 Division 2, Class II Division 2 Groups EFG, Class III.
- Certifi cate No’s: CSA1205533 for Marine Shipboard Cable.
- Construction and Test Standards: UL 60079-0, UL 60079-7, ISA 60079-31.
- CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31, UL 2225

 

 

 

 

Features
• When used in Increased Safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure. The braid must then be suitably terminated inside the enclosure.
Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079 series standards for Exe applications.

• Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.

• Brass NPT entries are nickel plated as standard.

• Cable clamp provides required clamp and cleat function

 

Ordering Information
Format for ordering is as follows:
Certifi cation required i.e. ATEX / IECEx
Material & Finish i.e. Brass Nickel Plated
Alternative Seal (S), add suffix S to ordering information.

 

Example

321/R/C/M32/S/Nickel Plated Brass ATEX Certified

 

 

 

 

 

 

321R IDK Spec 20130129.pdf

321R IDK Spec 20140611.pdf

1.Hawke Accessories 2012 IDK.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

  

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (957)
TIA (92)