Run through타입에 적용되는 Hawke 121 Cable Gland 사양소개


안녕하세요 TIATIP 입니다.

최근 조선, 선박, 마린분야에서 비방폭 환경구역에 대한 케이블사용규정 건으로 코멘트되고 있는 Run Through 타입인 호크, Hawke 121 사양을 살펴보겠습니다.

간략히 소개하자면 Non-armoured용의 Single Compression타입입니다.



Hawke 121 Series



방폭지역에는 사용될 수 없는 일반 산업용(Industrial Type) 사양을 갖추고 있습니다. 기본적으로 Non-armoured elastomer 과 Plastic insulated cable의 사용에 적합니다. 생김새는 방폭형의 Exe타입용 케이블글랜드 321, Exd타입용 케이블글랜드 501421와 흡사함을 알 수 있습니다.


비방폭구역에서 Armoured 타입인 경우에 Run Through 타입으로의 코멘트가 반영되는 경우에는 121 을 적용하게 됩니다. 기본적으로 다음과 같은 제조사의 내용을 반영했기 때문입니다.



Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables.



Provides a cable retention seal onto the cables outer sheath.


Materials & Finishes

The 121 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.


Technical Data

Construction and test standards: EN 50262. BS 6121 Part 1. Type A2.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529.
Deluge protection to DTS01.
Operating Temperature Range: -60°C to +100°C.



호크, Hawke 121 Series


When used in Increased Safety applications, this Cable Gland may be used with braided cable where the braid and the outer sheat pass into the enclosure. The braid must then be suitably terminated inside the enclosure.


호크, Hawke 121 Series (Metric/NPT, Brass, Nickel Plated Brass, Stainless Steel)


121/2K/M16, 121/Os/M20, 121/O/M20, 121/A/M20, 121/B/M25, 121/C/M32, 121/C2/M40, 121/D/M50, 121/E/M63, 121/F/M75, 121/G/M80, 121/H/M90, 121/J/M100, 1212KM16, 121OsM20, 121OM20, 121AM20, 121BM25, 121CM32, 121C2M40, 121DM50, 121EM63, 121FM75, 121GM80, 121HM90, 121JM100


121/Os/1/2"NPT, 121/O/1/2"NPT, 121/A/1/2"NPT, 121/A/3/4"NPT, 121/B/3/4"NPT, 121/B/1"NPT, 121/C/1"NPT, 121/C/1-1/4"NPT, 121/C2/1-1/4"NPT, 121/C2/1-1/2"NPT, 121/D/1-1/2"NPT, 121/D/2"NPT, 121/E/2"NPT, 121/E/2-1/2"NPT, 121/F/2-1/2"NPT, 121/F/3"NPT, 121/G/3-1/2"NPT, 121/H/3-1/2"NPT, 121/J/4"NPT, 121Os1/2"NPT, 121O1/2"NPT, 121A1/2"NPT, 121A3/4"NPT, 121B3/4"NPT, 121B1"NPT, 121C1"NPT, 121C1-1/4"NPT, 121C21-1/4"NPT, 121C21-1/2"NPT, 121D1-1/2"NPT, 121D2"NPT, 121E2"NPT, 121E2-1/2"NPT, 121F2-1/2"NPT, 121F3"NPT, 121G3-1/2"NPT, 121H3-1/2"NPT, 121J4"NPT



Hawke 121 Spec.pdf


00_Hawke 호크 Accessories New.pdf


  • Cable Gland Accessories
  • Assembly Instructions adobe pdf logo
  • Cable Gland Data Sheet adobe pdf logo




    내 기술지원 및 구매상담처





    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    까다롭고 위험한 지역에서 실력을 발휘하는 호크케이블글랜드의 차별화된 특성 5가지


    안녕하세요 TIATIP 입니다.

    오늘 이시간에는 Hawke cable gland 가 Flameproof and Increased safety를 요구하는 Harsh and Hazardous Area를 만나 발휘되는 주요 장점 5가지를 살펴봅니다.





    1. Unique Rear Sealing System
    This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.



    2. Unique Inspectable Compound Chamber
    The revolutionary Hawke compound chamber has been designed with
    inspectability in mind. The pre-lubricated compound chamber can be removed
    once the compound has fully cured, allowing full inspection of the flameproof seal. If required minor surface voids can be repaired in situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal, resulting in reduced piece parts, as there is no longer a requirement to separate the seal from the compound chamber.






    3. Zero Cable Damage
    The unique Hawke diaphragm sealing system does not damage cable with
    'Cold Flow' characteristics. The diaphragm type seal is the only elastomeric seal to comply fully with EN 60079-14 and IEC 60079-14 and is therefore suitable on cables which would otherwise require barrier style cable glands.
    The Hawke diaphragm seal is also unique in that it is the only flameproof
    elastomeric seal that can be visually inspected in operation - A real benefit to
    ATEX inspectors.




    4. The Original Reversible Armour Clamp
    The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accomodate all types of cable armour or braid. Unlike many of our competitors the correct clamping orientation is marked clearly with a 'W', 'Z' or 'X' and backed up by the presence of a groove in the component. Hawke's RAC clamping system is also fully inspectable when positioned on the cable.






    5. Inspectable Deluge Seal
    Hawke's inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01.




    Indeed Hawke's deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which could potentially corrode the cable armour








    기술문의 및 제품상담

    고객성공  아이디케이





    Posted by TIATIP TIATIP

    댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

    BLOG main image
    공장자동화 공정자동화 오토메이션 전장 계장 통합자동화 통합전기전력 by TIATIP


    TI Story (972)
    TIA (98)
    TIP (194)
    TIEx (609)
    TIS (36)
    TiNoTe (10)
    TIO (23)
    The OtherS (1)