Hawke Additional NEC Approvals and CSA Approvals 사양소개

 

안녕하세요 TIATIP 입니다.

 

오늘 이 시간에는 Hawke International News, 케이블글랜드/케이블그랜드 제품군의 새로운 승인자료 업데이트분을 소개합니다.

 

 

 

501/421

501/414

501/423

501/453/RAC

501/453/Universal

ICG 623

ICG 653/Universal

CSB 656N

 

Additional NEC / CSA
Approvals for Cable Glands

Hawke International is pleased to announce an important addition to their comprehensive portfolio of international hazardous location approvals.

 

 

 

Canadian Standards Association, cCSAus approvals for both Canada
and America, including Classes and Zones and Classes and Divisions
now cover the following cable gland ranges for use with Marine
Shipboard Cables, Unarmoured and Conduits:-

501/421
501/421R
501/414
501/423
501/453 RAC
501/453
Universal
ICG623
ICG653
Universal
CSB656
CSB656N

 

Additional NEC / CSA Approvals

 

We are pleased to announce an important addition to our comprehensive portfolio of international hazardous location approvals. Canadian Standards Association, cCSAus approvals for both Canada and America, including Classes and Zones and Classes and Divisions now cover the following cable gland ranges for use with Marine Shipboard Cables and Conduits:-

 

These cable gland ranges will be marked with ATEX, IECEX, GOST-R, CEPEL- INMETRO and with cCSAus Class and Zones and Class and Division marking.

 

The additional marking includes:- the CSA Certification number, Class 1 Zone1, AExeII, AExdIIC, AExtD Zone 21, Class I Div 2 ABCD, Class II EFG, and Class III and covers gases, vapours and dusts.

 

These NEC/CSA cable gland ranges compliment the well established UL listed Hawke 7 Series cable glands.

 

This additional approval will provide an improved global certification approach to satisfy our customer’s requirements for a comprehensive range of safe and reliable, globally certified cable gland connection solutions.

 

 

 

 

 

 

NEC CSA Approvals Glands.pdf

1.Cable Glands-Group ll.pdf

1.Cable Glannds-Industrial.pdf

1.Cable Glands-Group I Mining.pdf

1.Cable Glands-American Series NEC,IEC.pdf

1.Cable Glannds-Selection chart.pdf

2.Hawke Accessories 2013 IDK.pdf

 

 

 

 

 

 

내 기술지원 및 구매상담처

CUSTOMER SUCCESS IDK

deric@jadongwha.com

www.tiatip.com

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절

까다롭고 위험한 지역에서 실력을 발휘하는 호크케이블글랜드의 차별화된 특성 5가지

 

안녕하세요 TIATIP 입니다.

오늘 이시간에는 Hawke cable gland 가 Flameproof and Increased safety를 요구하는 Harsh and Hazardous Area를 만나 발휘되는 주요 장점 5가지를 살펴봅니다.

 

 

 

 

1. Unique Rear Sealing System
This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The Rear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.

 

 

2. Unique Inspectable Compound Chamber
The revolutionary Hawke compound chamber has been designed with
inspectability in mind. The pre-lubricated compound chamber can be removed
once the compound has fully cured, allowing full inspection of the flameproof seal. If required minor surface voids can be repaired in situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal, resulting in reduced piece parts, as there is no longer a requirement to separate the seal from the compound chamber.

 

 

 

 

 

3. Zero Cable Damage
The unique Hawke diaphragm sealing system does not damage cable with
'Cold Flow' characteristics. The diaphragm type seal is the only elastomeric seal to comply fully with EN 60079-14 and IEC 60079-14 and is therefore suitable on cables which would otherwise require barrier style cable glands.
The Hawke diaphragm seal is also unique in that it is the only flameproof
elastomeric seal that can be visually inspected in operation - A real benefit to
ATEX inspectors.

 

 

 


4. The Original Reversible Armour Clamp
The original RAC clamping system was invented by Hawke over 10 years ago and is a well established proven performer in all conditions. Simply by reversing the clamping ring, the cable gland can adjust to accomodate all types of cable armour or braid. Unlike many of our competitors the correct clamping orientation is marked clearly with a 'W', 'Z' or 'X' and backed up by the presence of a groove in the component. Hawke's RAC clamping system is also fully inspectable when positioned on the cable.

 

 

 

 

 

5. Inspectable Deluge Seal
Hawke's inspectable deluge seal offers IP66 and IP67 sealing and is certified as 'deluge proof' by ITS in accordance with DTS01.

 

 

 

Indeed Hawke's deluge seal is so good that it exceeds the expectations of the offshore industry by not only preventing ingress into the equipment, but also into the cable gland, which could potentially corrode the cable armour

 

 

 

 

 

 

 

기술문의 및 제품상담

고객성공  아이디케이

deric@jadongwha.com

www.tiatip.com

 

 

 

 

저작자 표시
신고
Posted by TIATIP

댓글을 달아주세요:: 네티켓은 기본, 스팸은 사절


BLOG main image
by TIATIP

카테고리

TI Story (948)
TIA (92)
TIP (194)
TIEx (592)
TIS (36)
TIO (23)
TiNoTe (10)
The OtherS (1)