Baumer CleverLevel LBFS 시리즈 업그레이드 사양자료 소개

Baumer CleverLevel LBFS 시리즈 업그레이드 사양자료 소개

 

안녕하세요 TIATIP 입니다. 오늘 이시간에는 앞서 소개드렸던 Baumer의 Level measurement 애플리케이션을 위한 CleverLevel 제품군 가운데 LBFS의 새로운 업그레이드 사양을 소개해드리겠습니다.

 

 

Baumer

Level Measurement

CleverLevel

LBFS

Point Level Detection

 

 

 

 

Product highlights

- Save detection of liquids, bulk-solids and powders

- Short immersion length

- Excellent cleanability

- Ability for differentiation between foam and liquid

- Not sensitive to adherent or sticky media

- Status signaling by bright, blue LED 

- Compact stainless steel housing, sealed up to IP69K

 

User benefits

- One sensor for all applications

- Less disturbance of process

- Safe process with less downtime

- Visual observation of process

- Long life time even in wash-down areas

 

Field of application

CleverLevel® LBFS is designed for level detection in tanks and dry-run protection of pumps by empty pipe monitoring. It detects liquid, pasty
or oily media, but also solid-bulk materials like flour or plastic granulate.
The LBFS is capable of media differentiation by distinguishing the specific
properties, such as oil, water, foam and liquid.

 

Reliable performance is assured in any mounting position (from top,
bottom or side). Depending on the desired process connection, different
mounting options are available. Corresponding mounting aids and
adaptors for conventional process connections are available as an
accessory.

 

Two parallel switching outputs are available as Normally Open (NO) and
Normally Closed (NC) which is defined by PNP or NPN polarity when
placing the order.

CleverLevel® LBFS in its default configuration covers a major part of
potential applications. Where customer-specific configuration is required
because of difficult media (e. g. foamy or adhering), the interface programming tool FlexProgrammer 9701 allows for easy parameterization
of the optimum switching points by convenient teach-in functionality.
The measured data can be visualized on a PC for further parameter adjustment, for example time constant of a damping function and inverted
switching output logic.

 

 

 

 

Masuring principle

An electrode inside the sensor tip builds a capacitor together with
the surroundings. The medium with its dielectric constant (DC value)
is defining the capacitance value. A resonance circuit is created in
combination with a coil in the sensor head. Switching signal tripping is
according to the measured resonance frequency and the programmed
trigger thresholds.

 

 

Technical Data

Baumer, CleverLevel, LBFS, Level measurement, Level Sensors, Level Switches, Industrial weld-in sleeves, Hygienic adapters, Hygienic weld-in sleeves, Threaded adapters, FlexProgrammer 9710, Isolating barrier

CleverLevel LBFS DataSheet 201605XX.pdf

다운로드

 

 

 

 

 

국내 기술지원 및 구매상담처

CUSTOMER  SUCCESS  IDK

salespro.idk@gmail.com

* 소개된 제품 및 시스템의 사양, 재질, 치수, 기타 기재 내용은 제조공급사의 사정이나, 성능향상을 위해 예고 없이 단종, 대체되거나 변경되는 경우가 있으므로 양해를 부탁 드립니다. 기타 문의 및 상담은 공식대리점을 통해 진행해 주시기 바랍니다.  

Notice : Specification are subject to change without notice.