KOPEX-EX Conduit System, Fitting Instructions for Non-Metallic Braided EXBQ and EXBB Conduit 설치가이드
안녕하세요 TIATIP 입니다.
오늘 이 시간에는 Ex'e'타입의 Conduit System과 관련하여, EXBQ시리즈의 Fitting과 EXBB Series의 Conduit의 설치가이드를 전해드립니다.
Thomas&Betts
KOPEX-Ex Conduit Systems
EXBB
EXBQ, EXBQM, EXBQA
Over Braided Conduit
EXBB Conduit Series
Straight Male Conduit Fitting
EXBQ Conduit Gland/Fitting Series
EXBQM & EXBQA Series
Wrap sellotape around conduit and cut to length required. Apply the “nut out” over the braiding before removing tape.
Remove tape and pull back braided sheath. Apply “nut in” so that approximately five convolutions protrude.
Apply seal with chamfered edge towards the “nut in” three corregations in from the end of the conduit.
Loosely assemble body into the “nut in.”
If using with a plain hole, fully tighten nut into body to secure gland on conduit.
If using with a threaded entry, leave nut loose to allow gland to freely rotate
about the conduit. Screw body into entry, then fully tighten nut.
Position braiding over steps of “nut in” and secure with “nut out” ensuring braid is trapped between the nuts.
Special Conditions for Safe Use:
When the gland is used for increased safety or dust protection, the entry of the enclosure and the female thread of the gland is to be sealed (in accordance with IEC60079-14) in order to maintain the ingress protection rating of the associated enclosure.
CAT Number
EXBB,EXBQ,EXBQM,EXBQA,EXBB0310, EXBB0330, EXBB0350,EXBB0410, EXBB0430, EXBB0450,EXBB0510, EXB0530, EXBB0550,EXBB0610, EXBB0630, EXBB0650,EXBB0710, EXBB0730, EXB0750,EXB0810, EXBB0830, EXBB0850,EXBQM0304, EXBQM0404, EXBQM0505, EXBQM0606, EXBQM0707, EXBQM0808,EXBQA0304, EXBQA0404, EXBQA0505, EXBQA0606, EXBQA0707, EXBQA0808,EXBQA0305
Installation Guide
Technical Data
CAT02.06 KopexEx Hazardous Location Conduit Systems.pdf
CAT21.Adaptaflex and KopexEx.pdf
CAT26.02 KopexEx Stainless Steel Conduit Systems.pdf
DTS KOPEX Hazardous Area CAT02.pdf
DTS KOPEX Installation Guide.pdf
EXB EXBB Conduit Spec 20110522.pdf
EXBQ Fittings Spec 20120409.pdf
국내 기술지원 및 구매상담처
CUSTOMER SUCCESS IDK
'TIP > Thomas & Betts' 카테고리의 다른 글
| KOPEX-Ex, Galvanised Steel Core, EXLB Conduit 소개자료 (0) | 2014.07.11 |
|---|---|
| Thomas&Betts(TnB,T&B), Manual Crimp Tool, ERG4001 사양소개 (0) | 2014.07.10 |
| KOPEX-EX Conduit System, Fitting Instructions for Non-Metallic EXPQ 설치가이드 (0) | 2014.07.08 |
| T&B, Type A-Non-Metallic Liquidtight Conduit & Fittings, 3721-TB (0) | 2014.07.02 |
| T&B,TnB,Ty-Rap, Cable Tie TY27MFR 사양소개 (0) | 2014.06.23 |